Related
i successfully updated to froyo from kies. before this i had the stock rom and did not install any custom one
after updating my proximity sensor works when the phone is held vertical in an upright position
but after making a call, if i keep it on the table and close the sensor, the screen doesn't turn off. it should turn off and was working fine in 2.1 for me
can you guys confirm if the sensor turns off even when laid flat on the table?
also, the volume up/down button does not silence the ringtone when i get a call
please reply so that i can confirm whether the problem is with my phone or with the new release.
Not sure about the sensor problem but as far as your second problem is concerned hold the vol down button for a few seconds to mute the ringtone
Sent from my GT-I5800 using XDA App
Proximity Sensor is problematic
Yes The Sensor does'nt seem to be responding towards the end of the call. Just use the home key to light up the screen.
The display screen timeout settings does not automatically turn off even after specified time.this happens very often and need to enable screen timeout settings again and again.
Sent from my GT-I5801 using XDA App
Yes , I am experiencing problem with Swype , it is not responding to aby gesture. I am able to type using swype as regular keypad but not as "swype". I resetted my phone 3-4 times but i wasn't lucky.
So i am using keypad only. Its official DDJP2 FROYO version thpugh its flashed using odin as i was experiencing problem with KIES.
I am experiencing some strange behavior in media and notification sound. while i play some song and want to lock my screen from power button, some glitchy sound is coming, same happening when some messages coming. is anybody experiencing the same. plz try it with headphone attached while playing a song and just lock the screen from power button menu...
satyamsit said:
I am experiencing some strange behavior in media and notification sound. while i play some song and want to lock my screen from power button, some glitchy sound is coming, same happening when some messages coming. is anybody experiencing the same. plz try it with headphone attached while playing a song and just lock the screen from power button menu...
Click to expand...
Click to collapse
May be you have checked "screen lock sounds" option in /settings/sound unchek and see if the problem persists...
deadwood01 said:
May be you have checked "screen lock sounds" option in /settings/sound unchek and see if the problem persists...
Click to expand...
Click to collapse
Thanks a lot for ur reply but the option is unchkd from beginning ... ..
satyamsit said:
I am experiencing some strange behavior in media and notification sound. while i play some song and want to lock my screen from power button, some glitchy sound is coming, same happening when some messages coming. is anybody experiencing the same. plz try it with headphone attached while playing a song and just lock the screen from power button menu...
Click to expand...
Click to collapse
Yes....This is happening
This is the worst release by Samsung , as per me....Even on call if you are using headphone, you will hear clicking sound (argh)
Yes the proximity sensor isn't working fine. Screen does not turn on after a call. So I need to press home screen every time.
And long pressing menu button in call log does not enable search bar which happened perfectly in 2.1
maverickgenius said:
also, the volume up/down button does not silence the ringtone when i get a call
please reply so that i can confirm whether the problem is with my phone or with the new release.
Click to expand...
Click to collapse
For those who r facing the problem silencing the ringtines from vol up down, press power on off button, it shud work.
satyamsit said:
For those who r facing the problem silencing the ringtines from vol up down, press power on off button, it shud work.
Click to expand...
Click to collapse
we do know about pressing the power on/off key but that also switches off the sceen. but volume up/down only silences the ringtone but doesn't switch off screen.
araandroid said:
Yes , I am experiencing problem with Swype , it is not responding to aby gesture. I am able to type using swype as regular keypad but not as "swype". I resetted my phone 3-4 times but i wasn't lucky.
So i am using keypad only. Its official DDJP2 FROYO version thpugh its flashed using odin as i was experiencing problem with KIES.
Click to expand...
Click to collapse
swype doesn't work because languages are not installed. root, delete swype, install swype from official site.
jaskiratsingh said:
Yes....This is happening
This is the worst release by Samsung , as per me....Even on call if you are using headphone, you will hear clicking sound (argh)
Click to expand...
Click to collapse
and during a call, if you press volume up/down button to increase/decrease the volume, the voice breaks for a second and you hear a clicking noise.
these problems are seriously irritating me. thinking of going back to 2.1 or some custom ROM is samsung does not release an update fixing these problems.
Few more problems that I had observed....
1. If you open contacts and press back button you won't be going any where
2. Previously I used to connect my phone using bluetooth to my PC (Ubuntu) but now even after turning on my Bluetooth along with visiblity phone is not visible. Once I was lucky and recognized my phone as "V5" though the device name is different.
3. If you try to add pics to the contacts from your gallery the time taken is very long which was not the case with Eclair 2.1
4. Previously with Launcher Pro plus on Eclair I never had to "Force close" any application, but after upgrading to Froyo the first call itself raised a warning for force close. Even after sometime in my other call I couldn't End my call as the screen was not responsive.
After a struggle for One day on latest Firmware I feel that its not that worth to wait this much amount of time for official firmware.
techie.raj said:
Few more problems that I had observed....
1. If you open contacts and press back button you won't be going any where
After a struggle for One day on latest Firmware I feel that its not that worth to wait this much amount of time for official firmware.
Click to expand...
Click to collapse
I was experiencing the same problem on the first day, but after that i rooted my phone and installed busybox. from last 2 days did not find that contacts back key problem anymore.. i dont know its a temporary fix and what has fixed it anyway...
but really .. somehow this release is not at all convincing. so sad.
techie.raj said:
After a struggle for One day on latest Firmware I feel that its not that worth to wait this much amount of time for official firmware.
Click to expand...
Click to collapse
i too feel the same way mate..
can anybody tell me if I5801ZHJPF better that DDJP2?
I have another different problem my battery life is not going above 10 hrs while on 2.1 i used to get 18hrs. Am i missing some setting or what.I am gonna install something else if this **** firmware does not improve in the next update
i think this update was hastily released.
many bugs in it.
if you see the in-built task manager, the "uninstall" button is not even properly designed.
even accelerometer has some problems
the worst bug ever is the camera bug
theres this geo-tagging option..
until you get a fix on ur location camera will force close..
and it cant be disabled at all..
the only way to get around it is to use 3g or disable network mode in 2g..
19.nvv.11 said:
the worst bug ever is the camera bug
theres this geo-tagging option..
until you get a fix on ur location camera will force close..
and it cant be disabled at all..
the only way to get around it is to use 3g or disable network mode in 2g..
Click to expand...
Click to collapse
i saw somewhere that this can be solved by disabling "use wireless network" option in settings->location and security.
not sure though. try it.
maverickgenius said:
i think this update was hastily released.
many bugs in it.
if you see the in-built task manager, the "uninstall" button is not even properly designed.
even accelerometer has some problems
Click to expand...
Click to collapse
+ add one more bug to the list,
the microphone is also not working properly with different applications like Talking Tom or Talking Parrot, previously they used work on 2.1 without any problem or distrubance.
Did anybody also had the same problem?
One good thing with the Froyo update is previously my phone is used to restart unconditionally with the stock firmware (randomly sometimes during call or when Ideal). But till now no such weird behaviour in the current release.
Hi,
As anyone figured out how to disable the haptic/vibration feedback? I've gone to settings>sound>unchecked vibrate on touch but it doesn't seem to have worked. I also noticed that when I turned the volume all the down using either the volume rocker or the touch screen control, the vibrate icon appeared in the top right hand corner.
I received my N10 yesterday and think it's a great device despite some teething issues (which I hope an update in the near future will sort out!), but I want to figure out if the issue above is hardware related, in which case I'll ask for a replacement.
ninjasamo said:
Hi,
As anyone figured out how to disable the haptic/vibration feedback? I've gone to settings>sound>unchecked vibrate on touch but it doesn't seem to have worked. I also noticed that when I turned the volume all the down using either the volume rocker or the touch screen control, the vibrate icon appeared in the top right hand corner.
I received my N10 yesterday and think it's a great device despite some teething issues (which I hope an update in the near future will sort out!), but I want to figure out if the issue above is hardware related, in which case I'll ask for a replacement.
Click to expand...
Click to collapse
Did you try a reboot after changing the setting?
Also, when you turn the volume all the way down, it automatically turns on vibrate for notification. That's what that icon means.
tpayne1 said:
Did you try a reboot after changing the setting?
Also, when you turn the volume all the way down, it automatically turns on vibrate for notification. That's what that icon means.
Click to expand...
Click to collapse
I've rebooted after changing the setting but it still hasn't turned off. As for the automatic vibrate, I thought I could turn off the vibration even though if I turned the volume all the way down, kinda like selecting the silent option on your phone and turning vibrate off.
OK. To start with, my OTA didn't show up so I force stopped and cleared data of one of Google's services responsible for holding the OTA information. After that everything went smoothly. However, I noticed that my notification bar behaves just bizzare. When I'm trying to pull it down, it sometimes goes down, and sometimes just goes up (this only occurs when pulling down with 2 fingers). Now, it just stopped scrolling down at all... No response, totally. The screen is all fine, testes that in touch localization in menu. OK, after restarting the phone, it works again. With being pulled with only 1 finger everything is fine, but with 2 fingers it still glitches somehow. I wish I could go back to 4.2.1 now...
PS. Am I the only one that noticed there is no voice calls and ringtone volume control in lockscreen?
I'm on 4.2.2 (ota update). No major problems with the notification bar but it just doesn't feel as smooth as it was on 4.2.1. A bit jerky at times.
i noticed that too, but if i pull it down slowly it gets stuck right up to the part that shows the date, if i pull it down like i normally do, it's just as fast.
is this the issue that you're seeing or is it something else, try pulling it down quickly with your thumb
hope this helps
I had this issue when I flashed one of the versions posted in the Development section. I just flashed the official stock image and no longer have this issue.
Sent from my iPad using Tapatalk HD
im not on official rom on PA but the volume controls dont work in lock screen unless your playing music which is only for music volume,
thanks for the 2 finger pull down, i didnt know it toggles the shortcuts pane.
Like you see in my screenshots attached, the volume bar will not dissapear after I changed the volume, I need to tap somewhere on the screen and just after this the bar dissapears.
If I watch a YT Video and just want to change the volume I need to tap on the screen afterwards. It is just in my case or a Moto X Style (Pure) problem?
I asked some guys who run stock 6.0 on a Nexus device and they so not see this behaviour, thier volume bar dissapears on its own after the change is made.
It works fine for me, slider disappears really quick.
Upgraded to 6.0 yesterday.
dudaka said:
It works fine for me, slider disappears really quick.
Upgraded to 6.0 yesterday.
Click to expand...
Click to collapse
Pure or Style? I have a EU Style
Style EU.
24.11.18.clark_reteu.reteu.en.EU
Same here,
I thought it was MM feature for some reason
dudaka said:
Style EU.
24.11.18.clark_reteu.reteu.en.EU
Click to expand...
Click to collapse
Vitagore said:
Same here,
I thought it was MM feature for some reason
Click to expand...
Click to collapse
Yep, same version here, strange that it works in some cases and in others it just don't work..
maybe I should do a factory reset
Same here (Moto x pure).
I also thought that this is MM feature
kabauterman said:
Yep, same version here, strange that it works in some cases and in others it just don't work..
maybe I should do a factory reset
Click to expand...
Click to collapse
I did a factory reset some time ago, had other issues, bud it didn't go away.
I should say I'm runnign TruPure 2.2 with xposed+ gravitybox and some other modules.
Are you guys running stock MM?
Vitagore said:
I should say I'm runnign TruPure 2.2 with xposed+ gravitybox and some other modules.
Click to expand...
Click to collapse
Same here.
TruPureX 2.2 with Xposed , GravityBox and some more
Mine goes away but it takes forever, like 30 seconds. Figured it was a feature too since previous versions it was actually too quick.
Tried disabling xposed modules?
Sent from my Moto XPE
So I disabled gravitybox, restarted the phone and the volume bar was still there for over 10 sec.
So it's not GB that causing the issue.
Just checked,
It does disappear after 20 seconds
kabauterman said:
Like you see in my screenshots attached, the volume bar will not dissapear after I changed the volume, I need to tap somewhere on the screen and just after this the bar dissapears.
If I watch a YT Video and just want to change the volume I need to tap on the screen afterwards. It is just in my case or a Moto X Style (Pure) problem?
I asked some guys who run stock 6.0 on a Nexus device and they so not see this behaviour, thier volume bar dissapears on its own after the change is made.
Click to expand...
Click to collapse
Sometimes it doesn't disappear itself. It disappears touching somewhere on the screen. I am okay to live with it. However it is not happening very often. It doesn't stay on the screen persistently.
I did a factory reset now, and it is stil the same way, I have a stock MXS.
I do not think it is a feature because on Nexus Phones it just works fine, and who the hell needs this bar longer then 2-3 sec, or is somebody changing volume this way?
€: since when do a wipe data delete the internal storage? -.-
smohanv said:
Sometimes it doesn't disappear itself. It disappears touching somewhere on the screen. I am okay to live with it. However it is not happening very often. It doesn't stay on the screen persistently.
Click to expand...
Click to collapse
IF YOU TOUCH THE SCREEN yes, so otherwise it is there for a way to long time.
This seems to be a bug because I have never seen any other phone behave like this and even on stock Marshmallow it doesn't work this way.
The volume panel time out is set to 30 seconds if you have moto voice enable in Accessibility Settings.
arcardinal said:
The volume panel time out is set to 30 seconds if you have moto voice enable in Accessibility Settings.
Click to expand...
Click to collapse
You are right!
But what does it do? I deactivated it and I'm still able to use my wake up phrase and do all the stuff
Alright,
For the people who use the gravitybox.
Go to accessibility, disable moto voice.
Go to gravitybox, media tweaks, volume panel timeout and set your time.
It works for me, I hope it works for you guys as well.
Been using the LED View Cover for a few months with no issues. But after the Android 10 update, the media buttons no longer work.
At first I thought that the cable might be broken and the entire display was no longer touch sensitive, but then the alarm and timer silencers work. Only the media buttons for next track, pause etc.
Anyone else having this issue?
legrunt said:
Been using the LED View Cover for a few months with no issues. But after the Android 10 update, the media buttons no longer work.
At first I thought that the cable might be broken and the entire display was no longer touch sensitive, but then the alarm and timer silencers work. Only the media buttons for next track, pause etc.
Anyone else having this issue?
Click to expand...
Click to collapse
My skip track and play/pause are working as usual on my led view case mate, on 9 or 10.
Hi I am having this issues, the buttons stopped working after android update, then the led icon editor updated and removed the buttons....
Mikecoffeereturns said:
Hi I am having this issues, the buttons stopped working after android update, then the led icon editor updated and removed the buttons....
Click to expand...
Click to collapse
With the cover closed, press the lock button to hide the equalizer bars, then press it again and the pause/skip buttons show up.
Mikecoffeereturns said:
Hi I am having this issues, the buttons stopped working after android update, then the led icon editor updated and removed the buttons....
Click to expand...
Click to collapse
Based on your reply, i went into the led icon editor, which prompted an led cover software update. After the update, everything works again. Thanks!
Beetle84 said:
With the cover closed, press the lock button to hide the equalizer bars, then press it again and the pause/skip buttons show up.
Click to expand...
Click to collapse
Thanks that worked... Cheers