[Q] I hard bricked my Nexus 4...()Q*"/)(*"/ - Nexus 4 Q&A, Help & Troubleshooting

And I know the exact reason why. I was doing a backup with TWRP and I activated the compression. Eventually, the phone stopped, the LED turned red and since then I'm unable to either boot the phone, go in bootloader or anything, HOWEVER, I was able to have the download mode show up (with power-volup/voldown) however, I don't know of any tool that would allow me to do anything in download mode.
So... why are my options? I bought the N4 when it became available in the US/Canada back in November 14th.
EDIT: I have to add that the phone was really hot to touch, so I guess it crashed due to the temperature. I kind of think adding compression didn't help.

Well, I'm on the phone with em and I guess I gonna get a replacement... For everybody tempted to select compression, please don't do it.

Hmm, I ran a compressed backup in TWRP the other day, guess I was lucky not to brick it
Did notice the battery running down pretty fast during the backup (2% per minute or so), won't be compressing it on future backups!

Leave it plugged in & undisturbed during the night, try to boot up the next day. You should theoretically be able to boot again.

If you can put the phone in download mode how is it a hard brick?
Leave the phone on the charger overnight then try it.
Or you can try and unscrew the back and reset the battery.
Or you can go without a phone while they send you an RMA.

joshnichols189 said:
If you can put the phone in download mode how is it a hard brick?
Leave the phone on the charger overnight then try it.
Or you can try and unscrew the back and reset the battery.
Or you can go without a phone while they send you an RMA.
Click to expand...
Click to collapse
was your phone plugged in when trying to reboot ? if so unplug then try holding vol up and down and power to boot into fastboot

KeemGoodFella said:
was your phone plugged in when trying to reboot ? if so unplug then try holding vol up and down and power to boot into fastboot
Click to expand...
Click to collapse
Fastboot is vol dn + power. And being plugged in does not prevent fastboot mode as long as you give it a second to start charging after powering down.

Vangelis13 said:
Leave it plugged in & undisturbed during the night, try to boot up the next day. You should theoretically be able to boot again.
Click to expand...
Click to collapse
For kicks, I tried this morning and still didn't boot. So, I guess I just fried the mainboard/CPU.
One thing to note, my phone was encrypted too. I guess the need to decrypt/encrypt the backup while compressing killed it with hotness

KeemGoodFella said:
was your phone plugged in when trying to reboot ? if so unplug then try holding vol up and down and power to boot into fastboot
Click to expand...
Click to collapse
I did all that. Google had me do for 60s the voldown+power. Only when plugged in, I could make it, once in a while get it in download mode. And I could see the Google logo when trying to get into fastboot and it crashed with the LED flashing red. It is dead, Jim.

Related

Hard bricked lg g2!!

Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
deetea48601 said:
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
Click to expand...
Click to collapse
hold power down for 20 seconds. let phone sit for 1 minute. now hold power and volume down. this should bring you to a white reset screen. press power 3 times.
gentlemandroid17 said:
hold power down for 20 seconds. let phone sit for 1 minute. now hold power and volume down. this should bring you to a white reset screen. press power 3 times.
Click to expand...
Click to collapse
i tried that and nothing happened.
When you plug in USB does charge light come on. Sounds like a battery went dead.
Sent from my LG-D802 using Tapatalk
I've heard some people are having issues with the charge port and/or cord also. Maybe try another cord and make sure it's plugging in tightly? I think the last person covered everything else.
gentlemandroid17 said:
When you plug in USB does charge light come on. Sounds like a battery went dead.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
No charge light at all =/
I had the same problem, it occured while switching from cwm to twrp. i used the unbuntu method ( i think you mean this right here: http://forum.xda-developers.com/showthread.php?t=2582142)
are you sure you were in fastboot mode? because i wasnt and it should say so in the top left corner if you were.
try different cords/ usb ports or even pc's to charge it. my mac couldn't find it at all, my windows did.
UnknownCloakedMan said:
I've heard some people are having issues with the charge port and/or cord also. Maybe try another cord and make sure it's plugging in tightly? I think the last person covered everything else.
Click to expand...
Click to collapse
Cord charge my tab just fine, therefore im assuming the cord is fine... i think
i have the same problem
deetea48601 said:
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
Click to expand...
Click to collapse
I have the same problem my phone is completly dead i don't know what else can i do, the linux tutorial doesn't work because the pc don't detects the phone
did tou guys check if the twrp image you downloaded was correct size? Wonder if a bad download could cause this.
bachera said:
did tou guys check if the twrp image you downloaded was correct size? Wonder if a bad download could cause this.
Click to expand...
Click to collapse
For me the brick happened when i was flashing KK with TWRP, during the flashing appears something that said "couldn't not mount system" and the phone shut down and never power up again , no usb no charge, no linux, no nothing, when i plug my device in windows appears that the devices cannot install the drivers, and i've tried all the drivers and still doesn't work
Hold power down until phone is completely off. Then, hold power and down volume until you see LG logo. As soon as you see the LG logo, release and then quickly press power and down again. Hold until you see a white screen. Then go from there.
techbeck said:
Hold power down until phone is completely off. Then, hold power and down volume until you see LG logo. As soon as you see the LG logo, release and then quickly press power and down again. Hold until you see a white screen. Then go from there.
Click to expand...
Click to collapse
i've tried all the possible combinations of buttons and no one works, i've been holding the power button for a whole minute and nothing happened, and the other combination either, nothing seems to work i give up
It's just power you press after the logo, not power and volume down.
pimfram said:
It's just power you press after the logo, not power and volume down.
Click to expand...
Click to collapse
There's no logo, 'cause it doesn't turn on by any means , no matter what button or combination i press, there's no response.
Thanks
Have you tried getting into download mode?
pimfram said:
Have you tried getting into download mode?
Click to expand...
Click to collapse
i've tried everything, download mode, linux, recovery, lg mobile, and nothing works i think it's completly brick, i hope one day someone comes with the solution, because i went today to SAT and they don't even know what happened with my phone, and i bought it in another country so they don't want to get involve
So all you get is a black screen with you boot? There's probably a way to push whatever file might be missing or even an entire ROM but I lack the knowledge on how to do that. I remember I had to work some magic on my Galaxy Nexus but I used a toolkit so I'm afraid I've got no really useful information for you.
This also happened to me!
I am in the same state.
I rooted the LG, I installed the custom Rom, I installed an updated GAPPS and it wasnt working. I then went and installed another GAPPS overtop and I got stuck in boot loop. After I tried recovery from ADB I tried to restore from TRWP and it didnt take. After I rebooted nothing turned on, no LED, I tried ALL button combinations and nothing comes on at all. I am wondering if the phone died and now will not charge...I started with 60% but the last time i saw it it was down to 15% just thinking maybe it died completely and without any software to boot it wont charge...I have had it on charge for 8 hrs since and still nothing...
Please help!
Bobert the great said:
I am in the same state.
I rooted the LG, I installed the custom Rom, I installed an updated GAPPS and it wasnt working. I then went and installed another GAPPS overtop and I got stuck in boot loop. After I tried recovery from ADB I tried to restore from TRWP and it didnt take. After I rebooted nothing turned on, no LED, I tried ALL button combinations and nothing comes on at all. I am wondering if the phone died and now will not charge...I started with 60% but the last time i saw it it was down to 15% just thinking maybe it died completely and without any software to boot it wont charge...I have had it on charge for 8 hrs since and still nothing...
Please help!
Click to expand...
Click to collapse
I'm afraid to tell you, but our phones die there's nothing to do to saved them, we just have to keep them in that state meanwhile the solution comes up, because in this very moment there's nothing we can do

Phone boots to blue screen

My G2 suddenly just stopped working yesterday. When I try to power it on the phone either freezes shortly after the boot screen, gets to the homescreen then shuts off, or boots to an all blue screen. I can access TWRP but haven't been able to fix it with anything I've found. My pc isn't recognizing the phone so don't know if I can flash another rom. Also tried factory reset with no luck. Any help please this is driving me crazy!!!
The same thing just happened to me! Someone please help us! IS there a solution to this?
dsljk2009 said:
My G2 suddenly just stopped working yesterday. When I try to power it on the phone either freezes shortly after the boot screen, gets to the homescreen then shuts off, or boots to an all blue screen. I can access TWRP but haven't been able to fix it with anything I've found. My pc isn't recognizing the phone so don't know if I can flash another rom. Also tried factory reset with no luck. Any help please this is driving me crazy!!!
Click to expand...
Click to collapse
colbyrainey said:
The same thing just happened to me! Someone please help us! IS there a solution to this?
Click to expand...
Click to collapse
Ok, since there is little to no information out there I thought I would share how I created and fixed this problem.
I received a new phone under warranty because of a failing sim card reader. Naturally, the first thing I did once I received it was root it. Next, I thought I would be slick and use flashify to flash a custom recovery (TWRP). Little did I know, with the new version of Android, our phones have a locked bootloader. I freaked out when I saw some weird error messages about it and tried to power off the device in the middle of it booting. BIG MISTAKE. In hindsight, I am assuming that it was re-flashing the factory recovery when I powered it off.
It gave me a solid blue screen for two hours, unless I held the power button for 10 seconds, which would just repeat the process from black screen to solid blue screen repeatedly. I tried to reboot into recovery for 2 hours by holding volume down and power. 2 HOURS!
At that point, I realized that I may have some luck getting it into download mode by powering it off, then powering it on with volume up and power and plugging in a USB cable. VOILA! It booted up normally (somehow) and I got it running the OS.
After that, I made sure that I did a factory reset by reverting to stock using the LG Software Upgrade tool.
The moral of this story is, if you are going to try to install a custom recovery on 4.4.2, make sure you know what you're doing. It turns out an app called AutoRec did the trick for me.
dsljk2009 - I hope this message helps you, or anyone else who may think they've bricked their phones.
CHEERS LADS!
If this post helped you be sure to hit thanks!
colbyrainey said:
Ok, since there is little to no information out there I thought I would share how I created and fixed this problem.
I received a new phone under warranty because of a failing sim card reader. Naturally, the first thing I did once I received it was root it. Next, I thought I would be slick and use flashify to flash a custom recovery (TWRP). Little did I know, with the new version of Android, our phones have a locked bootloader. I freaked out when I saw some weird error messages about it and tried to power off the device in the middle of it booting. BIG MISTAKE. In hindsight, I am assuming that it was re-flashing the factory recovery when I powered it off.
It gave me a solid blue screen for two hours, unless I held the power button for 10 seconds, which would just repeat the process from black screen to solid blue screen repeatedly. I tried to reboot into recovery for 2 hours by holding volume down and power. 2 HOURS!
At that point, I realized that I may have some luck getting it into download mode by powering it off, then powering it on with volume up and power and plugging in a USB cable. VOILA! It booted up normally (somehow) and I got it running the OS.
After that, I made sure that I did a factory reset by reverting to stock using the LG Software Upgrade tool.
The moral of this story is, if you are going to try to install a custom recovery on 4.4.2, make sure you know what you're doing. It turns out an app called AutoRec did the trick for me.
dsljk2009 - I hope this message helps you, or anyone else who may think they've bricked their phones.
CHEERS LADS!
If this post helped you be sure to hit thanks!
Click to expand...
Click to collapse
Hey,
How did you power off your G2 before putting it into download mode? Im experiencing the same problem.
Please assist me.
jocyrus said:
Hey,
How did you power off your G2 before putting it into download mode? Im experiencing the same problem.
Please assist me.
Click to expand...
Click to collapse
I didn't get the blue screen but I kept getting the security error screen on my d802. To turn it off, I kept holding down the power button for about 10 seconds after the screen went blank. This caused the phone to remain powered off. After that, I was able to boot into download mode. Maybe this method will work for your phone.
audit13 said:
I didn't get the blue screen but I kept getting the security error screen on my d802. To turn it off, I kept holding down the power button for about 10 seconds after the screen went blank. This caused the phone to remain powered off. After that, I was able to boot into download mode. Maybe this method will work for your phone.
Click to expand...
Click to collapse
It didn't work. Any other suggestions? :|
jocyrus said:
It didn't work. Any other suggestions? :|
Click to expand...
Click to collapse
Don't know of any other methods because holding down the power button got the phone to turn off and allow me to get into download mode. From download mode, I was able to restore a stock 5.01 ROM to my phone via LG Mobile Support Tools.
LG G2 Bluescreen then no boot after disconnecting battery
Found my LG G2 with a completely blue screen. It would not turn off. Took it apart and disconnected the battery. Reconnected the battery and there was only a blank black screen and the phone would not boot. Zilch. Even with pressing the power button with the volume down to boot into recovery.....still zilch.
I sucessfully got my phone to work again using a hair dryer trick on an LG G3, which I found here.
1. I took the back off the phone, disconnected the battery, and removed the SIM card.
2. I then used a hairdryer on high heat and blew the heat over the uncovered areas for 10 minutes.
3. I let the phone from hot to warm, reconnected the battery and put it all back together with the SIM card replaced.
4. I booted into recovery and restored a TWRP backup, and my LG G2 is working like a champ again.

[Solved] Cannot use battery power on recovery and system

So, here's my situation, my phone suddenly turned off last night while installing a game, when i tried to power it up, it "blinking" on the boot logo, it keeps turned on and off, so i reckon its battery has run out, so i charge it, then it works, it can boot to system, after it shows around 80% i unplugged the charger but the phone then suddenly turned off and again, blinking on the boot logo.. so i charge it again just to see it boot to system and shows 80% battery.. i tried to charge it to 100%, but at 100%, the phone suddenly died, again..
at first i thought it might be a battery problem, or power circuit thingy, but here's the catch, it can hold for 30 mins + on bootloader mode..
can someone tell me what is wrong with my phone?
EDIT: flashed stock ROM and Recovery, still no use
EDIT2: Did the QPST as suggested as Rwepradeep, still blinking on lenovo logo
EDIT3: Solved! Battery was the actual problem
chlova said:
So, here's my situation, my phone suddenly turned off last night while installing a game, when i tried to power it up, it "blinking" on the boot logo, it keeps turned on and off, so i reckon its battery has run out, so i charge it, then it works, it can boot to system, after it shows around 80% i unplugged the charger but the phone then suddenly turned off and again, blinking on the boot logo.. so i charge it again just to see it boot to system and shows 80% battery.. i tried to charge it to 100%, but at 100%, the phone suddenly died, again..
at first i thought it might be a battery problem, or power circuit thingy, but here's the catch, it can hold for 30 mins + on bootloader mode..
can someone tell me what is wrong with my phone?
Click to expand...
Click to collapse
Flash Stock ROM or any Other ROM and report back
Rub My Donger :'v said:
Flash Stock ROM or any Other ROM and report back
Click to expand...
Click to collapse
downloading the stock ROM atm, will report once it's done
Rub My Donger :'v said:
Flash Stock ROM or any Other ROM and report back
Click to expand...
Click to collapse
flashed Stock ROM, still happening
chlova said:
flashed Stock ROM, still happening
Click to expand...
Click to collapse
in what way u are flashing the stock rom??
try flashing with QPST if u had pc..
then ur phone will start like a factory product..
if u have pc search in YouTube for qpst method..
that method can solve
Rwepradeep said:
in what way u are flashing the stock rom??
try flashing with QPST if u had pc..
then ur phone will start like a factory product..
if u have pc search in YouTube for qpst method..
that method can solve
Click to expand...
Click to collapse
okay so i did the qpst thing, it can hold on at download mode until it finished, then after that the phone reboots, and it happened again...
i don't get this phone, it works well on bootloader and download mode, but not so long at recovery.. not to mention i can't even boot into system (can't even past the boot logo lol)
Okay so, i took it to Lenovo Service Center, they told me something wrong with the battery, apparently it hold up on bootloader because the bootloader mode didn't took so much power, so even a broken battery should hold up a little.. Changed the battery, now it works well, thanks for all the help..

Huawei P10 Lite - Bricked

Hello guys,
A day ago I decided to root my Huawei P10 lite. I unlocked bootloader and flashed TWRP. Everything worked fine. However I was unable to root my phone so I tried to lock bootloader. Thats where my problem started.... I locked bootloader via ADB and then it said the phone will reboot and factory reset. Phone was rebooted but now its ,,stucked" on huawei logo screen and nothing happens.... I just let phone to discharge and when I try to turn it on its still get to the logo screen and nothing. Always when I try to turn phone off it keeps turning on to the logo screen and Im unable to go to recovery or safe mode because button combination dont work. I cant even connect it to the PC via the USB cable....
Any ideas how to fix it (if its even possible) would be much apreciated.
Thanks a lot guys.
So, even you if you mounted the /system partition read-write it gets modified and the signature breaks that's why your phone no longer boots.
Try following: shutdown the phone if you can, press volume down and at the same time plug in the USB cable and unlock the bootloader, then flash the latest firmware for the device using the HwOTA method:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Eurofighter_ty said:
So, even you if you mounted the /system partition read-write it gets modified and the signature breaks that's why your phone no longer boots.
Try following: shutdown the phone if you can, press volume down and at the same time plug in the USB cable and unlock the bootloader, then flash the latest firmware for the device using the HwOTA method:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
Thats the problem, the phone cant be shut downed by the ,,official" way (hold power button) because it instatly power on after two seconds... Only way how to completely shut down is let the phone discharge.... Anyway when I try to shut down the phone and then instatly press volume down I always get to the logo screen then I get black screen (looks like its trying to do something) and then the phone reboots and again get logo screen... It looks like the phone is gone for good lol
Eurofighter_ty said:
So, even you if you mounted the /system partition read-write it gets modified and the signature breaks that's why your phone no longer boots.
Try following: shutdown the phone if you can, press volume down and at the same time plug in the USB cable and unlock the bootloader, then flash the latest firmware for the device using the HwOTA method:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
Thats the problem, the phone cant be shut downed by the ,,official" way (hold power button) because it instatly power on after two seconds... Only way how to completely shut down is let the phone discharge.... Anyway when I try to shut down the phone and then instatly press volume down I always get to the logo screen then I get black screen (looks like its trying to do something) and then the phone reboots and again get logo screen... It looks like the phone is gone for good lol
EDIT
It worked as you said (holding volume down + USB) and phone booted successfully but then appeared shutting down possibly due to low battery... I will keep trying. So thank you very much, you saved my day lol.
Allright, the phone is gone for good... Whenever I try your trick (volume down + USB) the phone boot up to the OS but then always shut down because of low battery. I tried to charge the battery but it seems like its not charging at all... Got phone on charger for three hours now and still red LED diod shows low battery.... I think this thread can be closed and I will bring the phone to the service center and see if they can fix this or not. Again thanks for the help.
Try to charge it when is in bootloop or that's what you tried?
Eurofighter_ty said:
Try to charge it when is in bootloop or that's what you tried?
Click to expand...
Click to collapse
Yeah, now I have it on charger for 5 hours, got huawei logo on screen and red LED diod flashing... Strange thing is the phone is not heating anymore, even charger is cold... When I un-plug the charger the phone shut down in like 5 minutes... When its on charger its not turnning off so I assuming there must be some power coming through the charger to phone then...
This Huawei P10 Lite is quite strange piece of electronic.... Its just booted itself on its own and actually its working just fine... What would you recommend to do, now? battery is charging right now at 16%
pathfindercz said:
This Huawei P10 Lite is quite strange piece of electronic.... Its just booted itself on its own and actually its working just fine... What would you recommend to do, now? battery is charging right now at 16%
Click to expand...
Click to collapse
What do you mean by working just fine ? It booted to the OS or what ?
Eurofighter_ty said:
What do you mean by working just fine ? It booted to the OS or what ?
Click to expand...
Click to collapse
I left it plugged on charger and after few hours it booted to the OS, but when I tried to go to Fastboot and Rescue mode it turned off and now It wont boot again. Got stucked on huawei logo screen again.

Help, My LG G2 is a mess!

HI
So i was trying to restore my LG G2 D803 phone and I accidentally unplugged it when I was doing the LG Tools process, I turned off my phone so I can reset it but now it doesn't work anymore. So now my phone can't use Firmware Update, and every time I tried to escape it, by hold the power button or anything, it goes back to Firmware Update where its now at 0%. What do I do now?
EDIT: I think the problem i'm facing right now. Is that it keeps going into a glitch download mode when I turn my phone on, and I can't access download mode properly or factory reset, due to going back to the glitched download mode. I tried to flash it properly, letting it drain battery on itself, and turning it off FULLY & turning it back on, where all these methods would just lead back to the glitched download mode.
JustinY050 said:
HI
So i was trying to restore my LG G2 D803 phone and I accidentally unplugged it when I was doing the LG Tools process, I turned off my phone so I can reset it but now it doesn't work anymore. So now my phone can't use Firmware Update, and every time I tried to escape it, by hold the power button or anything, it goes back to Firmware Update where its now at 0%. What do I do now?
Click to expand...
Click to collapse
You can try flashing a kdz for your model in download mode with lg 2014 flash tool. See links below, there might be YouTube tutorials, not sure.
https://lg-firmwares.com/lg-d803-firmwares/
https://forum.xda-developers.com/showthread.php?t=2797190
crophs said:
You can try flashing a kdz for your model in download mode with lg 2014 flash tool. See links below, there might be YouTube tutorials, not sure.
https://lg-firmwares.com/lg-d803-firmwares/
https://forum.xda-developers.com/showthread.php?t=2797190
Click to expand...
Click to collapse
Yea I tried using the Flash tool Way but it doesn't work, I think the problem is that the LG is stuck in download mode so I can't do any Flash tool stuff or anything, and I can't restart my phone because it would just go back.
JustinY050 said:
Yea I tried using the Flash tool Way but it doesn't work, I think the problem is that the LG is stuck in download mode so I can't do any Flash tool stuff or anything, and I can't restart my phone because it would just go back.
Click to expand...
Click to collapse
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
crophs said:
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
Click to expand...
Click to collapse
It didn't show any progress on the phone, and also said an error on not working. And there would be no change in the download screen, like it would say that nothing is downloading from the USB port it is in and etc.
But I try to wait for 25 mins and see.
crophs said:
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
Click to expand...
Click to collapse
Nope it didn't work. I did it for at least 30 mins and nothing happened, still the same screen on both on my phone and computer.
Can you post a video ?
crophs said:
Can you post a video ?
Click to expand...
Click to collapse
Of the 25 mins or my problem?
I cant do it for now, but I think the problem is that my phone is in a loop of download mode, i mean that everytime I turn off my phone and turn it back on, it goes back to download mode without me pressing the buttons.
JustinY050 said:
Of the 25 mins or my problem?
I cant do it for now, but I think the problem is that my phone is in a loop of download mode, i mean that everytime I turn off my phone and turn it back on, it goes back to download mode without me pressing the buttons.
Click to expand...
Click to collapse
You must turn it off completely before booting in download mode. Keep pressing and holding volume down+power for a minute, it should completely turn off after one or two LG logo. If it doesn't then you can unplug battery. After that you don't boot with power button, then you boot with download mode method.
Video from complete shutdown - putting USB in computer while pressing volume up button and starting download mode - software recognizing your device - checking all the correct options in software - hitting flash button - state of phone after flash started.
crophs said:
You must turn it off completely before booting in download mode. Keep pressing and holding volume down+power for a minute, it should completely turn off after one or two LG logo. If it doesn't then you can unplug battery. After that you don't boot with power button, then you boot with download mode method.
Video from complete shutdown - putting USB in computer while pressing volume up button and starting download mode - software recognizing your device - checking all the correct options in software - hitting flash button - state of phone after flash started.
Click to expand...
Click to collapse
No, like it automatically goes to download mode wihtout me pressing the buttons, and if i do it the normal button pressing way with the power and volume up, then idk if its the glitch version. But the problem im trying to solve is fixing it so it stops going automatically to the glitched download mode when i turn it on
JustinY050 said:
No, like it automatically goes to download mode wihtout me pressing the buttons, and if i do it the normal button pressing way with the power and volume up, then idk if its the glitch version. But the problem im trying to solve is fixing it so it stops going automatically to the glitched download mode when i turn it on
Click to expand...
Click to collapse
unlpug battery, see youtube how to put it in download properly and flash
crophs said:
unlpug battery, see youtube how to put it in download properly and flash
Click to expand...
Click to collapse
Like take the battery out?
JustinY050 said:
Like take the battery out?
Click to expand...
Click to collapse
Whatever that means to you. Not sure how old you're, but try not to be a thick skull with someone trying help you for free, bye
crophs said:
Whatever that means to you. Not sure how old you're, but try not to be a thick skull with someone trying help you for free, bye
Click to expand...
Click to collapse
K firstly, Im not trying to be rude or anything, I just need help fixing my phone. If I somehow offended you in any reason why, im sorry. And I literally don't know much about phones, but I was trying to make sense on your instructions and making sure Im not going to mess it up. If you dont want to help anymore, its fine, im grateful that you tried to help
Also I know how to flash it properly and put it in download mode properly, its just that its always going to a glitched download mode so I can't download anything, or put it in factory mode.
JustinY050 said:
K firstly, Im not trying to be rude or anything, I just need help fixing my phone. If I somehow offended you in any reason why, im sorry. And I literally don't know much about phones, but I was trying to make sense on your instructions and making sure Im not going to mess it up. If you dont want to help anymore, its fine, im grateful that you tried to help
Also I know how to flash it properly and put it in download mode properly, its just that its always going to a glitched download mode so I can't download anything, or put it in factory mode.
Click to expand...
Click to collapse
No you shouldn't, rather I am sorry, made a bad judgement call. I left room for confusion in my post. Should've said unplug and plug back the battery. Perhaps you thought if i meant to leave it unplugged.
As your main problem was to stop it from bootlooping into a glitched download, it can be done with holding power and volume down for a minute or two.
But since that didn't work for you i suspected button/hardware failure and so recommended to reconnect the battery.
Another way can be, to let it be as is, so that the battery drains itself and after that charging it with a wall adapter. And see if it stops booting into download itself, or displays a charging only screen.
Anyhow, I hope you find a way out. Feel free to ask anything again.
crophs said:
No you shouldn't, rather I am sorry, made a bad judgement call. I left room for confusion in my post. Should've said unplug and plug back the battery. Perhaps you thought if i meant to leave it unplugged.
As your main problem was to stop it from bootlooping into a glitched download, it can be done with holding power and volume down for a minute or two.
But since that didn't work for you i suspected button/hardware failure and so recommended to reconnect the battery.
Another way can be, to let it be as is, so that the battery drains itself and after that charging it with a wall adapter. And see if it stops booting into download itself, or displays a charging only screen.
Anyhow, I hope you find a way out. Feel free to ask anything again.
Click to expand...
Click to collapse
Nah its ok, that happens to me too sometimes.
So I was going to try to unplug my battery and reconnect it but then but before I was, i was testing some other stuff with the button commands stuff (I mean like the download mode with pressing power and volume up adn stuff) and I think i was able to get the actualy download mode, not the glitched one. I was able to download a bit for the flash tool so what i'm testing rn is to see if I can do the full factory reset and see if that fixes it.
PS: I was already doing the flashtool before so its fine if I erase my data
JustinY050 said:
Nah its ok, that happens to me too sometimes.
So I was going to try to unplug my battery and reconnect it but then but before I was, i was testing some other stuff with the button commands stuff (I mean like the download mode with pressing power and volume up adn stuff) and I think i was able to get the actualy download mode, not the glitched one. I was able to download a bit for the flash tool so what i'm testing rn is to see if I can do the full factory reset and see if that fixes it.
PS: I was already doing the flashtool before so its fine if I erase my data
Click to expand...
Click to collapse
K it looks like it worked but now it crashes when it loads the LG logo
JustinY050 said:
K it looks like it worked but now it crashes when it loads the LG logo
Click to expand...
Click to collapse
Sounds like a bootloop, i once fixed it by using another usb port and usb cable. Sometimes they get disconnected for bad connection and cause this kinda error. If MD5 is available, please match yours with original after downloading files. You can keep flashing, maybe try a different kdz later. There is also a TOT method which i never tried myself. This phone is almost impossible to brick permanently.
Some good threads -
https://forum.xda-developers.com/showthread.php?t=2475045
https://forum.xda-developers.com/showthread.php?t=2687768
This is the easiest
https://m.youtube.com/watch?v=cOxlaIPW2ew
https://www.google.com/amp/s/amp.re...he_lg_g2_is_unbrickable_a_story_of_death_and/
crophs said:
Sounds like a bootloop, i once fixed it by using another usb port and usb cable. Sometimes they get disconnected for bad connection and cause this kinda error. If MD5 is available, please match yours with original after downloading files. You can keep flashing, maybe try a different kdz later. There is also a TOT method which i never tried myself. This phone is almost impossible to brick permanently.
Some good threads -
https://forum.xda-developers.com/showthread.php?t=2475045
https://forum.xda-developers.com/showthread.php?t=2687768
This is the easiest
https://m.youtube.com/watch?v=cOxlaIPW2ew
https://www.google.com/amp/s/amp.re...he_lg_g2_is_unbrickable_a_story_of_death_and/
Click to expand...
Click to collapse
Sorry for the late reply, just been busy flashing my phone. So I been trying to re flashing my phone using the TOT method because the kda method isn't working, but either 1) it keeps crashing when its downloading 2) cannot recognize the phone to my computer when my phone is in download mode but says its not connected to my computer. Before, it did kinda work, it kept crashing but it lasted a bit longer sometimes, but I had to reflash it because the software update was glitched where it says its on the notification bar but wasnt there. So for rn, i'm still trying to reflash it.
I donno much about the TOT method, haven't tried myself. Getting a hunch that there might be hardware issues somewhere which is interrupting the process and not letting it finish, could be the cable, pc usb outlet, phone's micro usb port....perhaps a loose connection or something else.
If i were you i would stick to the kdz, as it's working somewhat better for you and they all serve same purpose in the end. That youtube video is actually a good step by step tutorial.

Categories

Resources