Can`t flash my lg optimus l7 - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Every time when i try to flash my phone the program crash

What are you trying to flash? If you're flashing the v10k prerooted rom and the phone finished rebooting,this error is perfectly normal.

My phone doesn`t reboot it`s now only standing on emergency mod

same problem
UNOSlv said:
My phone doesn`t reboot it`s now only standing on emergency mod
Click to expand...
Click to collapse
I have the same problem, trying to find the solution for a whole week.

Fix
UNOSlv said:
Every time when i try to flash my phone the program crash
Click to expand...
Click to collapse
i remember i had the same problem, now once the root is finished the program is supposed to crash but you will see "Finished" in the log.
make sure your phone is connected in Pc program (if it doesnt work try in charge only mode) mode with usb debugging turned on... your phone should restart 2 times... and when you are prompted to "reset" leave the password and username blank and tap "reset"

Try flash with other non root ROM get back to your stock firmware first and redo again to be safe.
or maybe u can flash CM10 nightly ? its clean and fast :good:

Related

Bricked phone ?

Hi,
I tried to upgrade from v2.1 to new Android 2.3.5 Gingerbread For LG Optimus GT540 and I followed instructions exactly, but I am stuck at number 8, I did this:
8- Now click “Launch software update”, DO NOT USE THE PC TO THE PROCESS IS COMPLETE. THE PHONE WILL REBOOT WHEN FINISHED THE PROCESS IN KDZ. (The process takes about 15 minutes in KDZ).
and about 2 minutes text log writes and stopped, I am now waiting more then 40 minutes my phone didn't reboot. On display is still written download mode, what should I do now ?
In kdz is written:
3GQCT: wParam = 205. IParam = 36
p.s.
I disconnected phone from usb and pull out battery and now I cannot turn on phone, I tried to push vol down + power for 5 sec.
Any idea what should I do now? I hope I didn't brick my phone
What programs are you using?
What are you using to update your phone and have you tried taking out your SIM, SD card and battery then turned it on with the USB cable?
I used KDZ updater and tried to install CyanogenMod7 (2.3.5) @ GT540 Swiftdroid2 RC3 by Mur4ik. if that is what you ask ?
I removed sim card and battery also, then tried to turn it on while plugged in to computer usb but no response from phone, I can't turn it on
p.s. I am using win 7 64 bit OS
gorantz said:
I used KDZ updater and tried to install CyanogenMod7 (2.3.5) @ GT540 Swiftdroid2 RC3 by Mur4ik. if that is what you ask ?
I removed sim card and battery also, then tried to turn it on while plugged in to computer usb but no response from phone, I can't turn it on
p.s. I am using win 7 64 bit OS
Click to expand...
Click to collapse
If you can't get into download mode, then it's game over I'm afraid. What you will need to do is return the phone back to where you bought it. This happened to me some time ago. But the Carphone Warehouse were happy to fix it (even though I had voided the warranty but don't tell them that ). Don't say that you tried to mod the phone, say something like 'I installed LG's PC Suite and it said my device had a software update. I went along with it, but it gave me an error half way through. Now my phone won't turn on at all' It might just work!
I had the same problem when modding with kdz.
completely bricked my phone, but was able to fix by putting kdz into emergency mode instead of diag and updating with a fastboot stock rom,
it would stop after 2 minutes and give me and error but it managed to get fastboot onto my phone,
(camera + power)
then just flashed the fastboot method with adb and everything was fine,
my problem was something to do with lg modem drivers i believe,
I read a thread that said to disable the lg virtual modem. (didnt
work for me)
pretty noob myself
but the above method worked for me,
not sure if this can do anymore damage to the phone
have a look at this is u get it into emegancy mode.
On the kdz updater instead of 3GQCT put into emergancy
http://www.youtube.com/watch?v=fDmU9RSIiDA
If you have tried flashing with Cm7 you might be lucky,
try holding camera button and powering on the phone, a black screen should come up thats fastboot.
if that comes up u should be able to just reflash following mur4iks instruction
if not try what i said in my last post and reflsh with phone type 3QGCT and PhoneMode EMERGENCY
again only going of how i fixed my bricked phone
ZxWelshyxz said:
If you have tried flashing with Cm7 you might be lucky,
try holding camera button and powering on the phone, a black screen should come up thats fastboot.
if that comes up u should be able to just reflash following mur4iks instruction
if not try what i said in my last post and reflsh with phone type 3QGCT and PhoneMode EMERGENCY
again only going of how i fixed my bricked phone
Click to expand...
Click to collapse
He was trying to flash a fastboot rom (to install CM7) but bricked his device in the process. So he can't flash CM7-.-
Yeah I know that but I mean when I got the error he has, I flashed with a stock 2.1 fastboot rom With Diag changed to EMERGENCY and was able to get on to fastboot mode (camera+power), I got the error again as i was flashing but the phone would load fastboot and not start up
If he can get lucky and get into fastboot like i did, a simple:
fastboot -w
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
should fix his problem or did i just get lucky?
sorry if im confusing thinks here, but this is how i fixed mine. which was also dead and not turning on
Sent from my GT540 using XDA App
@ZxWelshyxz
I am total neewbie, can you write to me some kind of tut, like press that then do that etc
gorantz said:
@ZxWelshyxz
I am total neewbie, can you write to me some kind of tut, like press that then do that etc
Click to expand...
Click to collapse
Well like i told you im a noob at this myself (Android phone flashing atleast)
I suppose it would be good to see if you got fastboot??
Power on the phone while holding camera button (hold the camera button until the screen goes black) if you can get fastboot you can just follow the fastboot flash instructions after fastboot -w
if not on kdz in the top right were it says DIAG, Change this to CS_EMERGENCY,Click Launch update and flash again with a stock fastboot rom
after THIS see if the phone loads or boot loops(had this once too) or loads fastboot
Il try look to find the thread i read on another forum for troubleshooting kdz it helped me alot
EDIT: http://android.modaco.com/topic/321895-faqgt540-reference-thread/ try some of the troubleshooting tips at the bottom of the O.P
I basicly aimed to get fastboot working so make sure your flashing with a stock FASTBOOT! rom
again im new to this im just saying what got my phone back to life
my fone stuck in download mood what can i do?
corecrack said:
my fone stuck in download mood what can i do?
Click to expand...
Click to collapse
Pull out the battery and turn on the phone again (if you have knocked the phone when turning on, or flash a KDZ (when connected to PC)
@gorantz
Can i advise to follow step by step tutorial pin pointed by lavero.burgos, am a total neewbie like u man,but now using latest CM7 by Mur4ik and waiting for new release from devs
Sent from my GT540 using XDA App
thanks, but my phone is now at service when I get it back maybe I'll try....but maybe
gorantz said:
thanks, but my phone is now at service when I get it back maybe I'll try....but maybe
Click to expand...
Click to collapse
I bricked my phone and I tried it again after getting it back from lg
I'm new here and to having a Smartphone, I've just been given an LG Android GT540 which is at version 1.6. The LG site tells me I can upgrade to 2 something or other, sorry can't remember the exact number and gives instructions on how to do the upgrade, but I'm a bit on the cautious side as I don't want to brick it, not this early on in owning my first Smartphone.
I'll be reading a lot of the posts here to try and find out as much as I can before I attempt to do this.
Well don't worry if it's official update. But if you some how brick your phone just tell lg the update bricked your phone and we are talking about unofficial updates
Sent from my GT540 using XDA App
gorantz said:
thanks, but my phone is now at service when I get it back maybe I'll try....but maybe
Click to expand...
Click to collapse
Dont hesitate to ask for help man its worth upgrading.
Sent from my GT540 using XDA App
I've got phone today from service (not official LG service), repairman just manage to wake up phone so I can turn it On, but when I turn it I get black screen with message on it ''download mode''. Now computer recognize phone when I plug it, and I tried to update or flash it with kdz updater but have no luck
I launch kdz in emergency mode, load rom with updater, press launch button, and process started, (get messages unpacking software etc.) but after 3-4 minutes I notice that computer is blocked I couldn't do anything with mouse pointer, and I waited 15 minutes but computer is still blocked, even time on computer is stopped. I tried this procedure few times, every time it is same. Also tried to disable lg virtual modem in device manager. Any idea what I could do ?
p.s. repairman in service told me that he tried it to flash it with riff box, process started but after few minutes if stopped and blocked his riff box

[Q] <SOLVED>Completely bricked korean ver F320s G2

Hey guys , my not so smart friend tryed to be smart and tryed to flash custom rom WITHOUT rooting, and WITHOUT any recovery :highfive:. Long story short the phone is bricked completely. Mainly it stuck in LG logo for a long time and sometimes it actually load the system but crashes after a few secs, again, to LG logo.
Is there any way to root the phone without going into the system( usb debugging etc)?
p.s.
tryed to do factory reset and the result as above.
Thank you in advance guys!
After 7 hours I found a solution to this insane situation. I never had to recover such a dead phone. No root, no recovery , no backup, no rom on the device. Any way Im proud of myself
If someone has the same problem I might be able to help!
Seven Winds said:
Hey guys , my not so smart friend tryed to be smart and tryed to flash custom rom WITHOUT rooting, and WITHOUT any recovery :highfive:. Long story short the phone is bricked completely. Mainly it stuck in LG logo for a long time and sometimes it actually load the system but crashes after a few secs, again, to LG logo.
Is there any way to root the phone without going into the system( usb debugging etc)?
p.s.
tryed to do factory reset and the result as above.
Thank you in advance guys!
Click to expand...
Click to collapse
....how did he flash it without recovery? what a dummy...Its bricked... he deserve a $500 brick
U can try to use LG flash tool to fix but I doubt its gonna work, but hey suprise me.
G1_enthusiast said:
....how did he flash it without recovery? what a dummy...Its bricked... he deserve a $500 brick
U can try to use LG flash tool to fix but I doubt its gonna work, but hey suprise me.
Click to expand...
Click to collapse
Yeah, I told him to wait for my help (not that im a pro,but i had some experience rooting and installing roms on htc sensation and now on my galaxy 4)..
Any way, as we speak I am downloading stock rom and will try to use the flash tool but Im really doubtfull It will work as well.
Thank you for the answer!
Seven Winds said:
Yeah, I told him to wait for my help (not that im a pro,but i had some experience rooting and installing roms on htc sensation and now on my galaxy 4)..
Any way, as we speak I am downloading stock rom and will try to use the flash tool but Im really doubtfull It will work as well.
Thank you for the answer!
Click to expand...
Click to collapse
does the computer recognize the phone at all?
G1_enthusiast said:
does the computer recognize the phone at all?
Click to expand...
Click to collapse
After installing the driver, when the phone is powered off, no. When the phone turn on, no. When the operating system turns on, I dont know, not enough time (phone restarts after a few secs).
I do hear the indication sound from windows that something is connected but nothing turns up..
Seven Winds said:
After installing the driver, when the phone is powered off, no. When the phone turn on, no. When the operating system turns on, I dont know, not enough time (phone restarts after a few secs).
I do hear the indication sound from windows that something is connected but nothing turns up..
Click to expand...
Click to collapse
lol I think its good as bricked.
G1_enthusiast said:
lol I think its good as bricked.
Click to expand...
Click to collapse
I did it! wow, took 7 hours ! :victory:
Just so you know how :
1. Need to be in fastboot mode
2.Do like in this thread with the CMDhttp://forum.xda-developers.com/showthread.php?t=2477595
3. Then basicly follow the steps here http://choimobile.vn/threads/huong-dan-cuu-soft-brick-lg-g2-f320s-l-k.12932.html
4. Whats important though I think is turn off your computers internet connection, dont know why, but it will fail otherwise.
Step By step
After you collect those DLL & TOT files, here's step by step :
1. Disconnect any internet connection
2. Set the computer time before Juli 15th, 2012 ( I set March 1st, 2012)
3. Double click LG Flashtool. Username, password, and Registration key are on the link #1 post http://forum.xda-developers.com/showthread.php?t=2396048
4. Insert DLL file in DLL column. Browse to where you put the DLL file.
5. Insert TOT file in Software column. Browse to where you put the TOT file.
6. Click OK
7. Click the GEAR icon, set only port #1 that ticked. Other ports are UNTICKED. Click OK.
8. Press & hold volume UP , while connecting the USB cable to your computer (set to DOWNLOAD MODE). Until the phone shows "DOWNLOAD MODE" on the center of the screen.
9. Open System Properties. Device manager ->Set COM port for LG Handset using port 41.
10. Click Arrow Right in LG Flashtool, disconnect USB cable for 5 seconds. Reconnect USB cable.
11. The FLASH process in progress, wait for 600 seconds and shows green background say "PASS".(In my case at around 86% The phone already worked, the flashtool still did his thing and failed at 90 something percent.Doesnt metter because phone works)
12. Disconnect USB cable and close the LG Flashtool application.
wow props to ya...how did u get the IMEI back?
Why kids messin with phones when they dont know what they doin .. aaahhh

Need Help!! my sm-n9005 can't access to recovery and bootloop with 2 vibrations

Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
rodyrach said:
Hi all!
im new here and i need help!
my galxy note 3 LTE don't boot and i can't enter to recovery mode.
First time that i have this problem i solved it by a new flash stock rom and nand erase all.
But this time it dont work.
the phone just vibrate one time and display the logo samsung galaxy note 3 sm-n9005 and the screen turn back black with a second vibration and do the same again and again...
I can enter to download.
Need your help please and sorry my english is so bad.
thanks to all.
Click to expand...
Click to collapse
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
devilsdouble said:
You mean you have done a battery pull and then you still can't enter download mode by pressing that three button combos?
Click to expand...
Click to collapse
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
rodyrach said:
i do enter download mode but not in recovery mode to perform a wipe data.
i can flash stock rom and odin say pass in green but the phone reboot at samsung galaxy note 3 sm-n9005 with recovery booting in blue on top of screen
Click to expand...
Click to collapse
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
devilsdouble said:
I don't understand the part I bold. Is it bootloop still, even after flashing a stock ROM via Odin successfully? That's weird!
I think you can wipe your phone via ADB, not sure though.
Click to expand...
Click to collapse
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
rodyrach said:
Yes exactly!
Even after flash stock rom via odin it still bootloop just at start up.
What is ADB? Please help me to do that.
Click to expand...
Click to collapse
hi, your problems are resolved?
devilsdouble said:
I am very short on time, thus just giving you the link, however if you read thoroughly its pretty easy
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
rodyrach said:
Not yet! Im stuck at the job.
And Thanks devilsdouble. I try this as soon as i have a moment and tell you how it goes.
Thanks again for your help.
Click to expand...
Click to collapse
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
cryostasis25 said:
Happened to me but on the note 1 i flashed the pit files also for the phone using pdin and it fixed my problem. Maybe if all else fails try flasing stock rom with pit files using odin.
Click to expand...
Click to collapse
Hi i have already use pit file with stock rom via odin. same result. bootloop at the logo.
rodyrach said:
before I start any thing
I understand the need to enable usb debugging in settings before using ADB.
is it important? because my phone does not start so I can access the settings to enable usb debugging
Click to expand...
Click to collapse
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
devilsdouble said:
Yes mate, I think its needed to be enabled. Still you can try and see if your phone shows up on ADB or not, there will be a six or eight digit code appearing on the ADB screen if the phone is successfully connected, but I guess you know that already by reading that topic.
You can ask ADB related queries in that topic too, I guess.
Do update here whatever happens.
Click to expand...
Click to collapse
My phone dont show up on ADB.
rodyrach said:
My phone dont show up on ADB.
Click to expand...
Click to collapse
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
devilsdouble said:
So you type adb device, and the device isn't showing up? Ah, that's normal I guess, knowing you can't turn on USB Debugging. I am out of help sadly. You need to get in touch with more advanced users now. I don't know if it's possible to turn on a phone's USB debugging mode without booting into the OS. You could ask in that topic though.
Click to expand...
Click to collapse
My problem not solved
rodyrach said:
My problem not solved
Click to expand...
Click to collapse
Flash official lollipop poland done! still bootloop at "samsung galaxy note 3 sm-n9005".
can't access to recovery mode but download mode still working!
before to sleep i left the charger connected to the phone still bootloop until the morning and BANG i waked up saw lollipop samsung logo and blue led!
screen stucked at lollipop samsung logo!
i turned off the phone left in charge ( normal charge with animation in green battery, thing that did not before because as soon as I connected the charger to the phone it tried to boot and reboot all time after e few seconds with 2 vibrations) and gone to work.
go back home battery charged at 100%, tried to boot in recovery mode and it working!
i performed a wipe data factory reset and wipe cache partition and BANG my note 3 booted normally.
done a few hours and it works very well.
Thanks to all for your supports.
Really weird i don't understand whats happened during the night.
But im so glad .

Hard brick SM-N910F

Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Update - I found out the phone was still under warranty so I sent it away to be repaired. It was repaired and I now have a working phone !
ylmcc said:
Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Click to expand...
Click to collapse
What have you done to reach that state? I know that you're desperate but you must give some details if you want help.
It was given to me with 5.1.1 installed however it failed mid process and while on 5.1.1 it kept freezing and acting weird such as boot with weird errors and they only appeared after it was updated, I decided to root it with odin and it never fully rebooted after the was root applied. I finally got it to boot to stock and rooted and decided to install a custom recovery which was twrp while selecting the recovery it said if its a wrong location it will brick, with this in mind I checked the model with the one on their site and it seemed to make sense and applied it.
This caused the original problem which made it boot straight to download mode with it saying it could not normal boot. I then googled the problem and one said the pit was corrupted and downloaded the correct file. I then applied this through odin with stock firmware and it refuse to flash. At the time I was thinking a restart on the device would help, but it resulted in not booting at all and not being detected....
It does not light up or make a vibration when its connected or powered on if there is any solution it would be great...
Can anyone help or point in the right direction?
Hard brick SM-910F
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
[email protected] said:
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
Click to expand...
Click to collapse
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
ylmcc said:
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
Click to expand...
Click to collapse
qualcomm emergency download mode. is it called.
Tunestwo said:
qualcomm emergency download mode. is it called.
Click to expand...
Click to collapse
Anything I can do to get some sort of os on the phone now?
in this case via Odin tries to reinstall the tar of the official rom N910F .
ylmcc said:
Anything I can do to get some sort of os on the phone now?
Click to expand...
Click to collapse
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
mangui said:
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
Click to expand...
Click to collapse
The phone does not display or respond when the keys are pressed, just a black screen..
Battlehero said:
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
Click to expand...
Click to collapse
Chrome detected a virus in the rar
ylmcc said:
The phone does not display or respond when the keys are pressed, just a black screen..
Chrome detected a virus in the rar
Click to expand...
Click to collapse
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Battlehero said:
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Click to expand...
Click to collapse
I'll download it again but windows defender detected it too.
Edit - Yep did it again, here is a link to a photo of what I get but from virus total I don't get why its being flagged perhaps false positive ??
Update
Found a jtag service that is cheap will update once I get it back...
sm-n910f
I got a brick note 4 and i want to fix it
I search over the internet for this solution and found a method
Sd card repair boot but it did not work at all
I need help
thank you in advance

S5 cant turn off reactivation lock

Hello
I was searching and trying a lot but didnt found any solution.
My s5 is not turning on so i cant turn off reactivation lock. I tried hard reset, didnt help. Tried root but r/l is blocking odin.
Please help
Dobryskun said:
My s5 is not turning on so i cant turn off reactivation lock. I tried hard reset, didnt help.
Click to expand...
Click to collapse
Which of S5s? (Product name string on display in Odin mode)
G900F
Dobryskun said:
G900F
Click to expand...
Click to collapse
I'd do the next:
1. Get an OTG cable and a USB stick. Format the stick to FAT32 and throw any .apk file on it.
2. Download some 4.4.2, say, G900FXXU1ANCE and flash it with Odin.
3. Reboot to recovery and perform a factory reset.
4. Reboot to system and enter Setup Wizard.
5. Connect the OTG cable with USB stick attached. When the phone detects the stick you will see a pop-up window of file explorer.
6. Navigate to your .apk file (from p.1) and tap on it. You don't really need to install it, you only need a security request after your tap.
7. Tap "settings" and voila, you are in the security settings menu now.
8. Navigate to "reactivation lock" and untick it. You'll be asked to enter your Samsung account credentials or to register a new account.
9. Register a new account, log in to it an you'll be able to untick Reactivation Lock and disable it completely.
The trick will work on early 4.4.2 only.
bbsc said:
I'd do the next:
1. Get an OTG cable and a USB stick. Format the stick to FAT32 and throw any .apk file on it.
2. Download some 4.4.2, say, G900FXXU1ANCE and flash it with Odin.
3. Reboot to recovery and perform a factory reset.
4. Reboot to system and enter Setup Wizard.
5. Connect the OTG cable with USB stick attached. When the phone detects the stick you will see a pop-up window of file explorer.
6. Navigate to your .apk file (from p.1) and tap on it. You don't really need to install it, you only need a security request after your tap.
7. Tap "settings" and voila, you are in the security settings menu now.
8. Navigate to "reactivation lock" and untick it. You'll be asked to enter your Samsung account credentials or to register a new account.
9. Register a new account, log in to it an you'll be able to untick Reactivation Lock and disable it completely.
The trick will work on early 4.4.2 only.
Click to expand...
Click to collapse
Thank you!
I think i had a lollipop on it so it will probably not work but ill try anyway since there is no other way.
I know my password for samsung account, i just cant turn on the phone.
I will get otg cable monday so i will post how it went with your solution.
Btw by usb stick you mean pendrive?
Dobryskun said:
Thank you!
I think i had a lollipop on it so it will probably not work but ill try anyway since there is no other way.
I know my password for samsung account, i just cant turn on the phone.
I will get otg cable monday so i will post how it went with your solution.
Btw by usb stick you mean pendrive?
Click to expand...
Click to collapse
It will work in any case.
There are other ways too.
Yes, a pendrive or something like a USB cardreader with a card, just to connect it as external OTG storage.
You are saying you cannot turn the phone on. What does it mean? What you do and what you see?
bbsc said:
It will work in any case.
There are other ways too.
Yes, a pendrive or something like a USB cardreader with a card, just to connect it as external OTG storage.
You are saying you cannot turn the phone on. What does it mean? What you do and what you see?
Click to expand...
Click to collapse
When i push power button it shows samsung logo and stays like that. Sometimes it restarts over and over again, sometimes it freeze on samsung logo.
Tell me more about other ways please.
Dobryskun said:
When i push power button it shows samsung logo and stays like that. Sometimes it restarts over and over again, sometimes it freeze on samsung logo.
Tell me more about other ways please.
Click to expand...
Click to collapse
1. You should know that the first boot after a factory reset takes a long time, say, up to 15 min. I'd suggest waiting 20 min. and then make a conclusion.
2. If your phone freezes and restarts after a factory reset, it's a good idea to flash a stock ROM. Reactivation lock will not block flashing a stock ROM via Odin.
3. If your phone still behaves abnormally, it's more likely a hw memory problem (rather often for G900), not a reactivation lock problem. Reactivation lock would not prevent the phone from booting.
4. If you still interested in "other methods", have a look at this my thread. It's for SM-G900V and the files will not work for SM-G900F, but there are another files and the main idea will work.
But I'd like to say it again: seems, it's not your case.
bbsc said:
1. You should know that the first boot after a factory reset takes a long time, say, up to 15 min. I'd suggest waiting 20 min. and then make a conclusion.
2. If your phone freezes and restarts after a factory reset, it's a good idea to flash a stock ROM. Reactivation lock will not block flashing a stock ROM via Odin.
3. If your phone still behaves abnormally, it's more likely a hw memory problem (rather often for G900), not a reactivation lock problem. Reactivation lock would not prevent the phone from booting.
4. If you still interested in "other methods", have a look at this my thread. It's for SM-G900V and the files will not work for SM-G900F, but there are another files and the main idea will work.
But I'd like to say it again: seems, it's not your case.
Click to expand...
Click to collapse
1. I will try to wait longer time.
2. Where should i find stock ROM? My phone is in Telenor (Norway)
3. Beggining of the problem with my phone was that one day after turning phone on it came to samsung logo and start to scream ( wery loud noise ) and turned itself off. Since then it didnt pass trough samsung logo ever again. Then i started with factory resets and when it didnt help i tried to root it and put new ROM but all was blocked by R/L.
Dobryskun said:
Where should i find stock ROM? My phone is in Telenor (Norway)
Click to expand...
Click to collapse
https://updato.com/firmware-archive-select-model?q=sm-g900f&exact=1&r=TEN&v=&rpp=15
@bbsc
I have tried to put stock ROM and it didnt help. I was not sure which version should i use so i started with first one from the list. Odin says it was succesfull but phone is stopping now with recovery booting welcome page. It takes about one minute and the phone is off. I tried four versions of stock ROM and result is exactly the same.
Phone is not starting at all.
Should i try all versions of stock rom?
Dobryskun said:
@bbsc
I have tried to put stock ROM and it didnt help. I was not sure which version should i use so i started with first one from the list. Odin says it was succesfull but phone is stopping now with recovery booting welcome page. It takes about one minute and the phone is off. I tried four versions of stock ROM and result is exactly the same.
Phone is not starting at all.
Should i try all versions of stock rom?
Click to expand...
Click to collapse
Hi,
I don't want to make you afraid but I was facing very similar problem and nothing helped but replacement of phone's motherboard at Samsung service centre -> my eMMc memory got corrupted for some reason.
Hopefully it is not your case but after reading your symptoms I wouldn't be much optimistic.
Dobryskun said:
Should i try all versions of stock rom?
Click to expand...
Click to collapse
Any one is enough.
If you flashed a stock rom, performed a factory reset and the phone still restarts it is not a good sympthom.
I think, Many40 is right and it's time for a new motherboard.
There's nothing to be afraid of, it's just about $30 if DIY.
@Many40 @bbsc
Ok so i give up. I realy like this phone so i will give it to service for motherboard replacement since i have no idea how to do it by myself.
Thank you guys for help!
Cheers!
Deleted
deleted
bbsc said:
Solution of what? Replacing the motherboard?
Or you simply found a stolen z3x? No need of it to disable RL on S5.
Click to expand...
Click to collapse
Solution to turn off the activation lock. No need for hostility, just trying to help here.
deleted
Ok I will remove the link and the post. Thanks for the input.

Categories

Resources