Hi guys,
I need to download the Xperia pro MK16 electrical schematics and components placing from
http://www.sonyericsson-world.com/files/category/1207-2011/
However, I registered and was not able to access to forum. Anyone can help with it? Needa figure out a good solder point for the wireless induction charging mod!!!
Any kind soul can download and attach here?
Let's make an easy mod for the powermat Xperia PRO!!!
Related
I know this isn't the best place but I'm wondering if any of you can point me in the right direction. My headphone jack is loose, I have to hold my headphones in to keep it playing in both speakers. The headphones work fine in every other device. I want to solder the jack back into place as I imagine that's its problem.
Does anyone have experience doing this or have a link to a schematic of this inside of a desire z?
Thanks in advance.
Sent from my Nexus 7 using xda app-developers app
You won't need any schematics. You just need to know how to disassemble the device and you will see how u should solder the adapter
Hello!
I have a blade vec 4g with not charging problem, it is a problem in board.
So please if anyone has a hardware bridge solution, or service manual, or at lease a high resolution image of the board focusing on the battery connector.
i need it to try to determine parts on board.
Thank you.
Hi i have problem with my Leeco Le pro 3. Phone is working but no charging. I can smell like smoke from usb port. I found on aliexpress new charging port. Is this is easy to repair? In service they want to much money for repair. Is it possible repair this by my self?
As long as the port isn't soldered to the motherboard. IDK if it is or not. You'll have to search for teardown videos or images of the phone's disassembly. If you're lucky the setup might be the exact same as the Le 2's, which does have disassembly guides. If it doesn't, you're pretty much SOL because I can't find any teardown videos of the Pro3. You can replace the Le 2's charging port (its flex cable is under the battery)
sk8223 said:
As long as the port isn't soldered to the motherboard. IDK if it is or not. You'll have to search for teardown videos or images of the phone's disassembly. If you're lucky the setup might be the exact same as the Le 2's, which does have disassembly guides. If it doesn't, you're pretty much SOL because I can't find any teardown videos of the Pro3. You can replace the Le 2's charging port (its flex cable is under the battery)
Click to expand...
Click to collapse
Litterally the first link on google....
http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/
@op yeah, the usb port sits on a separate board, look @ the site I linked..
I found this board but without vibration motor and speakers. So i must apply this from old board to new?
Quadzik21 said:
I found this board but without vibration motor and speakers. So i must apply this from old board to new?
Click to expand...
Click to collapse
Yup. Doesnt seem to be difficult, it's all on connectors (look @ the pics on aliexpress), only the small circular object (vibration motor? microphone? dunno) needs to have its + and - wires soldered on.
trizex said:
Litterally the first link on google....
http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/
@op yeah, the usb port sits on a separate board, look @ the site I linked..
Click to expand...
Click to collapse
Oh lol. I was looking on Youtube. And that's great, good news for anyone who needs to open the phone up!
Quadzik21 said:
I found this board but without vibration motor and speakers. So i must apply this from old board to new?
Click to expand...
Click to collapse
Which one did you buy? Link?
I can't send link. Enter le pro 3 charging board on aliexpress and this is first one with 19 orders.
i had to take apart the s5 to replace the usb port of the s5, you basically need to completely take it apart to replace usb daughter board.
replacement daughter board was doa, sheesh.
instead of ordering a new one i de-soldered the actual usb port from the replacement board to swap it out with the broken port on the original daughter board but that procedure is not shown in this vid.
Youtube Link
.
vincom said:
i had to take apart the s5 to replace the usb port of the s5,......
Click to expand...
Click to collapse
Your looking for a YouTube video on how to Microsolder the S5 USB 3.0 Charging Port?
This is a very challenging and delicate procedure but, not an impossible one for a skilled individual (moderate to advanced).
I've done Microsoldering on a handful of occasions through the years and I, personally, try to avoid performing this if at all possible.
I do agree that it's a challenge to locate a video for doing this on a USB 3.0 Charging Port but, I did locate one that was performed on a USB 2.0 Charging Port.
The two ports are different but, the procedure and concept are the same.
https://www.youtube.com/watch?v=jGZKsuaJlpo
This is the best that I can locate that I feel would be a great example in performing this task. If it were not, then I would never provide it to you.
I do wish you the best of luck and hopefully see your (brief LOL!) success story.
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
vincom said:
i had to take apart the s5 to replace the usb port of the s5
Click to expand...
Click to collapse
Not bad.
Pay attention to this item: https://www.ebay.com/itm/253072893614
i have de-soldered the s5 usb port. u need flux and a heat source w/air. is it easy, if u have the correct tools then its sort of easy for a newb to soldering.
having a proper de-soldering heat gun station would be nice but i used a heat gun used for crafts, gets plenty hot but mouth is too wide, was going to use foil to wrap the end of mouth to decrease its diameter but didnt get around to doing it.
the small heat gun is shown in the beginning of the vid posted used to heat up the lcd adhesive.
kapton tape to protect surrounding areas would be nice to have, i didnt have any.
i did video tape it just have not edited it yet to upload.
I've had the Ticwatch Pro for a few months now and the only thing missing is some way of wireless charging....
I was thinking, since there's a sort of bump underneath it, where the heartrate monitor lies, and knowing where the speaker grill is, there surely must be a way to add a 3d printed device with some small magnets that can act as a holder for a qi coil...
Alternatively, there must be a way to add a a watchstrap with some solar cells (even if it's DIY) with the input to the pogo pin connectors under the watch itself...
Along that second idea, I saw these cells:
https://www.amazon.com/Powerfilm-Flexible-Solar-Panel-MP3-25/dp/B002MF2XCO
Any thoughts?
Ciao
Did you done some steps forward on this idea ?
Nope... still looking....
Good luck !!
I am waiting for my nw TICWATCH pro ... just now bought
I still haven't found anything but I can't believe it's that difficult (at least in my mind)
I just had a vision... I have a semi broken (aesthetics mainly I believe) Moto 360 1st edition which has a charging Qi coil inside it. (https://www.youtube.com/watch?v=NIVJb5Q_IHg)
Any idea if I can just rip it out of the Moto and somehow solder it into the Ticwatch? Both devices out of warranty by now anyways....
danielccm said:
I just had a vision... I have a semi broken (aesthetics mainly I believe) Moto 360 1st edition which has a charging Qi coil inside it. (https://www.youtube.com/watch?v=NIVJb5Q_IHg)
Any idea if I can just rip it out of the Moto and somehow solder it into the Ticwatch? Both devices out of warranty by now anyways....
Click to expand...
Click to collapse
Did you end up doing it?
Nope, haven't got the guts or knowledge to do it...
Sent from my SM-T825 using Tapatalk