Related
Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"
I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps
mitja12 said:
I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps
Click to expand...
Click to collapse
Like I said. I have used a rom from official rom thread=) I also tryed the rom from htc.com with same resoult.
Can I uninstall a bad flash or something and start from the beginning ? Cuz now im stockt in my situation.
Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.
mitja12 said:
Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.
Click to expand...
Click to collapse
Okej! Sorry for missunderstanding. So the only way out is to try everyone ?
I was lucky to get the first released hd2 in my city, so i bett its a old one =)
Does it have to be the same language release to ?
In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.
or just to HTCs website and get it from there (assuming its not a vendor locked device)
mitja12 said:
In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.
Click to expand...
Click to collapse
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?
lovenvik said:
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?
Click to expand...
Click to collapse
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.
lovenvik said:
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.
Click to expand...
Click to collapse
does it freeze on the HTC splash screen?
djchubbs said:
does it freeze on the HTC splash screen?
Click to expand...
Click to collapse
Dont realy know what that its. But I press vol down and start bottom. Then the tri-colored screen shows up "bootloader" for about 1 second. Then i got this screen http://img405.imageshack.us/i/20090607028.jpg/
I have let it load for about 20min, then i gave up.
I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)
Its seems i also have a problem flashing a stock rom for warranty reasons.
I did the following steps:
1. Get an official stock rom. (in my case it would me a NLD ROm 1.48)
2. Put it on storage card en change to LEOIMG.nbh
3. Turn of phone, press volume down en power up unntil tri color screen apears.
4. Follow steps on sreen.
But. I dont get step 4. On step it says for 1 sec ''loading''. After that, it goes back to the trii colour HARDSPL screen.
Does anyone know what im doing wrong?
I tried two different SD cards. A 2 gb version and a 4 gb version (both from Scandisk formatted as FAT32)
Is there a way/possible to flash a stock rom using activesync?
zenkinz said:
I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)
Click to expand...
Click to collapse
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
hehe thats the same reason i want to sent my phone back.. its probably cost 213,- euro for me
You flashed it using the SD card method?
People with the same problem in this thread:
http://forum.xda-developers.com/showthread.php?t=630843
In post #64 fards helped XMOO get the device working again, only with SPL 2.07... maybe the rest of the thread provides more info or solutions. I didn't read any further.
lovenvik said:
Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"
Click to expand...
Click to collapse
why dont you try out from this thread ,it has videos to how uninstall hspl
http://forum.xda-developers.com/showthread.php?t=621930
lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x
EddyOS said:
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x
Click to expand...
Click to collapse
Okej. Thats not good Hope some one release a HSPL 2.xx then =) But now i can't even use my phone anymore.
(just to double check)when you boot to bootloader, what does it say next to spl?
if it says spl 2.x then the above posts are correct, and you are stuck with spl2 until hspl2 is released.
You CAN get your phone working again, even with spl 2.
You need a goldcard, and you can then flash the 2.x official rom which will at least get your phone working. Once it is working, you can then flash custom roms using sspl BUT ONLY roms based on the 2.x official rom, and you won't be able to change radios using sspl. The only way you can change your radio is flashing a 2.x official rom with the goldcard.
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
friendjabi said:
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
Click to expand...
Click to collapse
you will brick your T-Mobile HD2 with this ROM. this is not a compatible ROM for the T-Mobile HD2.
see if this will help you
http://forum.xda-developers.com/showthread.php?t=668347
friendjabi said:
hi
im tray to flash rom hd2 after flash complet phone dead
rom is:RUU_Leo_HTC_FRA_1.66.406.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe pleas solve me that broblem
Click to expand...
Click to collapse
that radio has killed it. You cant get into bootloader, so the above wont help.
Unlucky.
samsamuel said:
that radio has killed it. You cant get into bootloader, so the above wont help.
Unlucky.
Click to expand...
Click to collapse
It's not that its about luck is about reading which ROM is compatible.
Sorry about your brick.
Kenichi
Thats why its always important to read the stickies and the 'for noobs' postings before flashing. They stress it so many times but yet there's always someone who just doesnt read. Or if they do read they dont understand and flash anyway.
Preaching wont help you any now.
Try contacting HTC and see what they say.
Kenchi* said:
It's not that its about luck is about reading which ROM is compatible.
Kenichi
Click to expand...
Click to collapse
words to live by
Lets cut this guy a small break... based on his relatively poor spelling and grammar i don't think he can even read English. It's amazing how he got it to flash in the first place.....
That was a funny one
no have to do with read english i dont not english and i flash everything and i have android on my hd2
I had the same thing happen to me. I downloaded hspl but didnt notice that there was a difference between the leo and tmousa roms. Anyway i installed a rom and it bricked my phone. I have HSPL 2.08 installed. Does this mean i can just retry a different tmousa rom (by sd card or usb??) and im ok?
Or am i screwed too and have to go to a early version?
icexclusive said:
I had the same thing happen to me. I downloaded hspl but didnt notice that there was a difference between the leo and tmousa roms. Anyway i installed a rom and it bricked my phone. I have HSPL 2.08 installed. Does this mean i can just retry a different tmousa rom (by sd card or usb??) and im ok?
Or am i screwed too and have to go to a early version?
Click to expand...
Click to collapse
if you just flashed a rom, you are fine. Boot into bootloader, and flash a compatible rom. Its only radios that kill the tmous, and most custom roms dont include a radio. Its mainly the non tmous official roms you need to avoid.
so basically thats what ive been doing. i put a nbh file into a sd card and load bootloader. It doesnt seem to do anything. I found on you tube that i have to rename the file to leoimg.nbh?
do i have to do this or do i just throw a compatible nbh file and it should autoload in bootloader. Also is there a way to install 2.13.xxx the lastest tmobile stock rom from bootloader? All the ones i have been able to find are in .exe format and want me to have my device be active synced. I tried putting those on a sd card and flashing like that but i didnt do anything.
the funny thing was i really did try to flash a radio from a leo at first but it did not work after 5 attempts. Then the chucky rom finally did the trick.
Now i cant seem to flash from sd card. I dont think i know the process.
no need to flash from sd card, just go into bootloader, plug in teh usb, wait for 'serial' to become 'usb', run customruu on teh pc.
Whilst in bootloader,. check what it says next to 'spl', the number there should end '.hspl' and not '.0000'
damn im trying to install the nibbey rom but it doesnt work. I got it to go to 7% max one time and now its always 0% when i retry. I put the leo_customruu in the same folder as the nibbey nbh. and then start the customruu! is this the correct procedure?
samsamuel said:
no need to flash from sd card, just go into bootloader, plug in teh usb, wait for 'serial' to become 'usb', run customruu on teh pc.
Whilst in bootloader,. check what it says next to 'spl', the number there should end '.hspl' and not '.0000'
Click to expand...
Click to collapse
Yes it says hspl not 0000. Also i think my batter is below 50 percent now with no way to charge it. im starting to be believe that might be the reason it stopped at 7 percent and now the more i retry i get 0%.
also i am not able to get a active sync connection anymore with my device stuck in hspl bootloader. So the whole usb rom flash fails every time. Someone help i need my phone tomorrow.
i got it fixed! turns out i needed a 2gb sd card and it worked perfectly to install a custom rom.
I will buy your brick from you dude.
i installed MAGLDR111 on my hd2 WinMo to install the Nand Andriod rom, but after installin the MAGLDR111 while rebooting it gave the white screen with the HTC logo and froze,and now it is dead even icant do a hard reset nether i can't turn it of....plz help me i don't know what to do.DID i lost my divice
Ok, take off the battery
Put it back in while your holding down the down volume button
Hspl will come
Plug your hd2 to the computer and flash a stock rom
I hope this helped
Sent from my HTC HD2 using XDA App
yz.hd said:
Ok, take off the battery
Put it back in while your holding down the down volume button
Hspl will come
Plug your hd2 to the computer and flash a stock rom
I hope this helped
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
thx it worked but after reinstalling the stock rom it comes again to what happend first.
You must have missed something.
1. Hold vol down to enter HSPL during boot.
2. Either Task29 or directly flash a stock rom to completely revert to original state.
3. If you using custom rom and task 29, make sure you also flash the radio.
In order for the MAGLDR to work, you MUST flash radio that enables 576MB ram. I.e.: radio with *.50.* in its version name. If your stock rom comes with *.51.* radio, you need to change the radio.
Go here (http://forum.xda-developers.com/showthread.php?t=611787) and pick a compatible radio and flash it. Then finally flash MAGLDR. It should work then.
Can anyone tell me where to get a stock rom?
I tried the HTC website, but apparently my serial number is wrong (I dunno why). My provider (vodafone) doesn't have anything either...
pietme said:
Can anyone tell me where to get a stock rom?
I tried the HTC website, but apparently my serial number is wrong (I dunno why). My provider (vodafone) doesn't have anything either...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=623283
you deserve a medal
Thanks
Just a quick question...I want to install HSPL 2.08..which rom do I need?
tidus18 said:
You must have missed something.
1. Hold vol down to enter HSPL during boot.
2. Either Task29 or directly flash a stock rom to completely revert to original state.
3. If you using custom rom and task 29, make sure you also flash the radio.
In order for the MAGLDR to work, you MUST flash radio that enables 576MB ram. I.e.: radio with *.50.* in its version name. If your stock rom comes with *.51.* radio, you need to change the radio.
Go here (http://forum.xda-developers.com/showthread.php?t=611787) and pick a compatible radio and flash it. Then finally flash MAGLDR. It should work then.
Click to expand...
Click to collapse
THX,at last I installed the NAND ANDRIOD and it worked fine ,but the problem is it can't read the SD CARD & the WIFI doesn't work...IS THERE A FIX FOR THAT...PLZ URGENT..
at004 said:
THX,at last I installed the NAND ANDRIOD and it worked fine ,but the problem is it can't read the SD CARD & the WIFI doesn't work...IS THERE A FIX FOR THAT...PLZ URGENT..
Click to expand...
Click to collapse
You need to provide more details. Which build are you using? Did you change the kernel, if so, did u copy the modules as well? Also, have you tried formatting your SD card using the panasonic SDHC card formatter? (It may seem trivial to format, but broken file system will prevent android from mounting your sdcard)
Hey there!
I got some trouble while flashing my HD2 with Android. I processed after a step-to-step instruction using NAND Toolkit.
After i`ve installed the 3.03. HSPL i wiped it (task29).
Then i installed the Radio 2.15.50.14 ROM. At this point i think something went wrong:
The MAGLDR installation runs trough, but after that the MAGLDR Menu doens't shows up.
Can u tell me, where i made a mistake or how i can completely delete my HSPL-Version to start over?
Greets and thanks,
Pascal
Pazens said:
Hey there!
I got some trouble while flashing my HD2 with Android. I processed after a step-to-step instruction using NAND Toolkit.
After i`ve installed the 3.03. HSPL i wiped it (task29).
Then i installed the Radio 2.15.50.14 ROM. At this point i think something went wrong:
The MAGLDR installation runs trough, but after that the MAGLDR Menu doens't shows up.
Can u tell me, where i made a mistake or how i can completely delete my HSPL-Version to start over?
Greets and thanks,
Pascal
Click to expand...
Click to collapse
You need to flash HSPL 2.08, not 3.03.
Nigeldg said:
You need to flash HSPL 2.08, not 3.03.
Click to expand...
Click to collapse
I tried it before, but since then i always get the message, that the usb connection failed. So because of that i asked, if it is possible to delete the HSPL completely or change the version.
TY
Pazens said:
I tried it before, but since then i always get the message, that the usb connection failed. So because of that i asked, if it is possible to delete the HSPL completely or change the version.
TY
Click to expand...
Click to collapse
I think that you have to select run as administrator when right clicked the icon. Try that.
Shaumaaa said:
I think that you have to select run as administrator when right clicked the icon. Try that.
Click to expand...
Click to collapse
It says i got a bad SPL-Version, because i already flashed it to 3.03 HSPL. How can i remove that? Admin rights doesn't affect that.
reg
Flash original ROM via SD, you will have original SPL. Try to install HSPL then.
Marvlesz said:
Flash original ROM via SD, you will have original SPL. Try to install HSPL then.
Click to expand...
Click to collapse
How do i do that?
Pazens said:
How do i do that?
Click to expand...
Click to collapse
Not to be rude, but all of the information can be found via google or xda-search (you can find custom HD2 search by following the link in my sig.).
Edit:
To flash a rom from SD-card, download a compatible official winmo rom, rename .ruu to .zip and extract the .nbh file. Rename to LEOIMG.nbh, put it on the root of your SD card and boot.
To install HSPL, use the HD2ToolKit (google it) and use the "Install HSPL" option.
Marvlesz said:
Not to be rude, but all of the information can be found via google or xda-search (you can find custom HD2 search by following the link in my sig.).
Edit:
To flash a rom from SD-card, download a compatible official winmo rom, rename .ruu to .zip and extract the .nbh file. Rename to LEOIMG.nbh, put it on the root of your SD card and boot.
To install HSPL, use the HD2ToolKit (google it) and use the "Install HSPL" option.
Click to expand...
Click to collapse
I thought it would be that easy that it doens't take too long to give me a little instruction
Thanks for your help, i'll reply if it worked for me! =)
Pazens said:
I thought it would be that easy that it doens't take too long to give me a little instruction
Thanks for your help, i'll reply if it worked for me! =)
Click to expand...
Click to collapse
Yes, it's that easy to give YOU little instructions. But it becomes a PITA when everyone is asking for the same thing over and over.
Marvlesz said:
Yes, it's that easy to give YOU little instructions. But it becomes a PITA when everyone is asking for the same thing over and over.
Click to expand...
Click to collapse
Hm yeah right... obvious
So thanks btw, i hope it works, it's not my phone
Make sure not to flash a radio! Or else you might brick if you flash the wrong one
Hi there again!
Everything worked good so far, i got the standard SPL VErsion, flashed to 2.08 HSPL, was able to install MAGLDR and so on.
After installing a ROM now it stucks at the htc-Logo. For the repartion i used 250 MB system size and 45 mb cache. Could that be a problem?
And i supect another thing. The phone was telekom branded and bought in Germany, but i had to choose EU or Telekom US. I decided for Telekom US. Could this be the problem? I also read things about wrong SD-size but mine is 16 GB and should work fine...
So can you tell me what my problem could be?
Thanks
What ROM did you install?
You must repartition the NAND according to the ROM, not from your mind.
And are you sure the ROM doesn't require an sd-ext partition?
Did you choose the correct option (i.e. Nand, or NativeSD)
Tmo and Eu are basically: Tmo will install ALL to NAND, whereas EU will install some to NAND and some to SD.
Hi,
I have Gingerbread 2.3.5 (Nexus) as the only Operation System on my HD2. It crashes when I use some application e.g. Scan my SD card for medias, using a music player. Now I want to switch to a better ROM like MIUI (that's what I've heard). How can I do that?
Please consider that:
- I'm beginner
- I have only Android (No Windows)
- I have HSLP v 3.* (A version of MIUI which I downloaded and tried to install, only support HSPL v 2.* or bellow)
I will appreciate any kinds of help.
Thanks,
Mas
what loader do you have?
anyways check out the link below & give them a good read, it might help
mengfei said:
what loader do you have?
anyways check out the link below & give them a good read, it might help
Click to expand...
Click to collapse
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"
sallaneh said:
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"
Click to expand...
Click to collapse
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?
Marvlesz said:
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?
Click to expand...
Click to collapse
Well! I asked (and paid) someone to install it for me
I'm thinking about re-installing a Windows and then install an android on my SD card if I don't have any other options.
You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.
Nigeldg said:
You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.
Click to expand...
Click to collapse
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
Doesn't mean that it's an HD2.
sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
you can get one here as low as $100 New
http://s.taobao.com/search?q=HTC+HD...rceId=tb.index&spm=1.1000386.5803581.d4908513
haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.
sallaneh said:
haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.
Click to expand...
Click to collapse
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.
adil1508 said:
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.
Click to expand...
Click to collapse
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards
sallaneh said:
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards
Click to expand...
Click to collapse
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.
adil1508 said:
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.
Click to expand...
Click to collapse
tnx.
I will try task29 and lets see what will happen.
As you can see in the title, I have a NAND Gingerbread 2.3.5 (Nexus) and I'm not very happy with it so I want to recover my winmo 6.5 and then install another rom of Androdi on my SD. Am I in the right path?
- task29
- put the stock rom on my SD
- reboot and install the winmo 6.5
regards,
Masood
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards
sallaneh said:
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards
Click to expand...
Click to collapse
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually
adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
adil1508 said:
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually
Click to expand...
Click to collapse
I will check these parameters as soon as I get home!
sallaneh said:
I will check these parameters as soon as I get home!
Click to expand...
Click to collapse
Good,
Btw, here is the rom link. Download it. Its neccassay regardless of what answers you provide
http://forum.xda-developers.com/showthread.php?t=933951