Database Users

Help with my Iconia A501!

I have installed the ICS V4 bootloader and everything is fine. (it has the big PASS thing). I can boot up to HC 3.2.1 fine as well.
However, when I go to press power+volume down, I get "booting from recovery kernal image" then it switches to a picture of the android with a caution sign.
Do I have to root my device and install CWM or something? (sorry I'm still quite noob at this, I haven't rooted yet). Didn't I already install this when I installed the bootloader?
Thanks in advance!

Booting stock HC and stock ICS after installation of ICS BL overwrites recovery.
Follow civatos guide for installing ICS BL V4:
http://forum.xda-developers.com/showthread.php?t=1622425
And do all the steps.
Greetings
edit: on Moscow's advice ;-)

HalloSpencer said:
Booting stock HC after installation of ICS BL overwrites recovery.
Follow civatos guide for installing ICS BL V4:
http://forum.xda-developers.com/showthread.php?t=1622425
And do all the steps.
Greetings
Click to expand...
Click to collapse
This includes Stock ICS Roms also

Thanks guys. I immediately booted to recovery after installing the bootloader. Now I have ICS running.
If I wanted to update to the V5 bootloader, could I do it without reinstalling my rom?
You guys are awesome

jgv115 said:
Thanks guys. I immediately booted to recovery after installing the bootloader. Now I have ICS running.
If I wanted to update to the V5 bootloader, could I do it without reinstalling my rom?
You guys are awesome
Click to expand...
Click to collapse
If I'm not mistaken, I believe you can put the v5 bootloader.blob in a flash.zip and flash through CWM. That's one method. This became available as of ver4.
The other would be to run the NVFlash again you used previously, and install only the bootloader (apx?). Your CWM and Rom should remain intact.
I use Blackthund3r's flash exe to install my .bin files. (gives some funny windows error but always completes) I just toss the new bootloader.bin in the same folder as the exe app. Also the latest recovery image. Do them both at the same time.
So basically 3 methods. Also, check your new UID number and make sure you convert it to SBK like you did the last time. ICS usually changes the UID number sometimes. I usually keep all UID's and SBK's written down.

Moscow Desire said:
If I'm not mistaken, I believe you can put the v5 bootloader.blob in a flash.zip and flash through CWM. That's one method. This became available as of ver4.
The other would be to run the NVFlash again you used previously, and install only the bootloader (apx?). Your CWM and Rom should remain intact.
I use Blackthund3r's flash exe to install my .bin files. (gives some funny windows error but always completes) I just toss the new bootloader.bin in the same folder as the exe app. Also the latest recovery image. Do them both at the same time.
So basically 3 methods. Also, check your new UID number and make sure you convert it to SBK like you did the last time. ICS usually changes the UID number sometimes. I usually keep all UID's and SBK's written down.
Click to expand...
Click to collapse
Can you pm me that windows error please? I think it's to do with my mode detection code being stopped abruptly but I want to have it fixed properly for v0.3.3
Sent from my Iconia A500 using Tapatalk 2

[Q] Using afterOTA to update bootloader and nothing changed?

I read and re-read the development thread for AfterOTA and I found nothing on this problem. I will outlay the steps I took. I downloaded AfterOTA lite v1.7 and connected my tab to it and saved the txt file. (I can list the full output if needed) the Bootloader was as follows:
bootloader: 0.03.0X-HC
Android Build: FLEXREAPER RF1_rv1_Acer_AV041_A500_1.031_033_041.00_CUS_WW_GEN1
I booted into Recovery and found the version number.
My custom recovery: ClockworkMod Recovery v5.0.0.0(thor2002ro rev1.3.4)
I bought this from a friend and didn't do all the modding myself which I am new to the Iconia a500 (but not new to Rooting, Romming, Recovering) so I am a little in the dark on where to go from here.
I downloaded AfterOTA 1.7 (the Full version) and clicked on the "standard" tab and chose the install "bootloader ICS v 3.14.7 + recovery thor v1.7.3" and clicked the "for 50x"
It shut the tablet down said booting into APX, did the whole thing and at the end it said "complete, you can power down your tablet with the power button and boot back up"
I powered it down it booted up fine but when I reconnected it to afterOTA it dosent read the CPuid (it just says "0") and the bootloader space is blank.
Everything works, I can use it as I normally would but I want to install the new flexreaper and thought I might as well update the Bootloader and recovery to get up to current on everything. Thank you for any help you can give me in understanding what happened and what I may have done wrong. BTW I did disable all antivirus and UAC and rebooted before running AfterOTA.

You're probably ok. You just need to flash a "real" ICS rom like Flexreaper Extreme I would guess.
When you boot your tab, you should see some text in the left corner like "Skirlax_CZ's bootloader version xxxxxx" If you do, then bootloader is probably ok. Boot into your recovery and check your recovery version.
MD

I dont have anything come up when i boot other than a big white acer logo and then it does two smaller acer white logos side by side. Then it does the android boot animation. I booted into recovery and it is thor v5 not the one i had chosen in afterOTA. I just want to know what to do from here. Should i try again or use another method?

I just dont want to flash an ICS Rom without the ICS bootloader.and is there another way other than afterOTA to check the boot loader version?

york629 said:
I just dont want to flash an ICS Rom without the ICS bootloader.and is there another way other than afterOTA to check the boot loader version?
Click to expand...
Click to collapse
Well, after ota didn't work then. You should have seen the txt immediately on boot. (the split acer tells me it's a HC modified ICS kernel in the rom).
You could try manually flashing the bootloader with NVFlash.
My theory, is that you should install the OTA/Full version of ICS. This will install the stock bootloader, then, you can run the after OTA app. Reason being, is that my theory is that the real ICS bootloader creates something the HC BL doesn't. And when you try NVFlashing the unlocked bootloader, it just doesn't take. It's been happening several times recently.

Is there a forum guide on installing the OTA/full version of ICS? Would I basically bring it to stock bootloader and ROM then use AfterOTA to flash the new bootloader and recovery? Sorry for the n00bish questions, every device seems to use different methods and when I didn't start with the thing until after someone else did the initial stuff I dont want to mess it up, this is a really nice tablet. Thanks for the help, You guys are the best on here.

Yep, you are basically taking it back to stock then using afterOTA to install the new bootloaders but most importantly get root access and a new open recovery...

Is the best way to go stock by using afterOTA? Or should I just try a different method on the forums?

It clearly states on AfterOTA's first post that it does not work on custom roms and only the OTA so yes, download the ota ruu and install it. Then run afterota and you will be able to install a custom rom after that. Or use blackthunders apx tool to update the bootloader.

yes, that was an over sight on my part, I was excited to update everything so easily. where/what is the OTA RUU ? sorry to be a pain but if you could just point me to a forum guide on going completely stock I would appreciate it. I don't see anywhere to get the OTA update.zip file I need to flash, I found this here http://forum.xda-developers.com/showthread.php?t=1113878 is this the post I need? and do I need the update or the full package? does it matter if I use the honeycomb full package if I am just going to use afterOTA to install an ICS bootloader and recovery?

[Q] Help Please, I need unlocked bootloader and recovery for A500 OTA ICS

I have an A500 with OTA ICS.
Android Build : Acer_AV041_A500_1.033.00_PA_CUS1
Bootloader : 0.03.12-ICS
I tried using afterota to install bootloader and recovery. Did not work, it goes thru all the steps but I still have stock recovery.
I used blackthund3r's one click rooting tool. So I now have root.
I am not sure what to do next. Flash a recovery or the bootloader.
Thanks for any help!

telemike said:
I have an A500 with OTA ICS.
Android Build : Acer_AV041_A500_1.033.00_PA_CUS1
Bootloader : 0.03.12-ICS
I tried using afterota to install bootloader and recovery. Did not work, it goes thru all the steps but I still have stock recovery.
I used blackthund3r's one click rooting tool. So I now have root.
I am not sure what to do next. Flash a recovery or the bootloader.
Thanks for any help!
Click to expand...
Click to collapse
You must have missed that part that says you never ask questions in the development section. Sheesh.

telemike said:
I have an A500 with OTA ICS.
Android Build : Acer_AV041_A500_1.033.00_PA_CUS1
Bootloader : 0.03.12-ICS
I tried using afterota to install bootloader and recovery. Did not work, it goes thru all the steps but I still have stock recovery.
I used blackthund3r's one click rooting tool. So I now have root.
I am not sure what to do next. Flash a recovery or the bootloader.
Thanks for any help!
Click to expand...
Click to collapse
Read all the info in the guide of my link m8 , if you are on stock OTA ics you need to delete "recovery-from-boot.p" from /system , if not you get stuck with stock recovery every time you reboot.

I aplogize for posting in wrong forum. Asked mods to move. Was able to make it work with Blackthund3r's tools and afterota.

[Q] Need help unlocking/patching Bootloader

Hi! im a new owner of Acer A500 8gb. I want to unlock the bootloader but im not REALLY SURE it is okay for me to follow this guide to unlock my bootloader. My Acer A500 is already rooted and my bootloader is 0.03.12-ICS as shown in Acer Recovery Installer. Btw, the search bar just disappeared so I cant search for tutorials on unlocking/patching bootloader.
Not sure I suppose to follow that guide http://forum.xda-developers.com/showthread.php?t=1622425
or
http://forum.xda-developers.com/showthread.php?t=1619913
thank you for taking my time!

You can follow http://forum.xda-developers.com/showthread.php?t=1622425 and use Blackthunder's tool if its ok with you. Or I can tell you one more method:
1. Download After OTA from forum section. Search for it you will find a .zip file of about 103 mb.
2. Download and install the Acer a500 drivers.
3. Attach your tablet to the computer.
4. Unzip After OTA and run it.
5. From standard tab select your desired Bootloader and recovery, you can select any except HC Bootloader for running ICS. Remember to select A50X.
6. Remember if you are having ICS rom its OK, but if you do not have ICS Rom than keep one in your sd card to flash after installing the Bootloader.
7. You might also brick up your tab if anything went wrong so be carefull.
"Thanks to the original developers for the After OTA tool and Guides available."

okay, i already download OTA TOOLS. On standard tab which bootloader and recovery should I pick?

ahhh cant patch/unlock the bootloader. Is just me or Acer double lockdown the bootloader? I did A500APXFLASH.exe, didn't work, the progress bar wont move on flashing bootloader. I also did AfterOTA.exe but nope didn't work. It just hang on [3/5] flashing bootloader. Im getting stumped now

Ok, if you are stuck and are unable to run any rom first of all reinstall your boot loader using update.zip file from http://forum.xda-developers.com/showthread.php?t=1113878
Remember select bootloader which you were having previously, i.e. if you were having 3.2 honeycomb than select any one from the lists of 3.2 updates.
Now you can use after OTA, remember your Tab should be running safely for After OTA to work.

My Acer A500 is running fine. It just I cant flash this bootloader. But i will follow this guide to reinstall the bootloader. thanks!

I just added this post, maybe it'll help you too!
http://forum.xda-developers.com/showthread.php?t=1760509

[Q] Help with Acer Iconia A500 Tablet

Hello people of the forum, I am newbie with android, I've been asking for help because my tablet stopped working after I followed a tutorial to route it, I used a program "Afterota v1" tutorial here on the forum in order to install APX more now I can no longer start, he did not ask to update.zip, I do not know what it ta asking update the screen as it is in the image Please someone help me to recover it.:crying:
the picture in this link, take the space, as I am new user can not post link, thanks
http : // img43.imageshack. us/img43/8262/a500c. jpg

jinhad said:
Hello people of the forum, I am newbie with android, I've been asking for help because my tablet stopped working after I followed a tutorial to route it, I used a program "Afterota v1" tutorial here on the forum in order to install APX more now I can no longer start, he did not ask to update.zip, I do not know what it ta asking update the screen as it is in the image Please someone help me to recover it.:crying:
the picture in this link, take the space, as I am new user can not post link, thanks
http : // img43.imageshack. us/img43/8262/a500c. jpg
Click to expand...
Click to collapse
the picture looks ok...
check your external sd card - make sure there is not an "update.zip" on that or your internal "sd card"
the writing you see on yr tab is ok you should be able to just
"reboot" the tab and be all good??
try running the afterOTA again....
PS >>> oh are you trying to flash the unlocked bootloader or rollback to HC??

dibb_nz said:
the picture looks ok...
check your external sd card - make sure there is not an "update.zip" on that or your internal "sd card"
the writing you see on yr tab is ok you should be able to just
"reboot" the tab and be all good??
try running the afterOTA again....
PS >>> oh are you trying to flash the unlocked bootloader or rollback to HC??
Click to expand...
Click to collapse
Thanks for responding:good:, so I've tried using afterOTA again, although not the usb connection. I was trying to put recovery_twrp_2.1.3-ICS.img with apx mode, it restarted and gave PASS screen, but now is only on this screen, asking "update.zip", already put in external SD: Acer_AV041_A500_1.031.00_WW_GEN1.zip, FLEX-Resurrection_Rev1-Aroma-Public.zip, cwm_hc_ics_root.zip, and nothing.
I have this information:
Tablet Cpuid: 037C624341E05557
Tablet Sbk: 0x17A51E00 0x94ABD401 0x7BE23003 0x340A2103
Android Build: Acer_AV041_A500_1.031.00_WW_GEN1
Bootloader: 00:03:12 ICS-

jinhad said:
Thanks for responding:good:, so I've tried using afterOTA again, although not the usb connection. I was trying to put recovery_twrp_2.1.3-ICS.img with apx mode, it restarted and gave PASS screen, but now is only on this screen, asking "update.zip", already put in external SD: Acer_AV041_A500_1.031.00_WW_GEN1.zip, FLEX-Resurrection_Rev1-Aroma-Public.zip, cwm_hc_ics_root.zip, and nothing.
I have this information:
Tablet Cpuid: 037C624341E05557
Tablet Sbk: 0x17A51E00 0x94ABD401 0x7BE23003 0x340A2103
Android Build: Acer_AV041_A500_1.031.00_WW_GEN1
Bootloader: 00:03:12 ICS-
Click to expand...
Click to collapse
Because, you still are running a stock rom,. more or less.
The problem happens, because you are re-booting after installing the custom recovery. And the rom you are running, is booting it to stock recovery (it's overwriting your custom recovery) which explains why it's looking for update.zip
What you need to do, is after installing your custom recovery, boot immediately to it Via adb, or shut down and boot using Vol- and PWR. Then install your custom rom.
MD

Moscow Desire said:
Because, you still are running a stock rom,. more or less.
The problem happens, because you are re-booting after installing the custom recovery. And the rom you are running, is booting it to stock recovery (it's overwriting your custom recovery) which explains why it's looking for update.zip
What you need to do, is after installing your custom recovery, boot immediately to it Via adb, or shut down and boot using Vol- and PWR. Then install your custom rom.
MD
Click to expand...
Click to collapse
I understand, I'm stuck in this mode, how can I do the adb, this procedure, detroit afterOTA the folder, I have a folder with adb is this?, as does the process? Thank you.

jinhad said:
I understand, I'm stuck in this mode, how can I do the adb, this procedure, detroit afterOTA the folder, I have a folder with adb is this?, as does the process? Thank you.
Click to expand...
Click to collapse
keep in mind that flashing custom roms and recovery's REQUIRE the unlocked bootloader be flashed FIRST... I'd suggest apxFlash tool to do that....all u need is in civatos bootloader thread, pls read very carefully. do the first 4 steps and then use apxFlash tool to complete the process....if u don't do things exactly as written you'll end up in trouble....
good luck
Sent from my GT-I9300 using Tapatalk 2

SOLVED
dibb_nz said:
keep in mind that flashing custom roms and recovery's REQUIRE the unlocked bootloader be flashed FIRST... I'd suggest apxFlash tool to do that....all u need is in civatos bootloader thread, pls read very carefully. do the first 4 steps and then use apxFlash tool to complete the process....if u don't do things exactly as written you'll end up in trouble....
good luck
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thank you friend, I managed to solve reading .. is that as I am the brail, my english ta weak and had difficulty understanding, most did all the steps and got .. Thank you.