Is it possible, to be connected to a WiFi with your android device, and share it yourself while being connected to it? Because i can only share ADHOC over my laptop, which i can only connect to with my rooted android, and my new android phone cant connect to it... help please.
WolfpackEra said:
Is it possible, to be connected to a WiFi with your android device, and share it yourself while being connected to it? Because i can only share ADHOC over my laptop, which i can only connect to with my rooted android, and my new android phone cant connect to it... help please.
Click to expand...
Click to collapse
What exactly are you trying to do? Using something like "Wifi teather for root users" you should be able to set up your phone as a wifi router. Clients (your PC) would get internet access via wifi and your phones cell network connection.
dswansonsb said:
What exactly are you trying to do? Using something like "Wifi teather for root users" you should be able to set up your phone as a wifi router. Clients (your PC) would get internet access via wifi and your phones cell network connection.
Click to expand...
Click to collapse
Yep, so tethering will share your mobile internet connection (GPRS, 3G, ...) with other WiFi-capable devices like your notebook. And when tethering is on, you can't connect with your mobile phone to a WiFi network because the WiFi chip can only operate in "client" or tethering mode (as long as I know).
Anyone else think that wifi tether uses way for data than it should?
Related
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
MoridinBG said:
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
Click to expand...
Click to collapse
I believe that it CAN detect ad-hoc networks.
I setup an ad-hoc connection from my pc, and it detected it, but there was no network activity. I probably did something wrong, but, I am not sure why it didn't work.
MoridinBG said:
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
Click to expand...
Click to collapse
I use USB Wi-fi adapter for wireless connection and I need to say that G1 don't allow to use adhoc connection, it need only wifi router.
Some month before I see the answer from T-Mobile support that G1 can't use adhoc connection.
It's sad, bcoz my last WM phone (Tytn) has no problems with adhoc connection...
Alas I feel your pain. I use adhoc for my iPhone frequently because at school I can only jack into an ethernet because the WiFi is protected. But my G1 can't so I am doomed to EDGE when i'm in my mom's classroom after school
MoridinBG said:
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
Click to expand...
Click to collapse
is this a software issue that can be fixed or is it a hardware issue?
Software. In fact the phone can MAKE ad-hoc networks that other devices and computers can see and join. That's how WiFi tethering works. You can start a wifi tethering app and use the ad hoc connection it creates, without using the cellular tethering at all, or you can examine the tethering scripts and extract just the part concerning the wifi.
I experimented a bit, and was able to change almost everything needed to share Internet from the PC to the phone, except default gateway on the phone...
Noone wants to help
I guess everyone who has an unlimited data plan thinks "Haha stupid stone age idiots want adhoc HAHAHA" . Damn it. I live in a stupid country and I don't have an unlimited data plan. I want to connect to my laptop's wi fi. Please anyone help!!!
Here's the solution
http://hydtech.wordpress.com/2009/09/14/how-to-connect-to-ad-hoc-networks-using-tmobile-g1-android/
The important part is to tweak the windows part - you need to tell the broadband/adsl internet connection to share itself to the Private wireless network (the network manging your Wireless adapter). If you are having trouble with the windows part (say you connect and have full bars on the phone but no access to web) google ICS (internet connection sharing) in windows and you should get it working.
I just got a Tattoo.. I think new users have always problem.
Somebody help me for the following:
1. I want to access internet at home on my laptop running Windows 7 by TETHERING with my Tattoo GPRS(EDGE). Is that USB connection and selecting 'Mobile Network Sharing'?? But I am still not able to success.
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
thacen said:
I just got a Tattoo.. I think new users have always problem.
Somebody help me for the following:
1. I want to access internet at home on my laptop running Windows 7 by TETHERING with my Tattoo GPRS(EDGE). Is that USB connection and selecting 'Mobile Network Sharing'?? But I am still not able to success.
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
Click to expand...
Click to collapse
Thank you everybody. I resolve my 1st problem. Yes, it is just USB connection and selecting 'Mobile Network Sharing'. My problem was because of not able to install the NDIS driver properly. After resolving the driver problem it is working fine.
But I am still looking for my 2nd problem RETHETING
thacen said:
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
Click to expand...
Click to collapse
I'm not sure if it will work that way... I know with a Windows Mobile device you can, but never tried under Android. Perhaps there is an option somewhere in the HTC Sync program?
There definitely isn't an option in HTC Sync to do this. In fact, I don't know of any way of generically sharing your internet connection over USB. If your work PC has a Wi-Fi card, you could easily share the internet connection over an ad-hoc network.
Edit: In principle, you could also share your internet connection over Bluetooth but I'm pretty sure the Tattoo doesn't support the necessary Bluetooth profile(s) for such connections.
check out this gadget http://usb.brando.com/prod_detail.php?prod_id=00805
Ali 24789 said:
There definitely isn't an option in HTC Sync to do this. In fact, I don't know of any way of generically sharing your internet connection over USB. If your work PC has a Wi-Fi card, you could easily share the internet connection over an ad-hoc network.
Edit: In principle, you could also share your internet connection over Bluetooth but I'm pretty sure the Tattoo doesn't support the necessary Bluetooth profile(s) for such connections.
Click to expand...
Click to collapse
I think Wi-fi ad-hoc connection is for rooted androids only and I don't found any rooted tattoo till date. I tried another option, using Connectify on my Windows 7 laptop and sharing Wi-fi. But still unable to success browsing, eventhough my phone can be connected with my Laptop through this connectify.
Anybody have success browsing it kindly share.
thacen said:
I think Wi-fi ad-hoc connection is for rooted androids only
Click to expand...
Click to collapse
Uh, what? I'm sharing my internet connection over Wi-Fi with my MacBook right now and my Tattoo can connect to it and access the internet just fine.
Edit: You're probably thinking of android-wifi-tether, which lets you share your phone's 3G/2G mobile connection via Wi-Fi or Bluetooth.
Edit2:
MiSSigNNo said:
check out this gadget http://usb.brando.com/prod_detail.php?prod_id=00805
Click to expand...
Click to collapse
That gadget won't help. How is a phone supposed to make use of it?
Ali 24789 said:
Uh, what? I'm sharing my internet connection over Wi-Fi with my MacBook right now and my Tattoo can connect to it and access the internet just fine.
Edit: You're probably thinking of android-wifi-tether, which lets you share your phone's 3G/2G mobile connection via Wi-Fi or Bluetooth.
Edit2:
That gadget won't help. How is a phone supposed to make use of it?
Click to expand...
Click to collapse
If you are talking about tethering, it is OK, I am just satisfied with USB tethering, it is working now, but What I am actually looking for is about RETHETING just converse connection of that tethering. (I know there is no word like RETHETING BUT I don't know what is the right term of just converse connection of tethering.) The problem is, I want to share wired Internet at my working place with my HTC tattoo phone as I have limited GPRS subscription to save some money and to enjoy speed of that wired internet.
I thought running Connectify on my Windows 7 laptop connected to that wired Internet as a Wi-fi hotspot then connected by this android phone (Tattoo) is the right solution.
Yes, it is connected pinging is ok but could not access internet from my Tattoo. May be some firewall problem or something I cannot figure out. If some one have solution it is most welcome.
thacen said:
If you are talking about tethering, it is OK
Click to expand...
Click to collapse
No, I was talking about "retheting"; my MacBook has a wired (ethernet) connection to the internet and is sharing it over Wi-Fi, which my Tattoo can connect to and use.
I did some reading up on Connectify (and was surprised to find that Micro$oft still hasn't quite implemented the feature natively on Windows yet) and it should work. I don't have a Wi-Fi card on my desktop PC so I can't test it myself but perhaps you are having something like a firewall problem.
Ali 24789 said:
No, I was talking about "retheting"; my MacBook has a wired (ethernet) connection to the internet and is sharing it over Wi-Fi, which my Tattoo can connect to and use.
I did some reading up on Connectify (and was surprised to find that Micro$oft still hasn't quite implemented the feature natively on Windows yet) and it should work. I don't have a Wi-Fi card on my desktop PC so I can't test it myself but perhaps you are having something like a firewall problem.
Click to expand...
Click to collapse
I have tried with Connectify and also Virtual Router on my Windows 7 but could not success. I think you are lucky to own a macbook. My Windows 7 is RC so it might be because of that or Tattoo may lack something.
Regarding that android-wifi-tether, it reports as rootted device required and could not help my requirement.
I thought you were talking about an usb internet sharing connections...
If you want to do it via wifi, is pretty easy, since ALL windows have the ad-hoc functionality made by default. Problem is that if you use it with your wifi chipset then you won't be able to conect directly to other wifis if it is your main connect unless you buy another wifi card for this purpose...
in windows 7 you can find this functionality under the connection center... in windows xp is a little bit difficult because you have to configure the adapter into the wifi adapter properties in network connections tabs.
MiSSigNNo said:
I thought you were talking about an usb internet sharing connections...
Click to expand...
Click to collapse
Yes. I actually want that USB internet sharing. But till date no one is seem to success it.. So, while waiting for this solution.. I am just looking for alternative, that sharing through wifi.
If you want to do it via wifi, is pretty easy, since ALL windows have the ad-hoc functionality made by default. Problem is that if you use it with your wifi chipset then you won't be able to conect directly to other wifis if it is your main connect unless you buy another wifi card for this purpose...
in windows 7 you can find this functionality under the connection center... in windows xp is a little bit difficult because you have to configure the adapter into the wifi adapter properties in network connections tabs.
Click to expand...
Click to collapse
I also thought that it should be very easy, and tried all possible means that I know but could not success. One funny thing is, I can get IP address resolved of any URL on my tattoo after wifi connection. It means it can reach DNS server and can resolve IP address but still could not able to browsing. May be some firewall or Antivirus is blocking the browsing on my Windows 7 pc I need to check thoroughly.
If someone have good explanation, it will be very helpful... thanks.
Wifi is working
I was making my laptop complicated by setting 3 static IP networks..as my work place has 3 gateways and I manually change gw when required. I clean it up and set to only one. Now Internet through Wifi of Laptop is OK I am using Connectify on Windows7.
Thx for the patience.
But still waiting for solution on USB "Retheting"
Hi,
I'm hoping someone can help me. I'm extremely new to all this.
I am trying to set up my MyTouch to be a wifi hotspot for my rooted Nook Color. From what I've been reading and experiencing in my efforts to get it to work, is that the NC doesn't recognize ad hoc wireless connections.
Is there any way around this?
Thanks for the help!
Jes
Sounds like you need to look for an android-wifi-tether application.
This program enables tethering (via wifi and bluetooth) for "rooted" handsets running android (such as the Android DevPhone 1). Clients (your laptop for example) can connect via wifi (ad-hoc mode) or bluetooth and get access to the internet using the 3G, 2G mobile connection or (in case you are using bluetooth) the wifi connection which is established by the handset.
http://code.google.com/p/android-wifi-tether/wiki/FAQ
yguns76 said:
Sounds like you need to look for an android-wifi-tether application.
This program enables tethering (via wifi and bluetooth) for "rooted" handsets running android (such as the Android DevPhone 1). Clients (your laptop for example) can connect via wifi (ad-hoc mode) or bluetooth and get access to the internet using the 3G, 2G mobile connection or (in case you are using bluetooth) the wifi connection which is established by the handset.
http://code.google.com/p/android-wifi-tether/wiki/FAQ
Click to expand...
Click to collapse
Not what he's looking for. He's looking for an app that will broadcast an actual network, not just an ad-hoc connection, which that app does.
Ive got a question. I want to connect to a VPN at my university, TunModul etc everything is right. But i need a WiFi connection, so when i want to connect to the Wifi Network, it shows "setting up connection" then "disconncted". So can i just get a WIfi Signal without having connected to the WLAN network? So if you want a connection but you cant use it. I know that this is working for Motorolla, Devices, running android 2.3, so i this just a feature of Android 2.3?
Hi, New poster so if I've posted in the wrong area please don't bite
I've been connecting my phone to a smart device (miracast-ing 'direct') but as of late the connection has become unstable and generally unusable. I had the brainstorm of using an old router to stabilize the connection, this seems to have done the trick but now I'm unable to access the mobile data as WIFI has assumed priority. Please bear in mind I don't have home internet so the router is being used solely as a go between for phone and smart device. Is there any possibility of WiFi connection whilst have access to mobile data or is this just a pipedream?
Thanks in advance
You can just start a wifi network from your phone, connect the smart devices to your phones wifi and use mobile data normal as internet connection (this is standard if you start a wifi network from phone). You wouldnt even need the router with this szenario, if the wifi signal of your phone isnt strong enough you can connect your router to the phone and extend the wifi with the router.
saturday_night said:
You can just start a wifi network from your phone, connect the smart devices to your phones wifi and use mobile data normal as internet connection (this is standard if you start a wifi network from phone). You wouldnt even need the router with this szenario, if the wifi signal of your phone isnt strong enough you can connect your router to the phone and extend the wifi with the router.
Click to expand...
Click to collapse
Thanks for the reply
But creating a mobile hotspot won't help because it doesn't solve the faulty (actually non-existent) miracast connection, plus I don't need a hotspot because only the phone needs internet access. My earlier explanation was probably a bit vague.
My goal is to mirror my phone's screen but to also have internet access solely on my phone.
Phone➡Smart Device➡Display - Can't connect (used to work faultless).
Phone➡Router➡Smart Device➡Display - Connects but no mobile data available because the phone thinks the router has internet access covered.
Dowtish said:
Thanks for the reply
But creating a mobile hotspot won't help because it doesn't solve the faulty (actually non-existent) miracast connection, plus I don't need a hotspot because only the phone needs internet access. My earlier explanation was probably a bit vague.
My goal is to mirror my phone's screen but to also have internet access solely on my phone.
Phone➡Smart Device➡Display - Can't connect (used to work faultless).
Phone➡Router➡Smart Device➡Display - Connects but no mobile data available because the phone thinks the router has internet access covered.
Click to expand...
Click to collapse
Creating a hotspot is not for giving the other devices in your network internet access, this is the only way you can use the wifi on your phone with using mobile data at the same time. I dont know why but android devices never use mobile data when they are connected to a wifi network and there is no internet access available. So if you configure your router as a wifi repeater and setup the phone as base station, your wifi signal from phone to router should be good and you can connect your other devices to the router, the phone should see all devices in the same network if you stop the dhcp server in your router and only use the one from your phones hotspot. Should look like this :
Phone (with DHCP) <----Router---->Smart Device---> Display
saturday_night said:
Creating a hotspot is not for giving the other devices in your network internet access, this is the only way you can use the wifi on your phone with using mobile data at the same time. I dont know why but android devices never use mobile data when they are connected to a wifi network and there is no internet access available. So if you configure your router as a wifi repeater and setup the phone as base station, your wifi signal from phone to router should be good and you can connect your other devices to the router, the phone should see all devices in the same network if you stop the dhcp server in your router and only use the one from your phones hotspot. Should look like this :
Phone (with DHCP) <----Router---->Smart Device---> Display
Click to expand...
Click to collapse
Cheers will try it out.
Hopefully that sort of config is available on my router as it is loaded with a custom firmware from my old ISP provider.
Thanks
saturday_night said:
Creating a hotspot is not for giving the other devices in your network internet access, this is the only way you can use the wifi on your phone with using mobile data at the same time. I dont know why but android devices never use mobile data when they are connected to a wifi network and there is no internet access available. So if you configure your router as a wifi repeater and setup the phone as base station, your wifi signal from phone to router should be good and you can connect your other devices to the router, the phone should see all devices in the same network if you stop the dhcp server in your router and only use the one from your phones hotspot. Should look like this :
Phone (with DHCP) <----Router---->Smart Device---> Display
Click to expand...
Click to collapse
Router ISP custom firmware seems restrictive (no advanced wireless settings) plus WDS is not officially supported.
Possibly achievable but beyond my technical savvy
Thanks for the advice anyways.
Dowtish said:
Hi, New poster so if I've posted in the wrong area please don't bite
I've been connecting my phone to a smart device (miracast-ing 'direct') but as of late the connection has become unstable and generally unusable. I had the brainstorm of using an old router to stabilize the connection, this seems to have done the trick but now I'm unable to access the mobile data as WIFI has assumed priority. Please bear in mind I don't have home internet so the router is being used solely as a go between for phone and smart device. Is there any possibility of WiFi connection whilst have access to mobile data or is this just a pipedream?
Thanks in advance
Click to expand...
Click to collapse
Do not use WiFi 5Gz , use only 2,4Gz, and wifi 5Gz off for router and smartphone