Hey guys,
My sister's blade recently has got into a state where it only reaches the boot screen, however I am unable to diagnose the problem further currently as I am currently away at uni and my sister's at home.
In order to fix it I was just going to straight re-flash it, however I don't know if it's GEN1 or GEN2.
Thanks!
Josh.
TL;DR How can I tell which GEN a blade is from recovery mode?
Related
Hi, first time modding and I've come up with a problem.
Baisically what's wrong now:
Phone is stuck at large green android logo when I turn on the phone.
Can't boot into Cyanogen
Can't get Clockworkmod to open
Phone only turns off with a battery pull
How I got the phone to this point:
Followed the instructions at wiki.cyanogen
(Backed up with titanium backup pro)
The first time I installed the mod I got stuck in a boot loop. But I fixed this by deleting data and cache in Clockworkmod and going through the steps again.
The phone and it's new mod seemed to work. I installed the google apps.zip, via CLockwork, still fine.
Then I tried to reinstall apps from Titainium Backup.
Some of these went well, but I started to get 'com.google.process.gapps' stopped working force close notifications.
I rebooted to see if that would make them stop.
But I got stuck in a boot loop of the Cyanogen animated logo, where it would boot, show me the unlock screen, I would unlock it, get another 'com.google.process.gapps' message and the phone would then freeze and reboot. The sequence then continued.
I tried battery pulling and tried to boot into Clockwork by holding down Menu Up and Power. But not after a while it just shows the green android logo. HELP.
I didn't read all!
So...
this problem is easy fix!
I spent 3 Hours with my blade to get my Blade II to work!
you have same problem which some other has posted somewhere here...
search on google or on Modaco: ZTE Blade TPT GEN1 or GEN2...
follow instructions!
now Blade II needs to work!
http://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Got a ZTE Blade here which is playing up. I can get into CWM so that's a good start, but no matter what ROM I install it just gets stuck on boot, constantly looping the green Android robot logo.
I'm trying to help out a friend with this so I'm not familiar with the Blade at all. It originally had an old version of Cyanogenmod but that was incredibly buggy so needed updating. After wiping it though I've not been able to get it back to working order.
Any ideas what is up with this thing?
When u boot into cwm, did u wipe data and cache before flashing the rom?
Dear I have a dell zte blade when i switch on it stop at dell logo and nothing happen and its not goes in recovery mode.
Its happen when i try to install new custom rom from internet i dont no that site name.
Thanks
So I got my phone back from warranty and it was working fine, until it recently started freezing and crashing, until one day it kinda died.
When I turn on my phone it just gets stuck on the LG logo, I tried everything, tried KDZ and flashing official and custom roms, tried the support tool to flash the original LG rom, nothing
The phone still gets stuck on LG screen, it doesn't boot to recovery mode either regardless on whatever is on the recovery partition
At this point I don't know what else to do, help please?
Thank you
ZTE Blade A6 Lite guys help to get (root)
Good day, need help,
there is a zte blade A6 lite, everything worked fine, but then one day hung on the screen saver and cyclically started to reboot.
All firmware which found in online; it is ZTE_NMF26F_ZTE_BLADE_A 0622_7_1_1 and update
on this and neighboring forums., I can go to the standard bootloader and update with a flash drive and the update file, it picks up, and it seems even that it loads, but after rebooting the same, hanging on the screen saver and reboots.
and other firmware., recovery update can't.
Help or guide in the right direction, Thanks in Advance.
Good day, need help,
there is a zte blade A6 lite, everything worked fine, but then one day hung on the screen saver and cyclically started to reboot.
All firmware which found in online; it is ZTE_NMF26F_ZTE_BLADE_A 0622_7_1_1 and update
on this and neighboring forums., I can go to the standard bootloader and update with a flash drive and the update file, it picks up, and it seems even that it loads, but after rebooting the same, hanging on the screen saver and reboots.
and other firmware., recovery update can't.
Help or guide in the right direction, Thanks in Advance.[/QUOTE]
The indicator is constantly on in red, even when turned off, what could it be? Do not depend on the battery level.