[Q] stuck at password screen..after rollback to 3.0.1 - Acer Iconia A500

Hi all,
I was running a jb rom, no problems. Then it bricked.
So Ive rolled back to 3.0.1 everything went well.
I installed Iconaroot apk and ran it ok and achieved root.
I then started to download a rom and the tablet went into sleep mode so I left it for 25mins and then tried to wake it and I found it had shutdown completely. when I tried to reboot it it loads ok I then get a message apk installer complete..I press ok and it then asks me for my tablet password.
I haven't set a password......is there a stock password ? ive tried 0000, 9999 etc etc
now I'm stuck because Ive tried rollingback again but it wont..fails every time.
Ive tried flash using blackthunders tool but it wont.
I'm running out of ideas
If anyone thinks they could help me I would appreciate it

Were u running a tegra owners rom originally? ?
There is no stock password.
Do this:
Complete a full hard reset.
This means doing a full wipe of Data and Cache.
If you have recovery still then use that. You must enable wipe of /data/media.
You can also wipe manually using the reset/volume button combo
Sent from my GT-I9300 using Tapatalk 4 Beta

[QUOTresetb_nz;45043210]Were u running a tegra owners rom originally? ?
There is no stock password.
Do this:
Complete a full hard reset.
This means doing a full wipe of Data and Cache.
If you have recovery still then use that. You must enable wipe of /data/media.
You can also wipe manually using the reset/volume button combo
Sent from my GT-I9300 using Tapatalk 4 Beta[/QUOTE]
Thanks for your reply
I was running ICS 4.0.4-RE-FLEXxx_Rev7.0 + CiVz_ezT20-revived OC Kernel
Full reset. Vol+ power + rotation switch. No change.
Still requesting unknown password.
No recovery.

twistedknickers said:
Thanks for your reply
Full reset. Vol+ power + rotation switch. No change.
Still requesting unknown password.
No recovery.
Click to expand...
Click to collapse
The tab should show :
Erasing Data...
Erasing Cache...
It should then vibrate and reboot
Does this happen??

Yes in white writing in the top left corner.
But it doesn't vibrate or reboot. The writing stays on the screen for 40 sec then it goes to android screen then on to ask for the password.

twistedknickers said:
Yes in white writing in the top left corner.
But it doesn't vibrate or reboot. The writing stays on the screen for 40 sec then it goes to android screen then on to ask for the password.
Click to expand...
Click to collapse
Well I thort I'd come across almost all issues that our tabs can throw at us, but this is a new one on me!
You do have an a500 ae?
Do u still have Skrilax_CZ unlocked bootloader showing on screen??
You could try a fastboot erase...
As far as I am aware the only way to get rid of the p/w screen is by erasing data and cache...
Oh u might be able to use apx mode to reflash the v8 bootloader again...use civs manual nvflash method...no harm in trying.
Good luck m8
dibb
Sent from my GT-I9300 using Tapatalk 4 Beta

Just had this happen...I ended up running babsector (do a search on here for it) and then flash your rom...it has to do with encryption I believe

teevah said:
Just had this happen...I ended up running babsector (do a search on here for it) and then flash your rom...it has to do with encryption I believe
Click to expand...
Click to collapse
I will give it a try. Thanks.

you need to get to recovery to use babsector.rar......i cant get to recovery.
gutted

You don't use recovery to run babsector. ..u run it same way as the bootloader flash...just hook yr tab to yr pc and run it from there...
it sounds like u need to do some reading especially the first 4 steps of civato's bootloader guide, there's also guides in my sig
Sent from my GT-I9300 using Tapatalk 4 Beta

Related

reset tthe galaxy tab7 7 with Honeycomb?

hi
I have the galaxy tab 7 7 with Honeycomb ?
I need to hard reset it
how to do it ?
Settings > privacy> factory reset.
Done ;-)
Sent from my GT-P6800 using XDA Premium HD app
Hard reset is slightly different to factory reset. Wiping internal sdcard I believe, and possibly more
For SGS, type *2767*3855# into dialer
Not sure if work on our tab though.
Sent from my GT-P6810 using xda premium
hi again
help please .
I did hard reset my tab but it still problem to start up
I use the LCD Density Modder Pro v2.4.2
it mess up the my tab
I don't know how to fix this problem
I'm pretty sure a factory reset from settings doesn't touch /system. If you messed up something in there (such as LCD density) your best bet is to flash a stock ROM through Odin. There's a thread in the dev forum that has links to download all the stock firmwares and instructions on how to use Odin.
carlo67 said:
hi again
help please .
I did hard reset my tab but it still problem to start up
I use the LCD Density Modder Pro v2.4.2
it mess up the my tab
I don't know how to fix this problem
Click to expand...
Click to collapse
You should have told the exact problem before.....
Follow the post suggestion above and all will be fine if you follow the guide exactly.
Just make sure you flash P6800 firmware for P6800 & P6810 firmware for P6810.
If you can, factory reset and wipe cache etc in recovery first, then immediately boot into download mode and flash the stock firmware with Odin.
Sent from my GT-I9100 using xda premium
ok
I am new to Odin , I need lot of help.
which rom is good for galaxy tab 7.7/?
Read the stickies first
http://forum.xda-developers.com/showthread.php?t=1469635
And evil penguin excellent guide here;
http://forum.xda-developers.com/showthread.php?t=1587072
Sent from my GT-I9100 using xda premium
hi again;
can I do this on galaxy tab 7.7 https://www.youtube.com/watch?v=UDtxnH4lFuk&feature=fvst
I want to do reset [when it was out the bo]
It may or may not work.
My advice to you is to follow the proven guides using Odin 1.85.
Ensure Kies drivers are loaded, but kies not running with using Odin at the same time. They don't play well together.
You don't want to be yet another "plz help I'm bricked" post! Do you?
Remember;
Just hit "thanks" to any who try to help in XDA .... your welcome
Sent from my GT-I9100 using xda premium
I'm bricked" post! Do you? NO LOL
I haven't use the Odin before
and I can't get it in download mode because I am disabled guy I can't push buttons to get to in download mode
Is your tab rooted yet?
If yes;
And you don't have extended power menu or similar with download mode, recovery etc included, you can download reboot widget from Market (Google Play) and config indiviidual one touch widgets to homescreen for reboot, download, recovery etc. Should make life a little easier......
I wouldn't recommend trying the method shown (edit: in you video) as not for our device.
yes rooted
thank you this widget, I can't use widget for this problem because the LCD Density Modder Pro v2.4.2 broke my tablet.
I was very silly to use app
I tried to make bloody text big lol
So please explain what exact state of your tab? Aslo your model no. and current firmware?
What the tab can and can't do, also yourself?
Just a guess at this "blind" stage that maybe your buildprop file is messed up.
Is it possible to boot into recovery? (yes I know same buttons, but just asking anyway)
I don't know what is version of current firmware. I just got the tab last week. I got the Samsung Galaxy Tab 7.7" P6800 3G WiFi
I can do push buttons ok but I can't push 2 buttons all same time.
I am computers geek i have lot of experience with windows operating [3.1/11, windows 98/me/xp/Vista /7] and little bit of android
the tab can boot up [passed lock screen ok but it gives a error ]] I can't go pass this error.
yes can go into the recovery mode
question
where I can download firmware for Samsung Galaxy Tab 7.7" P6800 3G WiFi?
and
where I can download the Odin
I was wondering if possible Enter recovery mode and downloading mode from command line from pc?
if possible, it will be GREAT
carlo67 said:
I don't know what is version of current firmware. I just got the tab last week. I got the Samsung Galaxy Tab 7.7" P6800 3G WiFi
I can do push buttons ok but I can't push 2 buttons all same time.
I am computers geek i have lot of experience with windows operating [3.1/11, windows 98/me/xp/Vista /7] and little bit of android
the tab can boot up [passed lock screen ok but it gives a error ]] I can't go pass this error.
yes can go into the recovery mode
Click to expand...
Click to collapse
Suppose it doesn't matter if you just want your tab up and running and workiing. Had an idea of just pushing the stock build.prop file to your system directory, but you don't know what firmware version....
Since you can go into recovery, do you have a CWM Recovery and nandroid backup? If so, just flash that back. Wipe data, cahe, format system, advanced/dalvik immediately BEFORE
carlo67 said:
question
where I can download firmware for Samsung Galaxy Tab 7.7" P6800 3G WiFi?
and
where I can download the Odin
Click to expand...
Click to collapse
Read the forum stickies.............
http://forum.xda-developers.com/showthread.php?t=1469635
carlo67 said:
I was wondering if possible Enter recovery mode and downloading mode from command line from pc?
if possible, it will be GREAT
Click to expand...
Click to collapse
Yes, if you are familiar with ADB and have it setup already, will be easy
If not, there are guides on the internet for setup and use.
Power up phone;
In CMD type: adb devices
This will check device can connect to PC through ADB CMD - will return device serial no. if ok)
1. In CMD type: adb reboot recovery
2. Wipe & Flash nandroid backup
or
1. In CMD type: adb reboot download
2. Ensure SDamsung drivers are installed to PC
3. Ensure KIES is NOT running
4. Connect phone to PC and wait for driver initialisation
5. Run Odin
6. READ & Follow guide, link to I posted exactly and you should be ok
ok
unfortunately I don't have CWM Recovery and nandroid backup
I have the ADB. I will try it and I will let you
carlo67 said:
ok
unfortunately I don't have CWM Recovery and nandroid backup
I have the ADB. I will try it and I will let you
Click to expand...
Click to collapse
Since no CWM Recovery, try this before using Odin;
Power up phone;
In CMD type: adb devices
This will check device can connect to PC through ADB CMD - will return device serial no. if ok)
1. In CMD type: adb reboot recovery
2. In Stock Recovery - Factory reset, wipe cache and dalvik (dalvik if available in stock recovery, can't remember)
3. Reboot, may take a few minutes

AT&T Galaxy S4 Wont Boot into Recovery

I have a client's Atnt galaxy s4 that will not boot up normally and will not boot into recovery also.
when i try to boot into recovery i get the blue lettering in the top left and it just sits there i have let it sit for sometime like that with no change.
this is not my first go around with flashing android devices so please even give me Dev only options if that is what you think will fix it. i feel bad because he just bought this phone 2 weeks ago and cant use it. not sure what the other guy that tried to root it did and neither does he so i am shooting in the dark so any help would be great.
I have tried flashing the stock Odin package with no luck.
Also tried Kies Firmware upgrade with no luck
Most of the custom recovery for this phone from what i read are not flashed threw odin anymore, but if i am wrong please link me and i will give it a shot.
Dose anyone have any ideas someone told me to use the .PIT file and re-partition the device and reflash the stock odin package. but i have had no luck locating the .pit file for the I337 galaxy S4 could anyone grab it from there phone and upload it for me or any ideas on how i could possibly fix this issue.
Thanks in advance
Since you already tried ODIN, why don't you try KIES.
I tried that allrdy just forgot to add it to the list updated first post
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
C13v3r0n3 said:
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
ok i will have him give it a try
and yes it goes into downloading mode with no issues at all.
if the os isnt hosed just download goomanager and install the recovery then download a touchwiz rom that has an extended reboot menu, you can then just boot into recovery from the OS.
C13v3r0n3 said:
if the os isnt hosed just download goomanager and install the recovery then download a touchwiz rom that has an extended reboot menu, you can then just boot into recovery from the OS.
Click to expand...
Click to collapse
The OS wont boot that is why we are having such a issue cause we have to get into the recovery to fix the phone
thanks thou
If you can get into download mode and odin it should wipe everything, it should work. Maybr its hardware?
Sent from my GT-I9505 using xda app-developers app
In addition to letting go of the power button after the vibrate, here are a couple of other things that appear to have worked for other forum members. I didn't discover any of these fixes, I just did a lot of reading and saw where others have had similar problems and found ways to solve them. That is what makes the XDA community great:
Uppercuticus said:
I've had this happen to me several times while playing around with flashing. Basically (without fail in my experience), hold power+volume up+home as you'd normally do until you see the booting recovery message and let go. It will do one of two things - boot into recovery- or - restart and vibrate-. If it restarts and vibrates, immediately hold power+volume up+home until the booting recovery message pops up again and let go. It should then boot into recovery and you shouldn't have trouble in subsequent attempts.
It took me a while to figure this out and I actually thought I had permanently bricked my phone as the phone wouldn't boot and I couldn't get into recovery. Hope this helps.
Click to expand...
Click to collapse
RiNo808 said:
Those trying to boot into recovery mode, dl quick reboot from the play store. That's what I use and it works great.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Just flash a different custom recovery tar in odin. If ur using CWM, then flash TWRP, or vice versa.
C13v3r0n3 said:
If you can get into download mode and odin it should wipe everything, it should work. Maybr its hardware?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
After using ODIN, make sure to do a software (factory reset) to get rid of any data and settings that stayed behind. The firmware packages that we have for Odin, do not wipe everything on their own.
C13v3r0n3 said:
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Thanks - was having the same problem. At last somebody explains it properly. It worked.
(Why on earth is the script on the stock recovery screen so small. You need a microscope to read it. I am going to install CWM right away....)
Cheers LJ
S4 on veriozon only boots into download mood
Im having the same problem. I can ONLY get into download mood! Everytime I go and try to reboot all it does is vibrates. I was installing a rom before and it was installed fine then it says I lost my root and turned off. Now i can't turn my phone back on. I try to the NAND erase all but that does not work. Is my phone bricked? I have Verizon BTW. Could some body please help me ASAP!
Yankeetim92 said:
Im having the same problem. I can ONLY get into download mood! Everytime I go and try to reboot all it does is vibrates. I was installing a rom before and it was installed fine then it says I lost my root and turned off. Now i can't turn my phone back on. I try to the NAND erase all but that does not work. Is my phone bricked? I have Verizon BTW. Could some body please help me ASAP!
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=2316
any luck? im having the same problem after enabling the t-mobile aws bands on my i337. i could only get into odin mode, recovery boot sits there on end and i have no access to the phone settings. ive tried the odin with stock firmware but nothing.
xBeerdroiDx said:
http://forum.xda-developers.com/forumdisplay.php?f=2316
Click to expand...
Click to collapse
you are not playing fair sir...but a good one.
TheAxman said:
you are not playing fair sir...but a good one.
Click to expand...
Click to collapse
My unrooted s4 phone gets stuck with the blue colour legend Recovery booting with any mentioned method. I am unable to enter safe mode, any ideas? been surfing google for 6hrs with no proper answer. Thanks!!
C13v3r0n3 said:
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Thanx bro, This is solve my problem.
Having allmost the same problem with my S4...
http://forum.xda-developers.com/showthread.php?t=2498285
continuation of SGH_1337 will not boot into recovery
norml said:
Just flash a different custom recovery tar in odin. If ur using CWM, then flash TWRP, or vice versa.
Click to expand...
Click to collapse
here are all the details;
Rooted ATT Galaxy S4 MK2 with Busybox. all went well until I tried to flash and boot into recovery. Installed ClockworkMod Recovery, tried to reboot into recovery...permission error. Installed Team Win Recovery, same problem.
investigated... Superuser.apk for some reason is NOT present in app directory. hmm. checked for root, have root.
installed ClockworkMod Superuser from play store... asks to update superuser... fails with signature error.
There seems to be no way to flash this phone. I have the original backup I made with ClockworkMod but restore fails with signature error.
The phone works fine, has root but I am concerned I will not be able to update to 4.4 when it's available. I am also NOT able to flash any alternative ROM. frustrating.
I see there are relatives to this issue all over xda but as far as I can tell after a weekend of trying is there's NO WAY to boot into recovery with write permissions being allowed.

A500 seems to be at an impass.

I bought my very young daughter an a500 for christmas of 2011. She has a half little sister, whom her mother decided she should have to shar with...about a year old at the time. Well she managed to lock them out of the pattern lock...and airplane mode is on, so i cannot login the google account. I try to reboot to recovery and it says its corrupt. I dont recall what rom i installed, but i think its ICS. Anyone have ideas...adb doesnt seem to be enabled either.
press the reset button
jaw2floor said:
press the reset button
Click to expand...
Click to collapse
You must do a complete hard reset to force erase of userdata and cache, this will get you booting again. If you've previously unlocked the bootloader you may need to flash yr custom recovery again - then go in and do another full wipe to be sure..
Sent from my GT-I9300 using Tapatalk 4 Beta

[Q] Rooted, CM 10.1, clean rom, now stuck...need help!

Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.
Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2
mavverick said:
Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.
Click to expand...
Click to collapse
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot
KingKongDingDong said:
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot
Click to expand...
Click to collapse
Having the same issue so I figured I'd give these steps a shot. Followed them exactly and phone (AT&T S4, TWRP) would won't even reboot the first time into CleanROM. I'm stuck on the Samsung screen with the lock.
edit: I've noticed that now, when I reboot into TWRP, it prompts me for a password. Hitting cancel takes me to the regular home screen, but I had not been getting the password prompt before attempting to install CleanROM. A permissions issue, perhaps?
edit 2:
I've just spent some time trying a bunch of things with bits of good luck surrounded with tons of bad. Below are the steps I've taken to try to get CleanROM to boot (and reboot) without any issues. Hopefully they help figure out the issues we're having.
Wipe Cache
Wipe Dalvik
Wipe /system
Flash CleanROM
Reboot
---- Failed
Reboot into Recovery
Prompted for password, hit cancel
Fix permissions
---- Failed
Reboot to recovery
Prompted for password, hit cancel
Format data (type yes)
Reboot
---- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Powered off and then back on (not using reboot)
---- Failed
Reboot to Recovery
No longer prompted for password
Factory Reset
Attempt to Fix Permissions: failed
Restore default settings
Reboot system
---- Failed
Reboot to Recovery
Prompted for Password, hit cancel
Format Data (type yes)
Reboot System
--- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Reboot (using reboot, not power off / on)
---- Failed
Reboot to Recovery
Prompted for password, hit cancel
Factory Reset: failed
Restore Default settings
Prompted for password, hit cancel
Factory Reset: failed
* Internal Storage showing 0MB (as if it's not reading it correctly)
Fix Permissions
Prompted for password, hit cancel
Nothing has changed, my phone is currently chilling in TWRP
MJHawaii said:
Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
cuffed zhesea
Cataligh said:
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.
Hey. Thanks for the feedback in this thread. I flashed factory through Odin, and everything is working fine. I then factory reset my phone through factory recovery. I'm back to standard touchwiz with all the bloat lol.
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Appreciate all the help people!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Your best bet is do what "cataligh" mentioned... flash back to stock via odin...
Sent from my SAMSUNG-SGH-I337 using xda premium
When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.
TheAxman said:
When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.
Click to expand...
Click to collapse
Yeah, absolutely! I always backed up and flashed roms from my external SD.
mavverick said:
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Click to expand...
Click to collapse
waiting is for simpletons. get aokp and transcend...
jaboles said:
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.
Click to expand...
Click to collapse
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Wise words. Took your advice, installed Windows with boot camp, and got back to stock via odin.
I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.
TheAxman said:
I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.
Click to expand...
Click to collapse
My original question was for the AT&T version of the Galaxy S4 - i337.
xBeerdroiDx said:
waiting is for simpletons. get aokp and transcend...
Click to expand...
Click to collapse
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.
mavverick said:
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.
Click to expand...
Click to collapse
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium
doktor buknasty said:
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yeah, data was enabled - and I was using ATT LTE apn settings that I found on these forums. I made sure to use the right now. Plus, when I rebooted my phone, it got stuck on the Samsung lock screen again...
Juuuuust ODINed back to factory right now for the second time :crying:
Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium
doktor buknasty said:
Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yes, those were the exact settings that I used. Is it possible that I could have a defective phone or sim card?
Right now, I am on factory touchwiz with root enabled, and my phone is working perfectly fine. I can reboot, use LTE, everything. The problem starts when I load any CM or AOKP rom...

[Q] Can't Boot to Manual Recovery

Hi guys. Since flashing Beans version of KitKat for my Note 3 my phone will no longer boot to manual recovery (volume up, home, power). The phone goes into a boot loop. The phone does reboot normally after the battery is pulled.
Any ideas on what's causing this and how to fix it? Any and all help is appreciated.
Thanks.
sugelover said:
Hi guys. Since flashing Beans version of KitKat for my Note 3 my phone will no longer boot to manual recovery (volume up, home, power). The phone goes into a boot loop. The phone does reboot normally after the battery is pulled.
Any ideas on what's causing this and how to fix it? Any and all help is appreciated.
Thanks.
Click to expand...
Click to collapse
Are you just trying to access safestrap ?
Bobby_z said:
Are you just trying to access safestrap ?
Click to expand...
Click to collapse
No safestrap works fine. I'm referring to the manual recovery mode of the phone. Volume up - Home - Power when the phone is powered off.
If I attempt to reboot to the stock recovery menu (either via the above mentioned method or even after installing the option with Wanam) I get a boot loop.
Never had that issue I did notice when running it I couldn't use the emulator script to enter recovery but was able to power off and manually enter it. Might try to re flash and wipe I don't know if that will fix your issue or not.
Sent from my SM-N900V using XDA Free mobile app
Bobby_z said:
Never had that issue I did notice when running it I couldn't use the emulator script to enter recovery but was able to power off and manually enter it. Might try to re flash and wipe I don't know if that will fix your issue or not.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
I've tried reflashing and wiping already. No luck.
Not sure then best advise I could give you is stay on 4.3 for a while I didn't really think 4.4 was that great plus not a lot of rom option's just yet.
Sent from my SM-N900V using XDA Free mobile app

Categories

Resources