Related
is there someone how to get application from Windows Mobile 5.0's ROM ,such as battery monitor.
Hi
did you already read about grab_it and dumprom? The first will make a dump of the rom and the second tool will extract all files from the dump.
What will you do with the file?
If you like to disable a rom executable, just copy another executable on top of it (use the same name). The rom file is then behind and will not be launched. So you can disable, for example, ActiveSync comming up, if you write a small exe and place it as repllog.exe in the windows dir.
regards
Josef
Anyone knows how to install IBM Websphere Everyplace Micro Environment v6.0 (for WM5) - VGA High Res for the Universal?
It creates a MidLet Manager.
After downloading the program and installing the exe file only the files are installed on the C: drive. It does not install to the UNiversal although activesync is on and there's no cab file to install on the Universal.
Anyone knows where's the cab file?
Thanks
Try checking your PC to see if it has extracted the Cab to the hard drive while attempting an install. You will often find it in
\Program Files\Microsoft ActiveSync.
Sometimes you can also find it in the exe file by opening it with WinRAR.
RE
Hi admisi,
Nope, even unRAR cannot locate the cab file. Its not even in \Program Files\Microsoft ActiveSync since the program does not sync with my Universal even with AS connected.
However, and finally, I managed to get it installed
There's a pdf file with the following instructions :-
1. Download the product Installer to the Host PC from the following Web site: http://www.ibm.com/software/wireless/weme/.
Note: Three versions of the product installer are available. One version supports PDA with VGA/Hi-Res, another supports PDA with QVGA, and the last supports Smartphone with QVGA.
• PDA with VGA/Hi-Res support: ibm-weme-wm50-arm-vga-midp20-6.0.0-
YYYYMMDD-######-###.exe
• PDA with QVGA support: ibm-weme-wm50-arm-midp20-6.0.0-YYYYMMDD-######-
###.exe
• Smartphone with QVGA support: ibm-weme-wm50-sp-arm-midp20-6.0.0-YYYYMMDD-######-###.exe
2. Use the Extraction Wizard to extract the files. IMO, just install to default location. Extract the files to the default location indicated.
3. Use File Explorer to go to the root folder on your mobile device and create a new folder named J9.
4. Open the J9 folder and create a MIDP20 folder.
5. Copy the previously unzipped bin, lib and examples (can ignore this) directories to the MIDP20 folder.
Note: These directories can be copied to any location you choose on the target file system; however, the \bin and \lib directories must remain intact. The base J9 executable and its shared objects must remain in the \bin directory.
Some steps have been ignored.
:lol: :lol: :lol:
Does the personal profile version support midlets too? or only the MIDP version supports it?
hollafrontz said:
Does the personal profile version support midlets too? or only the MIDP version supports it?
Click to expand...
Click to collapse
Nope, PE doesn't support midlets and vica versa.
BTW, here's my tutorial on the 6.1 install: http://www.pocketpcmag.com/blogs/index.php?blog=3&p=787&more=1&c=1&tb=1&pb=1
I finally got my ftp up and running. As promised, I have uploaded a slightly modified Vista backup for Acronis. It contains a preinstalled version of Office 2007. So, if you dont own Office 2007, please uninstall it
(Right-Click here and choose Save as...)
MyBackup.tib Slighty modified post-recovery Vista. Reg tweaks and Office 2007 (thanks to TokyoRob for providing the original)
Acronis will be back soon
RealVGA_11.CAB gives you real VGA under SnapVue
ResPack128dpi.ARM.CAB resolution pack for RealVGA
Recovery Partition Content.rar I guess the file name is meaning enough (thanks to devictoria for the upload, i know it was painful)**FIXED**
TabletPC_PatchXPproSP2.exe TabletPC patch for a non WINXP SP2 installation, can be applied at any time. Tested with English version only.
change_vista_language.iso Vista PE to change the language of any Vista installation, tested with HTC Shift.
Vista_x64_language_packs_links.html language pack needed for "change_vista_language.iso" (64bit)
Vista_x86_language_packs_links.html language pack needed for "change_vista_language.iso" (32bit)
WINMOUNT (tool to mount XVISTA.WIM) will be replaced with Microsofts WAIK (use ImageX.exe and command line)
http://www.microsoft.com/downloads/...6D-15F3-4284-9123-679830D629F2&displaylang=en
hdat2iso_4_6b1.zip boot image to use Hdat2, tool for SETMAX address and unhide HPA
hsect-2.1win32.zip POF's very loved HTC SHIFT EMBEDDED CONTROLLER TOOL
testdisk-6.9.dos.zip tool to unhide the recovery partition
Update 07/05/2008:
HTC Shift XP Drivers.rar added the Windows XP drivers and Vitakey package by febelus (http://forum.xda-developers.com/showthread.php?t=386492)
Update 07/23/2008
A-Patch140rc2b31_WLM.zip added to modify WindowsLive Messenger 8.5 (this enables you to save some desktop space when chatting)
Update 08/08/08 (nice date..should get married today)
Removed illegal content, such as Keygens, Crack and Serial. Trial versions should suffice. Added Windows Automated Installation Kit (WAIK) to alter the recovery partition content (license free).
The server is planned to be permanent, but only temporarily public. In one or 2 months, I will change the access to
ease my traffic. But until then, grab it while you can.
If anyone wants to add something (tools, different languages), please contact me for upload instructions. This ftp is planned to stay permanent.
https://phatpipez.homeftp.org/HTCShift/Shift/A-Patch140rc2b31_WLM.zip
Fingerprint_and_Omnipass.rar
HTC Shift DRIVER - Vista.zip
https://phatpipez.homeftp.org/HTCShift/Shift/MyBackup.tib
OrigamiExperiencePackv2.msi
Original WWE.rar --- original Windows Mobile rom for Shift.
https://phatpipez.homeftp.org/HTCShift/Shift/RealVGA_11.CAB
https://phatpipez.homeftp.org/HTCShift/Shift/Recovery Partition Content.rar
https://phatpipez.homeftp.org/HTCShift/Shift/testdisk-6.9.dos.zip
Aquasesh
I have tested the connection to my FTP... Its HTTPS, you have to install or allow the certificate in order to access my files.
Also, use Firefox or Opera to download. IE7 suffers from a HTTP Header error when accessing large files. ( i tried to fix it, but no luck)
Dont tell me its a nuisance to use FF or Opera instead of IE7.
If you really need / want those files, you should be willing to install one of those browsers...
I will UPDATE the files next Friday, any request, let me know.
Aquasesh
UPDATE 08/08/08
Windows Automated Installation Kit (WAIK)
This is used to create your own recovery partitions. You can slipstream updates, software and drivers.
It is license free and can be optained from the link in post #1.
To mount the XVista.wim from the Shift's recovery partition, locate the ImageX.exe in your programs folder.
(default =C:\Program Files\Windows AIK\Tools\x86\imagex.exe)
Copy the XVista.WIM to a location of your choice (preferably c and run the Imagex.exe in the Command Prompt.
First you have to find out which installation you want to mount. Usually Vista contains more than one installation
(Home, Home Premium, etc...) Each has a number.
In our case its easy, its only Vista Business, so we mount Number 1.
Type imagex.exe /mountrw c:\Xvista.wim 1 c:\Xvista
mountrw means read and write access
c:\Xvista.wim is the location you copied it....
1 is the image number within the archive
c:\Xvista is the mount path (can be anything you want)
The installation should now appear in Windows Explorer like a normal folder and you can modify its contents.
Recovery Image
With regards to the recovery partition restoration process;
The previously referenced instructions involve using a binary file to dd the image back to the disk.
When your RAR file is unarchived, it shows a directory structure with multiple files and one large WIM file.
What mechanism should one use to replicate the RAR contents to the recovery partition?
Thanks..
jposluns said:
With regards to the recovery partition restoration process;
The previously referenced instructions involve using a binary file to dd the image back to the disk.
When your RAR file is unarchived, it shows a directory structure with multiple files and one large WIM file.
What mechanism should one use to replicate the RAR contents to the recovery partition?
Thanks..
Click to expand...
Click to collapse
The binary file you are referring to is a result of a different recovery approach. You copy the hidden partition into a binary file and copy it back to its exact location on the hdd, later.
If you want to use my RAR file, you have to follow these instructions, to create an external boot media.
http://forum.xda-developers.com/showthread.php?t=393070
Thanks for the files. MyBackup.tib is not working(not able to download).
TRoN_1 said:
Thanks for the files. MyBackup.tib is not working(not able to download).
Click to expand...
Click to collapse
im not sure what the problem is in IE7. But with Opera and Firefox, the download works normal.(rightclick "save as")
I will try to see how I can fix it.
aquasesh said:
The binary file you are referring to is a result of a different recovery approach.
Click to expand...
Click to collapse
Not having access to a USB floppy, would anyone happen to have the binary file that is used with the dd method?
Thanks..
MyBackup.tib Slighty modified post-recovery Vista. Reg tweaks and Office 2007 (thanks to TokyoRob for providing the original)
Recovery_Partition_Content.rar I guess the file name is meaning enough (thanks to devictoria for the upload, i know it was painful)**FIXED**
Great files, thanks.
I can't download files above. The first one is about 278 MB long, corrupted after download. The second one is 0-length file. Would you please check it? Thank you for your time.
When I right-click and save as...
Internet Explorer cannot dowload MyBackup.tib.
The supplied HTTP header is invalid.
TRoN_1 said:
When I right-click and save as...
Internet Explorer cannot dowload MyBackup.tib.
The supplied HTTP header is invalid.
Click to expand...
Click to collapse
Please use Firefox or Opera to download it. I have some trouble with my
Server...but those browsers work
They also support resume, which is recommended with such large files.
@jposluns
you need a USB Stick, not a floppy. The image as well as the BIN file are about 3GB.
You can also burn the contents to a DVD if you make it bootable. I havent tried it yet, but should work.
aquasesh said:
you need a USB Stick, not a floppy. The image as well as the BIN file are about 3GB. You can also burn the contents to a DVD if you make it bootable. I havent tried it yet, but should work.
Click to expand...
Click to collapse
There is something critical that I'm missing here..
The instructions in the link you provided imply that the USB drive will be bootable, and that it is from there that the recovery will occur.
Your RAR file does not have an MBR, nor does it apparently have a tool to install one, so *something* would have to be used in order to install an MBR to the USB drive.
What is that *something* ?
Thanks..
jposluns said:
There is something critical that I'm missing here..
The instructions in the link you provided imply that the USB drive will be bootable, and that it is from there that the recovery will occur.
Your RAR file does not have an MBR, nor does it apparently have a tool to install one, so *something* would have to be used in order to install an MBR to the USB drive.
What is that *something* ?
Thanks..
Click to expand...
Click to collapse
To make it short, you have 3 choices.
Firstly, you wait until i create a bootable recovery ISO, which you can burn to a USB stick. (maybe on Friday, if I can make the time)
Secondly, you try to make one yourself.
Or, you simply download Acronis TI Home, install it on a PC, create a recovery bootdisk, which you can put on a USB stick and use Mybackup.tib from my ftp to restore the Shift.( I usually use this method, since I dont have to setup anything, and I have office 2007 integrated)
I will try to polish up the problems on my FTP coming weekend and add some more stuff, USB iso and so on.
If you can tell me what mechanism is used to make the MBR in the recovery partition, I can make an ISO myself.. I've tried a few different boot loaders, though none seem to work with the RAR contents.
Or.. If an Acronis image of JUST the MBR/Track0 for the recovery partition is available, that would be relatively simple too.
Worst case, I'll wait for your ISO.
Thanks for all your help!
jposluns said:
If you can tell me what mechanism is used to make the MBR in the recovery partition, I can make an ISO myself.. I've tried a few different boot loaders, though none seem to work with the RAR contents.
Or.. If an Acronis image of JUST the MBR/Track0 for the recovery partition is available, that would be relatively simple too.
Worst case, I'll wait for your ISO.
Thanks for all your help!
Click to expand...
Click to collapse
To make it a media bootable for a recovery, you need to use etfsboot.com
found in the folder /BOOT
Now, i have to find out which commandline parameter i have to use, which will take some trying out.
Worst case scenario, I can only make DVD bootable, but even that would be ok for most.
Working ISO.. Wish me luck..
I've just followed the instructions at http://www.mydigitallife.info/2007/05/10/how-to-make-vista-bootable-dvd-with-wim-downloaded-files/ to create an ISO file using the WIM files from your RAR.
UltraISO can then be used to image the ISO onto a USB stick (4Gb or greater).
I'm in the process of doing so right now and will test it tomorrow morning.
jposluns said:
I've just followed the instructions at http://www.mydigitallife.info/2007/05/10/how-to-make-vista-bootable-dvd-with-wim-downloaded-files/ to create an ISO file using the WIM files from your RAR.
UltraISO can then be used to image the ISO onto a USB stick (4Gb or greater).
I'm in the process of doing so right now and will test it tomorrow morning.
Click to expand...
Click to collapse
Looks like a good guide. Those seem like the right etfsboot parameters.
Im sure you can do it.
its basically the same way HTC does it, I guess the boot.wim contains the WindowsPE for the recovery.
Good Luck
Recovery Image was too big, please share it in eMule!
aquasesh said:
I finally got my ftp up and running. As promised, I have uploaded a slightly modified Vista backup for Acronis. It contains a preinstalled version of Office 2007. So, if you dont own Office 2007, please uninstall it
URL is https://phatpipez.homeftp.org/HTCShift
you will also find all the stuff i use on my shift, such as:
MyBackup.tib Slighty modified post-recovery Vista. Reg tweaks and Office 2007 (thanks to TokyoRob for providing the original)
Acronis True Image 11 Build 8053 Home.rar we all know this
MMSLite.bld265.CAB MMS addon, WM 5 and 6 for SOFTBANK ONLY
RealVGA_11.CAB gives you real VGA under SnapVue
ResPack128dpi.ARM.CAB resolution pack for RealVGA
Recovery_Partition_Content.rar I guess the file name is meaning enough (thanks to devictoria for the upload, i know it was painful)**FIXED**
TabletPC_PatchXPproSP2.exe TabletPC patch for a non WINXP SP2 installation, can be applied at any time. Tested with English version only.
UltraISO_Premium_Edition_v9.1.2.2465 can burn bootable image files to USB media
change_vista_language.iso Vista PE to change the language of any Vista installation, tested with HTC Shift.
Vista_x64_language_packs_links.html language pack needed for "change_vista_language.iso" (64bit)
Vista_x86_language_packs_links.html language pack needed for "change_vista_language.iso" (32bit)
WinMount.v2.2.2.rar tool to mount .WIM files. Such as XVISTA.WIM
hdat2iso_4_6b1.zip boot image to use Hdat2, tool for SETMAX address and unhide HPA
hsect-2.1win32.zip POF's very loved HTC SHIFT EMBEDDED CONTROLLER TOOL
ppxsetup2.rar PPXplorer for Windows Mobile. Good file commander.
testdisk-6.9.dos.zip tool to unhide the recovery partition
Update 07/05/2008:
HTC Shift XP Drivers.rar added the Windows XP drivers and Vitakey package by febelus (http://forum.xda-developers.com/showthread.php?t=386492)
The server is planned to be permanent, but only temporarily public. In one or 2 months, I will change the access to
ease my traffic. But until then, grab it while you can.
If anyone wants to add something (tools, different languages), please contact me for upload instructions. This ftp is planned to stay permanent.
Aquasesh
Click to expand...
Click to collapse
Hi aquasesh,
It is very difficult to download the recovery image with Firefox or IE, can you please share it in eMule, so that more Shift owners can download it share it.
Thanks in advance.
szjohnwong said:
Hi aquasesh,
It is very difficult to download the recovery image with Firefox or IE, can you please share it in eMule, so that more Shift owners can download it share it.
Thanks in advance.
Click to expand...
Click to collapse
I dont think sharing it in Emule is better than using Firefox.
I dont understand how it can be difficult to download it via a different
browser...Its just the same as IE
you just install opera or FF and rightclick the file you want...then choose "save as"....
Besides, sharing it in Emule is too slow, it will take ages to download it.
jposluns said:
I've just followed the instructions at http://www.mydigitallife.info/2007/05/10/how-to-make-vista-bootable-dvd-with-wim-downloaded-files/ to create an ISO file using the WIM files from your RAR. UltraISO can then be used to image the ISO onto a USB stick (4Gb or greater).
Click to expand...
Click to collapse
Update: An ISO was built, though when I imaged it to USB and booted off of it, an error of "can't find HP WIM files" resulted. I believe that the version of the <surrounding files exe> that I used was specific to HP, and there are a few more WIM files it's expecting. I've downloaded another variant and have it building an ISO now.
I installed Opera and when I right-click and save as, it downloads and says it saved the file. I did this 3 times in 3 different folders (I aborted once), but the files is nowhere to be found. In Opera under Transfers tab it says:
From https//phatpipez.homeftp.org
To D:\MyBackup.tib
Size 4.3 GB(4,576,253,952)
Transfered 4.3 GB(4,576,253,952)
The file is NOT there. I don't get it
I have the 3VO rom on the htc snap and when connected to my win 7 pc I can not locate the /windows directory. I of course have the option to view hidden files checked but this was to no avail.
Hi there,
That is perfectly normal if you are trying to see it from the win7 mobile device center. Bill doesn't want you to mess with the system files. In order to access this directory, you have several options :
- install a proper file explorer such as Total commander or Resco file explorer on you device, and do it from there
- I think Mymobiler allows you to access this directory from the PC. Needs a check though, I uninstalled this program that kind of bugged me. see http://www.mymobiler.com/manual.aspx
Anyway, I would assume your problem does not come from the 3vo ROM.
Have Tevion gps device, wince 4.2, no usb port, just sd card. It have Igo8 software that loads automatically on boot. I managed to unlock device with some program and gain access to all win folders. Then, accidentally, I moved some important file from Flash Disk on internal memory and now device just boot to splash screen and nothing more. That file called Igolaunch.exe and I have it, just don't have access anymore to windows files to copy it on right place. Without that file device don't know what to do, and do nothing, just boot to splash image. The windows files, registry, are intact, just need to copy back Igolaunch.exe to it's original location. So, is there any way to gain access to win files again, like force load some explorer from sd card on boot, or something like that, just to copy back the file? Any other solution, some reset, maybe? Thanks.
Try this: http://www.austech.info/gps/84958-gps-ce-6-0-rescue-disk.html
Note: You must register with Austech to see the download link.
YESSS! Success!
Thank you very much! This is just that I needed! Followed instructions and boot in explorer (desktop), copy-back the igolaunch.exe to it's original location and everything working again! Thanks again!
snebojsa said:
Have Tevion gps device, wince 4.2, no usb port, just sd card. It have Igo8 software that loads automatically on boot. I managed to unlock device with some program and gain access to all win folders. Then, accidentally, I moved some important file from Flash Disk on internal memory and now device just boot to splash screen and nothing more. That file called Igolaunch.exe and I have it, just don't have access anymore to windows files to copy it on right place. Without that file device don't know what to do, and do nothing, just boot to splash image. The windows files, registry, are intact, just need to copy back Igolaunch.exe to it's original location. So, is there any way to gain access to win files again, like force load some explorer from sd card on boot, or something like that, just to copy back the file? Any other solution, some reset, maybe? Thanks.
Click to expand...
Click to collapse
Ive a Clarion NICE 7 GPS system with WinCE NET 4.2 core. Its running on their software. It have no menu,no taskbar,nothin ,but It have a USB port and no SD card slot. I need help with this , help me. I need help to get access to win files and folders. And is there any way to flash/crack/hack/root this device to Win CE 6 or something?:crying:
Did you try that what @jwoegerbauer said? With his software i was able to access files on device. Because you don't have sd card, try to connect device to pc and put files on internal storage.
For wince 6.0, think not.
snebojsa said:
Did you try that what @jwoegerbauer said? With his software i was able to access files on device. Because you don't have sd card, try to connect device to pc and put files on internal storage.
For wince 6.0, think not.
Click to expand...
Click to collapse
Hey,
i didnt find any link to the software u r talking about. where to find it?
and if it didnt work, any other method to install WinCE 6 or android to this device(running CE 4.2) ?
plz help:crying::crying:
Go to the link he posted, register on site and you will see the link.
snebojsa said:
Go to the link he posted, register on site and you will see the link.
Click to expand...
Click to collapse
This is how my menu displays and i want to change it into CE6 ! but the software (in link) is not working
need help :crying::crying:
First you wrote that you need help to get access to win files and folders, that software enable you to do that.
If you want to change appearance and gps software that device is using, you need to unlock device. There is a lot of tutorials how to do that, just google it. For example, you can try this:
http://gpsunderground.com/forum/other-device-unlock/5844-how-unlock-any-gps-wce-4-2-5-6-a.html
Help
hey,
now i got a china gps (MSUR S430) , and i think the software was deleted. i dont know. its showing
"The storage flash has no invalid data,
now formate it and program it through SD/MMC card
...........................................................................
...........................................................................
...........................................................................
detecting SD/MMC card.... not found "
Only showing this. after inserting blank SD/MMC its showing MSUR and stuck at that .Is there any way to reset it or insert a new software?
this is my only device i have.
please help. need help
MSUR S430
A quick internet search using Bing resulted in
>>>>>>>>>>>> Chinese text
版本号：1.0
地图大小：10M
适用机型：4.3寸～5寸导航等无机身内存机型（480×272）
使用说明：
1、下程序包： 点击此处下载，下载Shell.ini：点击此处下载
2、下载到的程序包为RAR文件压缩包，请先在电脑进行解压缩
3、将解压后的“名讯科技”文件夹和“Shell.ini”复制到储存卡
4、点击主界面“导航”图标，能出现上图代表成功，接下来只需要复制相应地图到储存卡中即可
如果无效请再进行下列步骤：
1、打开导航仪进入“设置”，然后选“GPS导航路径”设置，点击中间按钮进入设置，依次双击选择 sdmmc --> 名讯科技 --> MSUR.EXE；然后保存设置（右上角“方形”的图标）
2、点击主界面“导航”图标，出现上图代表成功，接下来只需要复制相应地图到储存卡即可
>>>>>>>>>>>> Translated to English:
Version number: 1.0
Map size: 10M
For use on: 4.3 inch ~5 inch navigation without fuselage memory models (480x272)
Instructions for use:
1, under the package: click here to download, download Shell.ini: click here to download
2, download the RAR file cabinet for the package, first in the computer to extract
3, after extraction of the "information technology" folder and the "Shell.ini" copy to memory card
4, click on the main interface of "navigation" icon will appear above represent success, then only need to copy the corresponding map to the storage card can be
If that doesn't work, please do the following steps:
1, open the Navigator to enter "settings", then select "GPS navigation path" setting, click on the middle button to enter the Setup, double-click Select sdmmc technology--> MSUR-->. EXE and then save settings (top right corner "square" icon)
2, click on the main interface of "navigation" icon represents a success appear, then just copy the appropriate map to memory card
>>>>>>>>>>>> Resume
What I suspect is, that your unit expects a file named shell.ini in root of SD-card is present - with which the MSUR S430 indeed gets and/or can be steered.
jwoegerbauer said:
A quick internet search using Bing resulted in
>>>>>>>>>>>> Chinese text
版本号：1.0
地图大小：10M
适用机型：4.3寸～5寸导航等无机身内存机型（480×272）
使用说明：
1、下程序包： 点击此处下载，下载Shell.ini：点击此处下载
2、下载到的程序包为RAR文件压缩包，请先在电脑进行解压缩
3、将解压后的“名讯科技”文件夹和“Shell.ini”复制到储存卡
4、点击主界面“导航”图标，能出现上图代表成功，接下来只需要复制相应地图到储存卡中即可
如果无效请再进行下列步骤：
1、打开导航仪进入“设置”，然后选“GPS导航路径”设置，点击中间按钮进入设置，依次双击选择 sdmmc --> 名讯科技 --> MSUR.EXE；然后保存设置（右上角“方形”的图标）
2、点击主界面“导航”图标，出现上图代表成功，接下来只需要复制相应地图到储存卡即可
>>>>>>>>>>>> Translated to English:
Version number: 1.0
Map size: 10M
For use on: 4.3 inch ~5 inch navigation without fuselage memory models (480x272)
Instructions for use:
1, under the package: click here to download, download Shell.ini: click here to download
2, download the RAR file cabinet for the package, first in the computer to extract
3, after extraction of the "information technology" folder and the "Shell.ini" copy to memory card
4, click on the main interface of "navigation" icon will appear above represent success, then only need to copy the corresponding map to the storage card can be
If that doesn't work, please do the following steps:
1, open the Navigator to enter "settings", then select "GPS navigation path" setting, click on the middle button to enter the Setup, double-click Select sdmmc technology--> MSUR-->. EXE and then save settings (top right corner "square" icon)
2, click on the main interface of "navigation" icon represents a success appear, then just copy the appropriate map to memory card
>>>>>>>>>>>> Resume
What I suspect is, that your unit expects a file named shell.ini in root of SD-card is present - with which the MSUR S430 indeed gets and/or can be steered.
Click to expand...
Click to collapse
Thanks for the reply. I understand everything.
But only problem is How and where o download this (above mentioned) cab file and shell.ini file ? how did u find suggestions about MSUR S430?
waiting for ur reply
bellu1911 said:
Thanks for the reply. I understand everything.
But only problem is How and where o download this (above mentioned) cab file and shell.ini file ? how did u find suggestions about MSUR S430?
waiting for ur reply
Click to expand...
Click to collapse
I suggest you ask them directly your questions: http://www.msur.com.cn/zh-cn/feedback.asp
Is there any chance that i can boot wince 4.2 or 5 in this device? Looks like its bricked. Is itpossible to installcustom firmware like miopocket or tomtom or navigator etc? Or just plain win CE ?