Database Users

[Q] HTC LEGEND stuck on htc logo

Hi i have an htc legend that stucks on htc logo and i dont how this phone comes to this mode ,but when i enter boot mode it apears
LEGEND UKNOWN SHIP S-ON
hboot-0.43.0001
microp-0816
touch panel syn07_0103
radio-7.05.35.26L
i dont have gold card!!!
does exist any solution to repair this phone ????

Please explain in detail. Did you root your phone prior to this? Did you flashed a custom rom prior to this? Did this happen out of the blue? Did this happen after 4 hours of beer bong? Enlighten us.

thanks
thanx for support my friend , but i dont know how the phone comes in this mode but for shure someone play with it here in my country every 5 stores is an mobile phone service hihihih any sugestion how to begin repair it ??????????? thnks

galaxy si9000 firmware update/debranding/3button download probs

Hi im looking for some info/help if anyone could ,it would be appreciated.,,.
I have a samsung galaxy si9000, its a replacement for a broken phone under gaurentee.
It came back branded with 3pay network and when i go to kies to update firmware it says im on
PDA:JP5/PHONE:JP2/CSC:JP5 (H3G)
and a new update aval. to
PDA:JVD/PHONE:JV5/CSC:JV6(H3G)
i was wanting to debrand it and as i can not get into 3button download mode, will this update enable it again and if so can i then debrand it with the new fimware on it.
i am not to experienced with mobile phones and wondered if anyone could point me in the right direction,.
your help is most appreciated
thank you for any input
john.
ps
when i try the 3botton fix with odin/abd
when i type in adb reboot download command it dont recognise the command ,also will the 3 button fix brick my phone if it is branded to a network ,.ie 3pay , myn phone is unlocked to any network ,..thanks again

glesgajohn said:
Hi im looking for some info/help if anyone could ,it would be appreciated.,,.
I have a samsung galaxy si9000, its a replacement for a broken phone under gaurentee.
It came back branded with 3pay network and when i go to kies to update firmware it says im on
PDA:JP5/PHONE:JP2/CSC:JP5 (H3G)
and a new update aval. to
PDA:JVD/PHONE:JV5/CSC:JV6(H3G)
i was wanting to debrand it and as i can not get into 3button download mode, will this update enable it again and if so can i then debrand it with the new fimware on it.
i am not to experienced with mobile phones and wondered if anyone could point me in the right direction,.
your help is most appreciated
thank you for any input
john.
ps
when i try the 3botton fix with odin/abd
when i type in adb reboot download command it dont recognise the command ,also will the 3 button fix brick my phone if it is branded to a network ,.ie 3pay , myn phone is unlocked to any network ,..thanks again
Click to expand...
Click to collapse
anyone help me out please will it abd brick fone if its branded ?

The first page has the three button download mode recovery jig stickie .
http://forum.xda-developers.com/showthread.php?t=819551
jje

JJEgan said:
The first page has the three button download mode recovery jig stickie .
http://forum.xda-developers.com/showthread.php?t=819551
jje
Click to expand...
Click to collapse
hi and thanx for reply, i seen the topic on jig stick but im no good with electronics ,will the abd way brick my phone ? as that way seems easaier for me ,thanx again

glesgajohn said:
hi and thanx for reply, i seen the topic on jig stick but im no good with electronics ,will the abd way brick my phone ? as that way seems easaier for me ,thanx again
Click to expand...
Click to collapse
anyone please !!!

i know im not a regular here and sem to come here for help,. but it seems to be the only place to seek help , i hope i never offended anyone here and would like a bit of help please , I am trying now to get back to
http://forum.xda-developers.com/showthread.php?t=785201&page=10
but it now tells me the page is not available can anyone help me out as i dont want to fook my fone ,. does the "adb reboot download" fix work or will it brick my fone and/or is ther another way to debrand it,. im not to good with solder and elctrical stuff,..please help me out here if u would ..yhanx again john

[Q] Stuck @ M sign

Hey guys
i recently got my friend's phone (Defy mini x320) to try and install language pack and keyboard for it, unfortunately when i installed the morelocal-2.2.0 apk updated the language then rebooted the phone it got stuck on the red M sign and doesn't even allow me to get into recovery to do a hard reset, the phone just keep rebooting as it makes a short vibrate then the M sign appear again, I searched the forums here and found some similar problems but when i further read about it it doesn't sound as mine, so i posted this thread
what can i do from now ?
Hope someone can help me
Thanks

http://www.droidevelopers.com/downloads.php?do=cat&id=112
flash your country sbf from there with rsd lite

Thanks
Thanks man,
on more thing, what if i didn't find the carrier, the phone was purchased from Czech but it is currently working in the middle east, so in ur opinion what's best for the phone ?

try this:
http://www.droidevelopers.com/downloads.php?do=file&id=1258

hard bricked PLK-L01

Hello !
I post this here, because I don't think I'll find any solution using software method.
I flashed my rooted honor 7 PLK-L01 with a possibly wrong firmware ( UPDATE 170, originally for plk-l01?!) and it won't boot at all now.
I just get a vibration while pressing voldown+volup+start for 15 secs, but it won't get recognized by usb, even after pulling out the batterie manually.
After some research I've foud that my bootloader/preloader is dead, and the only ways would be using a copper wire to connect two pins, or to use a JTAG tester.
Unfortunately, I don't know how to recognize the pins, how it works, how to flash a rom with that.... and I can't find this informations for my phone, and I'm really a newbie in phone hardware.
For information, I got all we need for phone repairing, and I've heard somewhere that we can make a JTAG with an arduino.
Do someone could help me ? I am a bit lost, and I really want to get my phone back to life x(
Thanks for anything that could help, even small informations !!
have a nice day/night/anything !
PS : sorry if my english isn't perfect, I'm trying to improve it every days.

Hello,
I got the exact same problem. Has anyone found a solution yet ?
Thanks for your help !

Hello, I come from France and I've the same problem, my phone was rooted and I did an update from EMUI and ,unfortunately, my phone has been bricked. There is just a vibration when I press On + down volume. I also saw many JTAG issues for many Huawei phones but not for the Honor 7(PLK-L01). Maybe some developers are working on JTAG for this phone (or not). The idea is to find the famous Golden boot point and short this point to ground (GND). I tried to do this but I didn't succeed...
PS: Sorry if my english is not correct

Boot loop, bootloader, hard reset... please help :(

Hi all,
I need your help because I am a little bit desperated. I have a Xiaomi Redmi 4 Pro, with MIUI Global 8.0 (8.0.5.0.0). I know that this is not the official ROM, but It was the rom that was installed in my mobile.
The point is that since last saturday, my mobile is continuously restarting, (bootloop) I cannot even introduce my sim code. And I do not know why, because I didn't install anything and the mobile didnt receive any damage. I think a possible 'solution' could be the hard reset.... but I would like to get the photos of my phone.
I know that from the bootloader, it is possible to get them using MiPCSuite... but the bootloader is locked. I downloaded the MiFlashUnlock, I know that there is no form right now to unlock the mobile, but since last sunday, MiFlashUnlock fails at 50%. I do not know what else can I do (except using a hammer, hahahahaha ....).
Please can anybody, help me? Is there any other method to get the photos? Once I recover the photos I will ask you again about what ROM should I install and this stuff.... but It would be really really nice if i can get the photos.
Thanks in advance.