is the model number just renamed, or are there any differences? when floods of roms and development support comes out for i9505, will it be exclusively for i9505 or for I337 as well?
Sent from my GT-I9300 using xda app-developers app
soraxd said:
is the model number just renamed, or are there any differences? when floods of roms and development support comes out for i9505, will it be exclusively for i9505 or for I337 as well?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes. Just as with the SGS3 each US provider had a different phine version number. Some SMALL things would need to be changed between each providers version like the modem. But the firmware is easily ported between different providers firmwares. Just look at the SGS3's ATT/ROGERS/Bell/Telus forum. Then there are ports from other US providers in there as well. So it SHOULD be the same and probably EXPANDED since the UK and other areas will have a version based on the qualcomm processor. So MANY MANY possibilities.
Sent from my SAMSUNG-SGH-I747 using xda premium
It just doesn't have US LTE for AT&T so you get only HSDPA+ coverage.
RaptorMD said:
It just doesn't have US LTE for AT&T so you get only HSDPA+ coverage.
Click to expand...
Click to collapse
I believe this to be wrong. The i9505 from UK should be the same exactly harwdare wise as the ATT model 1337 which IS a i9505 and should use the SAME bands. It has always been that way. Now in all the past variations of the ATT(SGS2 SGS1) and UK (I9000 I9100) versions the modem was different if course. And had to make a change in the kernel.
NOW if your talking about the gt-i9500 then that is ONLY a 3G device and ALSO uses the same frequency bands as ATT for the 3G (huspa+).
Sent from my SAMSUNG-SGH-I747 using xda premium
I thought i9505 would cover all LTE bands. Why is ATT needing a different variant?
Sent from my GT-I9100 using xda premium
MaKTaiL said:
I thought i9505 would cover all LTE bands. Why is ATT needing a different variant?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Because the ATT version has physical branding (on back) and reworked software. It keeps people from confusing it with other versions. All US carriers do the same.
Sent from my HTC One X
MaKTaiL said:
I thought i9505 would cover all LTE bands. Why is ATT needing a different variant?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
aren't there like 20 bands of LTE? not sure if LTE works differently than HSPA but till now the best phones only boasted quadband.. a jump from quad-band to vigint-band seems crazy lol
Sent from my GT-I9300 using xda app-developers app
RockRatt said:
I believe this to be wrong. The i9505 from UK should be the same exactly harwdare wise as the ATT model 1337 which IS a i9505 and should use the SAME bands. It has always been that way. Now in all the past variations of the ATT(SGS2 SGS1) and UK (I9000 I9100) versions the modem was different if course. And had to make a change in the kernel.
NOW if your talking about the gt-i9500 then that is ONLY a 3G device and ALSO uses the same frequency bands as ATT for the 3G (huspa+).
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
you are wrong i3 att is different than t mobile or sprint or Verizon.. tgw modem from one will brick other carriers phone.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
lgkahn said:
you are wrong i3 att is different than t mobile or sprint or Verizon.. tgw modem from one will brick other carriers phone.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Re-read what I wrote and you quoted. I said the MODEMS are different between each providers versions and HAD TO BE REPLACED. The hardware of the ATT "SHOULD BE" the same as the Interntional UK version of the i9505.
ATT has always used the same frequency bands as the UK and much of the rest of the GSM networks world wide. TMob uses a different band and always has for data. The CDMA versions have always been a completely different beast from the ATT/INTERNATIONAL versions BECAUSE the latter use GSM(WCDMA I BELIEVE) networks and NOT CDMA like verizon and sprint.
"I am NOT saying" that you can interchange the modems from ANY of the providers. In fact when the SGS2 ATT version i777 came out I could IN FACT put the INTERNATIONAL SGS2 I9100 firmware in my phone and it would work without bricking it. Without changing anything out. But calls would not work correctly as talked about below...
BUT if you look at my ATT Modem thread http://forum.xda-developers.com/showthread.php?t=1336958 you will see that I tried the modems from the i9100 onto the i777 and could make calls but the other person on the line could NOT hear me. This is where the OTHER change comes to play and has to be mic swapped, the mic has to be swapped to use the international versions firmware on the i777 to fix the mics being swapped differently between the two devices. The ATT version I777 used the exyrnos processor as did the i9100 international SGS2. The ONLY REAL difference between the internation i9100 and i777 ATT was the ATT version had different mic locations and did NOT have the fm tuner. Other than that they were almost the exact same.
So back to the original question from the OP, I believe the i9505 International Version and the ATT I337 (A I9505 VARIANT) will be close or the same hardware wise and roms should be VERY EASILY interchangeable as was/is the case between the i9100/i777 versions. Of course the cdma versions will be totally different due to DIFFERENT hardware needed for CDMA. And TMob different due to 1 different radio frequency needed for data
Sent from my SAMSUNG-SGH-I747 using xda premium
Any one tried to odin I9505 rom to an I337
Has Anyone tried to odin the I9505 rom to an I337 or does anyone know someone who did? I would think if it worked it would unlock the I337 bootloader.
edit.. quite unofficial but using pdadb.net the LTE bands for the 2 are different
I337 : LTE700 (B17), LTE1700/2100 (B4)
I9505: LTE2100 (B1), LTE850 (B5), LTE1800 (B3), LTE2600 (B7), LTE900 (B8), LTE800 (B20)
so maybe you could Odin flash I9505 then Odin just the modem from the I337 if it's available.
Also based on RockRatt's post does anyone know if the mic's or anything else is actually different?
My s4 says under "About Device" that its model number is I337. However, doing an IMEI lookup, it says i9505. So I would assume no difference aside from the LTE bands, and some really small fine tuning under the hood..
After reading this thread, I am a little disappointed. I bought an international S4 i9505 with the intention of using it in USA. And now I am reading that the LTE bands on the i9505 and ATT version are different which means I cant use the i9505 in the US without a mod which is not guaranteed 100% ?
Has anyone tried flashing the i9505 with ATT modem with success?
jesa said:
Has Anyone tried to odin the I9505 rom to an I337 or does anyone know someone who did? I would think if it worked it would unlock the I337 bootloader.
edit.. quite unofficial but using pdadb.net the LTE bands for the 2 are different
I337 : LTE700 (B17), LTE1700/2100 (B4)
I9505: LTE2100 (B1), LTE850 (B5), LTE1800 (B3), LTE2600 (B7), LTE900 (B8), LTE800 (B20)
so maybe you could Odin flash I9505 then Odin just the modem from the I337 if it's available.
Also based on RockRatt's post does anyone know if the mic's or anything else is actually different?
Click to expand...
Click to collapse
You can't ODIN a I9505 rom on the I337 because it's bootloader is locked and only files with samsung's encryption key for the I337 will flash via ODIN. The bootloader is locked so we can't flash anything via ODIN except official AT&T firmware, and if you have the latest MF3 full update you can't flash anything other than MF3, you can't flash back to mdl or mdb after upgrading.
No way to truly unlock the bootloader at this point, Loki is just a work-around.
Because of the very different LTE bands in the Europe and the US, I think their are likely some hardware changes between the I9505 and the i337, even if it's only related to LTE chips.
The compatibility of AT&T and UK phones was true with GSM and HSPA, but now with LTE bands they are diverging, so what applies to the old S1 and S2 doesn't necessarily apply anymore.
I think it's unlikely that you'll get LTE working in the US on a I9505, might want to sell it and get a T-mobile version, that will work with AT&T LTE and the bootloader is unlocked
I'm a S4 newbie. Has anyone used the I9505 on AT&T network and if so, what are the issues? I'd like to find a phone that supports TWRP and I know the I337 doesn't
It supports SafeStrap, but that's a different issue. Anyway, the I9505 will not get LTE on any US carrier due to the device not having the US LTE frequencies. The I9505 otherwise functions as expected on AT&T. HSPA is slow compared to LTE, but not a deal breaker.
[QRCODE][/QRCODE]
Strephon Alkhalikoi said:
It supports SafeStrap, but that's a different issue. Anyway, the I9505 will not get LTE on any US carrier due to the device not having the US LTE frequencies. The I9505 otherwise functions as expected on AT&T. HSPA is slow compared to LTE, but not a deal breaker.
Click to expand...
Click to collapse
Thanks. When you reference SafeStrap I assume you are referring to the I337. I've already installed SafeStrap which is OK as an interim solution, but I'd rather install TWRP as my recovery software. Do you know of any S4 variants that have a) unlocked bootloader and b) are compatible with AT&T? According to this site: http://www.phonemore.com/compare/phones/ the I9505G supports the same LTE frequencies as the I337/?
Your two options are the I9505G - good luck in finding it - and the T-Mobile M919. In the case of the T-Mobile device you have to carrier unlock it to use it on AT&T.
Strephon Alkhalikoi said:
Your two options are the I9505G - good luck in finding it - and the T-Mobile M919. In the case of the T-Mobile device you have to carrier unlock it to use it on AT&T.
Click to expand...
Click to collapse
Thanks. Great info. According to this reference the M919 supports only one of the three LTE frequencies of the I337. Is that true and if so, is it significant?
http://www.phonemore.com/compare/ph...vs-samsung-galaxy-s4-sgh-i337-att-32gb/340721
Also, according to the same site, the I9505G supports all three, but as you say it's tough to find one at reasonable price. Thanks again.
That site is full of crap. The M919 supports the same exact frequencies as the I337.
Strephon Alkhalikoi said:
That site is full of crap. The M919 supports the same exact frequencies as the I337.
Click to expand...
Click to collapse
Thanks again. I appreciate the feedback. For my future reference can you refer me to a site that has accurate information?
Related
Just curious what kind of speed (download and upload) are people getting on AT&T using the N7100?
Screen capture of the speed test would be very appreciated.
Thanks!!
I'm in southern California
Scary!
Ngambek2003 said:
Just curious what kind of speed (download and upload) are people getting on AT&T using the N7100?
Screen capture of the speed test would be very appreciated.
Thanks!!
Click to expand...
Click to collapse
seems like you have AT&T, you might want to just want the 5 days for the LTE version
Scythe024 said:
seems like you have AT&T, you might want to just want the 5 days for the LTE version
Click to expand...
Click to collapse
This right here is the only reason I'm interested in the AT&T Note 2.
Scythe024 said:
seems like you have AT&T, you might want to just want the 5 days for the LTE version
Click to expand...
Click to collapse
So far there's no sign of the white version for ATT. And updates seem to be much slower getting to ATT phones. I have the ATT Galaxy S3 and no Jelly Bean yet. That's why I'm considering the international version instead. Plus there's a good deal on newegg now for 589.
Ngambek2003 said:
So far there's no sign of the white version for ATT. And updates seem to be much slower getting to ATT phones. I have the ATT Galaxy S3 and no Jelly Bean yet. That's why I'm considering the international version instead. Plus there's a good deal on newegg now for 589.
Click to expand...
Click to collapse
You should read through the link in my post above you...
Jade Eyed Wolf said:
You should read through the link in my post above you...
Click to expand...
Click to collapse
so you CAN run a international rom then just flash a at&t modem?
Anybody else with speed test results?
Thanks!!
Scythe024 said:
so you CAN run a international rom then just flash a at&t modem?
Click to expand...
Click to collapse
I'm not sure yet. That's why I started that other thread. It's my theory and hope that you can flash international firmware onto (some) of the domestic North American Note 2's (including Canadian versions).
Just as an example, and I think I may have briefly touch on this in the other thread, take a look at the original Galaxy Tab (7 inch).
The international version of that device, available everywhere else around the world, was able to function as a phone out of the box.
The domestic carrier versions of the same device did not offer phone functionality at all, and were basically locked down, pay-as-you-go only, data-only, worthless (but expensive) pieces of crap! Unfortunately, if you had a CDMA version (Sprint, Verizon, US Cellular, etc.), you were totally out of luck, because the chipsets were different (or at least the modem firmware), and not compatible with the international firmware. However, the GSM US models were an exception, especially the AT&T version, and here's why:
With the very slight exception of the T-Mobile version (which used a custom UMTS modem for its own 1700mhz AWS band), the North American GSM Galaxy Tab's had -exactly- the same hardware, transistor for transistor. As such, if you bought an AT&T branded Tab (as I did), and you didn't like your carrier dictating to you what features you could or couldn't have on your device (which I didn't), you could give them a big fat middle finger by simply flashing the international firmware in all its unlocked feature-full glory.
With the T-Mobile version, it was slightly different due to the custom modem. If you simply flashed the international firmware and just left it at that, phone functionality would work fine, but you wouldn't have 3G functionality (because the international firmware didn't support 1700mhz AWS), so you'd be stuck on EDGE. However, if you wanted 3G, all you had to do was use Mobile Odin to flash the T-Mobile specific modem.bin, and off you went (minus working phone functionality). You had to flip flop between two modems, depending on your needs, but it was an OK workaround.
So anyway, this all gets me back to the Note 2 of today. As I mention in the other thread, seeing as how the North American Note 2's are almost identical to their international counterparts, with the major exceptions being the radio hardware and modem firmware, shouldn't it then be possible to get international firmware working on a domestic version?
The first step would be to see if you could even flash international firmware onto a domestic Note 2 and get the thing to even boot up.
Assuming that's possible, and say you have limited cellular functionality (if any at all!), with perhaps only WiFi working or something, then the next step would be to extract the modem.bin from the carrier-specific firmware, and then flash that over the international firmware.
Hopefully, theoretically, that should get you up and running!
*bump*. Anyone else care to share their results?
Thanks
San Francisco:
Simi Valley, CA.
Sent from my GT-N7100 using xda premium
Here are mine.
i wont go with the at&t version, becacuse as soon as my contract end early next year im switching to straight talk. i dont want to stuck on another contract again.
Sent from my GT-N7100 using Tapatalk 2
another test i did just now, since all my other tests are early morning.
Sent from my GT-N7100 using Tapatalk 2
What APN settings are you all using for your N7100 on AT&T?
+1 ^^^
Dallas, TX area
Sent from my GT-N7100 using Tapatalk 2
Sorry moderators, put this in the wrong section last time! Feel free to delete previous post!
I spend 50% of my time in the US and 50% of my time in Canada and have a contract with both AT&T and with Rogers.
I am going to buy the S4 soon. Should I get the SGH-I337 variant with AT&T or the SGH-I337m variant with Rogers?
In about 14 months, I will be back in Canada (on Rogers) permanently. So far, I am leaning towards the AT&T variant due to greater rom availability, but I am worried about whether the S4 will work on Rogers 3G bands and LTE network.
The reason I am worried is that I am currently using an unlocked Sprint BB Tour 9630 Quadband on Rogers with specs:
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 2100
CDMA/EVDO Rev A 800/1900
And the Roger's EDGE network barely functions on that phone (many disconnects).
I am a little unfamiliar with network bands, but can you let me know if the phone's 3G radio and LTE radio are identical across Rogers and AT&T?
I read somewhere that Rogers S4 uses 2600 MHz LTE Band and AT&T uses 700 MHz LTE. Is this true? Or does this phone have both LTE bands built in?
Thank you!
After a quick search, I believe both phones should have identical network capabilities.
So you should be able to get LTE and 4G access on either of the networks using either of the phone variants.
The 'M' after the model number is definitely a Canadian carrier thing and it makes no difference. I have a Galaxy S2 from Virgin/Bell which was sold in Canada as GT-i9100M but it was identical to the international GT-i9100. So much so, that I was able to flash the ROM for the international GT-i9100 on my phone without any modifications or complications.
Hope it helps! Or a more senior member can chime in and correct me!
i would recommend going with the rogers i337m. the only reason that there is more roms for at&t version is that there is a stronger demand for them. but any roms meant for i337 will also work on i337m.
Buddyjohn said:
i would recommend going with the rogers i337m. the only reason that there is more roms for at&t version is that there is a stronger demand for them. but any roms meant for i337 will also work on i337m.
Click to expand...
Click to collapse
Why would you choose the Rogers version?
if you were thinking about getting the s4 soon i would go with att variant like you said because of the rom availability, but if you were going to wait, let say a few weeks to a month i would just get the i337m because samsung will probably push another update to ruin djrbliss work to unlock the bootloader. just keep checking back to see if any update gets pushed through and youll be good
vRoman Godv said:
if you were thinking about getting the s4 soon i would go with att variant like you said because of the rom availability, but if you were going to wait, let say a few weeks to a month i would just get the i337m because samsung will probably push another update to ruin djrbliss work to unlock the bootloader. just keep checking back to see if any update gets pushed through and youll be good
Click to expand...
Click to collapse
Ah, the Rogers bootloader is unlocked, but AT&T is locked, correct?
golden_35 said:
Why would you choose the Rogers version?
Click to expand...
Click to collapse
Unlocked boot loader.
Sent from my SGH-I337M using xda app-developers app
Hmmmmm. Thank you all! I may just end up getting the 32gb model from AT&T, since I know the AT&T model has the same radio bands built in for 3G and LTE. I'll just hope for an unlocked bootloader!
golden_35 said:
Hmmmmm. Thank you all! I may just end up getting the 32gb model from AT&T, since I know the AT&T model has the same radio bands built in for 3G and LTE. I'll just hope for an unlocked bootloader!
Click to expand...
Click to collapse
AT&T has a locked bootloader, but you can get it in 32GB. However there are works underway to get around the locks.
Rogers has an unlocked bootloader but only comes in 16GB. Unfortunately there are no ways that I know of to get around the lack of internal space and JB does not let you install apps on external SDcards.
Perfect. I'm going to trade my Blackberry Q10 for the AT&T S4 32gb.
Thanks!
Hello everyone,
I am really confused about different versions of Galaxy S4 and their compatibility with Wind mobile in Canada.
As far as I know, there are i9500, i9505 and i377 variants.
I was looking forward to buy the i9505 model but I'm not sure if it is compatible with Wind mobile network. (Right now I am outside of Canada for a while so getting a phone in a duty free shop makes sense.)
Does anyone know if i377 or any other variants of Galaxy S4 is compatible with Wind mobile?
If it matters, right now I have a T999V (galaxy S3) which works fine with Wind's network.
Thanks in advance
SirM2X said:
Hello everyone,
I am really confused about different versions of Galaxy S4 and their compatibility with Wind mobile in Canada.
As far as I know, there are i9500, i9505 and i377 variants.
I was looking forward to buy the i9505 model but I'm not sure if it is compatible with Wind mobile network. (Right now I am outside of Canada for a while so getting a phone in a duty free shop makes sense.)
Does anyone know if i377 or any other variants of Galaxy S4 is compatible with Wind mobile?
If it matters, right now I have a T999V (galaxy S3) which works fine with Wind's network.
Thanks in advance
Click to expand...
Click to collapse
The GT-i9500 uses the exynos octa core cpu and isn't available in North America because it doesn't support LTE here.
The GT-i9505 is the international S4 that uses the qualcomm quadcore cpu which is marketed in the USA as i377 (at&t) and i377m (bell/rogers/telus) in Canada. These 2 variants don't support AWS bands out of the box, but users have shown a way to enable that on these phones.
There is also another variant of the i9505 marketed as SGH-M919 for T-Mobile in USA and SGH-M919V for Wind/Videotron in Canada. These support AWS bands out of the box and work perfectly well on all North American providers such as At&t, Rogers, Bell, Virgin Mobile, T-Mobile, etc.
Hope this helps your dilemma!
dj_aj said:
The GT-i9500 uses the exynos octa core cpu and isn't available in North America because it doesn't support LTE here.
The GT-i9505 is the international S4 that uses the qualcomm quadcore cpu which is marketed in the USA as i377 (at&t) and i377m (bell/rogers/telus) in Canada. These 2 variants don't support AWS bands out of the box, but users have shown a way to enable that on these phones.
There is also another variant of the i9505 marketed as SGH-M919 for T-Mobile in USA and SGH-M919V for Wind/Videotron in Canada. These support AWS bands out of the box and work perfectly well on all North American providers such as At&t, Rogers, Bell, Virgin Mobile, T-Mobile, etc.
Hope this helps your dilemma!
Click to expand...
Click to collapse
Thank you for your elaboration.
In other words, if I went and bought an SGS 4 with model number i9505, it wouldn't work on -say- Wind mobile out of the box? Should I strictly go for M919? Or are they all the same i9505 hardware only different radios? This "radio": are we referring to the baseband firmware or the actual circuitry inside the phone itself?
Sorry for asking again but I'm trying to clear up the confusion.
Thank you very much in advance
SirM2X said:
Thank you for your elaboration.
In other words, if I went and bought an SGS 4 with model number i9505, it wouldn't work on -say- Wind mobile out of the box? Should I strictly go for M919? Or are they all the same i9505 hardware only different radios? This "radio": are we referring to the baseband firmware or the actual circuitry inside the phone itself?
Sorry for asking again but I'm trying to clear up the confusion.
Thank you very much in advance
Click to expand...
Click to collapse
1) All GT-i9505 variants have the same hardware which includes the radio chip, cpu, ram etc.
2) The software part (modem) that controls the radio module is different in the variants which is why some of the users were able to 'activate' AWS band support on the At&t/Rogers/Bell S4 by flashing the appropriate modem/rom.
3) I believe if you purchase the GT-i9505 it will still work on Wind Mobile and the other carriers. But keep in mind that you may or may not be able to connect to LTE or lose reception in some areas where they only run the network on a respective band.
This is where you have to do your homework. Go to Wind Mobile's website and see what bands they use & then cross reference them with the GT-i9505 supported bands.
After you do that yourself and are fairly confident that the phone should work. I'd suggest that you call up Wind mobile and ask them to ensure if that model will work on Wind completely. Just a heads up, you may not get the most knowledgeable tech on your first try...so you may have to try again.
If you just really want that model from the duty free, just get it! I'm sure one of the more advanced users here will be able to point out what needs to be tweaked for it run flawlessly on whatever network.
dj_aj said:
1) All GT-i9505 variants have the same hardware which includes the radio chip, cpu, ram etc.
2) The software part (modem) that controls the radio module is different in the variants which is why some of the users were able to 'activate' AWS band support on the At&t/Rogers/Bell S4 by flashing the appropriate modem/rom.
3) I believe if you purchase the GT-i9505 it will still work on Wind Mobile and the other carriers. But keep in mind that you may or may not be able to connect to LTE or lose reception in some areas where they only run the network on a respective band.
This is where you have to do your homework. Go to Wind Mobile's website and see what bands they use & then cross reference them with the GT-i9505 supported bands.
After you do that yourself and are fairly confident that the phone should work. I'd suggest that you call up Wind mobile and ask them to ensure if that model will work on Wind completely. Just a heads up, you may not get the most knowledgeable tech on your first try...so you may have to try again.
If you just really want that model from the duty free, just get it! I'm sure one of the more advanced users here will be able to point out what needs to be tweaked for it run flawlessly on whatever network.
Click to expand...
Click to collapse
Thank you
Now that clears everything up
bought the GT i9500
I bought the GT i9500 galaxy s4 when I was on vacation outside Canada.
Now I'm back here and cannot connect to wind network.. It always goes on roaming :crying:
Please someone let me know what to do with my phone. Can I sell it to someone using Rogers/Bell/Telus? as my friend has a rogers sim card and its working on my phone
Also would be thankful if someone could tell me what could I do to make wind work on my phone.
I had the simcard cut by the phoneseller when I bought it so I could use it when I come back here. Could that be the problem? I mean, would it work if I bought a new small sim card from Wind?
No it won't work.I
I got a phone UK from 3 network and it didn't work and after lots of research I found that it is missing the AWS mode. Mine also works with Rogers, Telus and Bell but not Wind mobile. The store just cut my cimcar for $5 and did not work.
I was reading that there is a ROM or firmware that should be updated.
good luck and let me know if you fixed it.
Samsung Galaxy S4 on Wind Mobile
Were you able to get this working on WIND Mobile? I am in the same predicament, and need to get this working but it just keeps roaming. Wonder if there is a ROM that can be flashed to support the AWS frequency for WIND.
unhappy_with_s4 said:
I bought the GT i9500 galaxy s4 when I was on vacation outside Canada.
Now I'm back here and cannot connect to wind network.. It always goes on roaming :crying:
Please someone let me know what to do with my phone. Can I sell it to someone using Rogers/Bell/Telus? as my friend has a rogers sim card and its working on my phone
Also would be thankful if someone could tell me what could I do to make wind work on my phone.
I had the simcard cut by the phoneseller when I bought it so I could use it when I come back here. Could that be the problem? I mean, would it work if I bought a new small sim card from Wind?
Click to expand...
Click to collapse
Activate AWS on i9505
Check out this link to learn how to activate AWS
http://forum.xda-developers.com/showthread.php?t=2291589
Hello,
Has anyone actually tried an N9005 on ATT LTE or Rogers LTE?
Lot's of speculation and indeed online the specs say it should not work. Hopefully there is an ATT or Rogers modem to flash soon.
Thanks,
Kevin
@Class said:
Hello,
Has anyone actually tried an N9005 on ATT LTE or Rogers LTE?
Lot's of speculation and indeed online the specs say it should not work. Hopefully there is an ATT or Rogers modem to flash soon.
Thanks,
Kevin
Click to expand...
Click to collapse
What speculation? It is missing the required bands to work on AT&T.
The hardware has support for it - so its a software restriction. But you're right it has been confirmed that the N9005 stock doesn't work on AT&T / Verizon.
Note II received AWS bands by a modified QCP file. Some people say its just a modem flash.
Yeah I'm wondering the same thing my unlocked n9005 works on Rogers lte but I was hoping there was a modem I could flash since coverage isn't great and I heard it's because of software reasons
Sent from my SM-N9005 using Tapatalk
I am using an n9005 and it works on LTE just fine. Maybe the coverage area is good where I normally use it.
The n9005 will work on Rogers LTE where there is some 2600mhz coverage.
Sent from my SM-N900 with Tapatalk
@Class said:
Note II received AWS bands by a modified QCP file. Some people say its just a modem flash.
Click to expand...
Click to collapse
Would lovee if someone would share if it could be done.
PatienceWithin said:
Would lovee if someone would share if it could be done.
Click to expand...
Click to collapse
Yeah would be a dream come true if it could be achieved on the Note 3. I wonder what's so different from Note 2 to Note 3 that it can't be done the same way?
sc2ascend said:
Yeah would be a dream come true if it could be achieved on the Note 3. I wonder what's so different from Note 2 to Note 3 that it can't be done the same way?
Click to expand...
Click to collapse
I'm waiting for something to happen on this front as well... I've had my n9005 for about 2 months on at&t and have been settling for hspa+ but it's *really* slow. if anybody has any ideas as to how to get LTE working on the n9005 i'd really like to hear about it.
cpgeek said:
I'm waiting for something to happen on this front as well... I've had my n9005 for about 2 months on at&t and have been settling for hspa+ but it's *really* slow. if anybody has any ideas as to how to get LTE working on the n9005 i'd really like to hear about it.
Click to expand...
Click to collapse
+1
I've attempted to flash the modems from N900W8 firmwares without success.
Still looking for a way to enable 4G LTE with Telus on the n9005.
Expliciate said:
+1
I've attempted to flash the modems from N900W8 firmwares without success.
Still looking for a way to enable 4G LTE with Telus on the n9005.
Click to expand...
Click to collapse
You would at least need the AWS band on your device to start thinking that enabling LTE for Telus is feasible...
Your device does not even have this band on 3G...
Sent from my SM-N900 with Tapatalk
cpgeek said:
I'm waiting for something to happen on this front as well... I've had my n9005 for about 2 months on at&t and have been settling for hspa+ but it's *really* slow. if anybody has any ideas as to how to get LTE working on the n9005 i'd really like to hear about it.
Click to expand...
Click to collapse
zadigre said:
You would at least need the AWS band on your device to start thinking that enabling LTE for Telus is feasible...
Your device does not even have this band on 3G...
Sent from my SM-N900 with Tapatalk
Click to expand...
Click to collapse
Both the n9005 and n900w8 have the same hardware. It's just primarily based on software at this point.
Expliciate said:
Both the n9005 and n900w8 have the same hardware. It's just primarily based on software at this point.
Click to expand...
Click to collapse
Same cpu / chipset does not necessarily mean same power amplifiers or same antennas
Sent from my SM-N900 with Tapatalk
zadigre said:
Same cpu / chipset does not necessarily mean same power amplifiers or same antennas
Sent from my SM-N900 with Tapatalk
Click to expand...
Click to collapse
Ah okay, gotchaa.
Finally got some LTE action in TX
Hello, I have an sm-n9005 on AT&T (go phone). Been living with HSPA since getting this phone in early April. I'm on vacation in Texas visiting relatives and on the way from Dallas to Houston I actually got 4G in two locations briefly while driving. Oddly, both of these locations were not in Houston or Dallas where one would expect them to be, rather in smaller towns. I don't care what anyone here says about modems, firmwares, etc. They HAVE the capability to serve LTE to these phones but won't. The bottom line is deregulation is killing the consumer while these clowns pretend each one has "the best" or "the most reliable" LTE service.
Hey guys,
so I live in Canada and the note 3 model available here is the n900w8 which is approximately 700 plus tax. But I can get the N900t unlocked for $650 tax included.
I tried to Google if both phones work on the same frequencies and as far as I can tell, both phones have the exact same specs.
My question is will the N900t work on all the Canadian networks like the n900w8 or will there be compatibility issues? which model should I get?
Sent from my LG-P999 using xda app-developers app
That I can tell there is a difference in the LTE bands between the 2 models so if you want to run rogers you need the n900w8. If using wind looks like the t mobile will work but wind does not have lte. If you want to be able to hop back and forth between different Canadian carriers better off with the n900w8 it would seem, I am looking at exactly the same situation by the way.
flash515 said:
That I can tell there is a difference in the LTE bands between the 2 models so if you want to run rogers you need the n900w8. If using wind looks like the t mobile will work but wind does not have lte. If you want to be able to hop back and forth between different Canadian carriers better off with the n900w8 it would seem, I am looking at exactly the same situation by the way.
Click to expand...
Click to collapse
Thanks for the reply, I already went ahead and bought the T-Mobile one, I doubt I'll be switching to Rogers or bell as their prices are ridiculous, I was struck in a contract with those guys for years and will never go back.
Sent from my SM-N900T using xda app-developers app
Doing some more research the n9008w may require different radios if you changing from wind to rogers etc and also looks like the 900t from t mobile can be made to work with either wind, rogers, etc but again will need to root, add different radios etc. Currently I use Fido with a note 1 ATT and Rodgers is throttling the network as last year I could get 40mb on LTE now down to 10MB, it seems Wind will give 20mb on 3g and Rodgers or Fido wont gaurentee anything better so it doesnt matter if its on 3g or LTE its still going to likely be 20mb speed anyway. Most sites cannot give you faster downloads anyway so paying more is pointless, it only benefits the service provider.
Telus LTE
knotes said:
Thanks for the reply, I already went ahead and bought the T-Mobile one, I doubt I'll be switching to Rogers or bell as their prices are ridiculous, I was struck in a contract with those guys for years and will never go back.
Click to expand...
Click to collapse
Yea LTE is the only difference.
I have the N900W8 from Telus and it works with Wind and mobilicity
but only on 4G
Of course when i insert a rogers telus bell or other carrier sim i can still retain my LTE cuz that is what my model is.
I have an old legacy with TELUS but I still pay 72 after tax. I still keep unlimited this and that and 6GB data.
This new 2 YEAR plan thing is a load of bs.