Database Users

app2card for milestone, N1, Desize

use app on sdcard
source: Thank hainguyen273
http://www.tinhte.vn/threads/456586-App2Card-2.2.2-(14-8)-Cai-dat-ung-dung-len-the-nho-Phan-vung-the

Any one tried this?

anheuer said:
Any one tried this?
Click to expand...
Click to collapse
Got a 10 foot pole?

Yes... I have ben tested the version 2.1.4 and i have to restore a nondroid backup. If a new one version works I post here.

I'm using version 2.4.1 on my Milestone XT720. It's been a month now and running smoothly.

spiderx_mm said:
I'm using version 2.4.1 on my Milestone XT720. It's been a month now and running smoothly.
Click to expand...
Click to collapse
latest version currently running on my phone is 2.4.4 and 2.5 is available in Developer's forum.
should be work.

sorry for my dumb question..but how does it work? i installed 2.5 on my rooted milestone with 1gb ext2 partition on sd card.
then i chose "install app2card/transfer apps"..it said that all apps were copied to ext2 and i can see it from the drive infos.
but now? i have the apps both in internal and external memory? i wanted to free some space in internal memory..how can i do it? i tried to translate the vietnamese page but it wasn't so clear (at least for me). any help would be very appreciated,thanks.

etoy said:
sorry for my dumb question..but how does it work? i installed 2.5 on my rooted milestone with 1gb ext2 partition on sd card.
then i chose "install app2card/transfer apps"..it said that all apps were copied to ext2 and i can see it from the drive infos.
but now? i have the apps both in internal and external memory? i wanted to free some space in internal memory..how can i do it? i tried to translate the vietnamese page but it wasn't so clear (at least for me). any help would be very appreciated,thanks.
Click to expand...
Click to collapse
after transferring the apps, have you reboot the phone? if you've rebooted, open App2Card to see whether it is successful or not.
if there's no error message pop-up and the AppStatus: is showing "Locaton: SD CARD" then you're good to go.
to clear-up your internal memory, power-off the phone, remove SD card and boot.
(don't worry, it will boot) with something like the phone is reset. there, uninstall the apps that appearing in the list. (except App2Card) it will clear more space. (don't worry about the apps, it's already copy to your SD card).
once you've finished, insert the SD card and reboot.
then, click Menu>Wipe>Dalvik-Cache>Internal Memory
it will release some more space in your internal RAM.

hi thank you
use milestone 2.1 rooted and run app2card 2.793 ...goes fine
but find weierd issue with wifi and fat 32 sd card. i do reboot & pull out sd card still same..
if milestone able to conect wifi network the fat32 seem not mounted/ not accesable
turn off the wifi restart and fat 32 can read .but then turn on wifi ,not able to conect to same wifi network
how to fix this...thx

Internal sdcard

Hi,
How to show internal sdcard on my comptuer? I see external sc-sdcard when plug the phone but no see internal sdcard (2 gb)

On what ROM? On stock ROMs it should mount both, internal and external cards.

Blefish said:
On what ROM? On stock ROMs it should mount both, internal and external cards.
Click to expand...
Click to collapse
Hi, I came from CM7.2, AURORA ICS 4.04 is very usable for everyday use, but i would use internal SD instead of external (slow). In CM there was an option in General, but here I don't find it. It mounts in /mnt/SDCard1, but only FilesManager see it... TIA!

Hi Blefish,
I use Aurora 2.04. I use both on phone but i can't use it on Windows, only use external sdcard on windows

selimozbas said:
Hi Blefish,
I use Aurora 2.04. I use both on phone but i can't use it on Windows, only use external sdcard on windows
Click to expand...
Click to collapse
it's aurora bug.
Sent from my u8800 using Tapatalk 2 Beta-5

Guys help me
I installed Legolash rom and i have one problem.
From X5 settings, when i choose internal memory, i loose the sd card and when i choose the sd card i loose the internal's.
How i can have both of them, like the official's rom?

Staf1988i said:
Guys help me
I installed Legolash rom and i have one problem.
From X5 settings, when i choose internal memory, i loose the sd card and when i choose the sd card i loose the internal's.
How i can have both of them, like the official's rom?
Click to expand...
Click to collapse
You can't! That option is because you can only have one at a time...
Sent from my U8800 using xda premium

[Q] ideos x5 Aurora ICS 4.0.4 internal memory issue

I installed Aurora ICS 4.0.4 on my ideos x5. First i installed "aurora_5.0_experimantal" and then used "aurora_5.0_update20". Everything seems working good but when i remove my external sd card, my phone is not using internal memory for save data. it is asking external sd card to save any data. i.e save screenshot, save picture, recording etc. Did i do something wrong when i was installing rom?

Aurora doesn't support use the internal storage for system datas

Internal memory on our phone is not meant to be used that way. If you want to use it, the ROM you are using must have that functionality.

rqmok said:
Internal memory on our phone is not meant to be used that way. If you want to use it, the ROM you are using must have that functionality.
Click to expand...
Click to collapse
hey guyz ty for answers. I solved my problems. My extsd card was set as dafault sdcard i changed some system files. Now my internal sdcard is dafault sd card. and at last i noticed that custom rom is not really functioned at all. anyway i like aurora ics rom. i hope it will become more functioned. Sorry my english

HELP
Dalaitseren said:
hey guyz ty for answers. I solved my problems. My extsd card was set as dafault sdcard i changed some system files. Now my internal sdcard is dafault sd card. and at last i noticed that custom rom is not really functioned at all. anyway i like aurora ics rom. i hope it will become more functioned. Sorry my english
Click to expand...
Click to collapse
Please how did you change the files and how did you changing them. i am having the same problem. Thanks in advance

SD card not detected/shown when connecting to PC

Dear fellows,
This is a very unpleasant situation. I have flashed the Marshmallow ROM of artas182x:
http://forum.xda-developers.com/gal...shmallow-note-3-t3349306/page109#post69202143
Everything is PERFECT, even FDE is working! But when I connect the phone to my laptop,
I can only see the Internal memory, but I can NOT see my SD card, hence I can't copy any
files to it directly. I need to copy to the Internal memory and then move the files on the
phone, which is a quite annoying 2-step process.
I have decided to post a new thread for this, because Artas is not replying to my posts
and not even to a PM which I sent him.
PLEASE help me, as this is the only ROM which has encryption working. I have tried
Slim ROM, Phronesis, DarkLord and also VisionX (Lollipop) and none of them has
encryption working, it always fails with something I'm sooooo frustrated
Many many thanks in advance!

i would install the Samsung USB drivers .
Format the sd card .

JJEgan said:
i would install the Samsung USB drivers .
Format the sd card .
Click to expand...
Click to collapse
Hello and thanks for your reply, but I am not sure, that this will solve my problems, because...
With all the ROMs - Slim, Darklord, Phronesis - when I connect the phone to the laptop,
in Windows Explorer I can see Internal Storage and next to it - SD card.
Just with the ROM of Artas - when I connect it to the laptop, I only see Internal Storage.
Isn't there some setting for this, some file that I can edit or (re)move or I don't know, just
something. How it can be that with EVERY ROM I tried, the SD card is seen on the PC,
just not with the ROM of Artas. Thank you.
P. S.: Or perhaps there is a way to take the drivers/modules responsible for SD card from
another ROM and put it in Artas' ROM ?

Your using Marshmallow, are you using your SDcard as portable or integrated storage? if you have formatted the SD as internal storage it will now be an encrypted partition only accessible by the phone itself. Connecting to desktop will only show the internal data storage. If you want direct access to SD card, format it as portable... if still not working reboot to TWRP Recovery, enable MTP and mount SD storage along with system partition, sd storage should be executable on the desktop. You can also decrypt the Marshmallow SD internal storage but its another story.

Hello jordanpa and many thanks for replying to my problem!
I should have written about this as well - I did NOT format the card as internal storage.
I am using it as emergency rescue - keeping a copy of the Slim ROM and TWRP there,
because several times it happened that the Internal storage got completely wiped and
I needed to have something to flash in order to get the phone running.
So, this is not the cause of the problem, unfortunately... Please suggest something else.

P. S.: Could that be caused by a virus/malware ??? What can I do, in order to rule out this possibility ?

darkman088 said:
Hello jordanpa and many thanks for replying to my problem!
I should have written about this as well - I did NOT format the card as internal storage.
I am using it as emergency rescue - keeping a copy of the Slim ROM and TWRP there,
because several times it happened that the Internal storage got completely wiped and
I needed to have something to flash in order to get the phone running.
So, this is not the cause of the problem, unfortunately... Please suggest something else.
Click to expand...
Click to collapse
Darklord and phronesis 5.1.1?.
You need to format it first time to be used on 6.0.1.
Sent from my SM-G925F

darkman088 said:
P. S.: Could that be caused by a virus/malware ??? What can I do, in order to rule out this possibility ?
Click to expand...
Click to collapse
If you are regularly flashing custom ROM's and wiping system partition etc you can pretty much rule out malware or virus, especially when diagnosing function issues like reading partitions. The most vulnerable devices are those running on the same stock firmware with no anti-virus and outdated security patches.
Check the permissions for each partition, It will need to be readable for not just the phone.

Rosli59564 said:
Darklord and phronesis 5.1.1?.
You need to format it first time to be used on 6.0.1.
Sent from my SM-G925F
Click to expand...
Click to collapse
Nope, I was trying Darklord and Phronesis based on Marshmallow. I have read somewhere, that encryption has been implemented much better and more secure on Marshmallow. On Lollipop I only tried VisionX which was working very well, but again it failed to encrypt my device.
About the malware/virus - this is another problem that I have on another phone. Maybe I wrote this by mistake in this thread...

In Device manager I see 2 unknown devices:
CDC Serial
SAMSUNG_Android
I tried the buttons update driver - Windows didn't find nothing.
Then I tried to uninstall the driver and replug the phone - after a while it gave me:
The driver software was not successfully installed
What can be done, please advise on how this can be solved ? Thanks!

JJEgan said:
i would install the Samsung USB drivers .
Format the sd card .
Click to expand...
Click to collapse
Maybe you'll turn out right in the end. Could you please provide a link to the drivers ?
Many thanks!

darkman088 said:
In Device manager I see 2 unknown devices:
CDC Serial
SAMSUNG_Android
I tried the buttons update driver - Windows didn't find nothing.
Then I tried to uninstall the driver and replug the phone - after a while it gave me:
The driver software was not successfully installed
What can be done, please advise on how this can be solved ? Thanks!
Click to expand...
Click to collapse
Try manual driver installation..
Sent from my Xiaomi Mi 5 using XDA Labs

harish15 said:
Try manual driver installation..
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
Yep, manual, click on the button Have disk, etc. But it's necessary to have (as far as I remember correctly) an .inf file and 1 or more .dll files. Where do I get those ones from ?
Thank you!

[Q] My phone now recognises only half of internal storage after trying A.Storage!

So today I tried the new CM13 ROM by NickVerse and I tried the Adoptable Storage option. My SD card had two partitions and was empty. For adoptable storage the phone formated all the SD card so the second partition of course got deleted and the card worked as internal. Problem is that after that my internal storage was maximum 4 gb... How do I fix this now?
I have tried deleting dalvik... didn't fix it
Tried reflashing CM13 with everything it needs... didn't fix it
Tomorrow I will be trying flashing the stock firmware so I hope things will work good... But in case they don't.. I guess my only option is to use adoptable storage for my 32GB sd card to supplement what I lost... and never be able to remove the card...
Please tell me if anyone has ever seen something like this... I am honestly scared and I hope that I won't have to buy other phone in the end... :crying:
Please give me a hand in solving this... Anyone.. vaserbanix? NickVerse? Mybe you know...
How do I restore my internal phone memory to the maximum 8 GB it had before...? :crying:

saedlar93 said:
yeah its normal, cm shows only the data partition size witch is around 4.5gb and Samsung shows the whole size witch includes system, cache, recovery, boot ... etc partitions witch is 8gb
Click to expand...
Click to collapse
The same question here http://forum.xda-developers.com/gal...nal-memory-4gb-flashing-cm12-1-t3497602/page1
Sent from my SM-J500H using XDA Labs

saedlar93 said:
The same question here http://forum.xda-developers.com/gal...nal-memory-4gb-flashing-cm12-1-t3497602/page1
Sent from my SM-J500H using XDA Labs
Click to expand...
Click to collapse
On my phone even TWRP recognises only half of internal storage... So I don't think it is a ROM thing.... Wish it was....:crying:

Amarius1 said:
On my phone even TWRP recognises only half of internal storage... So I don't think it is a ROM thing.... Wish it was....:crying:
Click to expand...
Click to collapse
I guess that no ROM would function/flash normally if you have only 4gb, so if Nick's CM13 is booting you shouldn't worry cuz probably everything is fine
Use this command via ADB to get partition table details
adb shell df
Sent from my SM-J500H using XDA Labs

Try using the resize option in TWRP. This is designed to fix incorrect partition size issues.