Charging Problem - Nexus 10 Q&A, Help & Troubleshooting

I am having trouble charging my tablet. When the tablet is on, I am unable to charge with either the POGO or USB cable. I have also tried other wall chargers for cell phones. I was not using any roms, but had tried out the ktmantra kernel. I have since wiped my tablet using a factory 4.2.2 image from google and am still having the charging problem.
The only way I am able to charge is by charging with the tablet off. It also takes ages to charge (12+hours). Any ideas on what could be causing this? When I plug the POGO cable in, it says it is charging, but the battery percentage continues to drop.

ab325 said:
I am having trouble charging my tablet. When the tablet is on, I am unable to charge with either the POGO or USB cable. I have also tried other wall chargers for cell phones. I was not using any roms, but had tried out the ktmantra kernel. I have since wiped my tablet using a factory 4.2.2 image from google and am still having the charging problem.
The only way I am able to charge is by charging with the tablet off. It also takes ages to charge (12+hours). Any ideas on what could be causing this? When I plug the POGO cable in, it says it is charging, but the battery percentage continues to drop.
Click to expand...
Click to collapse
I've readed some comment on another forum from an user that has the same proble, but for him it takes about 10h. Not sure what's wrong.

Are you not able to charge at all or just very slowly? I just noticed that my Nexus is charging very slowly with the Pogo cable I purchased. I may try going back to the usb cable to verify that the problem is with the cable and not with the tablet.

I was getting very slow charge rates with my usb charger. Around 12 hour charge times even when completely powered off. Anyway, my problem was with using a USB extension cable. Since I started plugging it directly into the wall I've been seeing charge times in the 5-6 hour range. My iPad never had an issue with it, but whatever! You might also try a different wall outlet.
Sent from my Nexus 10 using Tapatalk HD

I cant seem to solve this problem. I have tried using pogo and usb cables with two different chargers. I have also tried using different wall mounted phone chargers. I am not able to get any positive charge while the tablet is on. Using the battery monitor widget, I used to see a +1800 charge with the pogo, and a bit less with the usb cable. Now, the highest I get is -500.
I am only able to charge when the tablet is off, although very slowly. I had it charging all night, and it is now at 60%
When I plug the pogo cable in, the tablet will say it is charging, but it really isnt doing anything.
Any ideas?

ab325 said:
I cant seem to solve this problem. I have tried using pogo and usb cables with two different chargers. I have also tried using different wall mounted phone chargers. I am not able to get any positive charge while the tablet is on. Using the battery monitor widget, I used to see a +1800 charge with the pogo, and a bit less with the usb cable. Now, the highest I get is -500.
I am only able to charge when the tablet is off, although very slowly. I had it charging all night, and it is now at 60%
When I plug the pogo cable in, the tablet will say it is charging, but it really isnt doing anything.
Any ideas?
Click to expand...
Click to collapse
Recalibrate battery? It's probably not going to work though. RMA the tablet as a last resort.
Sent from my Galaxy Nexus using xda app-developers app

How can I recalibrate the battery?
Im in Europe until June, so Im assuming it wont be easy to RMA.

There is also a strange thing going on with the usb cable. My computer is unable to detect it as a storage device. When I plug the charger in, it will not show up as charging when the tablet is on. But, I am able to access the tablet via fastboot.

Where is that oficial pogo charger from samsgoogle? 4 month and counting... 2 Biggest companies în the world are unable to produce a simple cable... Hillarious
Sent from my Nexus 10 using xda app-developers app

The N10 charger is a 2 amp charger and most phone chargers are 1 amp chargers. The N10 will charge slowly with a 1 amp charger if it is powered off, however it needs 2 amps to run the N10 and charge at the same time. Also I have found that not all USB cables are created equal, you may want to try another usb cable. I do not know anything about the pogo chargers. Hope this helps.

Related

Now my phone won't charge

Totally stock (but i don't think it matters).
Plug the phone in, orange LED comes on.
Hold it or place in on the counter five seconds later, LED is off.
Had the phone since 6/4.
Anyone else having issues?
Are you using the AC charger ? I have two Evos and one of the chargers does what you are describing. The orange LED comes on and then goes off after a while and the phone stops charging. Does it on both phones, the other charger works fine with both usb cables.
Are you using the USB charger with a computer or laptop or plugging straight into the wall with an AC charger?
This does make a difference because if you are charging with a USB + laptop combination you could be suffering from the computer going to sleep and disabling the USB ports power to conserve laptop battery life. If you are having the issue when plugging into the wall, try plugging into a computer and selecting the "Charge Only" option when your USB debug comes up. Once it does this, allow it to charge for a period of time and then turn the phone off, switch to AC power plug and see what happens.
Perhaps you had some kind of over voltage spike on the charger through the AC plug. I could see it possibly tripping something in the phone to stop taking charge to protect the handset.
Also make sure if you do use a laptop, use a USB 2.0 or better port. More power and faster connection. Gotta love it.
Your charger may not be sourcing enough current anymore (for whatever reason). I have seen the exact same behavior with USB car chargers that were only sourcing 100-150mA.
Have you tried plugging the USB cable into a modern desktop PC? (Some laptops have reduced current ports, so a desktop is a safer bet)
Its definitely a current issue. I tried to charge my phone using my bluetooth headset's wall charger, but I got the behavior you are describing. The bluetooth headset's charger just doesnt put out enough current.
Are you using the charger that came with the phone? if so, you may want to exchange the charger...
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
tarheelsmj12001 said:
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
Click to expand...
Click to collapse
Probably not a driver issue, but that that rail from the power supply is either undervolted (say 4.6V instead of 5V), or can't provide enough current (amperage) or both. If I recall correctly, the Evo needs 5V @ 1A (+/- 3% tolerance).
Phone not charging
my phone has been charging fine since I got it... even been using the night desk clock app while sleeping at night for the alarm with it plugged in... everything was good...
With my phone about to die today, I plug it in to the wall charger, the led/batter indicator shows that it is charging... then POW.. it says I have a low battery and it needs to be plugged in... WTH??? it is plugged in!
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Weird thing now is that I took my hero battery and put it in my EVO, plugged it into wall charger, and it stays charging... So, I put my EVO battery in my hero, plugged it in, and whola... it's now charging...
Please help as I am baffled.
MILH0U5E said:
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Click to expand...
Click to collapse
that's your problem right there. that custom kernel is known to have charging issues.
I'm having the same issue with my car charger consistently. Plus my AC charger less consistently. For example, I'll go to bed and plug it in, the next morning I wake up and see the phone is at 80% charge and isn't charging. At some point over night, it gave up. This is with the stock charger too.

Charger issue

I haven't seen anyone else complain about this, so it might just be a small defect or isolated incident.
I always charge my phone during the night while I sleep and just recently woke up to find the phone only at ~70%. For some reason the AC adapter seems to be malfunctioning. Since the issue has started, I managed to get it to charge to full one night, but the rest of the time it seems to stop charging. It recognizes it being plugged in initially but then it pops up with the notification saying that the charger has been unplugged. I've tried reconnecting both connectors which will sometimes get it to start charging for 15-30 seconds before it shows as disconnected again.
It works fine via USB connected to a computer so I can only assume it's an issue with the wall adapter. I'm not sure if there's much I can do if it is an issue with the adapter but wanted to see if anyone had any ideas that would be worth trying before I give up on the adapter. Also wondering if anyone else has had this happen.
I don't have that problem. Call and get it replaced. All you news is a USB AC adapter.
Have you checked the socket you are plugging the charger into? Have you tried a different wall socket or socket on the power strip?
Are you using a Motorola brand wall outlet and usb? I was using an aftermarket cable and had this issue. So I got a branded cable and now it's fine
Sent from my iPhone killer ATRIX using XDA Premium App
i had same issues
my atrix would only charge also to 70% so i was about to return it. i forgot that it also came with a stand alone battery charger to charge just the battery. charged it and then put it on my atrix and said 100% again. hope this helps..
Yeah get the wall socket and make sure that's not the problem. Also I can't imagine it being the cable I use a 15 foot after market cheapo cable I got off newegg for like 3 bucks and it charges my phone all the way and I don't even use the wall adapter moto gave me I use some random one that's for one of my old phone or my nikon camera I don't remember. Also moto cable is crap it doesn't let me use adb doesn't seem to push enough power to my phone.
But thats just my 2 cents
Sent from my Atrix
OEM charging cables > aftermarket/cheapo/gas station cables
Sent from my MB860 using XDA Premium App
Use the cables that come with the atrix.
Problem solved.
/endthread

Charging without Samsung AC Adapter?

I went out of town this week and made sure to grab my USB cable, but left the AC adapter at home figuring I'd just charge off my laptop via usb. Apparently not... I also tried plugging the USB cord into my iPhone AC/usb adapter with no luck. The only thing I've found is that when you turn off the Tab and connect to one of these devices, a green battery indicator will pop up showing that it is charging. Well, after about 16 hours, it made it from 15% all the way up to 48%. Does anyone know any way around turning it off to charge or why it is barely charging when it is off?
Jaydawgx7 said:
I went out of town this week and made sure to grab my USB cable, but left the AC adapter at home figuring I'd just charge off my laptop via usb. Apparently not... I also tried plugging the USB cord into my iPhone AC/usb adapter with no luck. The only thing I've found is that when you turn off the Tab and connect to one of these devices, a green battery indicator will pop up showing that it is charging. Well, after about 16 hours, it made it from 15% all the way up to 48%. Does anyone know any way around turning it off to charge or why it is barely charging when it is off?
Click to expand...
Click to collapse
Well seeing as it has a 7000mAh battery, just about any run-of-the-mill USB charger isn't going to cut it. The amperage would have higher as well. Now i would hazard that an iPad charger (10 watts) would probably work just fine vs an iPod charger.
Your laptop's USB port isn't providing enough juice to charge fully. With the screen off it will only trickle charge and very slowly at that.
You'll need at least 5 Volt 2 Amp chargers.
You can also try this:
http://forum.xda-developers.com/showpost.php?p=14890063&postcount=16
Or this:
http://cgi.ebay.com/190522553195?ru...ee-All-Categories&_fvi=1&_rdc=1#ht_3085wt_905
I've ordered both last week but neither have arrived yet. I'll report back.
You need a 5vdc supply that will provide 2A. 10W, not 5w as the previous post said. That adapter on ebay won't help the charge, it just disconnects the data line so it does not change its mode when connected to a computer. There are a lot of power supplies that will work and even more that won't, just made sure it supplies 2a. If you want to charge off your laptop then you will want a Y adapter similar to what is on usb powered hard drives but even then you will need to use 2 usb 2.0 or 3.0 ports and will provably only get 1a out.
Sent from my GT-P7510 using XDA Premium App

S4 will not charge with AC charger; only USB

Last night I was charging my S4 in my car adapter, but noticed the cattery was still going down. I went home and plugged it into my AC (wall charger) and went to bed. The next morning the S4 was dead and couldn't charge. The only solution was to plug it in my computer and went an hour for it to get some charge back.
I have a root i337m running rootbox 4.1, and I went into TWRP to wiped the phone and installed the ROM again - no luck.
Is this a battery issue, a software issue or a whole device issue? Thanks.
freddywhite said:
Last night I was charging my S4 in my car adapter, but noticed the cattery was still going down. I went home and plugged it into my PC and went to bed. The next morning the S4 was dead and couldn't charge. The only solution was to plug it in my computer and went an hour for it to get some charge back.
I have a root i337m running rootbox 4.1, and I went into TWRP to wiped the phone and installed the ROM again - no luck.
Is this a battery issue, a software issue or a whole device issue? Thanks.
Click to expand...
Click to collapse
I don't think its a rom issue. I tried charging via USB as well and had phone charging a few hours and it ate crap. So I only charge via AC outlet only. USB charges but at a very slow pace.
Reinaldo33897 said:
I don't think its a rom issue. I tried charging via USB as well and had phone charging a few hours and it ate crap. So I only charge via AC outlet only. USB charges but at a very slow pace.
Click to expand...
Click to collapse
I made an error in the OP - I meant to say I left it to charge on the wall and I got nothing.
Right now, the charge light doesn't even come on if I plug it with AC.
freddywhite said:
I made an error in the OP - I meant to say I left it to charge on the wall and I got nothing.
Right now, the charge light doesn't even come on if I plug it with AC.
Click to expand...
Click to collapse
Maybe see the results by changing the charger you're using?
r8revealed said:
Maybe see the results by changing the charger you're using?
Click to expand...
Click to collapse
I've tried 3-4 different chargers and cables, same issue. Charges slowly through PC,doesn't charge at all with AC. Did a factory reset after reverting to stock FW, no luck.
freddywhite said:
I've tried 3-4 different chargers and cables, same issue. Charges slowly through PC,doesn't charge at all with AC. Did a factory reset after reverting to stock FW, no luck.
Click to expand...
Click to collapse
I doubt it's a ROM issue, but there's no harm in reverting back to stock to see the results (assuming you've backed it up). If it all fails, i think you should unroot and send it to Samsung for the warranty. Software problems are somewhat easier to fix here than hardware, so it may be the best option to let Samsung handle it.
I had similar problems with my Note 2 before and now with my S4. What I found was, sometimes the usb cable wasn't tightly plugged into the wall charger. Once I've made sure of this, I've been able to charge (AC) every time.
I found this article that indicates that the S4 is looking for special sauce on the D+D- pins.
http://www.anandtech.com/show/6914/samsung-galaxy-s-4-review/2
Obviously the Galaxy S 4 will charge with any USB charger, but the charge time will simply be longer. Samsung uses a voltage divider and signals the presence of their own charger by sending 1.2-1.3 V across the D+ / D- pins, this is similar to what Apple does with 2.0 or 2.8 V across the pins for various USB chargers they've shipped over the years. This signaling is essentially Samsung's proprietary tablet charging signaling which they've employed on the Galaxy Note 2 and now SGS4, in fact the two use the same exact charger, so it's worth tossing out your old ones and getting the appropriate one to take advantage of the faster charging.
However I do not believe this to be 100% true. I think not all chargers will work..
I took a charger that is very vanilla (Wall charger but the D+D- pins are NC) and it works with the S3 and NEXUS7 but does not work with the S4.
This charger uses a stock USB cable so I took a wall charger that had gone bad but had a dedicated cable and hacked off the end and wired up my own cable...
That works! So it appears that the S4 will only charge properly with certain chargers that do something to the D+D- pins (either shorting them with a resistor like the article indicates
I then took a look at the cable I used to replace. It is a Motorola cable and it has the ID pin pulled high built into the cable... So I suspect that is required for the phone to work... But to fast charge it will need the special sauce indicated above!
Had the same issue and found the solutions which worked for me. Go into the developer mode and deactivate the usb debug mode.
Had the exact same issue. I took a soldering iron to my charging port on my phone. Problem solved. The ID pin had a bad joint.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I have a strange issue, my s4 is detected by pc, charges normally with usb ( wall or pc charge ) my battery is full but when I take the cable from microUSB port and s4 should work with the battery, turns off and consumes no battery, it's like refusing to use the battery and that it is full! battery checked on a sph l 720
I've tried installing other roms with safestrap but I still have the same problem, refuses to consume battery and while the battery is at 100% ,my s4 shows 0% if I disconnect the usb cable... game over. However, I can be on the safestrap menu for hours only with the battery, no problem, is a problem of rom I think but did not know how to fix it .. : (
I'm having the same issue as the original poster. The USB port is good, charges fine when connected to PC (although much slower because of different mVS). Have tried amidst everything and nothing fixes it. I've turned debugging mode off and back on, restore to backup, complete wipe and reinstall of 2 ROMs with and without apps, fix permissions, different kernels, different USB cables... The adaptor is in good condition. But when plugged in while on my phone doesn't recognize that's it's connected. Previously out would give a false charging reading. If off sometimes I got the grey bar battery but note is just vibrating every few seconds. Idk what to do...
crazy_dr0id said:
I'm having the same issue as the original poster. The USB port is good, charges fine when connected to PC (although much slower because of different mVS). Have tried amidst everything and nothing fixes it. I've turned debugging mode off and back on, restore to backup, complete wipe and reinstall of 2 ROMs with and without apps, fix permissions, different kernels, different USB cables... The adaptor is in good condition. But when plugged in while on my phone doesn't recognize that's it's connected. Previously out would give a false charging reading. If off sometimes I got the grey bar battery but note is just vibrating every few seconds. Idk what to do...
Click to expand...
Click to collapse
I'd guess it's the charger. Get a new one
Sent from my Nexus 5 using XDA Free mobile app
I had the same problem. S4 will recognize charger as USB charger, not AC. solution was to clean usb port connector, was some cloth covering wires. then restarted and worked ok
I am having trouble charging the phone the same way. I have reset the phone 3 times and still can't get a charge.

Charging problems

I just got my Note 3 working thanks to this group. When I first got it, it was without a battery and was locked by PIN. I was able to wipe it to factory conditions, but now it will not charge. It charged right away when I first got a replacement (OEM) battery, but then, I did the system factory reset, and now it will not charge. I am using a USB 3.0 cable and connecting this to my Apple charger I got with my iPhone 6 as I don't have a specific charger that might have come with the Note 3...just a generic USB 3.0 cable and the iPhone 6 charger that the USB cable plugs into. Any thoughts for me to try?
Try plugging the cable into a computer. It might not charge fast but it will let u know if it will charge or not. Iphone charger might not be compatible so battery will not charge.
If I helped Hit the Thanks Button Like This?
S2_brickmaker said:
Try plugging the cable into a computer. It might not charge fast but it will let u know if it will charge or not. Iphone charger might not be compatible so battery will not charge.
If I helped Hit the Thanks Button Like This
Click to expand...
Click to collapse
I have tried using the computer and that is part of my confusion...the phone will indicate it is charging...but it doesn't. I get the same indication whether I am using the computer with USB 3.0 cable, or using various wall charger pods with the same cable. It will show the charging symbol (lightning bolt) or, if turned off, but plugged in, it will show the upflowing green drops rising toward the battery. So, it seems to indicate it is charging, but the charge percentage never increases...only drops.
AUsome360 said:
I have tried using the computer and that is part of my confusion...the phone will indicate it is charging...but it doesn't. I get the same indication whether I am using the computer with USB 3.0 cable, or using various wall charger pods with the same cable. It will show the charging symbol (lightning bolt) or, if turned off, but plugged in, it will show the upflowing green drops rising toward the battery. So, it seems to indicate it is charging, but the charge percentage never increases...only drops.
Click to expand...
Click to collapse
It's not unheard of for a brand new battery to be defective. If you know someone else with a Note 3...try swapping batteries with then and see if the problem moves with the battery.
There is nothing in a factory refresh that would effect the charging circuit.
Sent from my Note 3 via Tapatalk

Categories

Resources