Everytime i try to install a rom with Recovery it freezes at "Opening update package..."
Pls help
dre4m0r said:
Everytime i try to install a rom with Recovery it freezes at "Opening update package..."
Pls help
Click to expand...
Click to collapse
The advice that I can give is to install the CM7 by schlund that along with the sense 3.5 is the best. Search discussion "CM7" and in the first few pages you'll find the best instructions that will help you step by step to understand. Good luck
http://translate.googleusercontent....455555&usg=ALkJrhieQlr4gW80bmMWOsb8zd40gxlaJg
what Recovery you installed?
Try to Install it again, or try the others
install new clock recovery i.e : 5.x.x
then try it again
Related
Hello,
I try to Unbrick my A500 with Acer_A500_0.000.00_1.122.01_EMEA_GEN5_update.zip.
At the first time it works, I can boot and I want to flash the system.ing and boot.img for Acer_A500_1.141.07_COM_GEN1 with the Acer ROM Flasher to get german language support.
The HowTo in den Android-hilfe tells my that I will get an error after reboot (right) and than I have to flash another update (can´t post link because I´m a noobie)
Now I´m stick in a bootloaderloop (android logo) and nothing will help.
I try flash the unbrick update again, but the only thing I get is the Bootloop at the android logo.
I need some serious help for this.
Thanks guys
triebstahl
Doesn't sound like your getting into recovery with the update.zip. make sure you keep holding down the vol- button until you see the little green man. Don't let go of it when you see the big "Acer".
After doing the update.zip to unbrick, run itsmagice BEFORE running Acer Rom Flasher. Then flash the boot and system images from that thread. Then reboot after the 6 minute window. It should boot normally.
Or just stick to the instructions in the other thread... I think your just not getting into recovery correctly.
PS.. Acer Rom Flasher is going to get an update when I get the chance.
triebstahl said:
Hello,
Now I´m stick in a bootloaderloop (android logo) and nothing will help.
Click to expand...
Click to collapse
Have you already tried to wipe your device?
sc2k said:
Have you already tried to wipe your device?
Click to expand...
Click to collapse
this seems to be the solution. Thanks for your [TIP]
Well now I´m chinese, but I try the Acer_A500_0.000.00_1.122.01_EMEA_GEN5_update now.
Edit: It does work. Now I try the boot.img and system.img.
i had same problem
I had the same problem with that zip. It was corrupted. Found an other source update.acer.zip and it worked, but some chinese apps came with it. List few other thing. The update.acer.zip would hot boot. The zip had folder with an other update.acer.zip in it. After extracting the zip from the zip it worked.
triebstahl said:
Hello,
I try to Unbrick my A500 with Acer_A500_0.000.00_1.122.01_EMEA_GEN5_update.zip.
At the first time it works, I can boot and I want to flash the system.ing and boot.img for Acer_A500_1.141.07_COM_GEN1 with the Acer ROM Flasher to get german language support.
The HowTo in den Android-hilfe tells my that I will get an error after reboot (right) and than I have to flash another update (can´t post link because I´m a noobie)
Now I´m stick in a bootloaderloop (android logo) and nothing will help.
I try flash the unbrick update again, but the only thing I get is the Bootloop at the android logo.
I need some serious help for this.
Thanks guys
triebstahl
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1132760 try this
if you are stuck in boot loop or having difficulty starting your phone, don't worry, there should be a way.
I have experienced this issue today after flashing wrong file causing my phone to stuck in boot loop. after searching in this forum and after spending over 3 hours, I finally managed to restore my phone and it is now working perfectly fine.
therefore, I thought of making a basic guide to try to resolve such issues. please note, this is a very basic guide to resolve problems with starting your phone, I am not professional but will try to share my experience and help anyone in need. this was done on X10i
lets start:
1- if you have a recent back up and have access to xrec, you can simply restore your phone
2- if you have access to xrec but don't have a backup, try to flash a new ROM
I tried the previous two steps but it kept saying can't mount SD, therfore try the following
3- if you don't have xrec access, use the flash tool
download from here http://www.multiupload.com/7H4JT35B6G
then flash generic 2.1 to your x10, I used this one http://www.mediafire.com/?sqv6274anzfzn2x
here is the guide on how to do it http://forum.xda-developers.com/showpost.php?p=10879528&postcount=3
I have had problem saying "install or re-install drivers", you just need to install the file in the drivers folder in the flash tool main folder and restart the flash tool program
4- after flashing this ROM, restart your phone and root it using the flash tool, after the root your phone will restart, then you need to ask for premession and click xrec to install xrec to your phone
5- before installing new ROM, please make sure that your baseband and karnel is compatible with it (because the ROM you flashed earlier has old karnel and you will be stuck again in the boot loop if you flashed 2.3.3 just like me, then you will need to start again and install new karnel before instaling 2.3.3 ROM or even restore 2.3.3 ROM)
(you can simply install the new ROM then restart in flash mode and flash the new karnel .71 or flash the karnel and restore your backup)
I know that my choices of flash tool version or generic 2.1 version might not be the best, but I used them and resolved my issue and hope it will resolve yours. for any question please do not hesitate to ask me.
credits to everyone who helped, I can't remember everyone because I read quite a lot so please forgive me
nice post my friend
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
it sounds to me that u may need to install the semc flash drivers.. inside the flashtool u may find a folder named drivers, go inside of that folder and install ggsetup.. also do u have pc companion installed?
tripico said:
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
Click to expand...
Click to collapse
can you post the log from the flash tool so I can see at which step exactly this massage came up
I am fairly novice when it comes to flashing so here's a pretty dumb question:
I have an X10a, can I use the X10i software that you've linked in your post or is it just going to brick my phone.
hi guys,
first of all,im not sure if this is the right place to post this thread,if not,sorry about it!
so,my problem is,on my huawei u8800 i was using a MIUI rooted rom,but it was unstable,so i just instaled the official latest rom 2.3.5 gingerbread from huawei's website..thing is,as this is an UPDATE.APP file i have now lost my CWM and it has been replaced to "android system recovery 3e"(or utility) and now everytime i want to get in CWM i cant,i found this room annoying as it is allready the 4th time that after 2 or 3 days using this rom everytime i restart the phone or remove the battery it gets stuck on the animation bootstart..and i have to instal the rom again..so i found another rom (ics aurora_3.0_beta2) but i cannot install without CWM..android system recovery 3e only gives me "reboot sytem now,apply update from sdcard,wipe data/fact reset,wipe cache partition,touchscreen firmware update" and i need the other options like instal zip from sdcard,advanced,bla bla bla...does anybody knows how can i get this sorted out,im just e newbie,lol,so if someone knows please explain it to me!thanks guys
by the way,i wanted recovery-clockwork 5.0.2.6 instaled if possible!
ps,sorry for the big text
This link might help:
http://forum.xda-developers.com/showthread.php?t=1420728
Also check out aurora ics forum in development section for instructions on how to flash.
Edit: always check first post on a thread.
Official gb always removes everything from your phone, it is like a factory reset.
You need cwm 5.0.2.7 or 5.5.0.4 for aurora.
Try searching the forum for help, it is full of useful info!
solved
thanks man!!!did it just like it says and im now running aurora ics 4.0.4!!look really nice !good post!thanks
Glad it worked!
Moved To Q&A
Please post questions in the Q&A section
I want to install Jelly Bean on Motorola Defy+...
I had earlier installed it with this zip cm-10.2-20130917-NIGHTLY-mb526...
But since I tried to install kit kat on it which I m not able to....
So, I began from start
1. installed DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf than,
2. installed firmwaresbf to root it. Rooted Saw Superuser In Menu. Than,
3.insatlled CyanogenDefy Recovery v5.0.3.1-jordan recovery. than
4.Try to install cm-10.2-20130917-NIGHTLY-mb526. by going in custom recovery But now I got this Error
Installing Update...
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip
(Status 0)
Installation aborted.
5. Also want to install Team win recovery Project....
One More thing this is a same Zip from which I installed Jelly Bean on Defy+.... I haven't deleted it... so it Can't be corrupted I think so...
Please HELP.
Provide me your valuable assistance...
Tooooo many tutorials was posted on this subject. Is enough.
In the forum rules is stipulated that first search and if you NOT found anything then ask!
can u post a link of the forum that can explain.....
pgreed said:
Tooooo many tutorials was posted on this subject. Is enough.
In the forum rules is stipulated that first search and if you NOT found anything then ask!
Click to expand...
Click to collapse
can u post a link of the forum that can explain.....that will be very helpful
&
Thanks for Answering...
Pls Help....
it would've took you less time answering him than complaining.
Mate, I've had this very problem.
You need to flash an earlier version of cm. try cm10 or 10.1.
it doesnt work because you have an outdated recovery. flashing cm10 solves this.
Good luck!
edit: after you flash cm10 make sure to get the 20 oct version of cm10.2 as the 17 sept you tried to flash is not the latest
defynoob said:
it would've took you less time answering him than complaining.
Mate, I've had this very problem.
You need to flash an earlier version of cm. try cm10 or 10.1.
it doesnt work because you have an outdated recovery. flashing cm10 solves this.
Good luck!
edit: after you flash cm10 make sure to get the 20 oct version of cm10.2 as the 17 sept you tried to flash is not the latest
Click to expand...
Click to collapse
Not necessary. If you has follow my explanation (from other post) you've found that is another simplified method.
still Help Needed
pgreed said:
Not necessary. If you has follow my explanation (from other post) you've found that is another simplified method.
Click to expand...
Click to collapse
Try to install this with recovery but still getting same error cm-11-20131229-NIGHTLY-mb526.zip
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip
(Status 0)
Installation aborted.
Pls Help Me
no one there to HELP!
What happen is there no one who can provide any HELP to me...
As I want it much...
Pls Help Me...
thanks in advance..
I have the same problem now with my new Defy+.I had 2 Defys+ in past and just root and install 2init then instal .zip CM9 or CM10 and love it.Now I go to kill myself.From more than week I flash,install,reboot,reflash....and have no fully working Cm10.First I have no way to install newer than cm10.0!Any try with 10.1 or 10.2 is folow ERROR in the beginning and nothing more.My custom recovery now is CWM.Any try to update recovery or try with TWRP,or try dual recovery or,or...is going to boot loop or sot brick...Now Im on CM10/Android 4.1.2 and try to get telephony functions.Im in Bulgaria and before with previous Defys I use baseband switch to 342-145.Now just after install new ROM(CM10) telephony worked first couple of minutes,not more.After dialing it come to black screen or in normal incall screen but no voice from bot sides.I switch to other bands but nothing.It come to pissed me out.Please help
I go directly to CM11, it is much stable now.
Not able to install TWRP
Not able to install TWRP Tried by installing it from CyanogenDefy Recovery v5.0.3.1-jordan recovery and it says installed successfully from SD card but not able to boot in team win recovery project and therefore not able to install any CM version Yet
trying n getting nstalling Update...
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip or any other cm version
(Status 0)
Installation aborted.
Need help pls help me...:crying:
Sorry for my bad english. i look up nearly themes, and i can not found any information about xposed on ze601kl. I try to install xposed_x64.zip in boo:tloader, but install aborted, only error mesage i can see.
anasazi89 said:
Sorry for my bad english. i look up nearly themes, and i can not found any information about xposed on ze601kl. I try to install xposed_x64.zip in boo:tloader, but install aborted, only error mesage i can see.
Click to expand...
Click to collapse
my advice for now leave xposed alone until we get custom recovery like twrp because if you get a boot loop from any module your gonna have to re flash stock firmware to get out of boot loop