[Q] B528 rooted but can't install CWM - Huawei Ideos X5 U8800

Hi guys,
I have gone back to factory 2.3.5 B528 and then rooted the phone so I can install another ICS ROM (I was using Aurora 4.0 but too many lags).
I have tried to flash recovery.img so many times, different methods, but I just cannot get it to flash and boot to recovery.
"Power + Vol Up" just loads the Huawei logo and is stuck there..
Thanks.

uthmani said:
Hi guys,
I have gone back to factory 2.3.5 B528 and then rooted the phone so I can install another ICS ROM (I was using Aurora 4.0 but too many lags).
I have tried to flash recovery.img so many times, different methods, but I just cannot get it to flash and boot to recovery.
"Power + Vol Up" just loads the Huawei logo and is stuck there..
Thanks.
Click to expand...
Click to collapse
I actually solved this now. Used an older recovery.img and it worked.

Related

[Q] Everything i trying to flash failed.

Hi.
I have a defy plus .2.3.6 rooted with 2ndinit recovery.
every ROM I've tried to flash makes the phone stuck in bootloader menu, so i had to flash SBF again.
am i do something wrong? I've flashed a lot of roms on defy mb525, and everything worked fine.
thanks and sorry for my terrible english.
Sow now you are stuck in bootloop or you can not flash a custom rom?
I just flash SBF and go back to stock rom.
try wiping data in stock recovery .
(if you access it)
No access to recovery. boot right to the bootloader.
Reply!
Firstly is your defy rooted? If yes, install 2ndint and go to recovery by switching off your phone and press volume+ and power on button.
The problem you are facing is because you are not clearing cache before flashing a custom rom. Happened to me once so i know! Follow this procedure to the line and you should be fine!
http://forum.xda-developers.com/showthread.php?t=1663613
Hmmmmm
What bootloader you have? I think... v7
Teoretically you can use any 2.3.6 ROM
Yup, V7.
The only rom I was able to install it is CM9.
I'd tried this:http://forum.xda-developers.com/showthread.php?t=1667536 with the same results.

What happend with my X5?

After hours of reading in this forum and testing a lot of possible solutions my x5 still doesn`t work.
Some days ago i had installed the 4.2.2 CM10-Rom. Today i want back to Aurora and i make the mistake to format boot in CWM Recovery 5.5.04
Tried to boot but only a bluescreen on the phone. I tried to install dload with external sd. (gingerbread 528). Update Step 1 & 2 were sucessfull, but on reboot the "firework"-logo loads again and again. CWM Recovery was now away and the original E3 was as Recovery. With the 528 it was possible to do pink screen and i replace original recovery.img with the 5.5.04 recovery.img. This works and i tried to install aurora. Installation is sucessful but on reboot it stands on the first huawei logo.
Then i remember that i had to install a new partition to use 4.2.2. With CWM Recovery i installed the original partition and tried again to install Aurora. Did not work, phone stands on Huawei Logo.
Where is my problem? What should i do to use my phone again?
Many thanks!
Update 1: Phone boots! I`ve installed this rom U8800V100R001C00B517G001 (Beta1.0)(Overseas Normal)(Gingerbread) from pinkscreen without battery. This ist the first rom which boots.
What should i do now to com back to Aurora?
Update 2: Everything is fine! Had to root again. Then install CWM Recovery. Then install Aurora. I`m happy now!
Wow. Sorry I'm late. It looks like you've already solved your problem.

[Q] Flashed JB Rom directly from HC using older Recovery (1.3.4). Now it`s Boot loop

Hi,
Guys I need your help on this one.
I sold my A500 almost a year ago to a friend of mine. At that time I flashed it with a HC ROM and Recovery 1.3.4.
Last week the new owner of the tabled asked me for help updating the ROM to JB. Since now I use a Samsung Galaxy I completely forgot on the correct procedures to update the Acer A500. I simply downloaded a 4.2.2 Rom and tried to flash it on recovery mode.
After that I'm stuck with an endless loop. The tabled boots, pass the Acer logo, shows the ROM logo screen and than boot again.
Since I can still acess the recovery screen (it still shows 1.3.4 recovery) I tried flashing other ROMs with no sucess. Every room that uses the Aurora installer freezes as soons as Aurora Installer message shows on the screen. So I wasn`t able to flash a new Rom or a new Recovery (since all the Roms and recovery that I have found uses the Autora installer).
I also tried to install an older room (Tried the Lightspeed 2.1 ROM) and although I was able to flash it and reboot from recovery, it stops on the boot screen after that (I waited for 4 hours).
Can you guys help me with this one? Also, do you guys know if I can install a new Recovery using Odin?
Thanks
Anyone?
Maybe you should try flashing stock rom. Download 》rename it to update.zip》install from sd card or use EUU roms.
poslato sa elmag radija

[Q] I just see M logo. Please help

Hi guy's
i have ME722 (milestone 2 china version blur) i bought it with cyanogenmod 4.3 firmware on it.but it was working so slow and i wanted to turn it back to cyanogenmod 2.3.6 or something like that which works easy,i downloaded 3 different firmware and copied to SD card ,i used power +x and after seeing android logo i pressed Vol+ Vol- together then i got menu,i pressed wipe cache and reset factory,then i go to update from SD card and when i'm trying to load zip files it say's signature error and nothing happens ,i should say i lost my ex cyanogenmod 4.3 firmware and now i just see Red M logo with nothing for loooong time when i press power, help me how to start as a noob and how to install new ROM or solve problem.thanks.
Stock recovery (accessed with holding x or @ during boot, then vol up + down) cannot flash custom ROMs. You have to flash CWM recovery first. But if you're stuck with Motorola logo, I think the only thing you can do is flash stock GB ROM with RSD Lite program under Windows. After that you should get a running fresh GB ROM (you might have to perform full system/cache clean from stock recovery). Then you have to root your phone (with gingerbreak exploit), then install "droid bootstrap" application, which flashes an early version of CWM recovery, then reboot, and while there's a blue led light press vol down to enter custom recovery. With it you should be able to flash CM10.1 ROM, which will update CWM to a version that is able to flash modern 10.2/11 ROMs.
I hope these tips help.

[Q] Motorola Defy Stuck In Android Logo After Rooting And Installing 2init Recovery!

i Rooted My Defy ... Then Installed 2init Recovery Using App From XDA.
It installed Succesfully..but after restarting Its Stuck In The Infinite Android Logo.
I Can Go Into My Recovery By Pressing "POWER+Volume Down"
Tried factory reset,wipe cache!!!
Still Not Working.
Please Help...!!!
Thnks In advance..!!!
baba_95 said:
i Rooted My Defy ... Then Installed 2init Recovery Using App From XDA.
It installed Succesfully..but after restarting Its Stuck In The Infinite Android Logo.
I Can Go Into My Recovery By Pressing "POWER+Volume Down"
Tried factory reset,wipe cache!!!
Still Not Working.
Please Help...!!!
Thnks In advance..!!!
Click to expand...
Click to collapse
Hi, what do you want to do ? install cyanogen ? Stay on stock android ?
Does anyone have the answer? I have exactly the same problem with my DEFY. It is strange because I have been changing roms several time always using the same combination: Gingerbreak1.2, 2ndinit2.0 and then a new rom. Of course all after flashing Froyo. All the files I have on my computer so it's not the matter of wrong .apks or something like that...

Categories

Resources