Related
Hi hackers,
i know about the common method described by chulri, to compile custom kernels and it works well.
Anyway for kernel only experiments this way is little too bloated.
EDIT3:
So here's my standalone toolchain for archos (build with modified buildroot system for 32Bit linux OS):
arm-archos GCC4.4.1 for ARM uClinux (uClibc C library 0.9.30 with Archos specific tweaks and bugfixes)
http://dl.dropbox.com/u/8815400/arm-archos.tar.gz
EDIT5:
The toolchain does not work on a 64Bit OS.
I'll post a link for the 64Bit version soon.
Only for reference:
There are a lot of external solutions to be found in the web.
E.g. there are different flavoured toolchains based on gcc 4.4.1 from Mentor Graphics (formerly known as Codesourcery):
Sourcery G++ Lite 2010q1-188 for ARM EABI (Newlib C library 1.17.0)
Sourcery G++ Lite 2010q1-189 for ARM uClinux (uClibc C library 0.9.30)
Sourcery G++ Lite 2010q1-202 for ARM GNU/Linux (GNU C library 2.11)
So if i restrict my activities on kernel compilation all three should do the job.
I made a custom kernel using the above mentioned GNU C toolchain, all compiles fine, but did not test it yet.
This is next... i need to find an easy way to test my tweaked kernels.
So far i would recommend UrukDroid running and use the recovery menu to exchange the kernel & ramdisk.
Any comments are welcome.
Unfortunately our devices use also some binary only kernel modules which are not supported by this method:
hmditx.ko (though marked as GPL, we got no sources)
hdmicec.ko (same here)
UPDATE: Sources had been published by Archos at gitorious.
nwolc.ko (proprietary module from NXP)
BTW, someone should contact the author Andre Lepine to hand out the GPL'ed source code
If i got it right, all custom kernels had been build using the buildroot system because of these.
AFAIK using another toolchain would result in a completely different system map and prevent the modules to load.
Anyway if we exclude HDMI and tweak some start scripts to prevent the modules to get loaded, we'll be fine.
Would be nice to start some discussion up here or leave a comment.
I'd also like to get some tricks form the cracks
EDIT:
Sure there's also Ti's wireless driver package which has to be integrated to compile tiwlan_drv.ko.
Need to do some research to find the correct package.
Any hints are welcome!
EDIT2:
Anyone tried to compile a gen8 kernel using the new gen9 kernel source?
Everything seems to be there...
EDIT4:
See above! The toolchain works very nice.
It had been specially compiled for external use and in the meantime it was tested on many different hosts.
Instructions how to install and use it could be found here:
http://forum.xda-developers.com/showpost.php?p=19134490&postcount=8
Thanks a lot for your attention!
Regards,
scholbert
One question: What's so much better about that toolchain to throw away the Archos-compatible toolchain and deal with the hassle of excluding features to build compatible binaries? I guess I didn't get the point
chulri said:
One question: What's so much better about that toolchain to throw away the Archos-compatible toolchain and deal with the hassle of excluding features to build compatible binaries? I guess I didn't get the point
Click to expand...
Click to collapse
Like i tried to point out:
Anyway for kernel only experiments this way is little too bloated.
Click to expand...
Click to collapse
A neat little cross toolchain environment would be enough for kernel experiments.
I'm working on different platforms e.g. old Debian 4.0 workstation, Netbook with UNR 11 but limited space, other linux machines i don't like to run entire process.
You need a lot of disk space and time (at least first time to build the whole environment).
The other thing is that everything is built into the buildroot structure, you could barely locate the toolchain itself...
Sure your right, if you say everthing works out of the box, but i don't like all these automated procedures, to build my own kernel.
In fact that's just it and i wonder if there's another way.
Just kernel source + cross-toolchain...
Apart from that, the toolchain Sourcery G++ Lite 2010q1-189 for ARM uClinux (uClibc C library 0.9.30) is very close to the Archos one.
BTW, anyone tried to tweak the Archos build script to built the toolchain for external use?
Cheers,
scholbert
scholbert said:
So if i restrict my activities on kernel compilation all three should do the job.
I made a custom kernel using the above mentioned GNU C toolchain, all compiles fine, but did not test it yet.
Click to expand...
Click to collapse
Hi Scholbert!
I've been doing the same for my kernels, it compiles and runs fine, wifi loads without any particular tweak with the original Archos compiled module, but I didn't check hdmi as I don't have cable for it. I'm using a cm7 toolchain to build it (arm-eabi-4.4.3) though.
scholbert said:
This is next... i need to find an easy way to test my tweaked kernels.
So far i would recommend UrukDroid running and use the recovery menu to exchange the kernel & ramdisk.
Click to expand...
Click to collapse
My setup is a bit different since I patched bootloader: I have my "stable" build on normal boot (/rawfs/init) and my dev build on sde (/rawfs/custom), and I flash my kernel directly from my stable build without going through recovery.
I just do adb push kernel and initrd, then directly on device a "kd_flasher -k kernel -i initrd", and I reboot from normal to sde with a "reboot_into sde". It's really quick this way, I just have a script on my linux box to do all this.
I believe you can do the same without patched bootloader with a temproot on secure archos build.
scholbert said:
EDIT2:
Anyone tried to compile a gen8 kernel using the new gen9 kernel source?
Everything seems to be there...
Click to expand...
Click to collapse
Yes, I'm playing with it. I don't know what device you have, but mine (A70S) was not finished in Archos sources: board-archos-a70s is almost empty, panel wasn't finished... I add stuff slowly (still learning Omap, I know Qualcomm better), my kernel boots, I currently have framebuffer, internal mmc and usb working.
Hi letama!
letama said:
I've been doing the same for my kernels, it compiles and runs fine, wifi loads without any particular tweak with the original Archos compiled module, but I didn't check hdmi as I don't have cable for it. I'm using a cm7 toolchain to build it (arm-eabi-4.4.3) though.
Click to expand...
Click to collapse
Cool that's nice information.
Interesting that the tiwlan_drv.ko loads without problems.
Just to start an experiment, i started to shrink down the buildroot setup from Archos and built the gcc 4.4.1 toolchain only.
But it's not finished yet...
letama said:
My setup is a bit different since I patched bootloader: I have my "stable" build on normal boot (/rawfs/init) and my dev build on sde (/rawfs/custom), and I flash my kernel directly from my stable build without going through recovery.
Click to expand...
Click to collapse
O.k. i see, sounds like a clean environment this way.
In fact there's no need for this sqashfs thing anymore...
I already got the SDE's avboot version installed. This version is little bigger in size and obviously got some add-on's.
The same byte signature could be found here, so i guess the hack would match this avboot version as well.
Maybe i give it a try.
letama said:
I just do adb push kernel and initrd, then directly on device a "kd_flasher -k kernel -i initrd", and I reboot from normal to sde with a "reboot_into sde". It's really quick this way, I just have a script on my linux box to do all this.
Click to expand...
Click to collapse
Cool, sounds like a nice development platform this way.
letama said:
I believe you can do the same without patched bootloader with a temproot on secure archos build.
Click to expand...
Click to collapse
Mmmh i thought about using it from UrukDroid...
Anyway, the way you do it sounds more elegant.
letama said:
Yes, I'm playing with it. I don't know what device you have, but mine (A70S) was not finished in Archos sources: board-archos-a70s is almost empty, panel wasn't finished... I add stuff slowly (still learning Omap, I know Qualcomm better), my kernel boots, I currently have framebuffer, internal mmc and usb working.
Click to expand...
Click to collapse
I got an A101... looks little better here, but i did not compile the kernel yet.
Anyway, would be nice to have a complete kernel (incl. wireless and HDMI base code) in the end which compiles fine with latest gcc and runs out of the box
Thanks a lot for your extensive reply!!!
Regards,
scholbert
scholbert said:
I already good the SDE's avboot version installed. This version is little bigger in size and obviously got some add-on's.
The same byte signature could be found here, so i guess the hack would match this avboot version as well.
Maybe i give it a try.
Click to expand...
Click to collapse
Yes, it's the same signature, I verified it with IDA before installing sde, only location differs. You should be fine as long as you don't have multiple matches. If you want my code to patch it, let me know... You'd have to adapt the offsets but it would be probably safer than doing it manually.
Regarding kernel development, I forgot one big advantage to have patched bootloaders: ram_console! I built my "stable" and "dev" kernels with it, so I just have to make my dev kernel to crash to reboot and get the full dmesg with "cat /proc/last_kmsg" even if framebuffer or usb don't work .
scholbert said:
I got an A101... looks little better here, but i did not compile the kernel yet.
Anyway, would be nice to have a complete kernel (incl. wireless and HDMI base code) in the end which compiles fine with latest gcc and runs out of the box
Click to expand...
Click to collapse
Yes, gen9 sources look better for A101, I took them as base for my A70 and it's almost ok. I took away hdmi as it seems a bit too hackish, I'll see later . I also had some issue with gp timers that wouldn't use 32K clock, I'd be curious to see a dmesg on a gen9 tablet.
Right now I'm fighting with usb that kills video driver looonng way to go before having a fully functional kernel.
letama said:
Yes, it's the same signature, I verified it with IDA before installing sde, only location differs. You should be fine as long as you don't have multiple matches. If you want my code to patch it, let me know... You'd have to adapt the offsets but it would be probably safer than doing it manually.
Click to expand...
Click to collapse
Thanks for offering your tool.
Guess it's the same you once posted in that thread about changing bootlogo.
I had a look at the soruces once.
Anyway i already prepared a patched bootblock. Did not re-write it yet
Time is lacking...
letama said:
Regarding kernel development, I forgot one big advantage to have patched bootloaders: ram_console! I built my "stable" and "dev" kernels with it, so I just have to make my dev kernel to crash to reboot and get the full dmesg with "cat /proc/last_kmsg" even if framebuffer or usb don't work .
Click to expand...
Click to collapse
Yupp that's nice... have you seen my UART hack?
letama said:
Yes, gen9 sources look better for A101, I took them as base for my A70 and it's almost ok. I took away hdmi as it seems a bit too hackish, I'll see later . I also had some issue with gp timers that wouldn't use 32K clock, I'd be curious to see a dmesg on a gen9 tablet.
Right now I'm fighting with usb that kills video driver looonng way to go before having a fully functional kernel.
Click to expand...
Click to collapse
Guess i will try to compile this kernel soon.
No time for that right now.
Made some efforts to built special toolchain.
See the upcoming post...
Big thanks for participating!!!
Regards,
scholbert
Ready to use Archos specific toolchain
Hi again,
three simple steps to build UrukDroid custom kernel/modules:
1. Grab my customized toolchain and install it (see first post).
The toolchain is configured to work on mostly any 32Bit linux host (min. libc 2.3.6, should work down to Debian 4.0, Ubuntu 8.04 and similar).
The toolchain must be extracted and placed at /opt on your host machine (x86).
To run it as a user you might change the properties for /opt directory to match the user's rights.
You also could extract the archive as root and run:
chown -R 1000:1000 /opt/arm-archos
To make it more comfortable:
Modify user's .bashrc file to include the path to the toolchain:
export PATH=$PATH:/opt/arm-archos/usr/bin
2. Grab UrukDroid kernel sources and compile.
UrukDroid kernel sources could be found here:
http://sauron.pourix.com/UrukDroid/UrukDroid-1.5/UrukDroid-1.5.1-kernelsrc.tar.bz2
You might extract the sources anywhere you like.
After this has been done, step into the kernel source root directory.
Modify Makefile to use the Archos toolchain (line 199):
Code:
...
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
export KBUILD_BUILDHOST := $(SUBARCH)
ARCH ?= $(SUBARCH)
CROSS_COMPILE ?= arm-linux-uclibcgnueabi-
...
cp linux.config .config
make oldconfig
make zImage
make modules
make modules_install INSTALL_MOD_PATH=/my_kernel/modules/
3. Transfer the binaries to your Archos device.
Right now there's no need to exchange the kernel, because we use $auron's base setup for the kernel.
Place your custom modules at /lib/modules
TBC
scholbert
scholbert said:
Thanks for offering your tool.
Guess it's the same you once posted in that thread about changing bootlogo.
I had a look at the soruces once.
Anyway i already prepared a patched bootblock. Did not re-write it yet
Time is lacking...
Click to expand...
Click to collapse
Yes, it's roughly the same code. You did patch both location ?
scholbert said:
Yupp that's nice... have you seen my UART hack?
Click to expand...
Click to collapse
Yes, saw it, it would be very nice to have console on serial, but I don't want to open my A70 yet as it's still has warranty running. I may try that if I can find parts and if I get a gen9 as "main".
scholbert said:
Guess i will try to compile this kernel soon.
No time for that right now.
Click to expand...
Click to collapse
Great! Let me know if you have something, I'd be very interested in a dmesg.
I somehow "fixed" my video driver problem (well, not really fixed, adding traces made it go away ), now I'm trying to get SurfaceFlinger works. Sgx driver doesn't seem to play nice with .29 userspace binaries, I'm not sure I'd be able to go much further without new binaries.
scholbert said:
Made some efforts to built special toolchain.
See the upcoming post...
Click to expand...
Click to collapse
Nice! I'll try to take a look at it when I find some time.
Hey letama,
sorry for the delay...
letama said:
Yes, it's roughly the same code. You did patch both location ?
Click to expand...
Click to collapse
Yepp, both locations are patched.
As we already pointed out, there the rawfs header contains some checksums and avboot is the first file in there.
What do you think, if i manually change some bytes in avboot and leave the checksum untouched, will there be any problems?
letama said:
Yes, saw it, it would be very nice to have console on serial, but I don't want to open my A70 yet as it's still has warranty running. I may try that if I can find parts and if I get a gen9 as "main".
Click to expand...
Click to collapse
O.k. if there's warranty on your device, i totally agree.
letama said:
Great! Let me know if you have something, I'd be very interested in a dmesg.
Click to expand...
Click to collapse
Need more time
letama said:
I somehow "fixed" my video driver problem (well, not really fixed, adding traces made it go away ), now I'm trying to get SurfaceFlinger works. Sgx driver doesn't seem to play nice with .29 userspace binaries, I'm not sure I'd be able to go much further without new binaries.
Click to expand...
Click to collapse
Yeah guess there are some changes in the drivers API.
letama said:
Nice! I'll try to take a look at it when I find some time.
Click to expand...
Click to collapse
So far i tested it, the toolchain works out very nice.
Concerning kernel compilation:
It seems the binaries are quite well optimized in size. No problems so far.
I found out that in stock ROM they used some strip command to make the modules even smaller.
Anyway won't speed things up significantly i guess...
Concerning userland apps:
Though my genereated uClibc is little bigger in size, i noticed no problems so far. A binary comparison between the libaries (stock vs mine), shows little differences though.
Anyway, would be nice if people use it and report...
Have a nice day!
scholbert
Hi Scholbert!
scholbert said:
sorry for the delay...
Click to expand...
Click to collapse
No problem, I'm also busy as hell...
scholbert said:
Yepp, both locations are patched.
As we already pointed out, there the rawfs header contains some checksums and avboot is the first file in there.
What do you think, if i manually change some bytes in avboot and leave the checksum untouched, will there be any problems?
Click to expand...
Click to collapse
Well, I didn't touch checksums either, and it seems they're not checked anywhere else, so you should be good. As long as you patched both location before reboot, you should be ok.
scholbert said:
Yeah guess there are some changes in the drivers API.
Click to expand...
Click to collapse
I made some progress there, I took LG P970 3D binaries with driver source code from their cm7 kernel (they also have a 2.6.35) and I was able to boot up to launcher. I had to fiddle a bit with audio runtime as phone audio won't work, but low level audio driver is working too. Next step is touchscreen... And probably doing a proper cm7 build, I'm running a frankenstein mix of cm7 for nook tablet
scholbert said:
So far i tested it, the toolchain works out very nice.
Click to expand...
Click to collapse
I tried it briefly yesterday as I borked my kernel config at some point and it was crashing my usual toolchain, it doesn't run on my comp: "error while loading shared libraries: libmpfr.so.1: wrong ELF class: ELFCLASS64". Ubuntu 11.10 64 bits...
Best,
LeTama
letama said:
Well, I didn't touch checksums either, and it seems they're not checked anywhere else, so you should be good. As long as you patched both location before reboot, you should be ok.
Click to expand...
Click to collapse
Yeah guessed so... the russian guy who first tried this hack also never mentioned anything like this. So it'll be safe then.
letama said:
I made some progress there, I took LG P970 3D binaries with driver source code from their cm7 kernel (they also have a 2.6.35) and I was able to boot up to launcher. I had to fiddle a bit with audio runtime as phone audio won't work, but low level audio driver is working too. Next step is touchscreen... And probably doing a proper cm7 build, I'm running a frankenstein mix of cm7 for nook tablet
Click to expand...
Click to collapse
Wow sounds pretty like a "frankengenius" software design.
Good work!
Have you seen that Archos released part of the hdmi code as external driver code. So the kernel is even more open now (speaking of 2.6.29).
Sometimes their cooperation is very nice.
About two weeks ago i contact the author at NXP, then last week i wrote to Archos and on thursday they released it. Not bad...
Anyway they ought to release the source, even without mentioning it.
It's just GPL code.
letama said:
I tried it briefly yesterday as I borked my kernel config at some point and it was crashing my usual toolchain, it doesn't run on my comp: "error while loading shared libraries: libmpfr.so.1: wrong ELF class: ELFCLASS64". Ubuntu 11.10 64 bits...
Click to expand...
Click to collapse
Sure the toolchain is compiled for 32Bit systems, forgot to mention this.
So it will never work on a 64Bit system.... sorry
Cheers,
scholbert
scholbert said:
Have you seen that Archos released part of the hdmi code as external driver code. So the kernel is even more open now (speaking of 2.6.29).
Click to expand...
Click to collapse
Didn't see it, very nice! HDMI is a low on my priority list, but it's good to have source code, it will help porting it. Even though my efforts on this kernel will slow a bit as I purchased today a gen9 and ICS source code is out .
At first glance, boot process and layout looks very similar to our gen8, same rawfs, a custom file that would indicate that we should get SDE, so far so good. Need to spend some quality time with hex editor and IDA now .
Damn work, I need 72 hours days!
scholbert said:
Sure the toolchain is compiled for 32Bit systems, forgot to mention this.
So it will never work on a 64Bit system.... sorry
Click to expand...
Click to collapse
No problem, just wanted to give a bit of feedback.
@letama:
Wouldn't it be alot more productive for you and us if you would somehow join your affort with the guys from openaos?
cm7 and then cm9 would be here faster the more experienced devs are helping.
fzelle said:
@letama:
Wouldn't it be alot more productive for you and us if you would somehow join your affort with the guys from openaos?
cm7 and then cm9 would be here faster the more experienced devs are helping.
Click to expand...
Click to collapse
Hi fzelle,
Well, I'm only learning slowly, they're far more experienced than me on Archos. My main goal is to understand omap platform, that's why I'm toying with the 2.6.35 kernel. Cm7 is only a convenient for way me to make sure the kernel behaves well. I don't seek a perfect cm7/archos experience for all devices as they do, but if at some point I learned enough, I may try to help if I can.
LeTama
CM7 for Archos atm is based on the 2.6.29 kernel delivered from Archos, so your kernel is far more advanced.
And if you got 2.6.35 to work properly, the guys over at openaos would probably be happy to use that.
fzelle said:
CM7 for Archos atm is based on the 2.6.29 kernel delivered from Archos, so your kernel is far more advanced.
And if you got 2.6.35 to work properly, the guys over at openaos would probably be happy to use that.
Click to expand...
Click to collapse
Yes, 2.6.35 should match better gingerbread code. If I can go somewhere, I'll share it. Currently, I'm far from that, still having troubles with usb and a big piece will be power management. We'll see, but I'm a bit out of free time.
Hey letama,
i guess fzelle is right.
AFAIK, the openaos developers concentrate on the Android part for gen8. As stated they still use 2.6.29 and this no problem so far.
But a kernel project might run in parallel.
Would be nice to get the new kernel working at least for A70 and A101.
I started a build for A101 (...and still compiling), maybe we could share our .config file
EDIT: Aaaaaargh, still fighting with the kernel config/compile errors.
Wifi/BT framework issue.... RFKILL_STATE_UNBLOCKED etc. seems not to be implemented anymore...
letama said:
I made some progress there, I took LG P970 3D binaries with driver source code from their cm7 kernel (they also have a 2.6.35) and I was able to boot up to launcher. I had to fiddle a bit with audio runtime as phone audio won't work, but low level audio driver is working too. Next step is touchscreen... And probably doing a proper cm7 build, I'm running a frankenstein mix of cm7 for nook tablet
Click to expand...
Click to collapse
The SGX part is an open issue i guess, but there's some support form Ti as well. E.g.: https://gforge.ti.com/gf/project/openmax/frs/
Remember the Beagleboard-XM is very similar to what we got on our devices.
Also Zoom3 platform, so maybe their repository is a good starting point for these addon's as well.
In fact using the OMAP might be a benefit in general, because there are so many opensource projects covering this architecture
Happy hacking!
scholbert
Hi Scholbert,
scholbert said:
i guess fzelle is right.
AFAIK, the openaos developers concentrate on the Android part for gen8. As stated they still use 2.6.29 and this no problem so far.
But a kernel project might run in parallel.
Would be nice to get the new kernel working at least for A70 and A101.
Click to expand...
Click to collapse
Agreed! It would be nice if we could develop both A70 and A101 in parallel, sharing will speed things up.
scholbert said:
I started a build for A101 (...and still compiling), maybe we could share our .config file
Click to expand...
Click to collapse
I attached my current one, I added one config option that you don't have, CONFIG_MUSB_ERRATA_445, you can remove the line. I'm not sure I have the config right, but it boots and has quite a lot of stuff working. You need to re-add A10IT board though.
scholbert said:
The SGX part is an open issue i guess, but there's some support form Ti as well. E.g.: https://gforge.ti.com/gf/project/openmax/frs/
Click to expand...
Click to collapse
Well, for me it's no longer an issue, I think what I did is the best we can do until we can get a hand on Archos binaries for 3630. The issue is that you have to have proprietary binaries, they must match driver version, and the binaries I have from P920 works fine even though maybe not as recent as Archos ones. There is no open source implementation afaik. OpenMax is only for video codec, not 3D.
scholbert said:
Happy hacking!
Click to expand...
Click to collapse
Thanks, you too! You have a mission now! Let's get this kernel running on A101
Hi letama!
letama said:
Agreed! It would be nice if we could develop both A70 and A101 in parallel, sharing will speed things up.
Click to expand...
Click to collapse
To be honest i meant developing openaos and kernel in parallel. Who ever does it
Anyway, as i wrote it... i started to play around with the new kernel.
It's hard for me these days to find some time for hacking and i'm not a genius in modifying kernel drivers and stuff.
So in fact i don't know how far i will get things rollin'
letama said:
I attached my current one, I added one config option that you don't have, CONFIG_MUSB_ERRATA_445, you can remove the line. I'm not sure I have the config right, but it boots and has quite a lot of stuff working. You need to re-add A10IT board though.
Click to expand...
Click to collapse
Thanks a lot. I will compare your config with my setup.
Already found some missing parts in the board file...
letama said:
Well, for me it's no longer an issue, I think what I did is the best we can do until we can get a hand on Archos binaries for 3630. The issue is that you have to have proprietary binaries, they must match driver version, and the binaries I have from P920 works fine even though maybe not as recent as Archos ones. There is no open source implementation afaik. OpenMax is only for video codec, not 3D.
Click to expand...
Click to collapse
Ah i see, so i'll take a look at the binaries.
I guess you meant P970, as stated earlier.
letama said:
Thanks, you too! You have a mission now! Let's get this kernel running on A101
Click to expand...
Click to collapse
Haha, as stated above... nice mission anyway
BTW, did you see there are some nice projects at gitorious.
A 2.6.37 kernel port for A43 and A101 had also been started already.
I had a short look at some parts... don't know about the exact state of the code.
Let's stay in touch!
Best regards,
scholbert
Everyone is allowed to make changes to the VMWare image and re-upload it. If you re-upload the VMWare image with the made corrections, post the download link(s) in this thread. I will update the first post.
If there is a AOSP Developer that is willing to make a complete tutorial, please make one that works and is up-to-date with 2.3.7
The more people we have working on making ROMs, the better.
This VMWare image is:
- Base: Ubuntu 10.04 LTS
- ICS ready
- Gingerbread ready
- Fully updated
- Eclipse with ADT Plugin
- Android Kitchen Integrated
PASSWORD: root
Latest changelog (Coming soon)
- Based on 10.04 LTS instead of 11.10
- Different approach
Download link:
Bypass 24h wait time, limit reached --> Solution? Reset your ip! In Belgium this is easy by restarting your modem/router. This may be different in other countries.
more mirrors will come!
Part 1
Part 2
Part 3
Image is extracted, where do I start?
Continue from this link
How to build 2.3.7 for Nexus S
This is just a snippet that may help you.
repo init -b android-2.3.7_r1 < /dev/null (This branch is ready to use with Nexus S and Nexus S 4G)
repo sync
source build/envsetup.sh
lunch full_crespo-userdebug
make -j8 (-j8 = for eightcores like 2600k, 2630QM / -j4 = for quads 2500K/2620M/Q6600 / -j2 for dual cores / ...)
Click to expand...
Click to collapse
Don't forget to add the vendor files of the device. You need to download the scripts as well of the driver binaries.
Click to expand...
Click to collapse
I tested a quick build. And it's working.
A virtual machine with limited RAM in order to compile AOSP? Definitively not a good idea. Why not dual boot? Sooooo easy to install the worst distro ever (*buntu).
This is awesome. My only problem is that I only have VMWare Workstation 7.
Super! Waiting for this
djjonastybe said:
Dear community,
I made a AOSP developer environment for VMWare Workstation 8 or latest VMWare Player (free).
You can use this VMWare image as a base to build AOSP ROMs. Imade it for those having trouble getting it to work or maybe if you don't have time to set it up properly. Well if you are downloading this you might have a good reason!
Anyway have fun!
If there are any errors let me know.
This VMWare image is:
- ICS ready
- Gingerbread ready
- Fully updated
Download link:
...uploading...
Click to expand...
Click to collapse
Who would have guessed that an android dev would have difficulty setting up a linux enviroment . . . go figure.
You do not have to be an Android Dev to compile Android. I haven't written a single line of code for Android and can compile AOSP 2.3.7 fine.
This is simply to save time. And if you have good enough hardware (like myself) compiling Android AOSP in a VM session works perfectly fine.
Most people that are into computers have a rocking system. I have 12GB ram, I dedicate 8 for my VM and the rest for my main OS (windows 7). Works fine, what's the issue?
Some people don't want to dual boot and sometimes a Linux distro doesn't support certain hardware or can't be installed.
I would appreciate it. THANKS
nice.....this could be very useful
Sent from my Nexus S using xda premium
FeaRThiS: Who would have guessed that an android dev would have difficulty setting up a linux enviroment . . . go figure.
Click to expand...
Click to collapse
You seem to be the only one against uploading this.
Guys I am still trying to upload it. I am splitting it in 700MB sizes. Crocko's uploadservice is down. I will upload it on depositfiles and multiupload
12,5%
@FeaRThiS just stated the obvious. I also think the first step to understand how to build an AOSP ROM is knowing how to setup the development environment.
I don't have anything against using a VMWare image. But, IMHO, considering the time for uploading/downloading the file, if you do the setup yourself (in VMWare or whatever), you should have already been compiling your ROM by now.
suksit said:
@FeaRThiS just stated the obvious. I also think the first step to understand how to build an AOSP ROM is knowing how to setup the development environment.
I don't have anything against using a VMWare image. But, IMHO, considering the time for uploading/downloading the file, if you do the setup yourself (in VMWare or whatever), you should have already been compiling your ROM by now.
Click to expand...
Click to collapse
Okay, its not useful for you two.
Next!
I like it and i will try it.
djjonastybe said:
You seem to be the only one against uploading this.
Guys I am still trying to upload it. I am splitting it in 700MB sizes. Crocko's uploadservice is down. I will upload it on depositfiles and multiupload
12,5%
Click to expand...
Click to collapse
I have nothing against it and it may even be useful in case of emergency when you can not access a linux machine, but as stated by @S suxeN the first step for any dev would be learning to create their own dev enviroment.
i didnt say that.
but the statement is right. Anyways i yet think this image is of great use, as you can always start from there, if u did something wront, what can always happen to nun-linux users.
I don't know anything about linux. Is Eclipse with ADT on here by any chance? If not, what IDE is there to develop with in this VM?
I didn't think that far. Eclipse is not installed.
But I will work on it for next release. For now you have to install it manually. I hope tomorrow evening the new vmware will be uploaded!
Hey guys, don't be so hard on the fella. He's doing us a great service in a way. Not all of us are able to bring laptops wherever we go, dual-boot, etc. I just downloaded this to my external drive that I use to keep my stuff on for work and it'll come in handy when I wanna test apps without worrying about nuking my phone.
Also, it helps that I can demo apps on the thing to co-workers on screen than using a phone. That way I won't have to worry about them screwing things up if they decided to 'explore.'
http://code.google.com/android/nexus/drivers.html#crespogwk74
Can someone help me with this? This has the binaries for the Nexus S.
Where do I place the scripts?
I have a vendor folder with several maps in it now. But I don't know what I have to do now.
I placed the 'vendor' folder in my working directory. But lunch isn't showing up crespo in the list.
These are my steps:
Building
I executed lunch. I realised I did not have crespo in the list. So next, I read the line 'Building for devices'.
Eventually I ended up here:
Building devices
Obtaining proprietary binaries
Starting with IceCreamSandwich, the Android Open-Source Project can't be used from pure source code only, and requires additional hardware-related proprietary libraries to run, specifically for hardware graphics acceleration.
Official binaries for Nexus S, Nexus S 4G, Galaxy Nexus, and PandaBoard can be downloaded fromGoogle's Nexus driver page, which add access to additional hardware capabilities with non-Open-Source code.
There are no official binaries for Nexus One, ADP2 or ADP1., ADP2 or ADP1.
Click to expand...
Click to collapse
I clicked the link and downloaded the GWK74 binaries.
Now then I read further:
Extracting the proprietary binaries
Each set of binaries comes as a self-extracting script in a compressed archive. After uncompressing each archive, run the included self-extracting script from the root of the source tree, confirm that you agree to the terms of the enclosed license agreement, and the binaries and their matching makefiles will get installed in the vendor/ hierarchy of the source tree.
Click to expand...
Click to collapse
I have the vendor hierarchy...
Do I have to put these files in:
my home folder/bin
OR
home folder/workingdirectory_name
Or what do I have to do now?
updated first post with small hint on how to download 2.3.7 for our Nexus S. Good luck!
yep, i think this is pretty awesome. for me, i'm not an android dev but i've dabbled with theming and porting mods from other phones to the epic 4G previously. i'd love to be able to start with a system ready to go and mess around with some guides to learn how to compile source, etc... thanks.
Nice image man, gonna give it a go later. Thought I'd put my word in the discussion , sure there lots of talented devs, but they have all got different hardware/software and time requirements. So this becomes a useful tool to add to the inventory.
this is not to rush the devs, just asking, are they gonna wait till ( i really hope it actually hapens) jb update comes to us to start developing? couse i think our phone haves a lot more to give to us than the stock rom can, again i am not rushing the devs, just asking your oppinion, and since im kinda new to theese forums hardly think any dev is going to bother to even answer this thread
so im pretty much.asking your oppinion
this is just a question , please dont kill me
sent from the gray stuff inside my skull
demonoid phenomenom said:
this is not to rush the devs, just asking, are they gonna wait till ( i really hope it actually hapens) jb update comes to us to start developing? couse i think our phone haves a lot more to give to us than the stock rom can, again i am not rushing the devs, just asking your oppinion, and since im kinda new to theese forums hardly think any dev is going to bother to even answer this thread
so im pretty much.asking your oppinion
this is just a question , please dont kill me
sent from the gray stuff inside my skull
Click to expand...
Click to collapse
If you mean Custom Roms... we can't do anything until we can pack / unpack the boot.img/or recovery.img to make a custom recovery.
jeah thats right, i was wondering because my expirience with atrix 2 , previous to the ics update, i was using supercharger rom series, but again i understand that they got a leak to work on, and a bootstrap to flash the restores they where creating, and that stock leaked rom was awesome
sent from the gray stuff inside my skull
mattlgroff said:
If you mean Custom Roms... we can't do anything until we can pack / unpack the boot.img/or recovery.img to make a custom recovery.
Click to expand...
Click to collapse
Only for my own curiosity: what's prevents that ? The x86 arch ? or something else ?
Le_Poilu said:
Only for my own curiosity: what's prevents that ? The x86 arch ? or something else ?
Click to expand...
Click to collapse
Would be nice to know for sure. The current methods cannot find 'Android Magic'.
I'm looking forward to seeing this forum get some custom ROMs too...
Looks like progress is getting on with it now
Any updates on custom ROM making for this device?
I've followed the README from <link to Motorola's sourceforge for razr i, deleted because I'm a new user> , got to the final step, but now I'm stumped. What make target should I choose? 'make full_x86-eng' and 'make generic_x86' have no make rules. A simple 'make' generates a framework build error.
What do I have to do in order to get a bootable image (built from source) for the Razr i?
I'd appreciate any kind of advice. Thanks in advance.
PS: Many thanks Matt, turl1 and the other developers that worked on this device.
tiberiu24 said:
Any updates on custom ROM making for this device?
I've followed the README from <link to Motorola's sourceforge for razr i, deleted because I'm a new user> , got to the final step, but now I'm stumped. What make target should I choose? 'make full_x86-eng' and 'make generic_x86' have no make rules. A simple 'make' generates a framework build error.
What do I have to do in order to get a bootable image (built from source) for the Razr i?
I'd appreciate any kind of advice. Thanks in advance.
PS: Many thanks Matt, turl1 and the other developers that worked on this device.
Click to expand...
Click to collapse
You won't be able to build a full android system from that source. The most you can do is
Code:
$ . build/envsetup.sh
$ lunch generic_x86-eng
$ make [I]target[/I]
Where target is something like out/target/product/generic/system/bin/bluetoothd or bluetoothd
I am working on a device tree. Writing it from scratch isn't easy because there is no device I can base this on. No other x86 tree out there. And I still dont have a device. I did make threads requesting for a device but they got closed down. So once I have something built I'll make a new thread.
Sent from my GT-I9300 using xda app-developers app
hiemanshu said:
I am working on a device tree. Writing it from scratch isn't easy because there is no device I can base this on. No other x86 tree out there. And I still dont have a device. I did make threads requesting for a device but they got closed down. So once I have something built I'll make a new thread.
Click to expand...
Click to collapse
There's at least 10 device trees on the android-x86 project. And AOSP itself has a generic one, to build the x86 emulator platform. And I made a basic one to build recovery already, with support to generate the newer x86 boot image format.
Just saying
PS: I don't own the phone either
turl1 said:
There's at least 10 device trees on the android-x86 project. And AOSP itself has a generic one, to build the x86 emulator platform. And I made a basic one to build recovery already, with support to generate the newer x86 boot image format.
Just saying
PS: I don't own the phone either
Click to expand...
Click to collapse
Generic x86 and the razr I are too far apart. Also the android x86 ones are too far apart too (I am working on a android x86 tablet). I have already written more than 450 lines of the device tree by hand, and there is a lot more to go right now. I have patched bionic for x86 builds, I need to patch the build folder next, and even busybox needs patching, etc. I am now working on making a perfect set of the 3 important files, BoardConfing.mk, device.mk and proprietary-files.txt. My android x86 tree is a total of 181 lines (which in itself is twice the size of the trees on android-x86). Its fun, but really time consuming. Also the AOSP ones are generic ones, they will work on any system if you have all the correct drivers installed or compiled via the kernel, but Razr I needs the files to be pulled from the stock build, and it needs a lot of them, including kernel drivers.
-H
hiemanshu said:
Generic x86 and the razr I are too far apart. Also the android x86 ones are too far apart too (I am working on a android x86 tablet). I have already written more than 450 lines of the device tree by hand, and there is a lot more to go right now. I have patched bionic for x86 builds, I need to patch the build folder next, and even busybox needs patching, etc. I am now working on making a perfect set of the 3 important files, BoardConfing.mk, device.mk and proprietary-files.txt. My android x86 tree is a total of 181 lines (which in itself is twice the size of the trees on android-x86). Its fun, but really time consuming. Also the AOSP ones are generic ones, they will work on any system if you have all the correct drivers installed or compiled via the kernel, but Razr I needs the files to be pulled from the stock build, and it needs a lot of them, including kernel drivers.
-H
Click to expand...
Click to collapse
I'm playing a bit with AOSP 4.2 as I got some free time. This is what I found out so far:
bionic needed no patches. I seriously doubt it needs any on 4.1 (CM) either as recovery built fine.
build needed no patches either on both cases.
dalvik needed a 4-liner to build on AOSP (makefile fixes), I haven't tried to build it on CM
there's no busybox on AOSP, I patched the one on 4.1 already to be able to build recovery, it's all on CM Gerrit as you'd expect from a CM developer like myself
my tree is already 120 lines, as soon as you add the media decoder config and audio routing config you'll go over 180 lines
having proper drivers isn't enough, you need proper HALs too. And I haven't really looked, but I'd be surprised if you had to pull kernel drivers from the stock rom
turl1 said:
I'm playing a bit with AOSP 4.2 as I got some free time. This is what I found out so far:
bionic needed no patches. I seriously doubt it needs any on 4.1 (CM) either as recovery built fine.
build needed no patches either on both cases.
dalvik needed a 4-liner to build on AOSP (makefile fixes), I haven't tried to build it on CM
there's no busybox on AOSP, I patched the one on 4.1 already to be able to build recovery, it's all on CM Gerrit as you'd expect from a CM developer like myself
my tree is already 120 lines, as soon as you add the media decoder config and audio routing config you'll go over 180 lines
having proper drivers isn't enough, you need proper HALs too. And I haven't really looked, but I'd be surprised if you had to pull kernel drivers from the stock rom
Click to expand...
Click to collapse
1) bionic needs patching, patch already submitted to CM gerrit libdvm basically
2) build needs patching for the boot.img
3) dalvik has been patched
4) Odd, didn't notice that
5) Probably wont required pulling in kernel drivers, but would required pulling in the correct drivers for the defconfig
I'd be happy if you wanted to work together to get this working. PM me
hiemanshu said:
1) bionic needs patching, patch already submitted to CM gerrit libdvm basically
2) build needs patching for the boot.img
3) dalvik has been patched
4) Odd, didn't notice that
5) Probably wont required pulling in kernel drivers, but would required pulling in the correct drivers for the defconfig
I'd be happy if you wanted to work together to get this working. PM me
Click to expand...
Click to collapse
Let's continue talking on PM then
re. 2, I actually did need to patch build on AOSP after all . CM on the other hand, has BOARD_CUSTOM_BOOTIMG_MK from the tf tablets.
Hey I posted a rom over at droidrzr.com for use till aosp is ready. This should be enough till we get a jb leak
Sent from my XT890 using Tapatalk 2
Hi Folks
While I don't own a RAZR I , I have been Jaffing around with building CM10.1 and AOSP for x86, I've been getting in going on my FX8120, just need to sort the OpenGLES MESA drivers out.
Anyways I've got CM10.1 built for x86 using the mr1-staging branch ( I think it's been merged to cm10.1 ) and an edited mini-x86 device tree .
Busybox was a B**stard to build though, although on one of the branches there is an .config-minimal-x86 .config-full-x86, still needed tweaking tho.
I submitted my patches http://review.cyanogenmod.org/#/c/27377/ and http://review.cyanogenmod.org/#/c/27373/, however It seems x86 isn't top of cm's agenda.... or I'm missing something about assigning reviewers.
Obviously a base x86 build is only part of the story for you guys as you'll face all the regular problems that emedded devices have, not checked the specs for the RazR but I'm sure there's some binary blobs in your future,
Hack On Folks! :good:
Thanks to the amazing work of mapkel you can now use this script to compile and pack the kernel!
UPDATE: read mapkel's post here: http://forum.xda-developers.com/showpost.php?p=43419784&postcount=45
Thank him here.
This is an informative guide and I decline responsibility for any damage to your device.
Do not attempt to build this kernel if you are going to complain to devs about issues.
That being said, mapkel has made this so that even those with little knowledge can build the kernel without any issues. If you do have any issues, post here and I will try to assist you.
The following is a complete tutorial to building the kernel.
Credits:
Kernel Devs: krystianp, lehjr, Epinter, and mmontuori for making this kernel; without them there is no kernel.
Big thanks to mapkel for this amazing script.
Another big thanks to benouch for the original idea.
A final big thanks to zen25205 for help with building the kernel and getting the Linaro Toolchain.
Kernel Kitchen
I suggest building this with the latest CM9 MROM until the public beta is released.
You need to install Ubuntu 12.04 64bit (Google for instructions)
Prerequisites:
Open a terminal and run the following commands the first time:
Code:
sudo apt-get install -y build-essential kernel-package libncurses5-dev bzip2
Code:
sudo apt-get install git
If there are any issues with this guide, or if you have any issues building the kernel, post here and I will assist you as best I can.
Stage 1 (start at stage 2 if you have already built the kernel using this script:
Code:
cd ~
Code:
wget https://www.cubby.com/pl/kernel_script.zip/_25f010125b924ec7a42fe1d66245f36a
Code:
unzip ${HOME}/kernel_script.zip -d ${HOME}
Stage 2:
Code:
cd kernel
Code:
./script
There will be 4 choices to make throughout the script:
Clean install y/n (choose "n" on first run of script)
What defconfig? (Usually it is MROM but in the last update it is temporarily MROM2)
Compile CM9 or CM10 kernel? (self explanatory)
Name of config (Any name works. I chose "olympus".)
enjoy)
Built but cam not working
paladin881 said:
Built but cam not working
Click to expand...
Click to collapse
cameras disabled due to battery drain
Click to expand...
Click to collapse
https://github.com/CyanogenMod-Atrix/android_kernel_motorola_olympus/commits/master
Post here if it worked well for you. Give some feedback for mapkel.
No Wifi
Cheers, the script works great on Ubuntu 11.10, without a hic.
However, upon flashing the kernel, I get no wifi. I'm going to try your step by step tutorial...
Edit: I built the kernel using MROM2 defconfig and for CM10, and flashed "someone's" CM10
Newbleeto said:
Cheers, the script works great on Ubuntu 11.10, without a hic.
However, upon flashing the kernel, I get no wifi. I'm going to try your step by step tutorial...
Edit: I built the kernel using MROM2 defconfig and for CM10, and flashed "someone's" CM10
Click to expand...
Click to collapse
Strange..
The modules should copy with this.
Try CM9
atrix4g18 said:
Strange..
The modules should copy with this.
Try CM9
Click to expand...
Click to collapse
I'm updating Ubuntu, maybe the problem is on my end. Will try CM9 in the meanwhile and let you know!
Newbleeto said:
I'm updating Ubuntu, maybe the problem is on my end. Will try CM9 in the meanwhile and let you know!
Click to expand...
Click to collapse
You won't be able to do both.
If you compiled the kernel for CM10 you will only be able to use it on CM10.
Unless you are able to update Ubuntu as you compile the kernel for CM9.
atrix4g18 said:
You won't be able to do both.
If you compiled the kernel for CM10 you will only be able to use it on CM10.
Unless you are able to update Ubuntu as you compile the kernel for CM9.
Click to expand...
Click to collapse
It's impossible to compile while updating, didn't remember that, silly me :silly:
Anyhoot, wifi still doesn't work in Ubuntu 12.04. Fresh install on a different PC, way faster than updating
I'll try CM9 tomorrow, should've been asleep for a while
Can anyone or everyone list sites that work with a direct link.
That means I go to www.sitename/filename.zip and it starts downloading.
All I can think of right now is a cloud storage like Dropbox or Google Drive. I know Dropbox has a traffic limit for public files. Don't know about Google drive
Sent from my MB860 using xda app-developers app
upndwn4par has unlimited bandwidth, iirc. Maybe you can contact him and ask if you can host that one tiny script file there?
Or you could sign up with a free webhost and upload it there. There are several free webhosts with unlimited bandwidth (with a very limited space as trade-off, but I think it's more than enough for the script file).
If it's just a single script, maybe something like pastebin.com or similar might be an option? A little inconvenient since you have to copy and paste content instead of just download, but AFAIK it does have unlimited bandwidth.
atrix4g18 said:
Can anyone or everyone list sites that work with a direct link.
Click to expand...
Click to collapse
Maybe copy.com? Here is my ref for extra 5 GB: https://copy.com?r=qfhUoV
If this does not solve the problem, I can provide space for the script on my own server with a separate FTP account.
priard said:
Maybe copy.com? Here is my ref for extra 5 GB: https://copy.com?r=qfhUoV
If this does not solve the problem, I can provide space for the script on my own server with a separate FTP account.
Click to expand...
Click to collapse
Doesn't have a direct download link.
quetzalcoatl2435 said:
Doesn't have a direct download link.
Click to expand...
Click to collapse
Not quite. You can still download a file, for example using wget.
If You have a short public link, for instance: copy.com/PJzYgAUKECQm, You need to open it and copy the full link. In this case: copy.com/s/PJzYgAUKECQm/BetterBatteryStats_xdaedition_1.13.4.0.apk
then:
wget copy.com/s/PJzYgAUKECQm/BetterBatteryStats_xdaedition_1.13.4.0.apk
and done.
I will look at all the suggestions later today.
Thank you.
Delete
How does one port ROMs to another phone? I'm looking to try and port Xylon to the Find 5.
Sent from my X909 using xda app-developers app
it's really not that difficult. just have to adjust some overlays, change some stuff in vendor and maybe grab the camera from CM if the changes haven't been made to that ROM.
if you are building from source:
Find the 4.2.2 source code of the ROM you want to port
Get the manifest.
Add the CM10.1 device/kernel tree and proprietary libs in the .repo/local_manifest/roomservice.xml
sync all the repos
(do whatever the source might need you to set up: EG paranoid android, need you to setup your device properly in vendor/pa/* files)
compile. Fix any problems(maybe missing files, etc)
you could try a non-4.2.2-based ROM to port, but you'll run into more incompatibility issues to fix
mbh87 said:
it's really not that difficult. just have to adjust some overlays, change some stuff in vendor and maybe grab the camera from CM if the changes haven't been made to that ROM.
Click to expand...
Click to collapse
So would you say just use this
http://forum.xda-developers.com/showthread.php?t=2232773
And the CM10 for our Oppo?
Sent from my X909 using xda app-developers app
newbcake said:
So would you say just use this
http://forum.xda-developers.com/showthread.php?t=2232773
And the CM10 for our Oppo?
Sent from my X909 using xda app-developers app
Click to expand...
Click to collapse
No, build from source since it's available.
mbh87 said:
No, build from source since it's available.
Click to expand...
Click to collapse
You mean Oppo's source or AOSP from Google? I presume AOSP
Sent from my X909 using xda app-developers app
assuming this is the one you want to port (it is using 4.2.2, so hopefully it'll be easier)
read their README: https://github.com/XYAOSP/buildscripts
use repo and checkout this manifest
https://github.com/XYAOSP/platform_manifest/blob/jb4.2/default.xml
use repo and sync all the repos
then see how I get the device specific files here? do the same https://git.ngvincent.com/projects/oppo-x909-cm10/wiki/Build#Get-device-specific-sources-and-build
then follow whatever instructions needed to build. if it uses CM based building (which i think they do here, then do
. build/envsetup.sh && brunch
select the find5 entry (if it;s not there, then do lunch, select find5, mka)
wait for it to fail. read error message. fix error message. repeat last 3 steps .. Google is your friend... learn to love google
---------------------------------------
you should try building CM10.1 first. there will hopefully be no errors, and you learn how to use brunch/lunch/breakfast / etc
https://git.ngvincent.com/projects/oppo-x909-cm10/wiki/Build
paperWastage said:
assuming this is the one you want to port (it is using 4.2.2, so hopefully it'll be easier)
read their README: https://github.com/XYAOSP/buildscripts
use repo and checkout this manifest
https://github.com/XYAOSP/platform_manifest/blob/jb4.2/default.xml
use repo and sync all the repos
then see how I get the device specific files here? do the same https://git.ngvincent.com/projects/oppo-x909-cm10/wiki/Build#Get-device-specific-sources-and-build
then follow whatever instructions needed to build. if it uses CM based building (which i think they do here, then do
. build/envsetup.sh && brunch
select the find5 entry (if it;s not there, then do lunch, select find5, mka)
wait for it to fail. read error message. fix error message. repeat last 3 steps .. Google is your friend... learn to love google
---------------------------------------
you should try building CM10.1 first. there will hopefully be no errors, and you learn how to use brunch/lunch/breakfast / etc
https://git.ngvincent.com/projects/oppo-x909-cm10/wiki/Build
Click to expand...
Click to collapse
Is there something wrong with the Xylon repo? I keep getting this:
Code:
Cannot fetch htc-msm8960/[some path here]
newbcake said:
Is there something wrong with the Xylon repo? I keep getting this:
Code:
Cannot fetch htc-msm8960/[some path here]
Click to expand...
Click to collapse
use google and your own intuition to help you (this is why you should build the Cm10.1 ROM first.... the knowledge you gain will help you)
most likely either github is down, or the path referencing it is invalid, or something......
but the question is, do we need htc-msm8960? most likely no, since the oppo kernel is self contained
^^^ all this comes from experience.... seriously, go build cm10.1 for the find 5 first
paperWastage said:
use google and your own intuition to help you (this is why you should build the Cm10.1 ROM first.... the knowledge you gain will help you)
most likely either github is down, or the path referencing it is invalid, or something......
but the question is, do we need htc-msm8960? most likely no, since the oppo kernel is self contained
^^^ all this comes from experience.... seriously, go build cm10.1 for the find 5 first
Click to expand...
Click to collapse
we probably dont need it, but a lot of ROMs make you download ALL their devices and corresponding files.
Well, I removed the HTC lines from manifest.xml (maybe not a good idea?) but anyway, it finished syncing after.
mbh87 said:
we probably dont need it, but a lot of ROMs make you download ALL their devices and corresponding files.
Click to expand...
Click to collapse
yeah... it's a problem with a simple fix.... if the error was something like "packages_mms_app", then it's a more serious problem.....
does removing that repo mask a larger problem? that's why I'm pushing for OP to start small first by building CM10.1, and learn the environment (instead of posting every single problem he encounters here, and asks for help)
I've only started playing with android source code in March/early april... and these are things that I've learned/picked up since then.
paperWastage said:
yeah... it's a problem with a simple fix.... if the error was something like "packages_mms_app", then it's a more serious problem.....
does removing that repo mask a larger problem? that's why I'm pushing for OP to start small first by building CM10.1, and learn the environment (instead of posting every single problem he encounters here, and asks for help)
I've only started playing with android source code in March/early april... and these are things that I've learned/picked up since then.
Click to expand...
Click to collapse
Understood. I'm syncing up the Cm10 now. Thanks!
Is is best to do this all on Linux, Mac, or Windows?
It isn't possible to do it on windows so one of the other two.
mbh87 said:
It isn't possible to do it on windows so one of the other two.
Click to expand...
Click to collapse
Cool thanks. I just "finished" my compile on my Mac 10.7.8 but there was something about gcc422 not found. I have the latest XCode installed along with Dev tools. So can anyone help cause I didn't see anything with a Google.
I presume a clean Ubuntu is preferred
Sent from my X909 using xda app-developers app
newbcake said:
Cool thanks. I just "finished" my compile on my Mac 10.7.8 but there was something about gcc422 not found. I have the latest XCode installed along with Dev tools. So can anyone help cause I didn't see anything with a Google.
I presume a clean Ubuntu is preferred
Sent from my X909 using xda app-developers app
Click to expand...
Click to collapse
it's preferable
even on ubuntu, you still have to get specific packages: need oracle version of jdk, not openjdk, need to remove some incompatible stuff
heres a guide for ubuntu 12.10
https://git.ngvincent.com/projects/oppo-x909-cm10/wiki/Android-setup
paperWastage said:
it's preferable
even on ubuntu, you still have to get specific packages: need oracle version of jdk, not openjdk, need to remove some incompatible stuff
heres a guide for ubuntu 12.10
https://git.ngvincent.com/projects/oppo-x909-cm10/wiki/Android-setup
Click to expand...
Click to collapse
I tried compiling CM10, and am even having problems with that. Google did not seem to help for this. Here is what I did:
I did the mka, then mka otapackage, and NOTHING is appearing. No zips at all.
Code:
hardware/qcom/media/mm-video/vidc/vdec/src/omx_vdec.cpp:9925:138: warning: format '%d' expects argument of type 'int', but argument 5 has type 'OMX_U32 {aka long unsigned int}' [-Wformat]
make: *** wait: No child processes. Stop.
That is the last fine before it gives me control of terminal again.
newbcake said:
I tried compiling CM10, and am even having problems with that. Google did not seem to help for this. Here is what I did:
I did the mka, then mka otapackage, and NOTHING is appearing. No zips at all.
Code:
hardware/qcom/media/mm-video/vidc/vdec/src/omx_vdec.cpp:9925:138: warning: format '%d' expects argument of type 'int', but argument 5 has type 'OMX_U32 {aka long unsigned int}' [-Wformat]
make: *** wait: No child processes. Stop.
That is the last fine before it gives me control of terminal again.
Click to expand...
Click to collapse
a few tips
typically, compilers only stop when there's an error, not warnings (unless you set flags like -Werror )
compiling is parallelized.... let's say you have a quad core, you can compile 4 projects simultaneously... when you have an error on the first make file, it stops.... but the other 3 projects will continue compiling and outputting logs until they're done (then the scheduler sees the first make file has an error, doesn't execute any more make builds and halts), so the last log file/line might not be showing you the error
For CM10.1, find5 is official now... you can just use brunch instead of breakfast/lunch & mka
paperWastage said:
a few tips
typically, compilers only stop when there's an error, not warnings (unless you set flags like -Werror )
compiling is parallelized.... let's say you have a quad core, you can compile 4 projects simultaneously... when you have an error on the first make file, it stops.... but the other 3 projects will continue compiling and outputting logs until they're done (then the scheduler sees the first make file has an error, doesn't execute any more make builds and halts), so the last log file might not be showing you the error
For CM10.1, find5 is official now... you can just use brunch instead of breakfast & mka
Click to expand...
Click to collapse
In essence, I scour the log for errors?
I just presumed as CM10 already existed on the Oppo Find 5, it would be an error-free compile.
newbcake said:
In essence, I scour the log for errors?
I just presumed as CM10 already existed on the Oppo Find 5, it would be an error-free compile.
Click to expand...
Click to collapse
you could source the log for errors
or just run the compile script again and again.... the scheduler will continue building other packages, but it'll come to a point where it can't build anything else without that broken package.... and hence, the error in the log will be obvious(since everything else is already built, no logs from them)
it should be an error-free compile, but sometimes things could happen (a small tweak in package/A gives some problems when compiling with package/B)
I would say, most likely there's some build package incompatibility in your system.