i need help to UnBrick Lg l3 E405 i cant Find any Stock rom or Firmware to flash what should i do
have you check this;
http://forum.xda-developers.com/showthread.php?p=38691391
it's contain about how to unbrick your E405
I already Checked this Post But
I Cant Find Firmware The Given Link Didn't Work
------------LG Optimus L3 stock lg/-phone-firmware.com/index.php?id_mod=11
This On I mean Don't work if you Can Get me A link For Lg L3 e405 Firmware Iam Gonna Be Grateful
If Any One Plz Can upload E405 v10G Firmware I really need It
Already Fixed
i Did Fix The Problem if any one Have any Problems in Flashing Firmware For Lg L3 E405 Iam Gonna be Glad To Help Him
Laaaaaater
ortega1889 said:
i Did Fix The Problem if any one Have any Problems in Flashing Firmware For Lg L3 E405 Iam Gonna be Glad To Help Him
Laaaaaater
Click to expand...
Click to collapse
hi bro i bricked my lg e405...its not booting now just showing lg logo and sometimes boots into cwm recovery but i am unable to flash any .zip file because it keep displaying unable to mount sd card neither internal sd...
what i did just explaining
1) flashed cwm recovery with link2sd and partition support
2) then i tried to flash ics remixed v2 by putting icsremixed v2.zip in ext sd card
3) i enterd recovery but when i try to flash zip it says unable to mount sd card
4) so i copied ics remixed v2.zip to internal sd card and flashed it
5) then i flashed ics remixed kernel
6) then i waited for reboot but it was keep rebooting
7) then i enter again in recovery and used wipe all data
8) AND NOW THE PROBLM IS I CANT FLASH ANYTHING VIA INTERNAL AS WELL AS EXT SD CARD AND PHONE IS NOT BOOTING BECAUSE NO ROM IN IT...
PLEASE HELP ME...I TRIED EMERGANCY MODE USING KDZ UPDATER BUT NO LUCK.
Unbrick LG E405
ortega1889 said:
i Did Fix The Problem if any one Have any Problems in Flashing Firmware For Lg L3 E405 Iam Gonna be Glad To Help Him
Laaaaaater
Click to expand...
Click to collapse
plz help me i have intalled CWM recovery i did backup and restore at the same time and now my phone does not reboot and boot
Help with E405 - FIRMWARE
ortega1889 said:
i Did Fix The Problem if any one Have any Problems in Flashing Firmware For Lg L3 E405 Iam Gonna be Glad To Help Him
Laaaaaater
Click to expand...
Click to collapse
Hey
I need help with flash it. I've bricked my grandfather's phone.
Can U help?
ortega1889 said:
i Did Fix The Problem if any one Have any Problems in Flashing Firmware For Lg L3 E405 Iam Gonna be Glad To Help Him
Laaaaaater
Click to expand...
Click to collapse
Need you help plz can't unbrick my LG E405.
Thx
Related
hi all , i was on stock , i installed cwm recovery and installed a custom rom whch wasnt good , i wanna to go back to stock but when i open lg support tool n flash tool and select kdz file and sofware update starts so i get this error , i format my phone , re installed windows but same problem , is it because i dint remove cwm recovery or what? i still ve cwm recovery n i dno hw to remove it , someone please help , thnx
pw1nce said:
hi all , i was on stock , i installed cwm recovery and installed a custom rom whch wasnt good , i wanna to go back to stock but when i open lg support tool n flash tool and select kdz file and sofware update starts so i get this error , i format my phone , re installed windows but same problem , is it because i dint remove cwm recovery or what? i still ve cwm recovery n i dno hw to remove it , someone please help , thnx
Click to expand...
Click to collapse
Did you flashed a rom for F320L only? What rom u flashed? Install windows xp then try reflashing?
marshygeek said:
Did you flashed a rom for F320L only? What rom u flashed? Install windows xp then try reflashing?
Click to expand...
Click to collapse
i flashed the hk v1 rom at first , then i flashed vdt-v5 and now currently using that one , and now im trying to go back stock but cant , you can see the error , i installed xp last night , downloaded all the drivers , but i was gettin some error like ''LGE ANDRIOID NET MTP DRIVER'' is not installed and it caused me the issue , i seached allot about it and installed some mtp drivers but the same problem so i came back to windows 7 , but rememer i flashed stock firmware thruough windows 7 before too , it worked and at that time i never used custom roms and cwm recovery but after flashing custom roms and installing recovery im having this issues..
Hello Guys, Noob here.
I Rooted My LG E400 L3 Some Months Ago And Installed CWM And CyanogenMod 9 ICS - Nightly. But i removed It for Some Network Issues.
By Mistake I Did The OTA Update Usiing Software Update From The Device. After Updating I Just Get The CWM Recovery Screen On Booting. I Tried To Flash Some Backups, And CM9 Also But It Didn't Worked. I Also Tried Flashing Stockrom Which Also Failed! Finally I Tried To Flash The Firmware Using KDZ Updater But When In Emergency Mode I Flash The KDZ File It Says Phone Was Not Found! I Think It is Because My USB Debugging Is Not On And I Cannot Do It Also Coz The Phone Is Not Booting Up.
Please Help Me Guys What To Do!! Please Help ME!
AppY.fTw.wOw^ said:
Hello Guys, Noob here.
I Rooted My LG E400 L3 Some Months Ago And Installed CWM And CyanogenMod 9 ICS - Nightly. But i removed It for Some Network Issues.
By Mistake I Did The OTA Update Usiing Software Update From The Device. After Updating I Just Get The CWM Recovery Screen On Booting. I Tried To Flash Some Backups, And CM9 Also But It Didn't Worked. I Also Tried Flashing Stockrom Which Also Failed! Finally I Tried To Flash The Firmware Using KDZ Updater But When In Emergency Mode I Flash The KDZ File It Says Phone Was Not Found! I Think It is Because My USB Debugging Is Not On And I Cannot Do It Also Coz The Phone Is Not Booting Up.
Please Help Me Guys What To Do!! Please Help ME!
Click to expand...
Click to collapse
I think You are bricked ur device
try reboot your phone while flashing kdz. this will detect your phone. if you can enter emergency, it not dead
AppY.fTw.wOw^ said:
Hello Guys, Noob here.
I Rooted My LG E400 L3 Some Months Ago And Installed CWM And CyanogenMod 9 ICS - Nightly. But i removed It for Some Network Issues.
By Mistake I Did The OTA Update Usiing Software Update From The Device. After Updating I Just Get The CWM Recovery Screen On Booting. I Tried To Flash Some Backups, And CM9 Also But It Didn't Worked. I Also Tried Flashing Stockrom Which Also Failed! Finally I Tried To Flash The Firmware Using KDZ Updater But When In Emergency Mode I Flash The KDZ File It Says Phone Was Not Found! I Think It is Because My USB Debugging Is Not On And I Cannot Do It Also Coz The Phone Is Not Booting Up.
Please Help Me Guys What To Do!! Please Help ME!
Click to expand...
Click to collapse
try my method
http://forum.xda-developers.com/showpost.php?p=45988501&postcount=23
works for me everytime
tnx all of u guys i slvd the prblm
Hello, I'm new here and I have a problem.
About 2-3 weeks ago I flashed my Optimus l7 to cyanogenmod 10.2 nightly. (I have my device rooted, The last version of cwm and bootloader unclocked)
Now I really want to install the old v10a ICS back on my device but I can't.
I followed this thread: http://forum.xda-developers.com/showthread.php?t=2204614
But when I saw that when I try to flash that rom, it loads about 25% and then "setup coplete". I installed the wi-fi fix, and keyboard too.
Even after I make a factory reset, my phone is stuck at the LG logo.
I'm lucky because I forget to delete the cyanogen zip from sd card, so I flashed it again
.
I really need some help. I fell like I'm stuck with cyanogen forever... Kdz updater doesn't work with this rom..
Thanks for reading this.
You do it for baseband ? Install CWM , then get some flashabe baseband ZIP .
You do it for soft ? Get some Stock v10 flashable ZIP and baseband too .
Something else ? Get some v10 DOWNGRADE KDZ image ...
I have the same problem that OP have, it would be great if we hear solution
thanks
Hello,
recently I bricked my LG G2 d802. That happened to me few times before so I tried the same method that worked then.
I used LG Flash tool to flash *.tot and *.dll files trough download mode which didn't work, as soon as the phone has to reboot into system it goes into recovery. I also tried to flash CM 11 M11 using OTG cable but it doesn't work because the USB(FAT 32 foramat) isn't recognized. Is there anything I can do to get my phone up and running? :crying:
NOOOBeliminator said:
Hello,
recently I bricked my LG G2 d802. That happened to me few times before so I tried the same method that worked then.
I used LG Flash tool to flash *.tot and *.dll files trough download mode which didn't work, as soon as the phone has to reboot into system it goes into recovery. I also tried to flash CM 11 M11 using OTG cable but it doesn't work because the USB(FAT 32 foramat) isn't recognized. Is there anything I can do to get my phone up and running? :crying:
Click to expand...
Click to collapse
Did you tried to flash .kdz firmware?
t-shock said:
Did you tried to flash .kdz firmware?
Click to expand...
Click to collapse
Yes, but I've foung out that thats only for USA versions of this phone and I have Int.
kdz/tot = int
NOOOBeliminator said:
Yes, but I've foung out that thats only for USA versions of this phone and I have Int.
Click to expand...
Click to collapse
Tell me your variant of phone. I guess it's D802.
mss1988 said:
Tell me your variant of phone. I guess it's D802.
Click to expand...
Click to collapse
Yes
Fixed.
hello i need some help.
im trying to install a original rom of this page http://lg-phone-firmware.com/index.php?id_mod=13 with kdz updater and none working all are giving me this error.
what can i do?
Before doing this have you double click WINDOWS ENABLER.EXE?