[Q] Can't access CWM - Can't boot - Acer Iconia A500

Hey guys,
I am really going crazy with my A500 and I really need help!
I tried to Update my Taboonay to the newest Flexreaper Edition. In the desciption it said that I need to have one of that custom recoverys to use Aroma installer. Because I had CWM with Thor 1.3.4 and 1.7.3 is neccessary I wanted to Update CWM via installing the zip from SD Card. Before installing the zip I accedientially deleted the update.zip from the SD Card. Tried to restart CWM than but it didn't work out and I could not enter CWM. I was stuck on booting recovery kernel image, waited about a minute and than the screen turned dark. Since that point the tablet doesn't start anymore and the tablet does not enter CWM.. What can I do to fix it?
I summarize:
- can't enter CWM
- cant boot the ROM
- deleted update.zip
Thank you in advance

GamerAlive said:
Hey guys,
I am really going crazy with my A500 and I really need help!
I tried to Update my Taboonay to the newest Flexreaper Edition. In the desciption it said that I need to have one of that custom recoverys to use Aroma installer. Because I had CWM with Thor 1.3.4 and 1.7.3 is neccessary I wanted to Update CWM via installing the zip from SD Card. Before installing the zip I accedientially deleted the update.zip from the SD Card. Tried to restart CWM than but it didn't work out and I could not enter CWM. I was stuck on booting recovery kernel image, waited about a minute and than the screen turned dark. Since that point the tablet doesn't start anymore and the tablet does not enter CWM.. What can I do to fix it?
I summarize:
- can't enter CWM
- cant boot the ROM
- deleted update.zip
Thank you in advance
Click to expand...
Click to collapse
I would guess, you are still running an HC bootloader? You must update your tab to the V8 unlocked bootloader from Skrilax_cz.
MD

Related

Help - Clockworkmod Recovery

I'm trying to flash a custom rom made from romkitchen however have hit a wall. Any help pointing out a solution or where i may have gone wrong would be most appreciated. I'll outline all the steps i took, not sure if they are related to the issue or not.
I started of with froyo dtjp5 with no 3 button and 3e recovery. I started by using odin to flash the canadian bootloader fix which worked perfectly and gave me 3 button download mode. I then flashed chainfire cf-root 1.3 kernell which also worked perfectly and i know have working 2e recovery mode. I then donwloaded clockwork rom manager form the app market, and flashed the clockworkmod recover 2.5.1.2. It appeared to be successful. However when i attempt to enter recovery mode, either through the application, or through 3 button mode it, simply boots into normal 2e recovery mode rather than clockwork mod. I have tried applying the flash again but it still did not work.Untill i can boot into clockworkmod recovery i cant apply my romkitchen zip file so im kind of stuck. I must be missing something but cant figure it out, so once again any held would be much appreciated. Thanks
flash for example voodoo or speedmod kernel with odin/heimdall or kernel flasher(haven't used it often so i am not sure about kernel flasher)
Sent from my GT-I9000 using Tapatalk
Make sure CWM is set as update.zip on your sdcard - ROM Manager should actually do this for you - then in 2e recovery select flash update.zip ... the very first time it should just reboot your device (so go into recovery again), the second time it should start CWM.
Not sure why CWM is built that way.
Thanks very much
Ok so I am having a problem with cwm that i hope someone can help me with. I just flashed the latest speedmod kernel using the sgs kernel flasher app. Now when i try to reboot into recovery from cwm so that i can access the tweaks menu, the cwm options dont appear. It says i am in android sytem recovery(3e). where my only real option besides wiping the phone is to apply sdcard:update.zip, which does not work even though cwm is set as update.zip on my sd card. Any help to this noob would be appreciated.
Cap18k said:
Ok so I am having a problem with cwm that i hope someone can help me with. I just flashed the latest speedmod kernel using the sgs kernel flasher app. Now when i try to reboot into recovery from cwm so that i can access the tweaks menu, the cwm options dont appear. It says i am in android sytem recovery(3e). where my only real option besides wiping the phone is to apply sdcard:update.zip, which does not work even though cwm is set as update.zip on my sd card. Any help to this noob would be appreciated.
Click to expand...
Click to collapse
to apply CWM from 3e recovery you need it on your sd card. it has to be named 'update.zip'
the other way to do this, is download odin version, boot into download mode, and flash.
overall process takes less than 5 mins.
Check if you really have it -> settings -> about phone.
And try to flash it using odin, that worked flawlesly for me.
Sent from my GT-I9000 using Tapatalk
The kernel definately flashed correctly. I am not sure why the update.zip isnt workingfro cwm (the signature verification keeps failing), but i am going to try odin and see what happens. I've never used it before, but i am downloading it now.

[Q] Some help for a nub and ICS + Flashing ROM

Got ICS, OTA (download) installed that no problem, downloaded the acer usb drivers and used ICS Root (blackthund3r). Now i want to install LightSpeed 4.4 (i know theres a newer version) I renamed it update.zip and did the power button + V- button but it says invalid image.
Now im a bit confused cause all this android stuff is new to me, I have the acer recovery installed but im not sure what to do with it. Tried renaming it to recovery.img it says it is flashing but nothing happens.
Kinda lost at what to do or how to get this rom working.... if someone could point me in the right direction it would be sweet
Fox
foxorroxors said:
I renamed it update.zip and did the power button + V- button but it says invalid image.
Fox
Click to expand...
Click to collapse
Yep. That was pretty n00b of ya (that little trick only works on signed official roms, and even then, only ify-ify)
Check this thread. It has the tools you need.
http://forum.xda-developers.com/showthread.php?t=1622425
You can skip the part about installing an ICS rom and rooting. You already did that. You need to do steps 1, 2, (partial 4) 5 or 6 basically.
Note after you rooted. Look at step 4 and delete the required file like it says, before going to steps 5 or 6. You have an option on which package to use. Personally, I like the exe package. But your choice.
This installs patched b-loader and CWM recovery so you can flash ICS only Roms.
Easy
As you've Acer Recovery why the difficult way ? Just choose "Download / Install Roms, tick Lightspeed 4.4 in the left column, hit download and then install.
(i've version 2.74)
Fast, easy and no problems. I flashed Flexreaper 14 (now replaced by Flexreaper ICS RF1) and i can recommend it, the Rom and the way of flashing it.
urbie47 said:
As you've Acer Recovery why the difficult way ? Just choose "Download / Install Roms, tick Lightspeed 4.4 in the left column, hit download and then install.
(i've version 2.74)
Fast, easy and no problems. I flashed Flexreaper 14 (now replaced by Flexreaper ICS RF1) and i can recommend it, the Rom and the way of flashing it.
Click to expand...
Click to collapse
Acer recovery is fine if it'll install the patched Bootloader.
However, it doesn't make a user get his UID number, which is essential in case something happens in the future. Without your UID, you're basically toasted Or you're in for the long haul in figuring out how to unbrick a tab.
help
I need help for boot loader.I tried to put ICS boot loader v3, I didn't success and now I can't put another rom(I have ICS for A500 but I use A501 and it doesn't work 3G modem).How I can put other rom?
Erasing cache before SD update...
SD update cmd recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
Recovery verified failed...
ores992 said:
I need help for boot loader.I tried to put ICS boot loader v3, I didn't success and now I can't put another rom(I have ICS for A500 but I use A501 and it doesn't work 3G modem).How I can put other rom?
Erasing cache before SD update...
SD update cmd recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
Recovery verified failed...
Click to expand...
Click to collapse
You can't run that update.zip like you did. You got the error message.
Can you still boot into the 500 Rom? If so, you need to install a CWM Recovery before you can flash custom Roms. Look at the link below for instructions for CWM installation.
If you can't boot into your System, then you will need to do everything again.
You should still have your UID number when you tried to NVFlash the ver3 bootloader (I hope you wrote that number down)
You need to probably re-install the ver3 bootloader again as your attempt to install an update.zip messed things up. You just can't do it that way. So go here;
http://forum.xda-developers.com/show....php?t=1622425
Only this time, follow the instructions. You need to install CWM recovery. This is how to flash Roms, not putting update.zips on the SD card. And BTW, you should delete that update.zip from Your EXT SD Card. It will cause problems.
Also note, in those instructions, if you installed the FULL 500 ROM, you must delete a certain boot-p file before you install CWM Recovery. Or else it will delete it when you reboot the tab. Again, read the instructions.
The above steps install a 500 rom. The 500 DOES NOT have 3g like a 501. This is why you had no 3g. You have to install a 501 ICS Rom after, through CWM Recovery, and, currently, I have the only ICS Rom for the 501. And... it's a Beta release from Acer. But it works ok mostly.
Read the instructions, and understand exactly what you are doing. Also remember, with ver3 ICS Bootloader, YOU CANNOT INSTALL HC BASED ROMS without going back to an HC based bootloader. ICS Roms only. (unless you want to go back to stock).
Moscow Desire said:
You can't run that update.zip like you did. You got the error message.
Can you still boot into the 500 Rom? If so, you need to install a CWM Recovery before you can flash custom Roms. Look at the link below for instructions for CWM installation.
If you can't boot into your System, then you will need to do everything again.
You should still have your UID number when you tried to NVFlash the ver3 bootloader (I hope you wrote that number down)
You need to probably re-install the ver3 bootloader again as your attempt to install an update.zip messed things up. You just can't do it that way. So go here;
http://forum.xda-developers.com/show....php?t=1622425
Only this time, follow the instructions. You need to install CWM recovery. This is how to flash Roms, not putting update.zips on the SD card. And BTW, you should delete that update.zip from Your EXT SD Card. It will cause problems.
Also note, in those instructions, if you installed the FULL 500 ROM, you must delete a certain boot-p file before you install CWM Recovery. Or else it will delete it when you reboot the tab. Again, read the instructions.
The above steps install a 500 rom. The 500 DOES NOT have 3g like a 501. This is why you had no 3g. You have to install a 501 ICS Rom after, through CWM Recovery, and, currently, I have the only ICS Rom for the 501. And... it's a Beta release from Acer. But it works ok mostly.
Read the instructions, and understand exactly what you are doing. Also remember, with ver3 ICS Bootloader, YOU CANNOT INSTALL HC BASED ROMS without going back to an HC based bootloader. ICS Roms only. (unless you want to go back to stock).
Click to expand...
Click to collapse
Thanks, but that link is dead
ores992 said:
Thanks, but that link is dead
Click to expand...
Click to collapse
Yeah, XDA did some cleaning up overnight. Try it now;
http://forum.xda-developers.com/showthread.php?t=1622425
MD

A500 Bootloop. Tried to flash TegraOwners Rom, now no rom works

I can access my recovery, and flash roms from the SD, however no matter what ROM I tried, I get a boot loop.
I have Skrilax_CZ bootloader v8
CWM Recovery v5.5.0.x
Any suggestions or ideas?
Thank you!
Another note, I used to have a working rom in my downloads folder on the device, however from recovery, when i go to choose zip from internal storage i get "E:Can't mount /sdcard/"
Thank you!
jrichardsMav said:
Another note, I used to have a working rom in my downloads folder on the device, however from recovery, when i go to choose zip from internal storage i get "E:Can't mount /sdcard/"
Thank you!
Click to expand...
Click to collapse
Just tried to do a restore on a backup I made sometime ago.
I got "Error formating data"
Rebooted, and I get a screen saying
"Encryption Unscuccessful" with a button to reset tablet
I press that, tablet reboots to recovery, and i get an android bot with a spinning pentagram, then the bot is on its back with a red exclamation point.
Okay got it booting! Well, booting to honeycomb, everything is kind of a blur right now, but I flashed a 3.2 rom
got the enter a password screen
did the following:
http://forum.xda-developers.com/showpost.php?p=33607638&postcount=9
Now i can boot to android, but i can't boot to a recovery!!
Help?! lol
jrichardsMav said:
Okay got it booting! Well, booting to honeycomb, everything is kind of a blur right now, but I flashed a 3.2 rom
got the enter a password screen
did the following:
http://forum.xda-developers.com/showpost.php?p=33607638&postcount=9
Now i can boot to android, but i can't boot to a recovery!!
Help?! lol
Click to expand...
Click to collapse
Im actually on 3.1! and I've rooted 3.1. I'm trying to install a recovery image now, TWRP or CWM. I've tried the Goomanager method and the Acer REcovery Installer method, both force close before the recovery is installed.
jrichardsMav said:
Im actually on 3.1! and I've rooted 3.1. I'm trying to install a recovery image now, TWRP or CWM. I've tried the Goomanager method and the Acer REcovery Installer method, both force close before the recovery is installed.
Click to expand...
Click to collapse
Had to install ARI from PLAY, not MARKET.
Now flashing 4.2 + gapps. Crosses fingers.
jrichardsMav said:
Had to install ARI from PLAY, not MARKET.
Now flashing 4.2 + gapps. Crosses fingers.
Click to expand...
Click to collapse
Everything working. 4.2.1 on A500 is very nice. Multi user is beautiful.
Sorry have only just seen your posts - awesome you managed to get yourself fixed!!!!
So you had HC 3.1 with the v8 bootloader and you flashed the JB rom directly from there?? I know doing it this way has worked for me in the past its great to know someone else has luck doing it as well...
one more thing can you edit the subject line of your original post to "fixed" or "solved" - this will help others who may be in the same postion!!!
thanx and have a great 2013!!!
dibb
Sure can, if I can figure out how to edit the title.
I had 4.1, a tegraowners rom, then i had a random reboot and no matter what rom I flashed it would fail.
I tried to install a 3.1 rom, which gave me the encrypted message asking me for a password.
I then booted to fastboot, ran a few commands that I found, and got 3.1 working.
Rooted, Installed a new recovery (mine was botched) and got 4.2 working on it!
I'd like to learn more about rom development. Any good places to start?
Thanks for that...can't help re rom dev but XDA have new site"xda-university" there's a bit about rom dev there that may be helpful...good luck tho
Sent from my GT-I9300 using Tapatalk 2

[Q] What to do after a brick?

Hello everyone.
I hope you can help me.
I had an A500 bricked spontaneously (I was checking Twitter, the screen frozen, I turned off the tablet and when I turned it on again, it stucked on Acer logo) so I used the guide to recover recovery (this: http://forum.xda-developers.com/showthread.php?t=1751978, because I rooted my tablet but I didn't install recovery).
Everything was ok, I flashed the V7-Thor v1.7.3 but when I tried to install stock ROM of ICS (wipe data and cache), the tablet got "re-bricked" and only enter in APX mode.
Then I reflashed and installed V8-Thor_1.7.3_recovery and I tried to install Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT through update.zip (turned on the tablet in recovery --> Install from zip file --> Install zip file from SD card --> update.zip, then it said "Installed" and I rebooted the tablet, but it stuck on "Booting primary kernel image"...
What I'm missing or doing wrong? :/
What should I do to run ICS in my tablet again?
I'm not familiarized with the ROMs, Recoverys or flash... sorry if my question is stupid or something, but before this I never moved anything to my tablet (except for root it).
And sorry too for my bad English.
Mafvtapatio said:
Hello everyone.
I hope you can help me.
I had an A500 bricked spontaneously (I was checking Twitter, the screen frozen, I turned off the tablet and when I turned it on again, it stucked on Acer logo) so I used the guide to recover recovery (this: http://forum.xda-developers.com/showthread.php?t=1751978, because I rooted my tablet but I didn't install recovery).
Everything was ok, I flashed the V7-Thor v1.7.3 but when I tried to install stock ROM of ICS (wipe data and cache), the tablet got "re-bricked" and only enter in APX mode.
Then I reflashed and installed V8-Thor_1.7.3_recovery and I tried to install through update.zip (turned on the tablet in recovery --> Install from zip file --> Install zip file from SD card --> update.zip, then it said "Installed" and I rebooted the tablet, but it stuck on "Booting primary kernel image"...
What I'm missing or doing wrong? :/
What should I do to run ICS in my tablet again?
I'm not familiarized with the ROMs, Recoverys or flash... sorry if my question is stupid or something, but before this I never moved anything to my tablet (except for root it).
And sorry too for my bad English.
Click to expand...
Click to collapse
I think where you went wrong was choosing "install zip file from sdcard >update.zip"
Go back into recovery again > install from zip file > Choose zip from SD card (
if the file is on your micro sd card)
You should see a list of all your files and choose your rom file:
Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT.zip
Once its done, Stay in recovery and go to: Wipe Menu and do all the wipes there
Data -cache and dalvi-cache then reboot
Once you're all set up and before you reboot again, make sure there is not an "update.zip" on your sdcard - if you boot to recovery it may flash automatically and you will end up "stuck" again
good luck
dibb
dibb_nz said:
I think where you went wrong was choosing "install zip file from sdcard >update.zip"
Go back into recovery again > install from zip file > Choose zip from SD card (
if the file is on your micro sd card)
You should see a list of all your files and choose your rom file:
Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT.zip
Once its done, Stay in recovery and go to: Wipe Menu and do all the wipes there
Data -cache and dalvi-cache then reboot
Once you're all set up and before you reboot again, make sure there is not an "update.zip" on your sdcard - if you boot to recovery it may flash automatically and you will end up "stuck" again
good luck
dibb
Click to expand...
Click to collapse
Thanks! I did it and it worked, but after the reboot the tablet only shows the animated android logo... what's the problem? The ROM?
When I did the "Wipe data" it said "Formatting data" and after "Skipping erase of /data/media". I checked with the "Mount and Storage" menu in recovery and seems like my data before the brick's still in the internal storage of the tablet... is that normal?
EDIT: what version of cwm to have now? If its not 1.7.3 then go ahead and reflash the v8
Mafvtapatio said:
Thanks! I did it and it worked, but after the reboot the tablet only shows the animated android logo... what's the problem? The ROM?
When I did the "Wipe data" it said "Formatting data" and after "Skipping erase of /data/media". I checked with the "Mount and Storage" menu in recovery and seems like my data before the brick's still in the internal storage of the tablet... is that normal?
Click to expand...
Click to collapse
Yes it is - keeps your data intact but 'resets' the rom to like it is when you first flash, there is an option to wipe data/media if you wish to - theres a toggle to enable it but on every boot to recovery it will be disabled again...
You can try another flash of the rom itself otherwise reflash the v8 bootloader.
Do you have access to "fastboot mode" power vol down - just wondering
dibb
dibb_nz said:
EDIT: what version of cwm to have now? If its not 1.7.3 then go ahead and reflash the v8
Yes it is - keeps your data intact but 'resets' the rom to like it is when you first flash, there is an option to wipe data/media if you wish to - theres a toggle to enable it but on every boot to recovery it will be disabled again...
You can try another flash of the rom itself otherwise reflash the v8 bootloader.
Do you have access to "fastboot mode" power vol down - just wondering
dibb
Click to expand...
Click to collapse
I tried to reflash the same ROM, but this time nothing happened, again only says "Booting primary kernel image"... a question, if I try to flash a stock ROM (like Acer_A500_1.031.00_WW_GEN1.zip from the post of stock roms)... it will let my tablet again only in APX mode when I turn on it, right?
And I see the option "Fastboot mode" when I turn on the tablet holding Vol +.
About your question I don't know how to answer, I flashed V8-Thor_1.7.3_recovery... is that a CWM?
In the top it says CWM Recovery v5.5.0.x(thor2002ro/digetx rev 1.7.3) Iconia A50x...
Mafvtapatio said:
a question, if I try to flash a stock ROM (like Acer_A500_1.031.00_WW_GEN1.zip from the post of stock roms)... it will let my tablet again only in APX mode when I turn on it, right?
Click to expand...
Click to collapse
sorry, not sure I understand your question...are you saying you're now stuck in apx mode - black screen power light on?
There are 2 types of stock rom on here....
1) Official Acer EUU or OTA roms
2) Official Stock roms which are Custom - pre-rooted and able to flash CWM etc -
If you flash one of the Acer EUU or OTA roms you will lose CWM and Root
To be honest - with your tab "spontaneously" booting and being stuck on the acer logo and the issues that have followed - its sounding more and more like a faulty chip - this is something that only acer can fix...I could be wrong about this and I hope I am...but something is just not feeling right...
- you still have cwm and access to fastboot - thats a bonus - maybe do a complete format thru CWM of data/media, system (and flexrom if its there) then try to flash a rom again - if it still won't flash AND if you're not stuck in apx mode then I think you'd be best to download an official update.zip - from Blackthund3rs thread here this one -
Acer_AV041_1.054.00_WW_GEN1:
Once you've d/l'ed it...try opening it if you can't then it will need decrypting the instructions for this are in the OP..
Once you have extracted the "update.zip" and have it on your sdcard - flash via CWM
good luck
dibb
dibb_nz said:
EDIT: what version of cwm to have now? If its not 1.7.3 then go ahead and reflash the v8
Yes it is - keeps your data intact but 'resets' the rom to like it is when you first flash, there is an option to wipe data/media if you wish to - theres a toggle to enable it but on every boot to recovery it will be disabled again...
You can try another flash of the rom itself otherwise reflash the v8 bootloader.
Do you have access to "fastboot mode" power vol down - just wondering
dibb
Click to expand...
Click to collapse
What do you mean "If if its not 1.7.3"? Are there problems with flashing the bootloader with 1.7.3?
no, no, not at all, i meant if he didnt have that version to reflash v8 to get it
oops clicked wrong button
he said he flashed stock rom and ended up with dead android = stock recovery
A500 V8 booting primary kernel image
dibb_nz said:
no, no, not at all, i meant if he didnt have that version to reflash v8 to get it
oops clicked wrong button
he said he flashed stock rom and ended up with dead android = stock recovery
Click to expand...
Click to collapse
Hello everyone!
I have a similar issue whith my a500. but i can restore the backup i did of my honeycomb sistem in cwm (i have acess)
aftter making the backup i have flashed V8-Thor_1.7.3_recovery.a500apx in apxflashtool in order to get ics boot loader and install ICS roms.
so far so good after the flash i had already a ICS rom in my sd card redy to flash so imediatly after V8 flash entered cwm and did clean format and wipe all. Next installed the rom (aroma instalation) no problems what so ever. After instalation is finished reboted and now im stuck on skilax v8 bootloader boting primary kernel image
i tried the folowing
- chage kernel multiboot fix partitions redo clean format etc etc etc (ALL THE STEPS)
-many other ics jellybean rooms (all of the install but dont boot)
- honey comb rooms install and BOOT normaly.
at this point thought maybe it was a bad V8 flash and decided to reflash the V8-Thor_1.7.3_recovery.a500apx
Now the flash tool can get pass uploading image phase.
i have correct sbk and cpuuid since i had to recover last week from boot verified failed error and use the flash tool whith correct sbk to recover the tablet with sucess.
So basicly im stuck wit
h my honeycomb rom backup or other HC roms
any news on this subject?
cybersaicho said:
Hello everyone!
I have a similar issue whith my a500. but i can restore the backup i did of my honeycomb sistem in cwm (i have acess)
aftter making the backup i have flashed V8-Thor_1.7.3_recovery.a500apx in apxflashtool in order to get ics boot loader and install ICS roms.
so far so good after the flash i had already a ICS rom in my sd card redy to flash so imediatly after V8 flash entered cwm and did clean format and wipe all. Next installed the rom (aroma instalation) no problems what so ever. After instalation is finished reboted and now im stuck on skilax v8 bootloader boting primary kernel image
i tried the folowing
- chage kernel multiboot fix partitions redo clean format etc etc etc (ALL THE STEPS)
-many other ics jellybean rooms (all of the install but dont boot)
- honey comb rooms install and BOOT normaly.
at this point thought maybe it was a bad V8 flash and decided to reflash the V8-Thor_1.7.3_recovery.a500apx
Now the flash tool can get pass uploading image phase.
i have correct sbk and cpuuid since i had to recover last week from boot verified failed error and use the flash tool whith correct sbk to recover the tablet with sucess.
So basicly im stuck wit
h my honeycomb rom backup or other HC roms
any news on this subject?
Click to expand...
Click to collapse
Yes just one question what is - " chage kernel multiboot "???? Sounds dodgy
You can boot to fastboot mode then do an erase of data and cache, see if that helps for a start....
Do you stil have recovery and can you still restore your HC backup?
I have seen a post or two where tabs can only boot HC Roms and no ICS
It "maybe" the dreaded hardware fault - you might be best to d/l the babsector.rar and run that - it will give you a proper error if theres something wrong - can get it from the root guide in my sig. Give me a minute or two and I'll post some steps in using it
---------- Post added at 09:12 AM ---------- Previous post was at 08:53 AM ----------
How to use babsector.rar
Download and extract the babsector.rar to a folder on your PC
Turn your tab off and put it in apx mode manually. Press and hold reset button, hold power for 3 secs after the light comes on and release it, after another second release the reset button. Your screen is black and the power light is on.
Connect your tab to your PC
Navigate to the babsector folder and click on 501 A.bat, when its done
Reboot into recovery
Go to Mounts and Storage and Format System twice and Power Off
Go back into apx mode and run 501 B.bat
Reboot into recovery and do the wipes and flash your rom
Reboot

Help manually flashing stock rom/recovery

Hey all, I just did something stupid and well long story short I can't downgrade/upgrade or get stock recovery.
I'm running 3.2.1, No root or anything. Some reason I don't have the stock recovery so flashing update.zip is impossible. I was able to get the v9 bootloader on but thats it (I know its for ICS+). I've been searching and downloading non dead links trying to get this to work.
I was able to boot the device but now its locking at the lock screen. I can get into APX mode or to the main v9 bootloader options. Can anyone help or point me in the right direction to get this fixed? I have the root-3.2.1-V4 package also.
Thanks
cmenchion said:
Hey all, I just did something stupid and well long story short I can't downgrade/upgrade or get stock recovery.
I'm running 3.2.1, No root or anything. Some reason I don't have the stock recovery so flashing update.zip is impossible. I was able to get the v9 bootloader on but thats it (I know its for ICS+). I've been searching and downloading non dead links trying to get this to work.
I was able to boot the device but now its locking at the lock screen. I can get into APX mode or to the main v9 bootloader options. Can anyone help or point me in the right direction to get this fixed? I have the root-3.2.1-V4 package also.
Thanks
Click to expand...
Click to collapse
Sounds like you can do this;
1. Go to Blackthunders listing for roms. Grab a ICS Full Rom for the 500. http://forum.xda-developers.com/showthread.php?t=1816560
2. Get a CWM (latest version) http://forum.xda-developers.com/showthread.php?t=1622425 , sroll down to "manual flashing". Download the V8 multi cwm package. Unzip it to your PC.
3. With the tab booted to the V9 bootloader, connected and make sure windows recognizes it.
4. Then in that folder, open a CMD window. Type in the following (I assume the CWM image files are there)
fastboot flash recovery xxxxxxxx.img
(xxxxxxx.img is the name of the Thor CWM recovery image file)
Hit enter and it should flash. Then go back to the V9 bootloader, and select the Recovery option, and see if it boots to the cwm recovery. If it all works, then the rest is easy.
Copy the rom you downloaded to your external SD card, Boot to CWM recovery, and Install zip from external SD card. Should install (if it's a full rom) and when it re-boots, it should be a stock ICS system.
MD
Moscow Desire said:
Sounds like you can do this;
1. Go to Blackthunders listing for roms. Grab a ICS Full Rom for the 500. http://forum.xda-developers.com/showthread.php?t=1816560
2. Get a CWM (latest version) http://forum.xda-developers.com/showthread.php?t=1622425 , sroll down to "manual flashing". Download the V8 multi cwm package. Unzip it to your PC.
3. With the tab booted to the V9 bootloader, connected and make sure windows recognizes it.
4. Then in that folder, open a CMD window. Type in the following (I assume the CWM image files are there)
fastboot flash recovery xxxxxxxx.img
(xxxxxxx.img is the name of the Thor CWM recovery image file)
Hit enter and it should flash. Then go back to the V9 bootloader, and select the Recovery option, and see if it boots to the cwm recovery. If it all works, then the rest is easy.
Copy the rom you downloaded to your external SD card, Boot to CWM recovery, and Install zip from external SD card. Should install (if it's a full rom) and when it re-boots, it should be a stock ICS system.
MD
Click to expand...
Click to collapse
I actually got it back working. I used the apx tool and got the v9 loader with team win cause it's the only one I found that well actually mount the sd card. Got Thor's Rom and flashed. I was going to try to go back stock but was way easier to do it this way. I appreciate your help. Bookmarked for next time my fat fingers get ahead of my brain!
cmenchion said:
I actually got it back working. I used the apx tool and got the v9 loader with team win cause it's the only one I found that well actually mount the sd card. Got Thor's Rom and flashed. I was going to try to go back stock but was way easier to do it this way. I appreciate your help. Bookmarked for next time my fat fingers get ahead of my brain!
Click to expand...
Click to collapse
Whaaaaa ha haha! Glad you got it going!!!
MD

Categories

Resources