Database Users

problems with 8525 Lost Radio & gms

first thing done to the phone was to use Hard-SPL-V7 then I used OS 5.2.20924 (Build 20924.1.5.0 PV DVH) Black(Full) BS V27.exe changed to Schaps_WM6Pro_WWE_3.57a_Full_28-07.exe
phone work great radio was fine for a week and lost it yesterday change back to Hard-SPL
I can't load any radio alone but loaded full roms tried RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30.00_108_Ship loads all the way but no radio

Are you sure the stock rom had a radio rom in it? If you got from here and tried it may have been a stripped rom. Try running the Shipped ROM. It may recover or may not. Radio roms are the Achille's heel of the Hermes...

hi dear Ultramag69
i have same problem with jasjam model(i dont have radio-imei-protokol)'can u help me & say what model of radio rom must i install on my devic.pleas if u know send me some web linke for downlod .
i have a puestuion too.how can i install telestra roms on device by micro sd pattern becuse that file is exe file & dont have nbh(that i need to cheng hermimg)
thanks

please help me
ultramag69 said:
Are you sure the stock rom had a radio rom in it? If you got from here and tried it may have been a stripped rom. Try running the Shipped ROM. It may recover or may not. Radio roms are the Achille's heel of the Hermes...
Click to expand...
Click to collapse
hi dear Ultramag69
i have same problem with jasjam model(i dont have radio-imei-protokol)'can u help me & say what model of radio rom must i install on my devic.pleas if u know send me some web linke for downlod .
i have a puestuion too.how can i install telestra roms on device by micro sd pattern becuse that file is exe file & dont have nbh(that i need to cheng hermimg)
thanks

satriani22, right click on the .exe file . It should have the option to "extract here". This will give you all the file. I believe you will need to search through the folders to find the RUU_Wrapper.nbh file.
Copy to an sd card formated FAT32 (must be 2Gb or less) and rename to Hermimg.nbh. Put in Hermes & reset to bootloader. Follow the prompts.
YOU MUST HAVE HARD SPL INSTALLED TO DO THIS.
This is not a sure fire way to fix this problem, you may not be able to fix this...
Make sure you flash the SHIPPED STOCK ROM, not just a stock rom from anywhere.
Good Luck...

Any Idea or link where I can get the stock radio could use the help still a little lost ..

What carrier supplied the device? If it was AT&T, doo a search for the AT&T ROM. I don't know if they still have an upgrade on their site as most carriers don't support the Hermes anymore.

Radio
downloaded radio1.54.07.00 which is strip out of AT & T rom tried from computer to flash fail loaded the RUU_signed.nbh renamed it to hermimg.nbh copy to sd tried gets about a quater of the way and locks up any ideas ?

Sorry I didn't get back to you yesterday mate, bit busy.
I hate to be the bearer of bad news but it may be that you have a permanent brick on your hands....
The radio rom is the number 1 cause of permanent bricks. If the memory area of the radio is corrupted then its impossible to fix. I have yet to see ANYONE say that they have permanently recovered the radio rom successfully.

*Noob in need of help with Themes..pleasee !

hey XDA
i have a CDMA version of the touch diamond, so can someone help me with downloading themes with the CDMA version? because ive tried other ways but it doesnt seem too work
so if anyone could help it would be greatly appreciateedd !

If it is a .theme file you will need to install a program (name slips me) otherwise .cab files seem ur route.

you need to download tf3d config v.67, its somewhere here in the forum. i actually attched it for you. from there you just have to download the themes and run the program.

when i installed it, and tried to run it, it was unexpected error occured?

How to upgrade radio ROM for Artemis?

Hi everyone. I'm so sorry that this has to be a "dummy" question...
I have been running the WM6 Black & Blue v5.0 for a few months. I managed to unlock CID and flash the ROM etc thanks to the very useful step-by-step posts I have found here (THanks!!).
However, the phone function seems to be playing up, e.g. phone appears to be on but unable to receive incoming calls. Therefore I would now like to upgrade the ROM in the hope that it will solve my problems (mine is currently at manufacturer's v.02.67.90). I have downloaded the files for v.03.21.90.
So here's my dummy question.... what am I supposed to do with the files? Do I just run the RUUUpdateUtility file and follow the onscreen instructions? Or do I need to do something with the NBH file or with the other files?
I have tried searching the forum, but have not found anything....
Thanks so much again!

Radio Rom
Hi Racquelle
You only need to run the RUUUpdateUtility
But before you do did you perform a hard reset after flashing the new rom?
as this will generally solve most problems
Also it would be a good idea to do a search for POF the god of all things unlocking and USPL. The information and programs you can find from him are priceless.

HELP!!! tri-color appears on my HTC P4350

hello...
gud day to everyone..
Pls help me on how to get rid of this tri-color that appears on the screen of my htc p4350 with an IPL 4.17.0002 and SPL 4.17.0000 written on it.. I really don't know what to do with this problem.. help me pls. pls. pls.
thank u so much..

1. This is the development forum. Your post is not a development post.
2. This has been covered a million times. Please search.
3. The tri-color screen is your bootloader. What did you do in the first place to get to this point? The more information about your problem that you give, the easier it is for everyone else to figure out what happened.

Hello..
Thank you for the reply...
I'm so sorry for posting in a wrong thread... What happened was.. I accidentally installed a wrong application on my phone.. The application I installed was for HTC touch.. so it was not compatible on my phone.. Everytime I turned on my phone the tri color screen appears and it displayed on the screen all the time.. I could not also hard reset the phone because of that tri color..
Pls help me what to do.. thanks much..

What "application" was it? Was it a ROM? Was it a HardSPL?
If it was a ROM, just flash another ROM.
If it was a HardSPL, search for "Goldcard" and create a goldcard.

hello..
The application I installed was the Touch-flo application.. But the application was saved on the memory card.. when I run the application, its when the tri color starts to appear..
Thanks much...

Can you give me an exact link to the application that you used?

Sorry I could not anymore remember what site it was.. It's been 6 months now that my phone was not working... It's only today that I discovered this site and I was so happy coz maybe u can help me..
thanks

Without knowing what program you used, it will be harder to figure out how to fix it.
The only thing I can say is:
1a) try to flash a Herald ROM through SD (read the walkthrough) (if your device is HardSPL'd)
1b) try to flash the stock ROM through SD (read the walkthrough) if your device isn't HardSPL'd)
2) If you still can't get past the bootloader screen, try searching for the word "goldcard" and follow those instructions on how to create a goldcard. You can use the goldcard to restore your phone back to working condition.

i'll try these options..
thank u so much..

hi ivan.. i have some questions regarding gold card.. i'm really new to this & don't have that much idea.. hope you can help me... thanks..
I have done the previous steps but I couldn't get this..
Ad.4) run Perl Package Manager from Windows Start Menu
change PPM Preferences (run Preferences from the Perl Package Manager menu and switch to the repository tab):
- Add repositories:
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm (there are many files on this location & i don't know what to download)
- Add repository:
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml
After database synchronization install those packages (at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon)):
-Crypt-DES
-XdaDevelopers-NbfUtils
by the way, i'm using Windows XP service pack 2.. is it okay? eventhough the requirements is SP3? thanks much..

hello.. i'm so desperate.. could someone help me on this.. pls pls.. \
thank u so much...

SOMEONE PLEASE HELP ME ! how do i install the .nbf file? ive done every other step

i dl the mds 6.5 rom ive done everything else needed now i just need to install the .nbf file how the hell do you install it i dont see a updater utility anywhere . if it matters i have a G3

i finally got it woo running mds 6.5 on my 8125

just curious, tell us your solution plz
got the same problem

i just used the english update utiility in this thread with the msd series 6.5 rom and it worked fine . course you have to go through all the other steps to cid unlocking and all
http://forum.xda-developers.com/showthread.php?t=291215

Thank you. Succesfull update on my wizard.

You can also use the Wizard Service Tool (http://forum.xda-developers.com/showthread.php?t=329170), first unpack the .nbf file, then flash the single .nb files to your phone.