hi i have a Telstra S5360T which is currently locked to Telstra.
i have try universal GB root V25 and i can't get root access, it shows as it's being rooted but when i try unlocking with Galaxy Toolbox, it still says no root access.
i have tried super one click 2.3.3 and was frozen on the way, and i have try many version of update.zip and none of them are working.
does anyone has any idea how to unlock/root Aus Telstra version of S5360T?
Try this
http://forum.xda-developers.com/showthread.php?t=1044765
PHONE SLOW CLICK ME?
_____________________________________
"Waiting 4 s4......"- TingTingin"
A little help ...see attached.
ouch3 said:
hi i have a Telstra S5360T which is currently locked to Telstra.
i have try universal GB root V25 and i can't get root access, it shows as it's being rooted but when i try unlocking with Galaxy Toolbox, it still says no root access.
i have tried super one click 2.3.3 and was frozen on the way, and i have try many version of update.zip and none of them are working.
does anyone has any idea how to unlock/root Aus Telstra version of S5360T?
Click to expand...
Click to collapse
what i did the last time is installed different s5360T firmware then use universal root...hope it can help..
SGY S5360T 'root' solution
ouch3 said:
hi i have a Telstra S5360T which is currently locked to Telstra.
i have try universal GB root V25 and i can't get root access, it shows as it's being rooted but when i try unlocking with Galaxy Toolbox, it still says no root access.
i have tried super one click 2.3.3 and was frozen on the way, and i have try many version of update.zip and none of them are working.
does anyone has any idea how to unlock/root Aus Telstra version of S5360T?
Click to expand...
Click to collapse
Hi, I started off like you - tried many different methods on XDA and elsewhere - even hair pulling.
Firstly network 'unlocking' doesn't require 'root' access. Telstra will supply an 'unlock code' for free if your phone is over 2 years old. (Otherwise they may charge you to break contract) You give them IMEI number of your phone - they can give you code.
To open your Network Unlock screen – dial > #7465625*638*# on your handset and enter 'unlock code'.
I don't know if 'root' requires that handset is ' network unlocked'.
Anyway . .
Then I found this post - http://forum.xda-developers.com/showthread.php?t=1927769 - and by adopting method "3-Just(only)root:", and downloading the corresponding attached file - " 3-KERUK_Samsung_Root-only_signed.7z " I finally was successful in rooting my SGY GT S5360T (after weeks of frustration).
All credit and thanks to -CALIBAN666- for supplying the solution.
Incidently - my reason for attempting root was to try to properly unlock my phone to operate on Optus 3G (umts 900 MHz).
Although phone is network unlocked (unlock code supplied by Telstra), and the phone specs say it's 3G 900Mhz compatible, it is still not able to operate on that signal. I'm flummoxed. Would like to know, if you get your root, can your phone (S5360T) go 3G 900 MHz.
I suspect Telstra's firmware is holding out on me.
Good luck with it, hope this helps, and send thanks to -CALIBAN666-.
Related
Hey Guys
i've samsung Vibrant GT-I9000M from canada
it has froyo 2.2 , build number FROYO.UGKC1
i want to unlock it - sim unlock
i rooted it with superOneClick root
i cant get codes with SGS unlock tools , i tried many approaches but not yet !!!
any one successful method for this model ???
Thanks Alot
app SGS Unlock pro works for me, avail in market
I used the manual method of editing the nv_data.bin file as described here:
http://forum.xda-developers.com/showthread.php?t=761045
The SGS Unlock Pro app mentioned before is also in that thread, and does the same thing, but it is a paid app.
Good luck!
tarreq said:
Hey Guys
i've samsung Vibrant GT-I9000M from canada
it has froyo 2.2 , build number FROYO.UGKC1
i want to unlock it - sim unlock
i rooted it with superOneClick root
i cant get codes with SGS unlock tools , i tried many approaches but not yet !!!
any one successful method for this model ???
Thanks Alot
Click to expand...
Click to collapse
Just wanting to let you know that there is more than likely a Gingerbread (Android 2.3.3) firmware update for your phone.
If interested then there is more information in this thread:
http://forum.xda-developers.com/showthread.php?t=1211939
[I9000M] UGKG3 Available on Kies
Sent from my GT-I9000M using XDA Premium App
thx Guys ,,
i tried SGS unlock from market but it shows unlock code as : null !!!
also i tried manually search and edit nv_data.bin but i ddnt find it and find bml3.bak
(as other methods says) also tried to search it for SSNV but no success!!
whats is the guranteed methid even if it possible to get back to 2.1 !!
please help me
note: (phone doesnt ask for code when i insert another SIM !!)
Buy the SGS Unlocker from market author Degantboy or something like that.. the paid version 100% works on my phone.... it use to show me unlock code on 2.1 but not 2.2+ but still unlocks my phone.
Run the unlock procedure, reboot phone, shut phone off, place in new sim card, power up phone, if the phone isn't unlocked re-run app with new SIM card and reboot, voila should fix your problem.
Your phone needs to be rooted. and the free versions don't work for me.
you can always just buy the unlock code to unlock the sim restriction.
http://unlockcellphonecode.com/code-for-unlocking-samsung-cell-phone
worked for me.
While we're on this topic, I used one of the free apps back when I had 2.1 to get the unlock code.
I've never used it, but I have the code saved. Now that I have updated to 2.2 and then 2.3, would the code still work?
Hmm another factor is that I must have done that before I had the phone repaired (as the repaired one came back with 2.2). I wonder if whatever board they replaced will have a different unlock code? I guess it might be based on the IMEI? Not sure if that changed or not...
Nv data hex edit. Change a 1 to 0, and permanent unlock. search for instructions, they are on this forum and search really isn't that hard to use.
Sent from my GT-I9000 using xda premium
Guys, once the Bell SGS is unlocked, which networks can it run on? I'm specifically interested in Wind. Can it run on AWS/1700?
Sorry for the slight hi-jack but I can't find accurate info anywhere.
yokocar said:
Guys, once the Bell SGS is unlocked, which networks can it run on? I'm specifically interested in Wind. Can it run on AWS/1700?
Sorry for the slight hi-jack but I can't find accurate info anywhere.
Click to expand...
Click to collapse
You must get confused by the T-mobile Vibrant when searching for information. The Bell SGS does not have band 1700, as such, it will not work on Wind. The T-Mobile Samsung Vibrant includes 1700 but does not have band 850/1900.
I used superoneclick to root then purchased SGS Unlock Pro. When I upgraded to GB via Kies, the unlock remained. I had used the app that got the unlock code but when I re-locked my device, the code stopped working.
found that the free version of SGS Unlocker
(Samsung Galaxy S Unlock Tool DaGentooBoy)
and Galaxy S Unlock (by Helroz) don't unlock the i9000m running android 2.3.3
(superoneclick was used for rooting)
sorry couldn't post links
SaxGuyTy said:
found that the free version of SGS Unlocker
(Samsung Galaxy S Unlock Tool DaGentooBoy)
and Galaxy S Unlock (by Helroz) don't unlock the i9000m running android 2.3.3
(superoneclick was used for rooting)
sorry couldn't post links
Click to expand...
Click to collapse
I have used Galaxy S Unlock by Helroz, however in order for it to work, you may have to install/upgrade busybox.
I found the easiest way to do this was to superoneclick, then install titanium backup and make sure it has root access. Then upgrade busybox from within. Then you can use the Galaxy S Unlock to unlock.
i did this on my newer phone, and also on my family member's Galaxy S2 from Bell.
altering nv_data.bin might end in total imei lose if you corrupt it
and please do not pay or purchase full apps to unlock your device !!!!
http://forum.xda-developers.com/showthread.php?t=1360174
ordio said:
I have used Galaxy S Unlock by Helroz, however in order for it to work, you may have to install/upgrade busybox.
I found the easiest way to do this was to superoneclick, then install titanium backup and make sure it has root access. Then upgrade busybox from within. Then you can use the Galaxy S Unlock to unlock.
i did this on my newer phone, and also on my family member's Galaxy S2 from Bell.
Click to expand...
Click to collapse
I also have a Canadian Bell GS2 with CM9, root, busybox... I'm trying to put a Rogers sim card in it.
I have tried both the Galaxy S Unlock as well as the Galaxy unlock app from Herloz unsuccessfully...
I have tried to run the unlock code generator by feeding it the nv_data.bin, but my GPU is not supported, and I'm not exactly keen on messing up my EFS files.
I was wondering if you guys had any suggestions for me?
Perhaps I could have you guys run the tool with the attached nv_data.bin?
Much appreciated.
Hello guys,
Does anyone work on unlocking the new Region Lock for i9500 ?
I know some work being done for note3, but what about s4 ?
I'm stuck with a US locked i9500 (outside of US). The "activation" with US sim did not work (it worked in US but once i'm abroad it is locked, but even here works with american sim). I can test things on my phone / provide logs if needed.
thanks,
Im actually also having the same problem. I even tried unlocking through code and using apps,didnt work for me
maybe this works
I haven't tried but you can check these methods.
1. I heard that root is needed together with the app like region lock away.apk by chainfire
2. Further, it seems that purchasing a SIM unlock code not only unlocks the device’s SIM, but also its region.
3. With root explorer navigate to system/csc/customer.xml*file (if you can)
It will contain list of Network Lock fields including one for your country MCC for e.g for Thiland it's MCC is (520) and China MCC (460).You can find your country mcc by googling.
Thailand NetworkLock field in CSC file might look like:*<NetworkLock>520BB</NetworkLock>.
China NetworkLock field in CSC file might look like:*<NetworkLock>460BB</NetworkLock>.
This would help understand what might be the reason for the change in lock state whether it is a change in the regional NetworkLock list in the CSC .
Find your country in which you are in respective mcc code and search in the xml file if you find it delete that mcc code line and save it. But please don't forget to make backup in case if it doesn't work
Tell me if it works otherwise some other person will surely help you guys.
alifarrukhsss said:
I haven't tried but you can check these methods.
1. I heard that root is needed together with the app like region lock away.apk by chainfire
2. Further, it seems that purchasing a SIM unlock code not only unlocks the device’s SIM, but also its region.
3. With root explorer navigate to system/csc/customer.xml*file (if you can)
Click to expand...
Click to collapse
1. Tried the RegionAway app v1.3 by chainfire. it was sucessfull but nothing changed. it is still locked. ( the app is designed for note3 as far as i understand)
2. i've heard about many who tried their luck with purchasing codes - it does not work. Also confirmed with unlocksamsungonline.com it wont help
3. my customer.xml does not contain the string "lock". This is probably because i've downloaded and flashed an official version of my local firmware. (thought maybe it will unlock) - it didnt. Also tried to flash older modems - or it does not work completely or still locked.
Also got a comment from unlocksamsungonline.com that "I9500 is Andriod1 model with new EFSv2 security" and is a problem ....
locked
MadCat108 said:
1. Tried the RegionAway app v1.3 by chainfire. it was sucessfull but nothing changed. it is still locked. ( the app is designed for note3 as far as i understand)
2. i've heard about many who tried their luck with purchasing codes - it does not work. Also confirmed with unlocksamsungonline.com it wont help
3. my customer.xml does not contain the string "lock". This is probably because i've downloaded and flashed an official version of my local firmware. (thought maybe it will unlock) - it didnt. Also tried to flash older modems - or it does not work completely or still locked.
Also got a comment from unlocksamsungonline.com that "I9500 is Andriod1 model with new EFSv2 security" and is a problem ....
Click to expand...
Click to collapse
Deleted
Any luck??
I have an S4 GT-I9500 from Colombia, manufactured in Korea, haven't rooted the phone yet, looking for anyone who has region unlocked their phone. Can't unlock from service mode as UMTS is limited. Help Needed desperately
innov8ed said:
I have an S4 GT-I9500 from Colombia, manufactured in Korea, haven't rooted the phone yet, looking for anyone who has region unlocked their phone. Can't unlock from service mode as UMTS is limited. Help Needed desperately
Click to expand...
Click to collapse
Eventually i found a guy with Z3X box and he unlocked it in 3min by pushing "Unlock" button on his laptop
I've been trying to fix since installing the new update at 2pm (PST) today. Finally decided to post a question here hoping someone more knowledgeable can help me fix it.
I bought the phone and it was locked to Bell so I bought a code and was using it on Fido. I flashed the Telcel 4.4.2 update and after I flashed all the files it worked (I tried not flashing modem). When it started I got a screen that said "Network Lock" with only a dismiss button (i.e. nowhere to put re-input my unlock code). If I click it 3 times it lets me into device. In the status bar it says "Invalid SIM card" "Network locked SIM card inserted". When I try to make a call I get "Not registered on network"
I've also tried flashing my old modem.bin via ODIN but that just cause the phone to boot and vibrate a bunch. I was able to get into settings but no option for Network Operator or APN.
The network doesn't work but WiFi and everything else does. So I rooted using the new N9005 root. Added APN settings, and of course, looked for network operators. Fido doesn't show up but all other carriers do (except Chatr).
I'm in the same situation as you are but which new N9005 root are you talking about? I'm on Rogers so if I can use that to get my signal back, that would be awesome.
zerojay said:
I'm in the same situation as you are but which new N9005 root are you talking about? I'm on Rogers so if I can use that to get my signal back, that would be awesome.
Click to expand...
Click to collapse
Here>> https://plus.google.com/+Chainfire/posts/QbVy3arpymx
Please post back if you find anything. I've been looking all day and I've given up for the night.
Don't forget to say thanks
JamesKroll said:
Here>> https://plus.google.com/+Chainfire/posts/QbVy3arpymx
Please post back if you find anything. I've been looking all day and I've given up for the night.
Don't forget to say thanks
Click to expand...
Click to collapse
I got the autoroot installed and working fine. It says invalid SIM.
Previously, I had installed the firmware without flashing the CSC and I don't remember having sim lock issues then (as the Telcel specific files are not flashed) however you have to deal with the Samsung keyboard repeatedly crashing, so you have to find a way around it.
So my suggestion is reflash without the CSC file and brainstorm a way to put another keyboard on it without needing to input anything first (so Google Play is a no-go), probably side load a keyboard apk through ADB or something. Going to give it a shot.
---
The keyboard idea worked fine. Unfortunately I did still get the region/sim lock stuff because everywhere outside of Canada seems to have it turned on and the ROM defaults to tmobile without the CSC apparently. I've decided to bite the bullet and just pay for an unlock as I was planning to do so anyways.
---
And that worked until I rebooted and it asked for a SIM unlock code... well... damn. I'm just going to try to flash a rom with region/sim locking removed. Ugh.
Looks like we can fix this by downgrading or creating our own Rogers files: http://forum.xda-developers.com/showthread.php?t=2608178&page=54
I have the CSC and modem.bin. Tested and working (remember, I flashed PIT as said here http://forum.xda-developers.com/showpost.php?p=49512809)
https://www.mediafire.com/?yjdgd4j8s72bo46
I rolled my own too. Working fine.
Sent from my SM-N900W8 using Tapatalk
hi i just found this thread, i have a rogers note 3, unlocked to virgin, i just flashed the mexican rom. it was working the first time but i messed something up so i had to reflash it, and on this second flash it now says region locked sim. and heres the bad news. the original unlock code IS NOT WORKING ANYMORE. wtf do i do now?
evil-doer said:
hi i just found this thread, i have a rogers note 3, unlocked to virgin, i just flashed the mexican rom. it was working the first time but i messed something up so i had to reflash it, and on this second flash it now says region locked sim. and heres the bad news. the original unlock code IS NOT WORKING ANYMORE. wtf do i do now?
Click to expand...
Click to collapse
Same thing was happening to me. Just follow the instructions in my previous post.
I337M bell running 4.3 need help or direction to sim unlock
Am trying to unlock the Sim for the SGH I337M under bell.
I was able to Unlock the device using chainfire and install TWRP
stuff i have checked using the method *#0011# dosent help as te serive is limted on my device.
most likely i need to flash another radio rom and then unlock it.
tested the one MDL Radio this didnt help either. Odin failed flashing it .
Not sure if any one can direct me to a radio i can flash then unlock.
Thanks
Note:Yes i have searched the forum and looked around (only for you smart pants)
marakji said:
I337M bell running 4.3 need help or direction to sim unlock
Am trying to unlock the Sim for the SGH I337M under bell.
I was able to Unlock the device using chainfire and install TWRP
stuff i have checked using the method *#0011# dosent help as te serive is limted on my device.
most likely i need to flash another radio rom and then unlock it.
tested the one MDL Radio this didnt help either. Odin failed flashing it .
Not sure if any one can direct me to a radio i can flash then unlock.
Thanks
Note:Yes i have searched the forum and looked around (only for you smart pants)
Click to expand...
Click to collapse
To be honest... I don't think it is possible on 4.3 not for free anyhow... limited service is probably because you started out with MK6 modem right? If you really want to unlock it.... try one of the web services talked about in the s4 forum or take it to one of those places in the mall.... they usually charge about $20.... you can pooch the phone if you do it wrong or so they say in lots of the unlock threads....
Besides, the MDL / MK2 type unlocks are for the AT&T versions of the phone (i337), not the Bell Canadian version (i337m).
To do the unlock, I recommend CellUnlocker.net - it cost me 25 USD (now worth about 30 CAD), but they got me the code in a couple of hours, and I plugged it in no problem using a non-Rogers sim.
Am wondering maybe i can use a radio i can flash it with it unlock it and then flash the stock radio rom.
i have did this before on the SGH 2 long time ago.
i remember i had tp downgrade to ICS then flash the custom radio than do the ##0011# trick .
not sure why we cant do this here ????? i can flash another rom on the device i dont see why not i have rooted and TWRP installed on it so its ready for some changes .
Thanks for the advise about the (mall/cellunlock) i might use it as the last resource but for now am playing with this phone i have to figure it out i guess its kinda challenge.
marakji said:
Am wondering maybe i can use a radio i can flash it with it unlock it and then flash the stock radio rom.
i have did this before on the SGH 2 long time ago.
i remember i had tp downgrade to ICS then flash the custom radio than do the ##0011# trick .
not sure why we cant do this here ????? i can flash another rom on the device i dont see why not i have rooted and TWRP installed on it so its ready for some changes .
Thanks for the advise about the (mall/cellunlock) i might use it as the last resource but for now am playing with this phone i have to figure it out i guess its kinda challenge.
Click to expand...
Click to collapse
I have the exact same phone. I was able to SIM unlock on 4.2.2 using this video, and flash the modem to enable the AWS frequency for Wind and such. Though this was back with the MDJ modem. I do not think this is possible with the MK6 modem.
marakji said:
Am wondering maybe i can use a radio i can flash it with it unlock it and then flash the stock radio rom.
i have did this before on the SGH 2 long time ago.
i remember i had tp downgrade to ICS then flash the custom radio than do the ##0011# trick .
not sure why we cant do this here ????? i can flash another rom on the device i dont see why not i have rooted and TWRP installed on it so its ready for some changes .
Thanks for the advise about the (mall/cellunlock) i might use it as the last resource but for now am playing with this phone i have to figure it out i guess its kinda challenge.
Click to expand...
Click to collapse
That is what I suggested to someone in post#14 in this thread: http://forum.xda-developers.com/showthread.php?t=2619239&page=2
He never posted as to whether it worked.
Hello guys, I have been going madness today trying to unlock my gf's Telcel Mexico Galaxy S4 i337m.
I initially tried from the stock branded rom but I couldn't pass the first page in *#0011#. So I decided to debrand it using a Samsung stock fw I337MVLUEMK6.
Unfortunately even with the debranded rom I have gotten the same result, unable pass the first page in *#0011# no matter how many times I would hit back, and the option 1 or whatever makes no difference.
At that point I stumbled upon this thread and I decided to give it a shot, however no go with this method either, probably wasn't even the point of my situation.
So at this point my questions are, is there another method beside buying an unlock code to get this phone unlocked? If anyone of you who has had luck unlocking the phone with this method would pass me it's HiddenMenu.apk, would it work if I sideload it onto my gf's S4?
Thanks
Any help??
Segnale007 said:
Hello guys, I have been going madness today trying to unlock my gf's Telcel Mexico Galaxy S4 i337m.
I initially tried from the stock branded rom but I couldn't pass the first page in *#0011#. So I decided to debrand it using a Samsung stock fw I337MVLUEMK6.
Unfortunately even with the debranded rom I have gotten the same result, unable pass the first page in *#0011# no matter how many times I would hit back, and the option 1 or whatever makes no difference.
At that point I stumbled upon this thread and I decided to give it a shot, however no go with this method either, probably wasn't even the point of my situation.
So at this point my questions are, is there another method beside buying an unlock code to get this phone unlocked? If anyone of you who has had luck unlocking the phone with this method would pass me it's HiddenMenu.apk, would it work if I sideload it onto my gf's S4?
Thanks
Click to expand...
Click to collapse
You have to flash an earlier modem to either let you get to the hidden menu or that will work with an app called RegionLock Away. AFAIK that's the only way to do it. Do a search, some people have asked and figured it out but i have the I337 so it's different for me.
DeadlySin9 said:
You have to flash an earlier modem to either let you get to the hidden menu or that will work with an app called RegionLock Away. AFAIK that's the only way to do it. Do a search, some people have asked and figured it out but i have the I337 so it's different for me.
Click to expand...
Click to collapse
Thank you for the answer.. I had somehow figured that out but I wasn't sure. On to this thread it is stated that they have achieved to successfully unlock their S4's through Hidden Service Menu with the MF3 OTA fw.
At this point my question is, can I go with the modem_CWM_I337UCUAMF3.zip(7/9/2013)(US) baseband found on this thread and flashing it over the stock fw I337MVLUEMK6 ?
As far as I know the modem_CWM_I337UCUAMF3.zip(7/9/2013)(US) baseband is a 4.2.2 while I337MVLUEMK6 is a 4.3 version, so I just want to make sure it won't brick the device.
Apart from that, the two phones should be identical right? Like I said this one is a i337m Telcel one from Mexico, while modem_CWM_I337UCUAMF3.zip(7/9/2013)(US) should be AT&T right?
Thanks
Segnale007 said:
Thank you for the answer.. I had somehow figured that out but I wasn't sure. On to this thread it is stated that they have achieved to successfully unlock their S4's through Hidden Service Menu with the MF3 OTA fw.
At this point my question is, can I go with the modem_CWM_I337UCUAMF3.zip(7/9/2013)(US) baseband found on this thread and flashing it over the stock fw I337MVLUEMK6 ?
As far as I know the modem_CWM_I337UCUAMF3.zip(7/9/2013)(US) baseband is a 4.2.2 while I337MVLUEMK6 is a 4.3 version, so I just want to make sure it won't brick the device.
Apart from that, the two phones should be identical right? Like I said this one is a i337m Telcel one from Mexico, while modem_CWM_I337UCUAMF3.zip(7/9/2013)(US) should be AT&T right?
Thanks
Click to expand...
Click to collapse
You can't flash that one, but you should be able to flash one of older ones. You are right in that that modem is for the AT&T one, and that means it actually won't work for you. You'll have to flash one that has I337M instead of I337U. Besides that, you should be good.
DeadlySin9 said:
You can't flash that one, but you should be able to flash one of older ones. You are right in that that modem is for the AT&T one, and that means it actually won't work for you. You'll have to flash one that has I337M instead of I337U. Besides that, you should be good.
Click to expand...
Click to collapse
Thanks for your reply once again.. In fact as you have said I tried the I337U AT&T version and obviously I didn't have any GSM/UMTS signal, so I went with the modem_CWM_I337MUMUAMDL.zip{5/30/2013}(Mexico) and I can finally get into the Services Menu, I can do the whole unlock process listed here, however once the phone reboots the result is the same, S4 doesn't read any different simcard beside the one it is locked on, which is Telcel.
Any idea? Is there a specific baseband version that does this trick on i337m? Additionally, is there a website where I can find all kinds of baseband versions for the i337m?
Thanks
hidden menu 0011 on MDL
hi to all, this is my first post,
a few min ago i unlock my gs4 by this CODE *#0011#.
the phone is ranning stock 4.3.
baseband I337MUMUAMDB2
build number I337MUMUEMK6
first the code doesnt work, but searching and searching and searching and searching and searching and searching and .
I got something only the telcel baseband MDL I think.
i flash it by odin but the first baseband doesnt change!!!!!! WTF....
flash it by CWM and again the first baseband doesnt change!!!!!! WTF.... AGAIN. I thought im in trouble because 350$ .
but but but, god help me to try to put in the code again *#0011#....
and WTF its work yeahhhhhhhhhhhhhhhhhhh ...
so maybe this will work for you too.... thanks to all.
GOD HELP YOU
I337m Telcel
Segnale007 said:
Hello guys, I have been going madness today trying to unlock my gf's Telcel Mexico Galaxy S4 i337m.
I initially tried from the stock branded rom but I couldn't pass the first page in *#0011#. So I decided to debrand it using a Samsung stock fw I337MVLUEMK6.
Unfortunately even with the debranded rom I have gotten the same result, unable pass the first page in *#0011# no matter how many times I would hit back, and the option 1 or whatever makes no difference.
At that point I stumbled upon this thread and I decided to give it a shot, however no go with this method either, probably wasn't even the point of my situation.
So at this point my questions are, is there another method beside buying an unlock code to get this phone unlocked? If anyone of you who has had luck unlocking the phone with this method would pass me it's HiddenMenu.apk, would it work if I sideload it onto my gf's S4?
Thanks
Click to expand...
Click to collapse
Hi, im from Tijuana i also have that smartPhone and was having the same problem, what i did and it worked for me was to install this firmware
http://www.sammobile.com/firmwares/3/?download=27549
From sammobile it is the Telcel oficial with JB 4.3 then i put my Movistar chip and it work..
Saludos...
Yeah, there's a new firmware from samsung that unlocks phones by default.
I've tested it with that exact same one.
http://www.sammobile.com/firmwares/3/?download=27549
Click to expand...
Click to collapse
I did a previous downgrade to 4.2 tho.
Using that 4.2 firmware, and the *#0011# code, didn't work for me.
So, I returned to the stock branded 4.3, placed a Movistar SIM, and boom! unlocked.
Didn't work too good because of the ugly 4.3 Telcel branded firmware, but at least it's unlocked.
After that I decided to install Goldeneye ROM, and the phone was carrier locked again.
The developer told me that a proper unlock method would be needed to achieve unlocking.
I managed to make a nandroid backup of Telcel's firmware, and Goldeneye ROM, and:
- inserted SIM different from telcel to the phone, booted into Telcel's firmware a couple of times and got it working
- flashed the Goldeneye ROM and retained the unlocking.
the only thing is:
if you ever place a Telcel SIM, the lock will return.
So far I've managed to keep it working once (2 full weeks) without problems.
Yesterday I tried to do it again, and every once in a while the SIM lock returns.
-------------
In other news, anyone knows how to flash other ROM than Telcel's and that buggy 4.2 I found?
Every single ROM I try to flash through ODIN gives me an error, and won't let me flash.
I've tried all these with no results:
I337MUMUENB1_I337MUUBENC1_TTT.zip
I9505XXUENAA_I9505YXXENA7_PHE.zip <--- thankfully that didn't let me flash, it was for a 9505 ::V
I337MVLUAMG1_I337MOYAAMG1_BMC.zip
I337MVLUEMK6_I337MOYAEMK6_PCM.zip
I337MVLUEMK6_I337MOYAEMK6_SPC.zip
Segnale007 said:
Hello guys, I have been going madness today trying to unlock my gf's Telcel Mexico Galaxy S4 i337m.
I initially tried from the stock branded rom but I couldn't pass the first page in *#0011#. So I decided to debrand it using a Samsung stock fw I337MVLUEMK6.
Unfortunately even with the debranded rom I have gotten the same result, unable pass the first page in *#0011# no matter how many times I would hit back, and the option 1 or whatever makes no difference.
At that point I stumbled upon this thread and I decided to give it a shot, however no go with this method either, probably wasn't even the point of my situation.
So at this point my questions are, is there another method beside buying an unlock code to get this phone unlocked? If anyone of you who has had luck unlocking the phone with this method would pass me it's HiddenMenu.apk, would it work if I sideload it onto my gf's S4?
Thanks
Click to expand...
Click to collapse
With stock ROM 4.4.2 Telcel I've been able to..