hello everyone.
im new with iconia a501 because its my friend's.
we tryed to update it, but its stuck in bootloop.
update we installed is oficial ota 4.0.1.
everything looked fine untill it rebooted. then system ui crashed. and it keeps rebooting and crashing .
I dont know what to do. I really feel his pain in loss.
sd card is not working, wich is not hellping.
dont have cpuid, so cant flash.
no root or cwm installed or backup...
is there any possibility to revive?
or is there any specialist in uk, who could fix it?
I think I read all threads in xda foroms. and everything I could find in google.
can't apply any method found.
any ideas? or suggestions anyone?
any help is appreciated.
I'd be trying a full wipeto fix System.ui from crashing. If u can not boot, you'll need to factory data reset....reset pin + pwr+ lock switch, tab should vibrate then erase data and cache.
Also boot while holding volume up button...do u see a fastboot menu or "skrilax_cz bootloader" screen...just to see which bootloader is on the tab.
You say sd card won't work.....wot doesn't work..check both sets of drivers are installed. ...Acer and android ones.
Hopefully the data reset will get u going...If not there's still few things we can try.
You can get yr cpuid/sbk thru apx mode using ubuntu, there's a sticky in general forum.
Thank you very much I'll try everything tonight.
Sent from my GT-N7000 using xda premium
smple factory reset did the job. my friend is enjoying his iconia again. now even more tbo
thank you for help again.
case closed.
Sent from my GT-N7000 using xda premium
Awesome news....pls ask yr friend to get the cpuid of the tab, it's the only way of fixing future potential bricks, saves a lot of stress and effort
Sent from my GT-I9300 using Tapatalk 2
Related
First off let me start by saying I now know what i did wrong. Next is there anyway i can fix it?
I didn't backup anything and then managed to erase everything... I have CM 6 but as of now all i can get is the boot screen. I tried recovery but that won't work becasue there is no backup. also Before I erased everything i managed to turn s on so now i have no way to turn that off correct? Im basicly looking for a way to restore my phone but if it cant be done then i understand. Right now I am using a samsung vibrant with Nero v3 voodo and understand how to install custom roms now
i have almost the same problem as you I don't know what to do I've looked everywhere.
zigg82 said:
First off let me start by saying I now know what i did wrong. Next is there anyway i can fix it?
I didn't backup anything and then managed to erase everything... I have CM 6 but as of now all i can get is the boot screen. I tried recovery but that won't work becasue there is no backup. also Before I erased everything i managed to turn s on so now i have no way to turn that off correct? Im basicly looking for a way to restore my phone but if it cant be done then i understand. Right now I am using a samsung vibrant with Nero v3 voodo and understand how to install custom roms now
Click to expand...
Click to collapse
What do you mean... erase everything? How?
Possible steps:
1. factory reset from H-Boot, see if it boots up normally, then re-root.
2. Install PD15IMG from development section, look it up.
Good luck.
Man, do I feel like an idiot...
borodin1 said:
What do you mean... erase everything? How?
Possible steps:
1. factory reset from H-Boot, see if it boots up normally, then re-root.
2. Install PD15IMG from development section, look it up.
Good luck.
Click to expand...
Click to collapse
I've tried this, but it still hangs on boot screen. Thanks tho.
That sucks.
S.I. 77
zigg82 said:
First off let me start by saying I now know what i did wrong. Next is there anyway i can fix it?
I didn't backup anything and then managed to erase everything... I have CM 6 but as of now all i can get is the boot screen. I tried recovery but that won't work becasue there is no backup. also Before I erased everything i managed to turn s on so now i have no way to turn that off correct? Im basicly looking for a way to restore my phone but if it cant be done then i understand. Right now I am using a samsung vibrant with Nero v3 voodo and understand how to install custom roms now
Click to expand...
Click to collapse
Same issue here...I have nero v5 on my vibrant lol.
We should've just stayed with the vibrant...
Which recovery did you have installed and which h-boot
Did you try seeing if you could s-off through adb? Im not sure if this will work but Download the files you need to get s-off from ur computer and put it on ur SD card via a card reader or some sort, after you get the necessary files put the SD card back into ur phone. Hook it up to ur computer and maybe you can s-off through adb if you can get ur computer to recognize ur phone. Then IF it works, download a rom via computer to it SD card and boot into recovery and flash. Let me know what happens if it works or not
Sent from my HTC Glacier using XDA App
Should have taken my advice from this thread.
I just went thru the same thing and couldn't restore any of the backups it just kept getting stuck on the flash screen. I downloaded the ice glacier rom on to a spare sd card and flashed it thru hboot recovery and it looks like that did the trick.
hi guys if you still cant get your phones working try mobiletechvideos.com, they fixed my phone , my phone wouldn`t do anything .good reliable service, yes its in texas.
Although you didnt create any backups, is it possible that someone can create a backup of a fresh ROM and send that to you?
youshoe said:
Just take the SD card and put a new ROM on it. Then go to recovery, wipe data, wipe cache, wipe dalkik cache.
Then install zip from sd card and find it.
I like using Royal Panache 1.3.
I think it's stock Mobilicity ROM but no stock software from carrier. Good stuff.
MIUI and Cyanogenmod 7.1 are also good candidates.
I'm currently testing out ICS and you can test it out as well (but in your case, probably try a working one first =P) http://forum.xda-developers.com/showthread.php?t=1383629&page=1
Click to expand...
Click to collapse
I believe this is the oldest thread revive in the my touch 4g, Congrats good sir.
Sent from my HTC Glacier using xda premium
Nicgraner said:
I believe this is the oldest thread revive in the my touch 4g, Congrats good sir.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Wrong, he just randomly revived a thread that last post was made in July 2011.
Sent from MT4G-Glacier powered by HKM's GB2.3.X Enhancement Package v1.2
He revived quite a few of them, trying to market what I believe to be his product. Just look at his messages. Don't want to write the name of the product, since it appears he's scoring just for that.
I've reported his posts, but didn't see mod response yet.
Yet they always get me
Sent from MT4G-Glacier powered by HKM's GB2.3.X Enhancement Package v1.2
Jack_R1 said:
He revived quite a few of them, trying to market what I believe to be his product. Just look at his messages. Don't want to write the name of the product, since it appears he's scoring just for that.
I've reported his posts, but didn't see mod response yet.
Click to expand...
Click to collapse
Oh, as marketing for the app he talks about? I thought you meant ICS and was thinking well that just goes to feby's ICS thread..
Sent from my HTC Glacier using xda premium
FYI if it's older than a week..just let it go
Sorry in advance if im posting this in the wrong thread or if this has been posted before....
I have a Vibrant and i was updating using samsung kies. I never rooted my phone or did and customize things to it. i was going through the updating process when samsung kies said that the update failed and to disconncet my phone. so i disconnected my phone (the screen said download mode and do not turn off target). now when i try to turn my phone on i get a black screen with a phone triangle and computer logo. it will not go in to recovery. cau u please help... thanks
hopefully there is a way to fix this without using odin
odin and download mode there is a thread in development about in the bible i think about unbricking a vibrant, its very hard to brick a vibrant completely, I have done so before, but you can recover via odin.
Your phone is not fully bricked. and your better off than me half the time
How were you trying to boot into recovery if you've never rooted or customized? Your phone is not completely bricked if its turning on so I'm sure there's a fix.
Sent from my PG06100 using XDA Premium App
http://forum.cyanogenmod.com/topic/6998-howto-recover-from-a-soft-brick-on-your-vibrant/
that should have everything you need, you wont be able to get into recovery you need to get into download mode
Rooster85 said:
How were you trying to boot into recovery if you've never rooted or customized? Your phone is not completely bricked if its turning on so I'm sure there's a fix.
Sent from my PG06100 using XDA Premium App
Click to expand...
Click to collapse
You can boot into recovery without being rooted... i did it before when i wanted to do a hard reset.. plus the tmobile rep wanted me to try and boot into recovery to do a hard reset and clear all user data.
BossLady said:
Sorry in advance if im posting this in the wrong thread or if this has been posted before....
I have a Vibrant and i was updating using samsung kies. I never rooted my phone or did and customize things to it. i was going through the updating process when samsung kies said that the update failed and to disconncet my phone. so i disconnected my phone (the screen said download mode and do not turn off target). now when i try to turn my phone on i get a black screen with a phone triangle and computer logo. it will not go in to recovery. cau u please help... thanks
hopefully there is a way to fix this without using odin
Click to expand...
Click to collapse
remove the battery for five minutes, then reinsert it. You can now go back to the normal download mode. ANd I think you can even boot up normally. The former scenario happened to me so I am quite sure of that.
THANKS!!!!
big thanks to everyone i got my phone up and running again. i used odin (which was tricky) and followed the steps i saw in a youtube video. right before i was about to give up i called tmobile and ordered a replacement phone ....lol...tried one more time and it worked im SOOOO HAPPY this is a great community of people , couldnt have done it without u guys THANKS AGAIN!
I always brick my baby, and Odin is always there to save me
Hello everyone,
I'm hoping someone will be able to help me. I seem to have gotten in over my head. I have flashed various ROMs to my a500 over it's life without trouble. But about a month ago I tried to flash a new one and it didn't work. Came up with an error about partitions (I don't think it's important at this point). I was using TWRP recovery at that point. After the error, I could not get anything to work. My back up wouldn't recovery, I couldn't flash the last ROM I used, nothing worked.
I tried a few things to attempt to fix it, but I think I only made matters worse. I no longer have TWRP recovery installed. I think I have only the stock recovery. Tablet sits on acer screen when powered on. I haven't been able to install any update.zip packages. PC doesn't seem to see device when plugged in via USB. I can't put device into USB debugging as it doesn't boot so I'm unable to follow most guides I see.
Can anyone help me? I'll be happy to provide whatever information I can.
You can't get into Fastboot? You sure you have the correct drivers? What bootloader were you using and what kind of rom were you trying to load? Your gonna have to be more specific to garner more responses
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Vintage144 said:
You can't get into Fastboot? You sure you have the correct drivers? What bootloader were you using and what kind of rom were you trying to load? Your gonna have to be more specific to garner more responses
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
No, I can't seem to get into Fastboot. If it works, the tablet should display fastboot in the corner, right?
I have the Acer USB drivers installed. I believe they are correct.
I was using TWRP and attempting to install Jelly-Bean_4.1.2_CM10-FLEX_v6supercharged_Aroma(22-Nov-2012)
Also, thank you for responding. Sorry if I seem a bit noobish. All the ROMs I have used up until now just worked so I didn't think about too much.
I'm really missing my tab. Hopefully someone can help me out.
My TAB appears to be completely bricked as stated above. No boot. Just the Acer logo on the screen on power up.
I think what I did was format the entire thing. So that there is nothing on it. I have blackthund3r A500 Manager v1.02 installed and it displays "NO A500 Connected!" in the bottom corner. As I stated most guides tell you to turn USB Debugging on, but I can't do that since it doesn't boot, and really I don't think there is an OS installed on it at all.
Anyone have any suggestions, advice, ect?
Hi all,
I was running a jb rom, no problems. Then it bricked.
So Ive rolled back to 3.0.1 everything went well.
I installed Iconaroot apk and ran it ok and achieved root.
I then started to download a rom and the tablet went into sleep mode so I left it for 25mins and then tried to wake it and I found it had shutdown completely. when I tried to reboot it it loads ok I then get a message apk installer complete..I press ok and it then asks me for my tablet password.
I haven't set a password......is there a stock password ? ive tried 0000, 9999 etc etc
now I'm stuck because Ive tried rollingback again but it wont..fails every time.
Ive tried flash using blackthunders tool but it wont.
I'm running out of ideas
If anyone thinks they could help me I would appreciate it
Were u running a tegra owners rom originally? ?
There is no stock password.
Do this:
Complete a full hard reset.
This means doing a full wipe of Data and Cache.
If you have recovery still then use that. You must enable wipe of /data/media.
You can also wipe manually using the reset/volume button combo
Sent from my GT-I9300 using Tapatalk 4 Beta
[QUOTresetb_nz;45043210]Were u running a tegra owners rom originally? ?
There is no stock password.
Do this:
Complete a full hard reset.
This means doing a full wipe of Data and Cache.
If you have recovery still then use that. You must enable wipe of /data/media.
You can also wipe manually using the reset/volume button combo
Sent from my GT-I9300 using Tapatalk 4 Beta[/QUOTE]
Thanks for your reply
I was running ICS 4.0.4-RE-FLEXxx_Rev7.0 + CiVz_ezT20-revived OC Kernel
Full reset. Vol+ power + rotation switch. No change.
Still requesting unknown password.
No recovery.
twistedknickers said:
Thanks for your reply
Full reset. Vol+ power + rotation switch. No change.
Still requesting unknown password.
No recovery.
Click to expand...
Click to collapse
The tab should show :
Erasing Data...
Erasing Cache...
It should then vibrate and reboot
Does this happen??
Yes in white writing in the top left corner.
But it doesn't vibrate or reboot. The writing stays on the screen for 40 sec then it goes to android screen then on to ask for the password.
twistedknickers said:
Yes in white writing in the top left corner.
But it doesn't vibrate or reboot. The writing stays on the screen for 40 sec then it goes to android screen then on to ask for the password.
Click to expand...
Click to collapse
Well I thort I'd come across almost all issues that our tabs can throw at us, but this is a new one on me!
You do have an a500 ae?
Do u still have Skrilax_CZ unlocked bootloader showing on screen??
You could try a fastboot erase...
As far as I am aware the only way to get rid of the p/w screen is by erasing data and cache...
Oh u might be able to use apx mode to reflash the v8 bootloader again...use civs manual nvflash method...no harm in trying.
Good luck m8
dibb
Sent from my GT-I9300 using Tapatalk 4 Beta
Just had this happen...I ended up running babsector (do a search on here for it) and then flash your rom...it has to do with encryption I believe
teevah said:
Just had this happen...I ended up running babsector (do a search on here for it) and then flash your rom...it has to do with encryption I believe
Click to expand...
Click to collapse
I will give it a try. Thanks.
you need to get to recovery to use babsector.rar......i cant get to recovery.
gutted
You don't use recovery to run babsector. ..u run it same way as the bootloader flash...just hook yr tab to yr pc and run it from there...
it sounds like u need to do some reading especially the first 4 steps of civato's bootloader guide, there's also guides in my sig
Sent from my GT-I9300 using Tapatalk 4 Beta
I installed the HORSEMAGEDDON ROM and it worked - for the most part. But it kept giving me annoying errors about different apps that were attempting to update every time I turned it on. So I tried to restore my backup that I had made with CWM 6.0.2.8. However the backup apparently did not restore properly because it now boot loops back into CWM any time I try to start it. I get the errors:
E:Can't open cache/recovery/log
E:Can't open cache/recovery/log
E:Can't open cache/recovery/last_log
E:Can't open cache/recovery/last_log
So I tried to reflash HORSEMAGEDDON but it still loops back into the CWM recovery screen.
I have wiped everything according to the instructions on the HORSEMAGEDDON thread.
HELP!! This happened to me on another U8800-51 phone and I wound up hard bricking it trying to get back to stock.
Anybody???
Does anybody have any ideas on how I can fix this?
Did you wipe cache/dalvik cache?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
iheartsamsung said:
Did you wipe cache/dalvik cache?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yes. I did a wipe of data and factory reset as well.
What I would do is get an SD card with a custom rom on it and try installing it from recovery menu
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Obviously you have been having problems with that rom, so go with something different.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
iheartsamsung said:
Obviously you have been having problems with that rom, so go with something different.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Okay. Here is what I did step by step:
1. I was on Stock 2.2.2 Froyo and flashed HORSEMAGEDDON successfully. But I had some errors related to updates since it was such an old ROM the updates were all for much newer versions of the apps tied to 4.x.x.
2. I attempted to restore my backup made with CWM 6 to return to the stock. It said it completed successfully but when I rebooted it just looped into the recovery screen with the error messages posted in my first post.
3. So I tried to reflash HORSEMAGEDDON and it said it completed successfully. But it still bootloops into recovery.
4. I can access most of the features of the recovery. I can access the pink screen and swap recovery versions. I can access my SD card from my PC when I mount it from recovery.
5. Yes, I did do full wipes with each attempt to reflash.
The ROM was not the problem. It worked and worked well other than update issues for apps. It was only after attempting to restore to stock I ran into issues.
The problem appears to be something was corrupted when I tried to restore my backup, even though it said it completed successfully.
So if I try to flash yet another custom ROM, even if I could find one I trust given all of the version issues etc., I don't think it would act any differently. But if somebody can recommend one I am all ears. Keep in mind I have a -51 phone so it will have to be for that or the PRO.
Given that, how can I get back to stock? Am I the only person who has ever had this problem? I don't believe that is the case, so somebody must know how to fix it or can point me to a procedure to repair the internal memory.
Help!!
I'm new at xda so it's not letting me post an external link. Google "bootlooping" and the first one in list is from xda, just follow the instructions
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Thanks but.....
iheartsamsung said:
I'm new at xda so it's not letting me post an external link. Google "bootlooping" and the first one in list is from xda, just follow the instructions
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
None of the fixes on this link seem to apply to my situation.
When I said "bootloop" I may have misused the term. What happens is I power up, it goes to logo screen for about 10 seconds, shuts down and restarts to logo screen then goes into recovery after about 5 seconds. From other info that I have found it is due to a corrupt bootloader and I need to reflash the bootloader. Problem is, reflashing the bootloader i.e. CWM, does no good at all.
I am also hampered by lack of info specific to the -51 model. And I cannot find a copy of the stock ROM anywhere that is for the -51.
So essentially I am screwed. All of that said, I have found a new phone for $40.00 so all is not lost. It's a U8800 but not the -51 or PRO. I don't plan on customizing it, I'll just stick with stock. After trashing two phones even after following the advice to "BACKUP" I think enough is enough. Backing up did me no good whatsoever in both cases.
In my estimation, the culprit is CWM, or at least the versions I used.
If anybody has any advice I'm all ears.