After install of CM9, my Droid Pro will not boot. I have wipe data, remove battery, sim card and sd card. I have even tried hold the X button while powering up, "NOTHING". Does anyone have a solution to how I can get phone to boot. Upgrade isn't until August and I like this phone.
How to boatloader
CountYoungWorm said:
After install of CM9, my Droid Pro will not boot. I have wipe data, remove battery, sim card and sd card. I have even tried hold the X button while powering up, "NOTHING". Does anyone have a solution to how I can get phone to boot. Upgrade isn't until August and I like this phone.
Click to expand...
Click to collapse
I have Motorola droid pro, i have a problem, plz help me to solve it,
I was rooting flash and seting up new softwear with RSD but in the centre of installing softwear my pc went trun off and my cell phone now not working only main logo of Moto Droid pro comes again and again, I want that there comes boatloader screen now that's why i detect phone again and install software plz help me . i m very upset.
eng.
Hi
I have the same problem
Cell phone now not working only main logo of Moto Droid pro comes again and again
Related
I just got my Mini S and it is a BRICK! All it does is go straight to bootloader upon booting... So i can't use the updater that's available.
Even if i do a hard reset, it goes straight back to bootloader. Somebody help, please!
where did you get it from?
was it a brick when you got it? if so compain and send it back
or have you done something to make it a brick?
I received it as such, but would prefer to fix it myself- its just different than other smartphones in that you can't load a rom image on it when it is in bootloader.
anyone have suggestions?
somehow get a Rom on to a Mini SD card and restore it thou the boot loader
if you know someone with a Vario then could put a mini SD card in it and back up the rom
Hello timothyadam,
yesterday my "mini s" was also dead (no booting os!), but:
when you are in the screen with the three colors (press Voice and camera Button and then reset) and you have connect the mini s via usb cable (in the left down corner you must see USB) then you can click the exe (imate or qtek prodigy file) and this work.
Regards
I've tried that, but since the K-Jam rom update only works when the device isn't in bootloader, i can't get it to recognize the device...
alright.. i made a similar post to this before and i came across the wiki...
well i can't view what my SPL or my IPL because as soon as i turn the device on, all that shows is the boot loader screen and displays serial on the top with 0.16-0.90 in red characters on the bottom (I'm not sure what those are)...
here are the only details that i know about my phone:
I DON'T have hard SPL
My Original ROM i was using before was an htc windows mobile 5 rom
The reason that my phone is bricked right now is because the usb cable disconnected in the middle of the flash
I'm using Windows Vista for flashing
Computer won't recognize the phone when on usb
My phone (qtek 9600) can't load the operating system
*EDIT*
THE PHONE IS STUCK ON BOOTLOADER WHEN I TURN IT ON, NOTHING ELSE, BUT THE BOOTLOADER SCRREN DOESN'T SHOW MY SPL AT ALL.
ALSO, MY COMPUTER DOESN'T RECOGNIZE THE PHONE....... MY PHONE HAS A TYPE 2A BRICK
Helping me will be greatly appreciated
come on.. I'm without a phone
Do you have a 2GB or smaller SD card? Copy a rom image to it and rename it HERMIMG.NBH
Turn it on and you might get lucky!
Just make sure its stock rom that was supplied, or the updated WM06 version as the CID should check out then...
vwkess forgot to mention, reset into bootloader, hold power, ok button and reset with stylus. Hold all buttons in until you get to the tri-colour screen. If it works, follow the prompts....
Cheers...
hi,
i think i can hlep.
i had recently bricked my phone with a custom wm6 image, it worked fine for two days and then i reboot, and all i see was the welcome image, nothing else.
so what i did is -
i pressed the hard reset buttons - power + OK + SOFT RESET (Stylus), kept it pressed for 3-4 seconds, the fone rebooted, the screen was full with some colored bricks i connected my fone in USB and on screen i saw USB.
I then again flashed my fone with the working update, it worked perfectly for me, try may be you can get some luck
ps - before doing all these, i turned my fone off by removing the battery, i removed sim card and mmc card as well.
regards
That may work too, but again, try to flash with a stock rom, untick "connect with USB" in activesync and then try.
Make sure you go to boootloader screen, instruction in rajivlodha's post, before you connect to the pc.
Goodluck...
I need some help as well.
I think I may have bricked my phone. It's a rooted htc hero cdma. I'm running cyogenmod on it and it was working fine, until using metamorph to apply some changes to the theme.
I went to reboot, and it now it won't load past the htc screen. Even when i try the key combination to put it into recover mode. I didn't install a nandroid backup, and i'd be fine with just completely wiping my phone. help is appreciated.
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
(1) Take out the battery / Unplug the phone
(2) Put the battery back in
(3) Turn it on and keep only Vol Down pressed
You should get a tri-color screen. Connect USB. Once it says USB at bottom, you are good to go with flashing.
hard reset
these solutions don't work. I had the same problem. Anyone has an idea?
any ideas about that? anyone found the solution?
enter boot loader n flash a new rom via sd card?
omnia1994 said:
enter boot loader n flash a new rom via sd card?
Click to expand...
Click to collapse
already done that... same problem... anything else?
reubenbubu said:
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
Click to expand...
Click to collapse
put phone into bootloader requires you to press volume DOWN while power resetting the phone. Make sure the ROM is named LEOIMG.nbh and is on the root of the sd card. Make sure the sd card is 8gb or smaller unless it is a class6.
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
you need to put your phone back into bootloader, volume down while powering on the phone. then after you see the tricolored screen, connect it to the usb.
t45o5 said:
already done that... same problem... anything else?
Click to expand...
Click to collapse
what problem are you having exactly???? you haven't told us any details to help you.
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
firebroker said:
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
Click to expand...
Click to collapse
stuck where, on the splash screen?
do the same thing only this time use the HTC support page for the correct stock ROM.
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
firebroker said:
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
Click to expand...
Click to collapse
That's weird, maybe they didn't make a 3.14 ROM for your region.
Help BRicked ! htc incredible s....
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Just downgrade again, I had same prob. Everything good now.
sent from my inspire 4g using xda app.
kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
woah, how the hell did you end up in this forum? lol.
can you get ADB going?
Post your problem in this forum so people who know your device better can help.
http://forum.xda-developers.com/forumdisplay.php?f=1026
HD2 TMOUS stuck after performing task29
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
im having the same problem!i installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again but still nothing...
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
Hello all i have bought a new HTC HD2 phone 3 weeks ago and my friend put a new rom on it for me.
Everything was working fine till i put some foto's and music on the storage card, and i wanted to look and listen to them put suddenly i had nothing else on the storage card, everything was deleted.
And everytime when i turn my phone on i got a popup menu saying that i have to format the storage card, and my pc does not recconize anymore the disc drive, before it worked always perfectly.
So i formatted the starage card but the problem still exists.
I am realy very sad now and this is my last helpline, so i hope somebody can help me here with my problem.
Thanks already.
And i hope someone will have an answer for me.
Greetings Edwin
edwin45 said:
Hello all i have bought a new HTC HD2 phone 3 weeks ago and my friend put a new rom on it for me.
Everything was working fine till i put some foto's and music on the storage card, and i wanted to look and listen to them put suddenly i had nothing else on the storage card, everything was deleted.
And everytime when i turn my phone on i got a popup menu saying that i have to format the storage card, and my pc does not recconize anymore the disc drive, before it worked always perfectly.
So i formatted the starage card but the problem still exists.
I am realy very sad now and this is my last helpline, so i hope somebody can help me here with my problem.
Thanks already.
And i hope someone will have an answer for me.
Greetings Edwin
Click to expand...
Click to collapse
Have you tried to re-install the rom or install another?
Can transfer to phone via blue tooth or network considering your SD card isn't working.
try a hard reset mate might do the trick, it will just reset the phone to when the ROM was first put on the phone, restart the device before it boots push down volume up & down at the same time just follow instructions
i also got this problem with my memory card
phone issue?
i just put a android 2.33 rom on my hd2 and the phone wont work? is there something i can do? please advise.
peteamaro86 said:
i just put a android 2.33 rom on my hd2 and the phone wont work? is there something i can do? please advise.
Click to expand...
Click to collapse
Try bringing up MAGLDR by turn your HD2 off and then turn it back on but keep the power(end) button down and MAGLDR will come up then use hour volume up and down button to to scroll through the options. There is a recovery option select it and it will do what is equal to a hard reset of the Andriod on your phone. If this does not work try reflashing the Andriod ROM if still no Chang try another Andriod ROM. If still no dice out your Pbone into bootloader by turning it off and then teurning it back on but hold the volume down button when you tap the power button and keep holing it down until bootloader comes up once it is up plug your USB ito the computer and phone and wait until serial changes to USB in the white bar at the bottom of the screen and then flash a custom Windows Mobile ROM to your HD2. I say custom cause a official rom will wipe MAGLDR from your phone. Do not flash a official rom, especially don't flash a official ROM from your SD card as it will take wipe MAGLDR and revert your HSPL to SPL and then you will be back to complete stick and square one.
T-Macgnolia said:
Try bringing up MAGLDR by turn your HD2 off and then turn it back on but keep the power(end) button down and MAGLDR will come up then use hour volume up and down button to to scroll through the options. There is a recovery option select it and it will do what is equal to a hard reset of the Andriod on your phone. If this does not work try reflashing the Andriod ROM if still no Chang try another Andriod ROM. If still no dice out your Pbone into bootloader by turning it off and then teurning it back on but hold the volume down button when you tap the power button and keep holing it down until bootloader comes up once it is up plug your USB ito the computer and phone and wait until serial changes to USB in the white bar at the bottom of the screen and then flash a custom Windows Mobile ROM to your HD2. I say custom cause a official rom will wipe MAGLDR from your phone. Do not flash a official rom, especially don't flash a official ROM from your SD card as it will take wipe MAGLDR and revert your HSPL to SPL and then you will be back to complete stick and square one.
Click to expand...
Click to collapse
Thanks! It works now!
I have Motorola droid pro, i have a problem, plz help me to solve it,
I was rooting flash and seting up new softwear with RSD but in the centre of installing softwear my pc went trun off and my cell phone now not working only main logo of Moto Droid pro comes again and again, I want that there comes boatloader screen now that's why i detect phone again and install software plz help me . i m very upset.