Related
Just got an HD2,coming from my Hermes.
It's like going from a 19" monitor to a 32" monitor
Not new to flashing as I've been doing it for years on my Hermes,radios and roms.
New to the HD2 obviously so I need to get some things clear before I proceed.
Flashed HSPL 2.08 already.
I believe I need this version so that I can run android and win7?
Flashed my 1st rom,an energy one.
All is well except I'm not really keen on win 6.5 anymore.
Although most of my cabs work which is great
I want to try win7 and android.
Android
3 versions?
nand=runs from the phone?
magldr=?
SD=runs from the SD card?
Win7
Not quite sure as I've not read that far yet
Is flashing win7 same as flashing a win6.5 or do I need to do something extra?
Dual boot is working with HD2 or not?
Gen.Y DualBOOT v1.0.6.0 says no in the initial post.....
"Just to clear up the most asked question in this thread, this app will NOT work with the HTC HD2, because there is no android distro available yet for that platform (SnapDragon)"
....but that was over a year ago.
Anything else I need to know?
Your right on it all, magldr you install from the tri colour screen, its where Android is installed from on the nand, then you will need clock work mod, this is basically Android recovery, you can create back ups of your roms and also install Android roms directly from SD,
Win 6.5 is the past
I've not really done much with win7 Android is the way forward,
Gingerbread is the latest version of Android.
Look for clk versions in the Android nand thread
Clk = clockwork
Probably get started with
http://forum.xda-developers.com/showthread.php?t=769026
I've been on Android for a while now, the last time I dual booted I ran Win 6.5 from nand then I loaded android from SD
I'm using miui its a total re write and everything is themeable but is get used to Android first
Anything else
Sent from my HTC HD2 using Tapatalk
Hd2 toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
That will help, you will need to update your "leo_radio" aswell
Sent from my HTC HD2 using Tapatalk
Miui is here
http://forum.xda-developers.com/showthread.php?t=1117787
Sent from my HTC HD2 using Tapatalk
Thanks for all them
Not too sure how to 'flash' to an android?
or to load the cLK?
they come as disk image files (.img)
They come as .zip files.
Find the clk thread and learn how to install it, then you simply put the. Zip file on your SD and load clk then install Android from the zip
Sent from my HTC HD2 using Tapatalk
Ok
I'm going to use the Hd2 toolkit,this also cLK's my device.
Why does it need to partition my device and what's a good size?
I seem to have ran into some bother with fastboot command when doing cLK for dummies.
I'm getting.......
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
It partitions some of your SD to ext4 to make more internal memory for apps
I was about to write you a walk-through but I've stole this instead follow it step by step
Sent from my HTC HD2 using Tapatalk
langthang;12431253]How to flash ROM:
HD2 NAND Toolkit - Toolkit for HD2 Users (From ksubedi)
Use MAGLDR
1. Your phone need HSPL 2.08.HSPL first
2. Flash DFT_LEO_MAGLDR113_DAF
Link download MAGLDR113
- Go to Bootloader
- Connect your phone to PC
- Run ROMUpdateUtility.exe and follow guide step by step
- Phone auto reboot and goto MAGLDR113 menu
- Done
3. Flash Recovery
Link download newest Recovery 3.0.2.4: thanks seadersn
http://www.mediafire.com/?f81pamq6fbjmtw5
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
- Choose AD Recovery to go Recovery Menu
4. Wipe full data and Advance - Dalvik cache on Recovery Menu is recommand
- If you update from previous version, only need wipe cache/dalvik cache and all your data will saved
5. Flash ROM use Recovery
- Choose Install zip file from SD card
- Follow the guide
- Press Call button (Green button) to accept - Reject button (Red button) to Cancel
6. Reboot and see your result
Use cLK
Follow the guide in here:
http://forum.xda-developers.com/showthread.php?t=901305
Very easy way to prepare flash ROM use Tools here:
http://forum.xda-developers.com/showthread.php?t=1090783
How to enable Data2EXT in MIUI GINGER ROM (Thanks droidzone about these scripts):
Note: This feature require high speed SD card (Class 6 or higher) for best performance, the slower SD card work but the ROM is slow down
1.Partition your SD card
- Format SD card
- Create EXT Partition. There is the easy way to create EXT Partition by CWM Recovery:
+ Goto Recovery Menu
+ Cho Advanced -->Partition SD Card
+ Choose EXT size (Maximum is 2048Mb) and Swap size (Recommand is 128Mb)
+ Waiting until Done
2. Install Data2EXT feature:
- Install your ROM by CMW Recovery
- Install the A2SD Killer scripts file (attach file bellow)
- Reboot once after running the A2SD Killer and setup everything but don't install anything.
- Reboot to recovery once again and install the Data2SD Installer (attach file bellow)
- Reboot again and see result
ReInstall Data2EXT procedure:
http://forum.xda-developers.com/showpost.php?p=12999815&postcount=1744[/QUOTE]
Sent from my HTC HD2 using Tapatalk
Sent from my HTC HD2 using Tapatalk
Just can't seem to be able to install the recovery image.
Not getting past fastboot commands in windows
Going to try through android sdk...........
Have you installed windows drivers? And ran as admin?
Sent from my HTC HD2 using Tapatalk
whynot66 said:
Have you installed windows drivers? And ran as admin?
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
yes
placed the fastboot.exe and AdbWinApi.dll in the folder and it just sits there saying 'waiting for device'.
When you boot your hd2 into magldr then you scroll to "usb flasher" whilst usb is connected to pc? What happens, does windows recognise the device? Does it install drivers?
Sent from my HTC HD2 using Tapatalk
Download this http://www.mediafire.com/?f81pamq6fbjmtw5
Don't change anything in the folder just boot magldr click usb flasher connect usb and run daf.exe
Sent from my HTC HD2 using Tapatalk
whynot66 said:
When you boot your hd2 into magldr then you scroll to "usb flasher" whilst usb is connected to pc? What happens, does windows recognise the device? Does it install drivers?
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Went down the cLK route.
whynot66 said:
Download this http://www.mediafire.com/?f81pamq6fbjmtw5
Don't change anything in the folder just boot magldr click usb flasher connect usb and run daf.exe
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
I'll try that,thanks.
Ok both went well but not sure how to flash a magldr?
One says enter usb flasher and then run daf.exe in the rom but I don't see that in the rom I downloaded....CM7-v2.1.0-MAGLDR-CWM.zip
phone is sat in the magldr boot screen?
tried putting the rom onto the sd card with usb mass storage which went ok.
fails to flash when using boot AD Sd
load zimage
sd kernal open failed
it's a zip file?
__________________________________
Ok found another post that explains things a bit better,let's see what happens.......
The daf thing is old, now almost 99% of the ROMs use ClockworkMod. When you're on MAGLDR screen, using the volume rockers, go to USB flasher and select it by pressing the call button. Run the Android Toolkit and choose MAGLDR repartion, and select 150mb partition size from the left panel then click "Repartition" . After it finishs, go to magldr and choose "Android Recovery" or something similar, it will get you in an orange texted screen (CWM) . put the file you downloaded on your sd card and choose flash zip file, then choose it and let it do its thing .
kawazaki said:
The daf thing is old, now almost 99% of the ROMs use ClockworkMod. When you're on MAGLDR screen, using the volume rockers, go to USB flasher and select it by pressing the call button. Run the Android Toolkit and choose MAGLDR repartion, and select 150mb partition size from the left panel then click "Repartition" . After it finishs, go to magldr and choose "Android Recovery" or something similar, it will get you in an orange texted screen (CWM) . put the file you downloaded on your sd card and choose flash zip file, then choose it and let it do its thing .
Click to expand...
Click to collapse
Thanks for that
I'd just found that out.
Running Android now.
Thank guys I'm a flashaholic now
How do I get my music etc onto my SD card without booting into magldr?
Just plug the wire in whilst I'm android, you'll get a notification slide the top down and mount it
Sent from my HTC HD2 using Tapatalk
Hi,
I want to install this NAND ROM called HD2_NDT_MIUI_GINGER_DEVELOPMENT_V25.2SE_MAGLDR_Hon eycomb:
http://forum.xda-developers.com/showthread.php?t=1010498
How do I install it? I mean, it downloads in .rar file and there are 4 files (boot, data, META-INF and system)
How do I install this? I have installed before but that was much easier using dap.exe
xda_apprentice said:
Hi,
I want to install this NAND ROM called HD2_NDT_MIUI_GINGER_DEVELOPMENT_V25.2SE_MAGLDR_Hon eycomb:
http://forum.xda-developers.com/showthread.php?t=1010498
How do I install it? I mean, it downloads in .rar file and there are 4 files (boot, data, META-INF and system)
How do I install this? I have installed before but that was much easier using dap.exe
Click to expand...
Click to collapse
i think it is in zip format not rar.dont unzip it. just put zip file to sd.
give some information, do you have mgldr, is this your first rom etc.
mutil said:
i think it is in zip format not rar.dont unzip it. just put zip file to sd.
give some information, do you have mgldr, is this your first rom etc.
Click to expand...
Click to collapse
Thanks for the reply.
I have installed a ROM before but that was using RUU and just flashed and connected to USB. I didn't like the Android ROM so I reinstalled Windows 6.5 back to Stock.
I wanted to install this on NAND. How would I do this?
xda_apprentice said:
Thanks for the reply.
I have installed a ROM before but that was using RUU and just flashed and connected to USB. I didn't like the Android ROM so I reinstalled Windows 6.5 back to Stock.
I wanted to install this on NAND. How would I do this?
Click to expand...
Click to collapse
you can do it with a tool:http://forum.xda-developers.com/showthread.php?t=1090783
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot
you can also use these tutorials:
use the first one until you get mgldr (dont go beyond),then go the second
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=1044830
mutil said:
you can also use these tutorials:
use the first one until you get mgldr (dont go beyond),then go the second
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=1044830
Click to expand...
Click to collapse
Thanks for the reply.
When I first did a ROM change I was having a heart attack as didn't want to brick the phone.
Thanks for the instructions but if I am honest, I don't I could go through with that. Do you know of where I can download ROMs that come with RUU files? Like the Custom ROMs from HTC site?
If you flashed a ROM before, you are familiar with mgldr. If you flash mgldr there are only a few steps to flash a cwm ROM. Dont be so afraid. The possibility of breaking of phone is very low.
For ruu roms you should look at older ROM threads.
Sent from my Desire HD using XDA Premium App
mutil said:
If you flashed a ROM before, you are familiar with mgldr. If you flash mgldr there are only a few steps to flash a cwm ROM. Dont be so afraid. The possibility of breaking of phone is very low.
For ruu roms you should look at older ROM threads.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Thanks for the reply.
I tried to look for a video to do the second stage but couldn't find it. Do know where I can?
xda_apprentice said:
Thanks for the reply.
I tried to look for a video to do the second stage but couldn't find it. Do know where I can?
Click to expand...
Click to collapse
there is a tool to perform many steps, it has a video tutorial too.many people are happy with it:
http://forum.xda-developers.com/showthread.php?t=1090783
mutil said:
there is a tool to perform many steps, it has a video tutorial too.many people are happy with it:
http://forum.xda-developers.com/showthread.php?t=1090783
Click to expand...
Click to collapse
Thanks for your reply and appreciate your help.
Is is easier to drag it to SD card via Windows Mobile Device Centre? If so, will it slow down performance?
xda_apprentice said:
Thanks for your reply and appreciate your help.
Is is easier to drag it to SD card via Windows Mobile Device Centre? If so, will it slow down performance?
Click to expand...
Click to collapse
do you mean using an sd rom dual booting with winmo?
mutil said:
do you mean using an sd rom dual booting with winmo?
Click to expand...
Click to collapse
Yes that's what I meant. Is it easier?
Of course it is easier. It needs no extra operation such as hspl task 29 etc. But sense roms are slower with sd method. I recommend americandroid or miui roms. Go to sd thread, download americandroid unrar it. Find Android folder in it. Put Android folder to sd card. In winmo with file explorer go to the folder. First click ctrl, then click haret. Flashing may take up to 30 minutes.
Sent from my Desire HD using XDA Premium App
mutil said:
you can do it with a tool:http://forum.xda-developers.com/showthread.php?t=1090783
1)first get the recommended radio:2.15.50.14
2)download and install the nand tool kit
3)be sure you have hspl 2.08
4) go to bootloader screen(tri-color screen)
5)connect phone to pc ,see 'usb' at bottom
6)in toolkit click task29
7)go to bootloader again
8)in toolkit at bottom click browse and find your radio(2.15.50.14) click install ruu
9)go bootloader again
10)click install mgldr
11)in toolkit at left choose 150 and write 5 instead of 45
12)in mgldr menu go to usb flasher. be sure you see usb flasher....usb. if not change usb port etc.
13)in toolkit click repartition. be sure at left top mgldr repartition is chosen.
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
15) in mgldr-ad recovery-mounts and storage-mount usb storage-when pc sees phone send your downloaded rom.zip to sd
16)in mgldr: ad recovery-install zip from sd-choose zip from sd-find your rom.zip and choose it with call button.
17)after installation is complete reboot
Click to expand...
Click to collapse
I am confused about this step -
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
If this Nand why is the sd needed?
If you can, is there a complete video to this?
xda_apprentice said:
I am confused about this step -
14) this operation will wipe your sd !!!when it finishes,in mgldr go ad recovery-advanced-partition sd card-1024-0 (so you'll have 1 gb sd-ext partition)
If this Nand why is the sd needed?
If you can, is there a complete video to this?
Click to expand...
Click to collapse
if you have an eu-hd2 the phone's internal storage isn't enough, so sd-ext partition is a kind of trick to increase internal storage. this is a partition that is seen by android but not by windows.
you can google youtube for videos about flashing mgldr 1.13. but at my first time i mostly used written sources in xda (i think i referred links of mskip's tutorials)
dont be so afraid, hd2 is a strong machine.
i'll try to look at your questions often. just start your operation
mutil said:
if you have an eu-hd2 the phone's internal storage isn't enough, so sd-ext partition is a kind of trick to increase internal storage. this is a partition that is seen by android but not by windows.
you can google youtube for videos about flashing mgldr 1.13. but at my first time i mostly used written sources in xda (i think i referred links of mskip's tutorials)
dont be so afraid, hd2 is a strong machine.
i'll try to look at your questions often. just start your operation
Click to expand...
Click to collapse
Thanks for your reply. Without a step by step video I am unable to this. I find it all confusing
Hi,
I notice that some builds can be booted Via Magldr SD,
How do I do this,
I have Runny on NAND,
Do I just download the ROM add it to "Android folder" and hit "Boot AD SD" in MAGLDR?
Thanks,
Alex
Hi Alex,
I don’t think add ROM to Android folder is a good idea in order to not disturb your NAND build. Use different SD or rename your downloaded Android folder lets say Androidsd.
Steps for first boot:
1- Copy folder (Androidsd) to SD Card.
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "Androidsd" folder
7- Now select "BOOT AD SD" and wait boot
Next boot you can skip steps 3 to 6.
Have fun!
Petricanu said:
Hi Alex,
I don’t think add ROM to Android folder is a good idea in order to not disturb your NAND build. Use different SD or rename your downloaded Android folder lets say Androidsd.
Steps for first boot:
1- Copy folder (Androidsd) to SD Card.
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "Androidsd" folder
7- Now select "BOOT AD SD" and wait boot
Next boot you can skip steps 3 to 6.
Have fun!
Click to expand...
Click to collapse
When I select AD SD Dir the options are like "#@';"£$%"
they are completely random ?!?
alex.odell.2011 said:
When I select AD SD Dir the options are like "#@';"£$%"
they are completely random ?!?
Click to expand...
Click to collapse
thats fine but does it boot??
i copied nexus ics sd to the root but once i press call to enter to ad sd dir to choose the folder it goes back to the magldr menu and i dont access to sd card
alex.odell.2011 said:
When I select AD SD Dir the options are like "#@';"£$%"
they are completely random ?!?
Click to expand...
Click to collapse
I don't know what folders have you on ÿour SD card. You have to press vol down button till you reach the folder where you drop the ROM
Hi,
The folder is not listed, only these random names !?!
Does the ROM need to be zipped?
Thanks
alex.odell.2011 said:
Hi,
I notice that some builds can be booted Via Magldr SD,
How do I do this,
I have Runny on NAND,
Do I just download the ROM add it to "Android folder" and hit "Boot AD SD" in MAGLDR?
Thanks,
Alex
Click to expand...
Click to collapse
Hi,
I am to a newbie like you, see this thread it might be useful for you.
Also, see this post, you might find it useful.
Best Regards,
Vikas
vikas027 said:
Hi,
I am to a newbie like you, see this thread it might be useful for you.
Also, see this post, you might find it useful.
Best Regards,
Vikas
Click to expand...
Click to collapse
Good guides, but I already have NAND flashed
Just playing with sd card builds
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
May I ask a similar question? Can I have MAGLDR with winmo 6.5? All of the SD build of ICS I've been seeing only boots with MAGLDR, they don't have clrcad/haret.
ralfkof119 said:
May I ask a similar question? Can I have MAGLDR with winmo 6.5? All of the SD build of ICS I've been seeing only boots with MAGLDR, they don't have clrcad/haret.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1437463
This is a good build, it says magldr but there is a Claret and Haret in there also
You can install magldr to the phone please have HSPL and latest radio installed.
When you install magldr it WILL remove wm6.5 and you will have to re flash a wm6.5 rom to the phone, not the offical one as it will remove magldr,
You could always try flash ICS or WP7, there is a speed boost in nand
Thanks... So installing magldr will wipe my current winmo, and I'd have to flash a cooked winmo rom? Thanks for the info. I'd just like to clarify, so, I CAN have both magldr and winmo 6.5 both at the same time? And I can still switch between an android sd rom and the winmo 6.5?
ralfkof119 said:
Thanks... So installing magldr will wipe my current winmo, and I'd have to flash a cooked winmo rom? Thanks for the info. I'd just like to clarify, so, I CAN have both magldr and winmo 6.5 both at the same time? And I can still switch between an android sd rom and the winmo 6.5?
Click to expand...
Click to collapse
I do belive you can only dual boot WP7 and Android (Windows Phone 7 on NAND & Android on SD Card)
Not to sure about wm6.5 as I am not a dev,
You can defently dual boot wp7 and sd android though
http://www.addictivetips.com/mobile/what-is-magldr-and-how-to-install-and-use-it-on-htc-hd2/
ralfkof119 said:
Thanks... So installing magldr will wipe my current winmo, and I'd have to flash a cooked winmo rom? Thanks for the info. I'd just like to clarify, so, I CAN have both magldr and winmo 6.5 both at the same time? And I can still switch between an android sd rom and the winmo 6.5?
Click to expand...
Click to collapse
Just a thought, practicly all SD builds come with Claret and haret included, if not you can usually download some files or there included,
I think you should install NAND android if you like android or boot Haret and Claret,
sorry if i sound like a ****, I dont mean to be
And magldr WILL remove your WinMo
http://forum.xda-developers.com/showthread.php?t=1033537
Sorry for being misleading, you cannot dual boot WP6.5 and SD android via MAGLDR
:S
Awww... too bad. Can't let go of winmo 6.5 alex, a very important app is still sticking to this OS. ^_^
Thanks for the replies though. I'm happy with android SD for the moment. ^_^
Ok mate good stuff, most builds that say magldr/sd will have claret and haret others usually have a post to add in, good luck mate!
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Thanks for thanks :-D
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Just to bring this alive again,
Any ideas?
When in BOOT AD SD Dir I get random figures and not folders,
I am running TBD Runnymead with EXT4 partition,
Thanks,
For booting the ROM via MAGLDR follow the following options :
1.) Make sure its the SD build you have downloaded.
2.) Check the startup.txt file for "rel_path=foldername". If you named the folder with android as "Androidsd" then it should look like
"rel_path=Androidsd"
boot
3.) remove anything written after this like nand=1 or wince=1
4.) enter bootloader. When on magldr, go to Services > Boot Settings > AD SD Dir
select "Androidsd" as the directory.
5.) Boot AD SD
then u should be able to boot.
If you are not able to enter AD SD DIR tab, remove the memory card and reinsert.
ok here is what i got : i cant post link soo write "HTC HD2 T8585 - Black (Unlocked) Smartphone" in ebay and you will get it in sort its New HTC HD2 T8585 4.3" 3G 1GHz 5MP GPS WIFI WINDOWS MOBILE 6.5 SMARTPHONE
US SETTINGS, MONEY BACK, SHIP TO WORLDWIDE, 100% UNLOCK
MEMORY Phonebook Practically unlimited entries and fields, Photocall
Call records Practically unlimited
Internal 448 MB RAM, 512 MB ROM
Card slot microSD, up to 32 GB
dont look at the price its mach hier in my country soo am heppy...
soo now i got WM 6.5 and i want WM 7.5 + android
and i know **** about bouth... soo help me pliz step by step what do i install first
thanks doron
some one? youtube links , from links , jast tell me what to do in sort...
The Best Thing To Do with a new HD2
..
ok first thanks now i understen more and i have been reading in the form some stuff soo i see what is going in i stell have a few qustions
*can you tell me the steps what do i do first radio? android? and how do i doul boot soo i have bouth OS?
1. why WM 7.5 is not supported? (if you can be more Specific) becouse its not offisel, from i see on youtube its working fast and good all i need on it is skype,facebook, whatapp, waze ...? soo if you can explan more about it
2. why android 2.3.... and not android 4.0? he is officel i think... if you can explan more about it...
3. i have a 8 GB SD card is it good or should i buy 32 GB?
..
first of all thank you very mach!!!!! you help me a lot!!!
soo after looking in youtube and in the forum i desiided that
i want to have doul boot WM 7.5 and Android 4.0.4
soo i think i will take this roms:
http://forum.xda-developers.com/showthread.php?t=1534941 TIGER ROM|05 April [v4.5.0 ]
and
http://forum.xda-developers.com/showthread.php?t=1492488 [12.04.12][MAGLDR][SD][ICS 4.0.4]Unofficial AOKP31 v2 (AKA IceCreamTostidroid)
ok soo let see if i know what im doing soo i need to do my raido
HSPL3 Link: (http://forum.xda-developers.com/atta...5&d=1277138402)
and do http://forum.xda-developers.com/showthread.php?t=611787
with : Leo_RADIO_2.15.50.14**: MultiUpload
after this i do ? i need to doul boot? soo the fouom have a doul boot guid?
from what i understod i need to first install WM 7.5 soo is there a good guid to install it? and after i do it do i jast install the android or do i need to do somesing?
now thet i told you what i want to install can you help me and send me to the reight links and to tell me what i do first you know step by step
like : 1.*link* you do this with radio 7. bla bla
2. *link* you do this dwonload bla bla
thanks alot!!!!! doron
and if you recomend difrent rom pliz say and will my 8 GB can take the android + MW7.5?
doron050 said:
first of all thank you very mach!!!!! you help me a lot!!!
soo after looking in youtube and in the forum i desiided that
i want to have doul boot WM 7.5 and Android 4.0.4
soo i think i will take this roms:
http://forum.xda-developers.com/showthread.php?t=1534941 TIGER ROM|05 April [v4.5.0 ]
and
http://forum.xda-developers.com/showthread.php?t=1492488 [12.04.12][MAGLDR][SD][ICS 4.0.4]Unofficial AOKP31 v2 (AKA IceCreamTostidroid)
ok soo let see if i know what im doing soo i need to do my raido
HSPL3 Link: (http://forum.xda-developers.com/atta...5&d=1277138402)
and do http://forum.xda-developers.com/showthread.php?t=611787
with : Leo_RADIO_2.15.50.14**: MultiUpload
after this i do ? i need to doul boot? soo the fouom have a doul boot guid?
from what i understod i need to first install WM 7.5 soo is there a good guid to install it? and after i do it do i jast install the android or do i need to do somesing?
now thet i told you what i want to install can you help me and send me to the reight links and to tell me what i do first you know step by step
like : 1.*link* you do this with radio 7. bla bla
2. *link* you do this dwonload bla bla
thanks alot!!!!! doron
and if you recomend difrent rom pliz say and will my 8 GB can take the android + MW7.5?
Click to expand...
Click to collapse
You really should download the HD2 NAND Toolkit. You can use the toolkit to flash HSPL, MAGLDR, or clk to your HD2. It has all of these included in the download for the Toolkit. You can also use it to flash an .nbh file to your HD2. This means you can flash Splashscreens and Windows Mobile ROMs with the Toolkit also.
Go to this thread to learn how to dual boot Windows Phone 7.5 and Android. But just so you know Android can only be run from SD card when you have WP 7.5 installed in NAND. You can not however dual boot Android from NAND and WP 7.5from SD card as WP uses your SD card as internal memory.
Last of all for your on good please read the guide in my signature so you can hopefully educate yourself about exactly what the MAGLDR is and what it's function is. Plus it is a load more of info I think would very much help you to read.
thank you very mach i jast seee i need to put the android in SD card will it make it sloer? or its will upload in self to RAM on start up... if its like this maybe i will start with jast android 4.0.4 soo jast for this what do i need?
and in the future i will doul boot whan i buy a 16 GB SD card
and can i use this : http://forum.xda-developers.com/showthread.php?t=1136644
jast for the start untel i read all about RADIO and HL things cause u relly wanna start useing the phone...
i wanna use it on : http://forum.xda-developers.com/showthread.php?t=1492488
doron050 said:
thank you very mach i jast seee i need to put the android in SD card will it make it sloer? or its will upload in self to RAM on start up... if its like this maybe i will start with jast android 4.0.4 soo jast for this what do i need?
and in the future i will doul boot whan i buy a 16 GB SD card
and can i use this : http://forum.xda-developers.com/showthread.php?t=1136644
jast for the start untel i read all about RADIO and HL things cause u relly wanna start useing the phone...
i wanna use it on : http://forum.xda-developers.com/showthread.php?t=1492488
Click to expand...
Click to collapse
The first thread you linked is a tool used to install Android to NAND widget means Android boots from internal memory. So unless you want to just use Android on your HD2 this is not the guide for you right now.
The second thread you linked is to a SD card buildvthat uses Super RAM which means that part of the main Android system boots into RAM on start up widget makes the build run faster. If this is what you want to use for your Android you just need to download it and extract the contents of the .zip file to the root of your SD card and then either use the file explorer to touch on CLRCAD and then HARET, or you can install a dual boot app for Windows Mobile that you can use to boot your Android from SD card.
I just want to correct a very very wrong statement, WP7.5 is very well supported. The HD2 is often better supported by the dev community than official WP devices, infact the HD2 got Tango before any other WP phone. Also with WP7.5 on NAND you can dual boot so you can have Android and WP7.5, you can't do that the other way around. I would suggest dual booting HD2Owners ROM found HERE along with AmericanAndroid on the SD found HERE. These two are both realy stable and well supported.
ok now i got very very conpused...
ok know the phone better then me soo i will take your seggestion but now lets make order
soo i want :
02.04.12 HD2O© http://forum.xda-developers.com/showthread.php?t=953078
AmeriCanAndroid AOSP HD2 http://forum.xda-developers.com/showthread.php?t=957652
ok see first of all i need to take care of my RADIO and SPL and istall WM7.5 soo:
http://forum.xda-developers.com/showthread.php?t=971478&highlight=install+Windows+Phone+HTC+HD2
and then :
http://forum.xda-developers.com/showthread.php?t=913815
*this looks very hard... but very hard lots of steps...
and i dont have a android install guid....
doron050 said:
ok now i got very very conpused...
ok know the phone better then me soo i will take your seggestion but now lets make order
soo i want :
02.04.12 HD2O© http://forum.xda-developers.com/showthread.php?t=953078
AmeriCanAndroid AOSP HD2 http://forum.xda-developers.com/showthread.php?t=957652
ok see first of all i need to take care of my RADIO and SPL and istall WM7.5 soo:
http://forum.xda-developers.com/showthread.php?t=971478&highlight=install+Windows+Phone+HTC+HD2
and then :
http://forum.xda-developers.com/showthread.php?t=913815
*this looks very hard... but very hard lots of steps...
and i dont have a android install guid....
Click to expand...
Click to collapse
Ok let me see if I can walk you through this some. First download the 02.04.12 HD2O© ROM, the AmeriCanAndroid AOSP HD2 SD card build, the Leo_RADIO_2.15.50.14, the EASEUS ALL-IN-ONE Partition Manager Software mentioned in the guide I linked, and if you do not already have it download the HD2 NAND Toolkit. You will also need to download and install Active Sync or Windows Mobile Device Center (these programs have the USB drivers you will need) depending on what version of Windows you have, you will just have to google for a download as I do not know what version of windows you have, I suggest you put both the WP7 ROM, the Android SD card build, and the 2.15.50.14 Radio in a folder that you can easily remember were they are on your computer. Also go ahead and install both the HD2 Toolkit and the partitioning software on your computer.
Now to make sure you do not have any problems with your SD card I recommend you do a full re-format of your SD card. You will need a USB card reader and a Micro SD card adapter.I linked them just so you will have a visual reference of what you need, but those are the ones I have and they work great. Aslo if your computer has a card reader you like mine does you just need a Micro SD card adapter. Now back to re-formatting your SD card.
Place your SD card in the Micro SD card adapter, then place the Micro SD card adapter in the USB card reader (or the USB card reader on your computer), and then plug the USB card reader into one of the USB ports on your computer. Let your computer install the drivers and go to the windows start menu and click on Computer or My computer depending on which version of Windows you are using. You should see the SD card as a removable drive. Right click the drive and select copy and then create a folder to paste the data that is on the SD card already so you will have a backup. Now right click on the drive again and select format, when the format window pops up make sure to uncheck the the box beside Quick Format and also make sure it says FAT32 under File System. Click Start and then click Ok on the warning window that pops up. Then set back and relax until the card is done being formatted.
Now you need to make sure you have at least 50% or more battery, but I suggest you have a full charge before you start just to be safe. Once you have the proper battery level you need to boot your HD2 into the bootloader by holding the volume down button down while you power on your HD2. When you see the multicolor boot connect it via USB and wait until you see the Serial in the white bar of the bootloader change to USB. Now open the folder with the 2.15.50.14 Radio in it and extract the files from the .rar file, you will need Win RAR to do this. Once you have the files extracted click on the CustomRUU.exe file and follow all of the on screen instructions. Once the RUU is done you will have the 2.15.50.14 Radio installed on your HD2.
Next you need to boot your HD2 back into the bootloader and connect it to your computer via USB again. Open the HD2NAND Toolkit and click on the Install HSPL button under Main Tools. Follow the on screen instructions and when it is done you will have HSPL 2.08 installed on your HD2. Now go back to the HD2 NAND Toolkit and click on the Insatall MAGLDR button under Main Tools. Follow the on screen instructions and when it is done you will have MAGLDR 1.13 installed on your HD2.
Now that you have MAGLDR installed on your HD2 it should only boot up to the MAGLDR 1.13 main menu. Go to option number 5 USB Flasher and then find the HD2O ROM file you downloaded and extract the files drom it. Once the files are extracted click on the DWI.exe and follow the on screen commands. When it is done you will have Windows Phone 7 on your HD2.
Now you need to follow the part of the guide you linked that I have quoted below. I left the link to the video of the method that I have quoted so watch it as it is a very good video. Oh and in case you do not notice it in the video, you need to hold down the power button while your HD2 is booting to boot to the MAGLDR main menu. And the video will show you how to get the Android build to boot on your HD2.
darrengladysz said:
THIRD METHOD - USING A SINGLE SD CARD - HERE IS ANOTHER ALTERNATE METHOD PROPOSED BY XDA MEMBER HYELLOW (UPDATED)
1. Put your sd card inside the hd2 and power on.
2. Go to about screen, in settings, and reset your device. Let it reset and boot to WP7 again. While booting to WP7, it'll create the partitions it needs, so this is important. After you have gone through the setup wizard, go to about screen and reset your device again.
3. When it has booted into magldr screen, remove the sd card and insert into pc. (make sure that magldr is shown and stays there at bootup, otherwise it'll boot straight into wp7 without sd card and that is not what we want.
4. You'll see two partitions. A whopping 200mb of fat16 partition and the other is unformatted. Now right click on the unformatted partition and click delete. After that, click apply. Now you have unallocated space. Right click on the unallocated space and select create. Set parameters to logical and unformatted and size the partition. This will be your WP7 partition, so decide how much you want to allocate to it, this is permanent, no changes afterwards can be made. Also, make sure you move it to the end of the sd card in the same 'create' window. Hit apply. IMPORTANT When using this method make sure that the wp7 "unformatted partition" is larger than the Android partition otherwise the wp7 "unformatted partition" will move in 2nd place and you will not be able to resize the fat 16 / android partition.
5. Sit back and take a break.
break.
6. You now have a green fat16 partition to the left, some unallocated grey portion in the middle and your WP7 partition in modern turqoise colour on the far right. Agreed? Now remove the sd card from PC and insert in HD2.
7. After you have inserted the sd card, let it boot into WP7. Remember what your last action was when you were still in WP7? Yes, you pressed reset, so the device actually thinks he is still resetting the device. He might do it too, but just go through the setup wizard again.
8. Go to about screen and verify your storage. Don't look strange if when the storage has a different of about 1Gb, this is swallowed by WP7 for system stuff etc. Are you happy with the progress so far? Then power down your device and remove the sd card. Allow the HD2 to fully powered down as sometimes the screen is pitch black, but the device is still turning off.
9. Insert the sd card in pc and, using EASUS right click on the green fat 16 partition and select resize/move. Now fill up the rest of the unallocated space and hit apply. This is your android partition.
10. Format the sd android partition (not the whole sd card!) using EASUS to FAT32 using 32 or 64 kb cluster size and put an android build onto it and test.
11. IMPORTANT You need to convert the wp7 unformatted partition to primary for the sd android to see the sd card Use minitool partition wizard to do this. Right click on your WP7 unformatted partition and select modify and then click on set as primary and hit apply. Here is the link for minitool: http://forum.xda-developers.com/showpost.php?p=10887494&postcount=372
VIDEO INSTRUCTIONS
Here is another video by Geolo for persons with only 1 card and 1 card reader. Here is the link: http://www.youtube.com/watch?v=N-cUdB4_5f4
Click to expand...
Click to collapse
Hope this is detailed enough for you.
T-Macgnolia did a great job with the walk-through the only thing I would suggest is that you can save yourself a LOT of headache if after you get the HD20 ROM installed use CAB Sender and send one of the partition updates from xboxmod to your phone. This will let you skip all the hard partitioning stuff. The CAB's with various partition sizes can be found HERE. After you send the CAB you will have to go to 'Settings' -> 'about' -> 'reset your phone' -> 'yes' -> 'yes'
From that point on you can finish with installing Android onto the SD card.
ok soo first of all thank you very very very mach enry one! the phone will arrive (i ordered it from ebay) in a week in the meen time i downloaded all the file i need and im reading about RADIO and HSPL and seeing a video in youtube
now i didnt understend the secend post i got a 8GB SD card soo what i do with the program is chosing 8GB after i got WM7.5 install and it is insted of:
Now you need to follow the part of the guide you linked that I have quoted below. I left the link to the video of the method that I have quoted so watch it as it is a very good video. Oh and in case you do not notice it in the video, you need to hold down the power button while your HD2 is booting to boot to the MAGLDR main menu. And the video will show you how to get the Android build to boot on your HD2.
Originally Posted by darrengladysz
THIRD METHOD - USING A SINGLE SD CARD - HERE IS ANOTHER ALTERNATE METHOD PROPOSED BY XDA MEMBER HYELLOW (UPDATED)
1. Put your sd card inside the hd2 and power on.
2. Go to about screen, in settings, and reset your device. Let it reset and boot to WP7 again. While booting to WP7, it'll create the partitions it needs, so this is important. After you have gone through the setup wizard, go to about screen and reset your device again.
3. When it has booted into magldr screen, remove the sd card and insert into pc. (make sure that magldr is shown and stays there at bootup, otherwise it'll boot straight into wp7 without sd card and that is not what we want.
4. You'll see two partitions. A whopping 200mb of fat16 partition and the other is unformatted. Now right click on the unformatted partition and click delete. After that, click apply. Now you have unallocated space. Right click on the unallocated space and select create. Set parameters to logical and unformatted and size the partition. This will be your WP7 partition, so decide how much you want to allocate to it, this is permanent, no changes afterwards can be made. Also, make sure you move it to the end of the sd card in the same 'create' window. Hit apply. IMPORTANT When using this method make sure that the wp7 "unformatted partition" is larger than the Android partition otherwise the wp7 "unformatted partition" will move in 2nd place and you will not be able to resize the fat 16 / android partition.
5. Sit back and take a break.
break.
6. You now have a green fat16 partition to the left, some unallocated grey portion in the middle and your WP7 partition in modern turqoise colour on the far right. Agreed? Now remove the sd card from PC and insert in HD2.
7. After you have inserted the sd card, let it boot into WP7. Remember what your last action was when you were still in WP7? Yes, you pressed reset, so the device actually thinks he is still resetting the device. He might do it too, but just go through the setup wizard again.
8. Go to about screen and verify your storage. Don't look strange if when the storage has a different of about 1Gb, this is swallowed by WP7 for system stuff etc. Are you happy with the progress so far? Then power down your device and remove the sd card. Allow the HD2 to fully powered down as sometimes the screen is pitch black, but the device is still turning off.
9. Insert the sd card in pc and, using EASUS right click on the green fat 16 partition and select resize/move. Now fill up the rest of the unallocated space and hit apply. This is your android partition.
10. Format the sd android partition (not the whole sd card!) using EASUS to FAT32 using 32 or 64 kb cluster size and put an android build onto it and test.
11. IMPORTANT You need to convert the wp7 unformatted partition to primary for the sd android to see the sd card Use minitool partition wizard to do this. Right click on your WP7 unformatted partition and select modify and then click on set as primary and hit apply. Here is the link for minitool: http://forum.xda-developers.com/show...&postcount=372
VIDEO INSTRUCTIONS
Here is another video by Geolo for persons with only 1 card and 1 card reader. Here is the link: http://www.youtube.com/watch?v=N-cUdB4_5f4
after the program i do part 11? or 10? or i jast install android? what is this program do? make room for the anndroid right?
doron050 said:
ok soo first of all thank you very very very mach enry one! the phone will arrive (i ordered it from ebay) in a week in the meen time i downloaded all the file i need and im reading about RADIO and HSPL and seeing a video in youtube
now i didnt understend the secend post i got a 8GB SD card soo what i do with the program is chosing 8GB after i got WM7.5 install and it is insted of:
Now you need to follow the part of the guide you linked that I have quoted below. I left the link to the video of the method that I have quoted so watch it as it is a very good video. Oh and in case you do not notice it in the video, you need to hold down the power button while your HD2 is booting to boot to the MAGLDR main menu. And the video will show you how to get the Android build to boot on your HD2.
Click to expand...
Click to collapse
Well to be very honest to you I have only flashed four WP7 ROMs to my HD2. So my knowledge of the ends and outs of WP7 on the HD2 is somewhat limited. I do remember reading something about Cab Sender. I think you have your HD2 booted into the WP7 ROM and your HD2 connected via USB to your computer to I se the Cab Sender to transfer cab files to your HD2 and install them also. Maybe XDA Seior Member voluptuary can spread some more light on it for you. But if I remember correctly if what voluptuary is telling to do takes out Step 1 to 11 of the guide I qouted and everything in the video up to here he puts te Android build on the SD card as I think it will. Then I say it sounds like you may want to check it out I am willing to bet it is not complicated to figure out.
Now just on a side note, I do still say it would be a very good idea to still do it te other way even if you try the Cab Sender. It is always a very good idea of how to manually do things. This way you understand a little bit better what you are doing to your device. And remember knowledge is power.
doron050 said:
THIRD METHOD - USING A SINGLE SD CARD - HERE IS ANOTHER ALTERNATE METHOD PROPOSED BY XDA MEMBER HYELLOW (UPDATED)
1. Put your sd card inside the hd2 and power on.
2. Go to about screen, in settings, and reset your device. Let it reset and boot to WP7 again. While booting to WP7, it'll create the partitions it needs, so this is important. After you have gone through the setup wizard, go to about screen and reset your device again.
3. When it has booted into magldr screen, remove the sd card and insert into pc. (make sure that magldr is shown and stays there at bootup, otherwise it'll boot straight into wp7 without sd card and that is not what we want.
4. You'll see two partitions. A whopping 200mb of fat16 partition and the other is unformatted. Now right click on the unformatted partition and click delete. After that, click apply. Now you have unallocated space. Right click on the unallocated space and select create. Set parameters to logical and unformatted and size the partition. This will be your WP7 partition, so decide how much you want to allocate to it, this is permanent, no changes afterwards can be made. Also, make sure you move it to the end of the sd card in the same 'create' window. Hit apply. IMPORTANT When using this method make sure that the wp7 "unformatted partition" is larger than the Android partition otherwise the wp7 "unformatted partition" will move in 2nd place and you will not be able to resize the fat 16 / android partition.
5. Sit back and take a break.
break.
6. You now have a green fat16 partition to the left, some unallocated grey portion in the middle and your WP7 partition in modern turqoise colour on the far right. Agreed? Now remove the sd card from PC and insert in HD2.
7. After you have inserted the sd card, let it boot into WP7. Remember what your last action was when you were still in WP7? Yes, you pressed reset, so the device actually thinks he is still resetting the device. He might do it too, but just go through the setup wizard again.
8. Go to about screen and verify your storage. Don't look strange if when the storage has a different of about 1Gb, this is swallowed by WP7 for system stuff etc. Are you happy with the progress so far? Then power down your device and remove the sd card. Allow the HD2 to fully powered down as sometimes the screen is pitch black, but the device is still turning off.
9. Insert the sd card in pc and, using EASUS right click on the green fat 16 partition and select resize/move. Now fill up the rest of the unallocated space and hit apply. This is your android partition.
10. Format the sd android partition (not the whole sd card!) using EASUS to FAT32 using 32 or 64 kb cluster size and put an android build onto it and test.
11. IMPORTANT You need to convert the wp7 unformatted partition to primary for the sd android to see the sd card Use minitool partition wizard to do this. Right click on your WP7 unformatted partition and select modify and then click on set as primary and hit apply. Here is the link for minitool: http://forum.xda-developers.com/show...&postcount=372
Click to expand...
Click to collapse
^-- This whole part you don't need to do.
after the program i do part 11? or 10? or i jast install android? what is this program do? make room for the anndroid right?
Click to expand...
Click to collapse
All you would have to do is after you install the HD20 WP7 ROM send one of the partition CAB's I linked to earlier, so say you want a 2GB partition for Android you would send "DEV_EXTRAPART_2G.cab" with CAB Sender and then do a full reset from within WP7. Then let WP7 reboot and you should be all set to power down the phone take the SD card out and copy the 'Android' folder over to the SD card that you would have taken out of the ZIP from the AmericanAndroid thread. You have to be sure to follow the few instuctions in the AmericanAndroid ZIP readme to get it to boot via MAGLDR.
Then to point MAGLDR to the right place to boot Android you need to, while powering the phone on with the loaded up SD card, press and hold the power button to get into the MAGLDR menu then go to '10. Services' -> '1. BootSettings' -> '3. AD SD Dir' and then select the 'Android' folder you just copied over to your SD card.
all is great!!! one lest Question how do i do a windows live acc ?
the phone will arreive in a faw days...
doron050 said:
all is great!!! one lest Question how do i do a windows live acc ?
the phone will arreive in a faw days...
Click to expand...
Click to collapse
Well to get a Windows live account you just have to go to live.com and creat a account or just creat one when you go through the set up when you first boot WP7.
But I think what you are asking is how to get live services working. To do this you will have to contact Microsoft. Check out this thread for more details on it. I got my code over live chat on m computer, I told them it was a HTC HD7.
Or you can use skype and call 1-800-642-7676
its microsft Us support number and its toll free so you can call it on skype for free (from anywehre in world) say you have a technical problem and its user related.
then it will connect you to an operator
he/she will ask for your problem, just say u have a HTC HD7 phone and it wants a 25 digit activation code from u.
Then he/she will ask for your phone number, ur operator, ur email, and your name (don't worry they r not gonna spy on u, they just want it for registration, believe me I know ;-P )
then u have to be on hold for 5-10 mins and he/she will read u the activation code
BUT: if you have a poor connection or bad English language skills then the chat method is far better
PS: my opinion as an ORD? it doesn't worth the hassle. I remember after lots of hours spending online and finding the best rom and the best way to change to WP7 and finally activating it... I couldn't make it through the first day on WP7 (even thou I had SD android, the wake up bug really bugged me). then I just flashed to an ICS rom and then it was happily ever after
ok thanks evrey one soo i see a lot of ppl say thet WM7.5 is not thet good...
but i have 2 more qestion:
ace4cia i saw ICS on HD2 in youtube and i saw it is slow not moving fast do you have thet problam ?
and what rom do you advise?
and whan voluptuary says DEV_EXTRAPART_2G.cab its for the sastem only? if i install apps i can do it only on the 2 G or the all SD card
doron050 said:
i saw ICS on HD2 in youtube and i saw it is slow not moving fast do you have thet problam ?
and what rom do you advise?
Click to expand...
Click to collapse
nope, not at all, well it's not like a quadcore phone but it is pretty well for ours, still far better than wp7 though ↖(^▽^)↗
and for the rom if ur looking for beauty and performance together the ics miui.us by smokin is awesome, but if ur looking for stock looks of ics and ofc performance then nexushd or aokp are cool too ㄟ(≧◇≦)ㄏ
Sent from my HTC HD2 using XDA
Hi I was wondering if anyone can guide me through dual booting the latest WP 7.8 build and Android JellyBean v.1.2. I love both but can't seem to dual boot both. It's either one or the other.Thanks in advance.
try to read this thread
or this
http://forum.xda-developers.com/showthread.php?t=1356833
Iojjj said:
try to read this thread
Click to expand...
Click to collapse
But that forum doesn't say what to do once you install WP7. Like how to install android JB to dual boot both. I want to dual boot the latest builds for both.
Emm... It says you must do reset of you phone from settings (or hard reset from magldr). Then you should don't let your phone boots (just stay in magldr). Remove your card from phone and put it to PC's card reader. Use MiniTool Partition Wizard to create more partitions (fat32 and ext4). And there you go. Try to boot WP7. If it boots normaly just install Android as NativeSD.
You will be lost any of your data on SD.
I think those tutorial is clearly enough. Hope you can repeat all of this steps.
Jcamacho228 said:
But that forum doesn't say what to do once you install WP7. Like how to install android JB to dual boot both. I want to dual boot the latest builds for both.
Click to expand...
Click to collapse
look my video for dualboot on one SDcard in Pdaimatejam topic (i posted link already)
dxdy said:
look my video for dualboot on one SDcard in Pdaimatejam topic (i posted link already)
Click to expand...
Click to collapse
I too, am finding the various tutorials a bit confusing. I used MAGLDR V1.13 and successfully installed Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5. My goal is to e able to dual boot the installed WP7 and MIUI_JB_2.9.14_NATIVESD. THIS tutorial, was followed to partition sdcard, but I'm still confused when it comes to installing the SDNATIVE Android ROM.
Do I install cwm?
I probably should state that my volume down button in not working by the way.
bibbin said:
Do I install cwm?
Click to expand...
Click to collapse
There is a sentence from those tutorial:
copy the "TOUCH" or "TWRP" or "RECOVERY" folder your SD Card (they all do the same thing)
you should copy recovery folder to sd card.
Jcamacho228 said:
I probably should state that my volume down button in not working by the way.
Click to expand...
Click to collapse
You can do hardreset from WP settings anyway. And magldr has looping menu, I think.
Iojjj said:
There is a sentence from those tutorial:
copy the "TOUCH" or "TWRP" or "RECOVERY" folder your SD Card (they all do the same thing)
you should copy recovery folder to sd card.
Click to expand...
Click to collapse
...and then what?
Maybe you should read more carefully?
Code:
Magldr > Service > Boot Setting > AD SD Dir > TOUCH
& this should run, Tap on Advance
[IMG]http://api.photoshop.com/v1.0/accounts/4ae359774e764cf4ad5fa83d4fca8aa7/assets/398b2592363a4bb698eb746c9fd87413/renditions/1024.jpg[/IMG]
Tap on Partition SD card
[IMG]http://api.photoshop.com/v1.0/accounts/4ae359774e764cf4ad5fa83d4fca8aa7/assets/a1c0832d1e2943b4b61945eabd258d42/renditions/1024.jpg[/IMG]
Ext size. = press the + sign to go up, swap size is 0 & make sure to select EXT4 then tap Partition
[IMG]http://api.photoshop.com/v1.0/accounts/4ae359774e764cf4ad5fa83d4fca8aa7/assets/2a19905a08f94abd822641a8811c82a2/renditions/1024.jpg[/IMG]
All of this is jus REPLACEMENT of recovery. Then :
Code:
Magldr > Service > Boot Setting > AD SD Dir > TOUCH
Tap Install, notice that the compatible ROMS for this methoid have a div2 or NativeSD designation, tap on the ROM you want to flash.
[IMG]http://api.photoshop.com/v1.0/accounts/4ae359774e764cf4ad5fa83d4fca8aa7/assets/15aaf0bf080a4921bf7f45913059f6b1/renditions/1024.jpg[/IMG]
Iojjj said:
Maybe you should read more carefully?
Click to expand...
Click to collapse
lojjj, I too have attempted to follow that series of tutorials, and finally succeeded, but due specifically to the part you are mentioning, it took me HOURS. There is no "Touch", "Recovery" or "Tap" folder on a freshly partitioned SD card with 4extRecovery on it. The instructions are absolutely extraneous and cause confusion. Moreover, instructions for using HD2Toolkit to partition the card are useless for triple booting if one has already partitioned using a card reader in your computer. Yes, it can be done, but doesn't need to be done if one has followed the instructions up to that point.
The other problem is that one needs to combine three or more tutorials just to do this, and they sometimes have different options, but no reason given for choosing those options. This may be the best tutorial out there, pictures and everything, but still a far cry from being perfect or complete. Oh, and sometimes the tutorials are continued in another post, which also leads to confusion.
SK
Sword King said:
There is no "Touch", "Recovery" or "Tap" folder on a freshly partitioned SD card with 4extRecovery on it.
Click to expand...
Click to collapse
You're looking for this ones? The link provides at the top of first post. There are a lot of recoveries with NativeSD support. You need to download one of them, unpack and copy to root of SD Card. And then you can get to Magldr > Service > Boot Setting > AD SD Dir > Recovery.
Maybe I'm wrong cause I never did such things. Good luck :fingers-crossed: