[Q] Power button repair - myTouch 4G Q&A, Help & Troubleshooting

Power button is completely dead (well the contact at least),
thankfully I can still use adb to reboot the phone from cold start (although its a hassle everytime the phone dies).
What I need to know is exactly what component needs replacing.
I'm assuming its this, Audio-Volume-Button-Power-Flex-Ribbon-Cable
Since it looks like the only component I found on ebay with what seems to be exactly what the power button is squeezed on.
Can anyone confirm it before I place my order and mangle my phone to hell?
Thanks in advance.

nee_vak said:
Power button is completely dead (well the contact at least),
thankfully I can still use adb to reboot the phone from cold start (although its a hassle everytime the phone dies).
What I need to know is exactly what component needs replacing.
I'm assuming its this, Audio-Volume-Button-Power-Flex-Ribbon-Cable
Since it looks like the only component I found on ebay with what seems to be exactly what the power button is squeezed on.
Can anyone confirm it before I place my order and mangle my phone to hell?
Thanks in advance.
Click to expand...
Click to collapse
That looks right. Mine was having trouble too. Turns out the little metal circle that was taped to the top of the button had fallen off. My solution was to get a small piece of aluminum foil about 1cmx2cm. Fold it in half and then mold it around the white plastic "button" inside the case shell. Then just carefully put the case back together. It works. Not as good as new, but I can turn it off/on just fine. Just take a bit more pressure than stock.

Related

8525 White Screen of Death - Is there Hope?

Ok so I have the fabled white screen issue on an 8525. When it first occurred I searched and read all the write ups, decided I had the ribbon cable issue. Took it apart and simply unplugged and replugged the ribbon cable with great results, no more white screen.
I repeated once when it came back after being bumped around, again with positive results...but this last(3rd)time instead of it working I now get white screen 95% of the time. I re-notched the sliders the first time, and last time.
During the 5% it works I noticed the charge light would correspond to it going white.This never happened before...
Example:
When OFF - Connect charger, Red light for 1 second, then nothing=White screen from power on
When OFF - Connect charger, Red light for 1 second, then orange charge indicator = normal startup
When ON and Working - Connect charger, no light, no charge - reboots to white screen
When ON and Working - Connect charger, orange charge indicator, reboots normally.
There is no heat or noticeable pressure on any parts, everything seems to fit normally.
It does boot normally with screen white.
Any ideas? I really don't want to give up on this thing, is there any hope? or just ebay it for parts?
Thanks
-Nick
same problems here, if someone could just tell me what parts to order, cause I have no warranty (ordered over ebay). I tried both the instruction that has chinese fonts on the page , and other from R&R, no luck, white screen all the way..
I had the WSOD and took it apart and reassembled a few time. The 3rd or 4th time the screem came back, but now it is shifter to the right around 1/4" or so. I mean there is just white along the left edge, then the normal screen/color starts and is cut off on the right.
Does anyone know how to correct that, is it related to the same flex cable or is there something else I disturbed?
mine will fade to white.. then i just push the power to put it in standby, then push power again to wake it back up and back to normal.. it rarely does it but still annoying...
If You Ordered From At&t
I had this problem about 2 weeks ago!!!!
I thought it was a fluke!
Anyway, walked over to 43rd and Lexington (NYC FOR THOSE WHO DON'T KNOW THAT MANHATTAN IS THE CENTER OF THE WORLD)
and they gave me the EXCHANGE HOTLINE for at&t.
I called them up, told them my screen is fading to WHITE and the lady sent me a new or referbished phone.. i dont even know.
Just so you know, i ordered my phone on AMAZON with a new activation. its covered under the MANUFACTURERS warentee for a full year from the date of purchase... so is the REPLACEMENT PHONE... but not from the date of replacement, just the date of purchase.
did anyone get deeper into this yet? I got a 8500 (need those without camera) from ebay USA, already with white screen. After reading here, that this is mostly an issue with connectors, I bought it, disassembled it and reassembled it, though still white. Should I give the contacts a treatment with contact-spray? (there's a tuner spray that doesn't leave residues) Or is there something broken within the ribbon cables? Seller said it has been dropped (but he also said, he didn't want to open it, while it clearly has been opened, one screw missing and warranty seal gone). It ssems to boot up normal otherwise, I hear a sound after the boot process, so probably this isn't a software issue?
Edit: another thing I noticed: When I run it without any keyboard connected at all, it's also white. I then connected the dpad again, and I could see a hint of the at&t logo in the lower part of the screen. When I pressed around on the back of the dpad a bit, all LEDs would go on/off... Sound to me like the dpad has gone bad, possible?
Edit II: Got it. Using a 20x eyeloupe I found that the PCB of the DPad is broken under the little chip on it. Now I just gotta find a dpad here in germany, but I assume those Hermes' are all equal...
hello
where can I get manual (if there is one) for disassembling hermes. link in wiki does not work.
thanks
this worked good for me
http://inuchanbt.blog54.fc2.com/blog-entry-100.html
Anyone know if this applies to the 8125 as well? I've got a flickering white screen. I had dropped my phone a few weeks back and cracked the LCD. Replaced it with an OEM LCD - it worked fine for about 2 weeks and then just suddenly went all white. Phone still works, I can still get calls - just can't see who is calling.
I don't recall that the wizard had the same problem... Though from a logical point, it seems that there is an issue behind white screens and the thumbpad being responsible for it, so it may well be the same thing. Perhaps just disassemble the wizard (there should be a howto too) and check if theres a similar connection from mainboard to thumbpad circuit.
Is there a disassembling manual for a imate k-jam that anyone knows about?
Here's a website with a video manual i found useful...
http://viralelectronics.com/category/howto/page/2/
Figured out the problem...
The only reason I figured out the screen goes blank is because the motherboard loses connection with the screen when you slide the keyboard out...try this out and see if the screen comes back...
put the screen on sleep mode (no white screen)...then slide out the keyboard and tilt it a little hard after pressing on the screen and put the power on. if it doesnt work try again it might take some pressure and power to make it work...be careful not to put too much power but as far as I went, it's a very sturdy cell.
alternately, slide out the keyboard in sleep mode, and press all the buttons really hard and then try to press the power button (press more towards the space bar because that helps)...if any of this works and the screen comes back on even just for a second...follow the following
Go back to the person who gave the link to the site with opening the HTC instructions and follow through and clean the whole phone up from dirt around the screen and such...you dont need to put those rubber things or whatever it says to put on the screen...then when you are putting it back together, press hard on the wire connecting the touch screen to the motherboard. I suggest sealing it with a good tape...and then you are good to go! I did it but it had a few glitches...the screens contrast sometimes goes awry but it is still visible and responds to touch. Also, the physical buttons work as well!!
Good Luck and do it at your on risk.
Have any of you tried this? http://forum.xda-developers.com/showthread.php?t=321163
hope the best
i tried this and it worked for me. i also pressed alil hard around the d-pad and heard a pop. i think it poped back into place.
thanks
razor rc said:
i tried this and it worked for me. i also pressed alil hard around the d-pad and heard a pop. i think it poped back into place.
thanks
Click to expand...
Click to collapse
i still have this problem.
fixed my wsod
I noticed a few days ago my 8525 screen went white, rebooted and it went away. Today it came back, but would only go away for a few seconds and then back to white. After reading some forums I decided to check the connector. I took the phone apart following this site as a guide. I removed the connector on the board side and cleaned the contacts with a qtip and denatured alcohol. Phone has been perfect for the last few hours, no more white screen of death. I didn't mess with the connector on the LCD side, just the board side. I'm a computer tech and I found it quite annoying to disassemble, but I managed without causing any damage, however, I'd rate the job at about a 8/10 as far as technical ability.
Joey
warped0202 said:
I noticed a few days ago my 8525 screen went white, rebooted and it went away. Today it came back, but would only go away for a few seconds and then back to white. After reading some forums I decided to check the connector. I took the phone apart following this site as a guide. I removed the connector on the board side and cleaned the contacts with a qtip and denatured alcohol. Phone has been perfect for the last few hours, no more white screen of death. I didn't mess with the connector on the LCD side, just the board side. I'm a computer tech and I found it quite annoying to disassemble, but I managed without causing any damage, however, I'd rate the job at about a 8/10 as far as technical ability.
Joey
Click to expand...
Click to collapse
i agree that this is one of the first things to try in curing the white screen issue. Others may find their problem runs a little deeper and the contacts on the d/pad chip are broken. An improvised cure which may not be very permanent is to place a little padding on the surface of the chip as described here:
http://forum.xda-developers.com/showthread.php?t=321163
If you have appropriate heat gun equipment you can re-flow the solder on the d/pad daughter board - but remember to remove the sticky key pad layer or you'll cook it!!
I regret that I'm closing this thread because we have several "White Screen" threads and the questions and answers are being spread all over the place.
Please use this one for future posts:
http://forum.xda-developers.com/showthread.php?t=321163
Mike

Hermes White screen

I have read many threads and forums about the problem of the Hermes becoming white. The soft reset in this case does not help.
I found the explanation in my case and I am not able to fix it quickly, without opening the device to screw the connector.
The problem is only due to the temperature of the device. When the temp is to hot, the screen is white, in my case, it typically happens when it stays in my pocket et I moving too much throug the office ;-)
Solution, simply open the keyboard and gently blow in the thin area between the two parts of the device.. in my case, the screen comes back in 2-3 seconds.
Enjoy !
Eric
Hermes/Schaps 4.31/Orange CH
To be honest, I have this problem on my 838 (wizard) previously.
I have found someone (engineer who I need to pay) help me to check.
It is actually the connection cable between the keyboard and screen start breaking.
This makes the connection poor.
End up, my wizard cannot be repaired and I have borrow my freinds hermes to use in the mean time.
I suggest you pay special attention to it.
I suppecm that you blow it is actually helping the connection of that cable.
huh
are you guys serious in what you're talking about?
blow in between the two parts of the device when it's hot to get the connection of the cable back?
are you sure you are talking about a mobile phone and not about a compressor?
thanks for your feedback. I am convince that in my case, the gentle blow does not move the connecting cable.
Additionaly, the tipical symptom reported in various thread is that the soft reset does not help, while letting it apart for 15 minutes does help. It can confirm that the simple temperature idea is fine.
Again, it works for me, it can help others, and sorry for the others that won't find a solution with mine!
actually, i am neutal to this topic.
But just want to share my experience.
In my case, my cable is aging. Initially, it can help with slide the keyboard open and close.
End up the engineer told me that cannot be repaired deal to no parts. he examined it using a microsope watching the cable.
no need to take it too series.
It is a cable connection issue, it is caused by either dropping or opening and closing the device numerous times. It can be fixed the part cost around $20 kinda hard to find but can be found if you search enought. I can repair the device if your interested either pm me or you can contact me at
[email protected]
nate
when this happened to my hermes last August i found slightly unscrewing the two screws on the back of the screen fixed it & not had a problem since
didnt know what the white screen was 'till i got it right after the external volume crapped out, so tired of tinkering with hermes, going Kaiser
As a science experiment I have bought a number of hermes on ebay- it is a cable connection issue or worn cable in the 4 I have played with - all fixed by cleaning and reinstalling cable/connection or replacing the cable assembly. I cant say this is the only bug but 4 outy of 4 inducates a trend to me
John
Oh my gosh, topic starter, that is the same exact issue that I frequently have with my 8525. I eventually found out that if I leave it in direct sunlight, put it in my pocket for too long, or in anyway expose it to relative heat, then it would turn white.
That's a nice "fix" you have there hahah. As for me, I just let it cool down by placing it in a cool and shaded place, works like a charm after a few minutes.
Anyone with a WHITE screen MUST READ this!!!
To bring credit to what I say below, I haved had tinkering experience with electronics for the past 10 years, not to mention that I am currently a 3rd year electronics engineering student.
I currently have 4 hermes units.
When I first had the white screen prolem on my first hermes about a year ago (may be 8-10 months?) my research on the net revealed that the problem is apparently the connector on the button pad board (part number 50H000380-30M-A). After serious tinkering and tweaking I finally got the (extremely sensitive) connector connected up so that the white screen issue actually dissapeared. However, since the connection was so delicate and so sensitive, I had to fix it in place with a hot glue. Hot glue actually added some thickness to it; given that there isn't much tolerance between the top of the connector and the cover, I needed to scrape away some plastic without putting a hole in it so it can accommodate the extra thickness, this is also required for the sliding function to be smooth.
However, right now I have 4 hermes, and I am faced with the same issue. On two units I have the white screen problem. After some intuitive testing I have found that the problem is not with the flex cable, nor with the connector on the flex cable, nor the connector on the button pad board. The problem is with the actual button pad board itself, as it contains fair bit of circuitry on board.
This is how I came to the conclusion. Since the white screen can be fixed with sensitive alignment of the connecor on the board, I wondered if it will display anything with that D-pad (button pad board) disconnected. On trial, it didn't display anything on both a functional unit and a unit with a white screen issue. From this I made the assumtion that the LCD initialisation sequence is contained on the button pad board (part number 50H000380-30M-A).
Having made this assumption, I thought since the symptoms of having it disconnected on a functional unit is the same with a unit that has the white screen symptom, I wondered if it will fix the white screen problem if I changed over the button pad board. On trial, I found that the white screen problem was a thing of the past. So, I don't know what on the button pad board actually causes the white screen, but it is DEFINITELY the board it self and not the connector.
PS: I don't know the proper names of the components but by the button pad board I am talking about is the board that lies under the front buttons of the unit that has the call, end call, start, ok...etc buttons.
uengin, u totally had make ur homework regarding the white-screen-issue.
Anyway, for me, I face the exact problem too. And my way is much simpler. When ever I face the white-screen problem (this cause by the high temperature, coz I notice it only happen when I put my 838 on my pocket while walking during sunny day), I simply turn off the screen for a while (by lightly pressing the power button), like 3-5 second, then turn on the screen back. And, voila~ it back to normal.
i get a white screen when i press on the plastic casing on the lower right side of the screen, above the right bar button. no temperature involved here. sending the hermes to sleep and waking it up restores the normal screen.
pcpc said:
i get a white screen when i press on the plastic casing on the lower right side of the screen, above the right bar button. no temperature involved here. sending the hermes to sleep and waking it up restores the normal screen.
Click to expand...
Click to collapse
There's actually a BGA chip in that vicinity on the button pad circuit board. It may or may not be that chip thats causing the issues, but I find it higly likely it is...
uengin said:
There's actually a BGA chip in that vicinity on the button pad circuit board. It may or may not be that chip thats causing the issues, but I find it higly likely it is...
Click to expand...
Click to collapse
if it is the chip, then this would be a loose soldering point?
would you recommend to handle the hermes with great care? eg. not putting it in my trouser pocket because oft the pressure?
pcpc said:
if it is the chip, then this would be a loose soldering point?
would you recommend to handle the hermes with great care? eg. not putting it in my trouser pocket because oft the pressure?
Click to expand...
Click to collapse
I doubt its a "loose" solder joint. It could be a dry joint. But then again you never know. However, the symptoms with the heating and cooling mentioned in the thread it could be one of the several devices on the button pad board failing due to heat.
As a general rule of thumb, definitely electronic devices of this calibre should be dealt with a level of care indeed.
nohanz said:
uengin, u totally had make ur homework regarding the white-screen-issue.
Anyway, for me, I face the exact problem too. And my way is much simpler. When ever I face the white-screen problem (this cause by the high temperature, coz I notice it only happen when I put my 838 on my pocket while walking during sunny day), I simply turn off the screen for a while (by lightly pressing the power button), like 3-5 second, then turn on the screen back. And, voila~ it back to normal.
Click to expand...
Click to collapse
Same for me which seems software issue but how to solve it
I'm having white screen problem too. I highly doubt it has anything to do with a cable because:
1) I almost never use keyboard, aka don't slide open the phone
2) lately white screen often happens when I touch a screen.
3) several times white screen got fixed by holding the phone next to aircondition outlet.
4) white screen recently started at the same time I've noticed that the battery started dying, it doesn't last as long as before. Before this battery I had another one, similar, and also never had white screen while that battery was new.
To conclude all this, at least in my case is more likely it's a battery issue and/or overheat. Tomorrow I'll use the original battery (I've replaced it with 3k mAh 2 years ago) this should proof me right or wrong.
My white screen issues started after a waist-high drop onto concrete, accompanied by the D-Pad and the surrounding buttons not working. In order to get the white screen to go away and the buttons to work again, I have a simple 2-step process:
Put the Hermes to sleep
Press hard right above the D-Pad/below the screen
When I wake the device up, it works just fine!
Interesting Find......
I just noticed something about my white screens.
IF the poweron led does NOT turn on then I get white screen when turning on my hermes.
If the poweron led turns ON(lights up) when turning my phone on then it won't white screen on me.

Battery won't charge, power button broken, me going crazy

Ok, im going to start not from the beginning beginning, but from where problems started.
Friday night, went out, I was writing an sms when somebody pushed me and i dropped my wiz, i picked it up, to find that the battery was gone, nowhere to be found, i did find the cover tho. i tried to look for the batt, but i was in the middle of the club so it wasn't that easy.. I knew that a friend of mine had a spare one so i didn't worry that much.
Sunday I got the replacement, tried it, no luck, it ran out i thought, but when i tried to charge it, nothing happened. Buying a new one is not that easy when you are in Argentina, and they are expensive, so i decided to jump sart it. good news: it worked, i could turn on the phone, so the battery is fine. bad news: it still doesn't want to charge!
I previously had problems with the usb, and i had to have it soldered again, pretty strong, but I thought that might be the problem again, so i disassembled my wiz. new problem: the power button broke, the tiny, tiny black piece fell off, AND I LOST IT! DOH!
Anyways, the usb is still soldered pretty strong, i don't think its gonna go loose again, so thats not the freaking problem!
So now, instead of the initial no-charge problem, i have a disassembled wizard, that won't charge the goddamn battery, AND a broken power button (tried to glue it, but fell off again and thats when i lost the piece).
Regarding the button, i've studied my options, what would you recommend and how would you do it?
option 1: turn on the phone with the soft reset hole, and remap the screen on/off function to another button.
option 2: replace the power button internal piece with the one from the voice command button (i never use it). i've taken a look and they seem to be the same, but i don't know if taking it off and soldering it back would work..
anyways, that leaves me again with my initial problem, and i do have an hypothesis. I THINK (because I THINK i remember this happening to me before), that the battery won't start charging until windows has started, and the jump star power the battery has is not enough to get it started (tried to tape it and leave it for a while to see if it charged a bit more, but didn't work, the phone turns on but goes out when loading, and since i've my wiz pretty loaded it takes its time to load).
So to try this out i would need a way to charge the battery manually, and i don't have access to another wiz to have it charged (my friend had a spare batt because his wiz is broken).
So, if you have a solution to this, ANY different solution, or even an IDEA, please give me a hint!
For what i've read, this are common problems, so there must be something out there.
Man, that's a bad thing
I'll try to help you as much as I can.
You are right about Wiz only start charging when it's on. After my N78 was stolen and I went back to the Wizard, the battery was without any charge for months... I plugged it and no red LED... Turned it on and, bingo, red LED and charging!
The voice command and the on/off buttons are the same, so (in theory) it would work 100% IF you were able to change their places (at least for me, it is impossible to do manually, never found any good equip here =\ )
With a lot of patience (and a small soldering iron) I would try to take the voice comm button off and place it where the on/off was.
For the battery, maybe someone here can point if there is a "battery charger" standalone device, or such a thing...
Good luck man
hey thanks for the quick reply!
i'm not thinking of doing it myself, i'm not not that precise nor is my solder, but i know a guy, same dude that fixed my usb. I like that idea more than the other, but i guess that remapping the screen on/off and using the soft reset button would be much safer.. i haven't made up my mind about that yet.
Weir thing about MY wiz, at least thats what i think happened to me last time my battery was completely discharged, is that not only the device must be ON for it to charge, but it needs to have WINDOWS already loaded, i know for most devices it's not like that, but i think thats how mine works, or at least thats the only explanation i could find!
btw, i love your case modding concept, and since i might have my wiz sitting for a while, i might go ahead and try something too! nothing as extreme as yours of course.. i'd love to see more updates on your project along with some guide to see what ideas i can take
slight detail while thinking my options.. if i was to remap the screen on/off function to another button, would i need to have the device in sync? or connected via cable? because when i had the usb soldered, don't know how nor why (all the pins seem to be ok) but the device won't be recognized by any computer, usb only works for charging (or used to work, at least, still haven't figured why it won't charge now).
If its only an app that i can load to the phone, once i have it working (that if i ever will), i can load the app thru minisd, BT or IrDa so that would't be a problem.. i haven's investigated that issue yet.
Hey jinxie, how's your Wizard?
If you're still stuck with the battery (I hope not), check this out...
I think this will solve your battery problem:
http://forum.xda-developers.com/showpost.php?p=4963547&postcount=5
That's probably to work, just be carefull with the battery's temperature. If it starts to heat, stop the process and wait it to get normal, then start again.
Good luck!
i tried keeping the wires attached to the contacts for a while, didn't think it'd work better doing it just for a little and then repeating the process, i'll try that!
yeap, i'm still stuck and i think i will be for a while, i have to solve the battery issue first (would be useless to do anything else if i'm not certain i will get it to work), then i have to decide what i am going to do with the power button, and then i might paint it, i'm thinking matte black, or maybe take some ideas from your project if you have made any progress at the time!
thanks for the tip, i'll try it today and i let you know how it went
development: phone DOES NOT turn on with the soft reset button as i thought, i was sure it did, but after jumping the bat once again, tried the wiring method (not repeating the jump start but wiring it directly to de device pins), and tried to turn it on with soft reset and dind't work, while it does turn on with the power button, wich is broken, so in order to turn it on i cannot have the phone assambled, wich means that in order to try to make it work, i will need to hold the battery attached with my hands, and it is a pain in the.. you know where.
update: i wired the charger i was using to jump start the battery to the pins in the wizard, then held the battery in place with my hand, with a small screwdriver i pushed the broken power button. wizard turned on, IT FINALLY LOADED WINDOWS, but don't rush, i then (with my MOUTH) connected the USB wall charger to the port in the phone, and removed the wiring, i was expecting the goddamn light to turn on and the screen to tell me that my phone was finally charging. I WAS WRONG. then i had to let go because my hand was killing me and it went off
and the damn thing refuses to charge! what could it be????????
2nd update: I AM MACGYVER !
i figured the wiring had given the bat enough power to load windows on its own, so tried once more holding everything together with my hand but without wiring the pins this time, and at last the amber light turned on!!! im so proud of myself lol
SO NOW: device works ok, charges ok, battery has enaugh power to load windows, WHAT CAN I DO ABOUT THE BROKEN POWER BUTTON? i know you can't remap the power function since its hardware, but the screen on/off function might be remapped. soft reset button DOES not turn on the phone, is there any other way of turning it on? or my only option is to take off the voice command button and soldering it where the power button should be?
well, found the little button part that was missing, glued it (yes, GLUED it), and it kinda worked, i had painted the casing already, so i assembled everything back again. i used a folded piece of paper to hold the button still so it won't fall again and i think it was too big cause now its kind of hard to press but i can live with that, what i cannot live with is NO SIGNAL.. i mean, CMON!! are you kiddin me? now that the button works, battery works, phone assembled, and now this?? when i dissassembled the phone i forgot to take out the sim card, so the metal parts that hold it opened a bit, but i pressed them back, the sim in no way loose, so i guess i might have screwed the attenna :S
i've just checked, i can see the sim contacts so... [CENSORED] !!!
also now the screen looks weird.. like if it had less colours, like when you format your pc and haven's installed the graphic drivers yet, 3d effects look funny..
Hey man, have you painted ALL the Wizard parts, on both sides?
'Cause there is one that has a piece of copper board inside. It makes contact with the antenna. Without that contact, you'll never have signal
The piece I'm talking about is the one that has the camera protection, saying "1.3 MP camera". Look at its back and see if there's no paint on a green and golden plate. Remove the paint if it got there (the golden part is the important one, since it makes contact with the antenna).
Good luck man!
hahah lol, no of course i didn't paint both sides! but anyways im gonna take it apart again, clean it, and try again..
done. it had some paintng yes, but they were very tiny spray drops, so i don't think that is, anyway i cleaned it. On the other hand, i found that the antenna is loose on the left side :S what can i do about it?

Help! My Repair Made Phone Worse!

Hi all, I was going to sell my HTC touch HD to a mate of mine and due to many scratches on the casing I purchased a new case & chassis. After following a guide on the internet, as I removed the screen I caught a small ribbon cable believed to be the light and pulled it slightly out of the clip. We replaced it and put the phone back together and it looks like we have broken the screen as you turn it on the phone vibrates but we get a small white blob near the end call button. It also appears the phone no longer charges although the amber light appears and you can turn the phone on. I think the phone was working because if you press the buttons the phone vibrates, but now nothing happens. Is my best bet to sell the phone as it is or shall I buy a new screen and attempt another repair? its £38 for a new one and I dont want to waste any more money.
Use a program like MyMobiler to check on your desktop pc that your device is working, and that you are sure the screen is faulty. If you really have broken it then a replacement is your only option.
http://www.mtux.com/
cheers thats a great idea.
Does anyone know about why I may be getting the charging problem? Is it because the ribbon inside the phone might not be earthed 100% as I removed the tape holding it down

Resurrect a dead M8, mate?

Hello,
I acquired an HTC one M9 to replace my dead M8 that I caused (funny story at the end). The headphone jack was wonky, and since I had disassembled and reassembled an iPhone 4S in the past I thought I could try my hand at this. The hardest part was getting the M8 out of its metal shell, and I think that's when I may have damaged something. I was able tot get it back together, but it will not power on.
I can plug it in to a charger and I see the screen come on showing that it charges and that there is a healthy power level to begin with. I can no longer find the plastic power button though, so I have to use a screwdriver tip or a spudger to press the sensor to turn it on. I've held it down for 30 seconds, 1 min, held it and the volume down button for the same amount of time, and tried the same with the volume up button, but no luck. I keep the shell off of it when I attempt to revive it, if that makes a difference (slightly easier to reach the power on button at the top). I can possibly put it back in the metal case and try to hold down all three buttons, but it's a ***** to get back out of the case.
I remember reading a few threads here or elsewhere regarding the ability to jump start a dead phone or android device, perhaps it was a Nexus 7. Is there anything like that in the development package or a standalone program where I can connect it via USB and jump start it that way? Or is it pretty much toast at this point? I see replacement power buttons and power button boards on eBay for under $20, but with my (lack of) skills I believe I'll just damage it more. What are your thought and what are my options?
(Funny story). I purchased my HTC One M8 from an eBay seller, yet when I got it, the power button was not on top but on the right. I'm thinking, "okay, didnt know I'll have to start looking for alternate M8 cases...". When I called Sprint to activate it and provided the information, they said it was actually an M9! So the reviews aren't as favorable towards the M9 as they are the M8, but I love it nonetheless. And of course if anything needs replaced I'm just going to take it to a brick-and-mortar shop to have them do it, save my spudgers for working on laptops.
Thank you for the help and advice!
emax4 said:
H
I can plug it in to a charger and I see the screen come on showing that it charges and that there is a healthy power level to begin with. I can no longer find the plastic power button though, so I have to use a screwdriver tip or a spudger to press the sensor to turn it on. I've held it down for 30 seconds, 1 min, held it and the volume down button for the same amount of time, and tried the same with the volume up button, but no luck. I keep the shell off of it when I attempt to revive it, if that makes a difference (slightly easier to reach the power on button at the top). I can possibly put it back in the metal case and try to hold down all three buttons, but it's a ***** to get back out of the case.
Click to expand...
Click to collapse
Unbelievable i pretty much have the same problem since yesterday.
Ok i try to write this as short as possible.
My Headphone Jack was also broken so i bought a new USB/HJ/MIC part.
After putting it in i wasnt able to load my phone anymore with the new piece so i tried back the original one with the dead HJ and it worked again. So i let it inside, contacted the seller to send me a new one. Which is not here yet, but he doesnt want the first one he sent me back, which is quite fortunate.
However yesterday i dropped my phone on high grass - it was completely dead so i couldnt call it using another phone thus i wasnt able to find it for like 1hour, it was dark, and very cold(-2°C) and also wet and i think this is how i broke my M8. But im not sure yet. I used a flashlight and apparently found it after some help of a friendly lady.
When i was back home it didnt start. Not even when charging. Then i thought myself i will try the new part again with the "broken" USB Jack and pretty funny it somehow works. BUT: Charging it turns on the screen instantly, gets me into recovery (always did that, never startet directly into CM13 which is use) but after like 15seconds it just turns off and starts again, showing me the dead battery icon at first, then the recovery. Im not able to turn it on using the power button (didnt loose mine ) it just turns it off because it starts by itself when chagrer is plugged in. I dont know what to do now: i dont have enough time inside my recovery (CWM) to reset it or something and im not really sure if it is a software or hardware problem but i speculated its the battery which is broken now. (?) However when i put the charger in to make it start, then pull it is able to hold itself for the same duration as if i was charging, but only sometimes. This really confuses me.
I dont think i broke mine during the repetetive change of the part, but im not able to exclude it in my troubleshooting. I know i didnt help you at all probably i just wanted to share my very same problem because no one else responded and i might also get help.

Categories

Resources