Related
Hello every one
After i try the new Android v4.2.1 rom by randomblame i want to get back to v4.1.2 but i did not format data this is what i think that brick my A500
So i recovered my device via EUUs_SBK_Acer_A500_1.016.05_COM_GEN1
but after that i couldn't flash any ics rom or ics bootloader
every time i try to flash ics bootloader with "blackthund3r_A500_APX_Flash_Tool_v0."@ the device stock during the process and stock in apx mod so i have to recover it again and so on
i have try : BabSector to format partition and try Afterota after th euus recovery but without luck
i can't even flash ics on hc bootloader "lightspeed 4.8"
now i'm running hc 3.2.1 rom by civato
what i'm doing wrong ? Help Please
I'm really missing CM10
bad English ....sorry
haytham-88 said:
Hello every one
After i try the new Android v4.2.1 rom by randomblame i want to get back to v4.1.2 but i did not format data this is what i think that brick my A500
So i recovered my device via EUUs_SBK_Acer_A500_1.016.05_COM_GEN1
Click to expand...
Click to collapse
So you can boot into the OS OK??
Did you root it?
You may have to take an OTA or update.zip to 3.1 first and flash the v8 from that as I'm unsure it will work from 3.0.1
but after that i couldn't flash any ics rom or ics bootloader
every time i try to flash ics bootloader with "blackthund3r_A500_APX_Flash_Tool_v0."@ the device stock during the process and stock in apx mod so i have to recover it again and so on
Click to expand...
Click to collapse
is their an "apx device" listed in hardware and printers or in your pc system tray?
do you get "acer apx mode" displayed on your tab?
now i'm running hc 3.2.1 rom by civato
Click to expand...
Click to collapse
go to the root guide in my sig and Make absolutely certain you do the first 4 steps in that guide.
d/l the latest apx Flash manager tool v 1.0.2 and use the bundle market in it to install bundle #17
OR
use civato's nvflash package instead as this requires your tab to be in apx mode (black screen/pwr lite on) to work AND will give you a more specific error if it fails.
Once the flash is complete BOOT STRAIGHT TO CWM and flash your cm10.1 rom
THEN Do a factory/data reset and enable wipe of /data/ media (in mounts/storage menu) wipe cache and dalvik cache too. Reboot to cm 10.1!!!
Please do all the steps in the order they are given -
If "it doesn't work" we will need you to tell us what is or isn't happening and where in the process it fails!!!
Good luck
Thank you for reply
dibb_nz said:
So you can boot into the OS OK??
Did you root it?
You may have to take an OTA or update.zip to 3.1 first and flash the v8 from that as I'm unsure it will work from 3.0.1
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Yes I can
It's rooted because it is a custom ROM with CWM Recovery 1.3.4 by Thor
Is it OK to flash the ICS Bootloader from HC 3.2.1 "Civato-FLEXSTRIKER-HC.3.2.1 R6-BASE"?
is their an "apx device" listed in hardware and printers or in your pc system tray?
do you get "acer apx mode" displayed on your tab?
Click to expand...
Click to collapse
Yes their is an "apx device"
and my tab shows "entering apx mode..." or something like that ! with ACER logo
go to the root guide in my sig and Make absolutely certain you do the first 4 steps in that guide.
d/l the latest apx Flash manager tool v 1.0.2 and use the bundle market in it to install bundle #17
OR
use civato's nvflash package instead as this requires your tab to be in apx mode (black screen/pwr lite on) to work AND will give you a more specific error if it fails.
Once the flash is complete BOOT STRAIGHT TO CWM and flash your cm10.1 rom
THEN Do a factory/data reset and enable wipe of /data/ media (in mounts/storage menu) wipe cache and dalvik cache too. Reboot to cm 10.1!!!
Please do all the steps in the order they are given -
If "it doesn't work" we will need you to tell us what is or isn't happening and where in the process it fails!!!
Good luck
Click to expand...
Click to collapse
"USB drivers from the Android SDK" on step 1 maybe that is what I need
So I'll give it a try and tell you what happens.
And again thank you for your help.
Well..
I followed your root guide and used Civato's nvflash package, lots of things happened.
file no 1 is the first result
then file no 2 , here is where I get stuck in apx mode again !!
errors i get :
error formating partition 4
error formating partition 6
The thing is, not every time I try to recover my tab it works
I succeed only once of every 15 tries to recover my tab.
so maybe some partitions are messed up or something.
One time, I tried to flash Civato's nvflash package again , and after few times the bootloader was flashed correctly, but the recovery wasn't !!
So, I tried to use fastboot to flash the recovery ... and it went O.K
After that, I restarted to recovery, formated data (factory reset) , cache , delvik cash, flashed the rom, rebooted the tab ...... but nothing happened !!
and i'm stuck here
I've done lots of searching around the forums and most of them recommend BabSector or tdv4_rollback_rom or EUUs .
only EUUs are working, and even that would work one time of around 10 to 20 tries.
do i have to flash the primery kernel via fastboot , and if so, how to get the kernel from the rom?
thanks in advance
haytham-88 said:
Well..
I followed your root guide and used Civato's nvflash package, lots of things happened.
file no 1 is the first result
then file no 2 , here is where I get stuck in apx mode again !!
errors i get :
error formating partition 4
error formating partition 6
The thing is, not every time I try to recover my tab it works
I succeed only once of every 15 tries to recover my tab.
so maybe some partitions are messed up or something.
One time, I tried to flash Civato's nvflash package again , and after few times the bootloader was flashed correctly, but the recovery wasn't !!
So, I tried to use fastboot to flash the recovery ... and it went O.K
After that, I restarted to recovery, formated data (factory reset) , cache , delvik cash, flashed the rom, rebooted the tab ...... but nothing happened !!
Click to expand...
Click to collapse
Boot to fastboot mode
Fastboot erase userdata, cache, system and flexrom - use separate command for each partition, note any write errors and post back.
Fire up apxflash tool....you MUST dump, save then use your tabs BCT when u get to that window - this should repair the bct error shown in the 2nd text file.
Also tick "show nvflash commands " this will show any read/write or partition errors..
If you get partition errors run babsector (d/l in the root guide) and follow the steps I posted there.
Boot directly to recovery and try flashing a rom again
I've done lots of searching around the forums and most of them recommend BabSector or tdv4_rollback_rom or EUUs .
only EUUs are working, and even that would work one time of around 10 to 20 tries.
do i have to flash the primery kernel via fastboot , and if so, how to get the kernel from the rom?
thanks in advance
Click to expand...
Click to collapse
No u shouldn't have to flash a kernel its included in the rom.
A full and complete erase is required first
(If there are errors here like can't read/write or bad data....your tab is toast) if not,
The bct error must be repaired next, else your tab won't flash any rom at all, even if the tool says PASS
Then reset your partitions with babsector.far
(Any errors like those listed above....your tab is toast)
With all the errors you're having its pointing to a faulty chip, flashing should not be this problematic.
Be sure to follow the direct order of repair....otherwise you'll be compounding errors
Sent from my A500 using Tapatalk 2
Sorry for my late reply
I didn't run apxflash tool I have try something before that I have flash a HC rom over the ICS bootloder "it is wrong I know" but it went OK and the tab boot to the rom!!!!!!!!!
So now I have ICS bootloader with HC rom. what is going on ??
I have a new long work "13 hour" and I can't spend alot of time with my tab but I want to understand what is wrong with my tab
I'm really thankful for your time.
haytham-88 said:
Sorry for my late reply
I didn't run apxflash tool I have try something before that I have flash a HC rom over the ICS bootloder "it is wrong I know" but it went OK and the tab boot to the rom!!!!!!!!!
So now I have ICS bootloader with HC rom. what is going on ??
I have a new long work "13 hour" and I can't spend alot of time with my tab but I want to understand what is wrong with my tab
I'm really thankful for your time.
Click to expand...
Click to collapse
Well, thats different!!!
Are you running stock HC or is it a custom one?
Which recovery are you using?
Download Acer Recovery Installer from the market, it will tell you your bootloader version. You will need root priveleges to run this
dibb_nz said:
Well, thats different!!!
Are you running stock HC or is it a custom one?
Click to expand...
Click to collapse
A custom rom, Civato-flexstriker-hc.3.2.1 r6
Which recovery are you using?
Click to expand...
Click to collapse
CWM Recovery v5.5.0.x(thor2002ro/digetx rev1.7.3)
Download Acer Recovery Installer from the market, it will tell you your bootloader version. You will need root priveleges to run this
Click to expand...
Click to collapse
Bootloader Version: 0.03.14-MUL
and i can acsses Skrilax_CZ's bootloader V8 bootmenu Mode and all of it's functions
i think that i did not understand the bootloader thing yet!!!
haytham-88 said:
A custom rom, Civato-flexstriker-hc.3.2.1 r6
CWM Recovery v5.5.0.x(thor2002ro/digetx rev1.7.3)
Bootloader Version: 0.03.14-MUL
and i can acsses Skrilax_CZ's bootloader V8 bootmenu Mode and all of it's functions
i think that i did not understand the bootloader thing yet!!!
Click to expand...
Click to collapse
ok lets start with the bootloader and why we need it...
On most android devices your first step to flashing a custom rom is to root so you can flash a custom recovery....
With our Acer Tabs since HC 3.2 the bootloader is locked...meaning even having root access did not give us the ability to 'flash' a custom recovery - its just not possible....the only way to do it is with the "patched" bootloader - I don't know how the magic works, but the devs managed to find a way to 'trick' the system into allowing their version of "patched bootloader" to be installed which would allow the flashing of a custom recovery....and there is a very specific way of getting this patched or unlocked bootloader onto your tab....this is with a program called "nvFlash" which runs via "apx mode" or "acer download mode" using our tabs unique ID, the cpuid.....to make it even easier The devs created a "package" which will nvFlash the patched bootloader AND a custom recovery all in one go!! Once we'd done that all we needed to do was to boot straight to recovery and flash our desired ICS or JB rom!!!
In the beginning, way back in the day....some folks weren't at all comfortable going to these lengths just to have a custom rom, so some of the rom cooks gave us the choice to upgrade to the patched bootloader or to stick with the HC bootloader, by flashing a custom HC kernel after the bootloader flash....this is what you were alluding to earlier??
Most roms now only work with the patched bootloader i.e. skrilax_cz 3.14 MUL -v8
keep in mind these are ICS and JB roms...
I hope that provides a bit more understanding on the bootloader thing and why we need it...
Now back to your original problem, not sure why you cannot flash a JB rom, have you tried it again??? I just cannot think of anything that would prevent you from flashing anything except an HC Rom - You might wanna ask the question in the JB rom thread...there might have been specific steps you needed to take to downgrade from 4.2 (can't think what though) or others may have posted similar problems...sorry couldnt help you out ....
...but let us know how you get on, good luck!!
Finally I have moved from HC to JB and that is how :
- ubdating the bootloader from v8 to v9
- nothing changed trying to flash any rom I already have
- then and I don't know why I download an Android 4.3.1 from TegraOwners forums [WIP]A500/A501 JB-MR2(4.3.1) - V8t6
link http://forum.tegraowners.com/viewtopic.php?f=9&t=1312
flash the rom and everything went OK !!!
Finally Fixed
Finally I have moved from HC to JB and that is how :
- ubdating the bootloader from v8 to v9
- nothing changed trying to flash any rom I already have
- then and I don't know why I download an Android 4.3.1 from TegraOwners forums [WIP]A500/A501 JB-MR2(4.3.1) - V8t6
link http://forum.tegraowners.com/viewtopic.php?f=9&t=1312
flash the rom and everything went OK !!!
Hi, i just installed kernel for my xperia neo v , and im stuck in boot. I dont know what im doin bad there kernel and package from this thread,http://forum.xda-developers.com/showthread.php?t=2422687 sorry for baaad english
nightdancer said:
Hi, i just installed kernel for my xperia neo v , and im stuck in boot. I dont know what im doin bad there kernel and package from this thread,http://forum.xda-developers.com/showthread.php?t=2422687 sorry for baaad english
Click to expand...
Click to collapse
Hi,
it really is hard to tell what you're doing wrong if you don't give us information on what exactly you did, but heres how I installed it back then:
Install zip using Clockwork Recovery
Reboot your phone into fastboot
On a PC with an installed version of the android sdk, use fastboot to flash the boot.img from the zip to your phone (using fastboot flash boot boot.img)
Once it's done, reboot your phone and Firefox OS should load after the freeXperia logo
I hope that this fixes your problem, if it doesn't, you can post some more information on how you've installed the ROM.
Homer Jay Simpson said:
Hi,
it really is hard to tell what you're doing wrong if you don't give us information on what exactly you did, but heres how I installed it back then:
Install zip using Clockwork Recovery
Reboot your phone into fastboot
On a PC with an installed version of the android sdk, use fastboot to flash the boot.img from the zip to your phone (using fastboot flash boot boot.img)
Once it's done, reboot your phone and Firefox OS should load after the freeXperia logo
I hope that this fixes your problem, if it doesn't, you can post some more information on how you've installed the ROM.
Click to expand...
Click to collapse
[*]Install zip using Clockwork Recovery - cant do this, i have CM.11, and i have errors when i want install zip
Ok, i find the way. I installed cm9, then ur zip , everything was ok, but im stuck with quadrat .in the middle is written mozilla dev or smth like that. When i installed ur kernel i have freexpieria logo, and i cant go into recorvery.
i cant give u link i dont have 10 posts, rom for haida and kernel from inside build 19.11/2013
Greetings,
Quick history of the problem:
*I have a Defy, with stock rom, rooted, and TWRP 2.1. I have a full android backup with TWRP.
*I flash CM9-NIGHTLY-120716-Defy.zip. I reboot, everything is fine.
*I reboot into new CWM recovery, make another android backup with CWM.
*I install TWRP 2.1 again.
*I flash CM10-20120924-NIGHTLY-mb525.zip.
*But then, I immediately flash again TWRP 2.1 (I think that was a mistake).
*I reboot, CM10 works fine.
*But when trying to boot into recovery from (new) bootmenu, TWRP immediately crashes and phone reboots I have no recovery mode available.
*At this time, phone still boots into CM10 just fine.
*I spend many hours trying to find how to flash a proper recovery, but to no avail. In desperation, I then follow the same recovery install procedure I followed many time ago after rooting the phone (see for example "wiki.cyanogenmod.org/w/Install_CM_for_jordan"). So bootmenu 0.61 is installed.
*And now the phone always reboots into bootmenu 0.61; recovery cannot be accessed ("recovery.sh not found"); CM10 does not boot.
So the phone is (probably soft) bricked.
At this point, after reading different posts, the only solution I have in mind is to flash a stock sbf file. However, since most of my previous actions have resulted in worse and worse situation, I am not sure this is the best solution.
What would you advise?
Thank you,
Colinou
EDIT: after reading different posts, finally flashed stock rom with sbf file following tutorial in forums. No problem encountered, apart from starting over everything.
EDIT2: I now realise that the reason for always booting to bootmenu, was that bootmenu 0.61 was set to always boot to bootmenu! There is an option in the bootmenu to start phone to "default" instead of "bootmenu". Anyway, the recovery was still broken, so I needed to flash a SBF file anyway.
Help with SBF
ColinouRussie said:
Greetings,
Quick history of the problem:
*I have a Defy, with stock rom, rooted, and TWRP 2.1. I have a full android backup with TWRP.
*I flash CM9-NIGHTLY-120716-Defy.zip. I reboot, everything is fine.
*I reboot into new CWM recovery, make another android backup with CWM.
*I install TWRP 2.1 again.
*I flash CM10-20120924-NIGHTLY-mb525.zip.
*But then, I immediately flash again TWRP 2.1 (I think that was a mistake).
*I reboot, CM10 works fine.
*But when trying to boot into recovery from (new) bootmenu, TWRP immediately crashes and phone reboots I have no recovery mode available.
*At this time, phone still boots into CM10 just fine.
*I spend many hours trying to find how to flash a proper recovery, but to no avail. In desperation, I then follow the same recovery install procedure I followed many time ago after rooting the phone (see for example "wiki.cyanogenmod.org/w/Install_CM_for_jordan"). So bootmenu 0.61 is installed.
*And now the phone always reboots into bootmenu 0.61; recovery cannot be accessed ("recovery.sh not found"); CM10 does not boot.
So the phone is (probably soft) bricked.
At this point, after reading different posts, the only solution I have in mind is to flash a stock sbf file. However, since most of my previous actions have resulted in worse and worse situation, I am not sure this is the best solution.
What would you advise?
Thank you,
Colinou
EDIT: after reading different posts, finally flashed stock rom with sbf file following tutorial in forums. No problem encountered, apart from starting over everything.
EDIT2: I now realise that the reason for always booting to bootmenu, was that bootmenu 0.61 was set to always boot to bootmenu! There is an option in the bootmenu to start phone to "default" instead of "bootmenu". Anyway, the recovery was still broken, so I needed to flash a SBF file anyway.
Click to expand...
Click to collapse
Hi, can you please send a link for SBF, because I am having hard time searching.It seams that default link for SBF-s doesent work.
Thanks
Matija28 said:
Hi, can you please send a link for SBF, because I am having hard time searching.It seams that default link for SBF-s doesent work.
Thanks
Click to expand...
Click to collapse
Hi, Can you send me how to add twrp to stock sbf like which file will work from Motorola recovery menu or any apk ?
Hello,
Could you help me? The site sbf.droid-developers.org is offline. I need any retail sbf file to unbrick my defy mb526. Does anyone have a mirror for a stock rom of this device?
gabrielms26 said:
Hello,
Could you help me? The site sbf.droid-developers.org is offline. I need any retail sbf file to unbrick my defy mb526. Does anyone have a mirror for a stock rom of this device?
Click to expand...
Click to collapse
There is a link on quarx page,i used this to unbrick & root mine,if it helps ,i cannot post links so find it own.
Hai,
I don't remember where I downloaded the stock sbf file from, most likely from sbf.droid-developers.org, which is down now
However I kept a copy of the sbf file on my computer , it is a french retail version (but langage can be changed later), in case of desperate need, I can post it somewhere.
Nr
ColinouRussie said:
Hai,
I don't remember where I downloaded the stock sbf file from, most likely from sbf.droid-developers.org, which is down now
However I kept a copy of the sbf file on my computer , it is a french retail version (but langage can be changed later), in case of desperate need, I can post it somewhere.
Nr
Click to expand...
Click to collapse
I'm in need of an sbf file. I have a tmobile us defy will this work with it? my phone is in a bootloop. I searched high and low in this forum and on the internet all the links point to sbf.droid-developers.org or multiupload both are down. If anyone has any sbf files please upload them. thanks in advance.
axel2230 said:
I'm in need of an sbf file. I have a tmobile us defy will this work with it? my phone is in a bootloop. I searched high and low in this forum and on the internet all the links point to sbf.droid-developers.org or multiupload both are down. If anyone has any sbf files please upload them. thanks in advance.
Click to expand...
Click to collapse
I will send you a link by private message. I don't know if it will work with Tmobile, but at least you can boot your phone and flash another rom afterwards. At start it will ask you to login to motoblur, just cancel the requests, change language to english, and you're set.
Nr
defy stuck on CMR
hi guys i defy was stuck on boot it keeps on showing motorola logo then i think there is a problem i think i did a mistake that i nstalled Cynogen 7 and after using it for some time i again installed a back up from miui rom there i did a mistake and when iam on the recovery menu i cant select any option touchscreen is not working..pls help me guys
ONE Click Warranty Back
hello Friends This My First Thread on G 2014(Titan)
Now Get Yours Warranty Back In just one Click
No need to rememberer all this such big commands of FastBoot
i gonna present the simplest way to revert back to stock official Roms with both locked and unlocked Boatloader(after flash) which r Provided in the below links
Pls do press thanks If u really liked my work i need it :good:
best simple way in simple one click (action performed)
!!Disclaimer!!
NOTE: I am not responsible for any kind of boot-logo, corrupt partition,bricked devices, dead SD cards,other Issue etc As I am just new to android developing
This process have been tested personally on my device moto g 2104
NOTE :This Will wipe all your data so pls take all yours useful databackup
INSTRUCTION
1) Download and install the Basic Moto Drives in this http://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/97326/p/30,6720,9050
2)Download the required Official Firmware(KitKat,Lollipop) form here https://mega.nz/#F!Q9YHCQzY!dgyvAJ8eNA3t7az4vizwOQ which i have taken Through Original Motorola Firmware Collection[Thread] thanks to @gregor160300
all the Firmware are Official images and are uploaded Recently
3)Download the OneClick Tool zip according to yours need a(locked) and b(Unlocked) form Here
a)restore with locked Boatloader Here https://drive.google.com/open?id=0By-2WiK-9wJqfmlMT3BoMmxqakU0M0lJdDk0OGF3UmVJZWN5eW90a0pIdUtSU3BRb0pxbms
b)restore with unlocked Boatloader Here https://drive.google.com/open?id=0By-2WiK-9wJqfktRWG1wbFJ6S2JnLU5FTFBNUWp2ckRZWnZmMUVfV1hiX3JjUGw0am1LR2s
4)Now Extract the Firmware zip to a Particular Folder at your given location on your PC/Laptop
5)After That Extract the OneClick zip to a Same Folder (Where U have the Extracted the Firmware Files)
6)Boot your Moto G 2014 into FastBoot Mode and plug your Device into your computer (pls Make sure u have all the proper device drivers are installed)
6)Finally Go To the Extracted Folder and u will see OneClick .bat file just click on OneClick
U r done Njoy till its gets Completed
All the Firmware are Official images Your warranty may not Void also u may get Yours Warrenty Back
hope u Enjoy this
PLS DON'T MIRROR THE LINKS
sry for my bad english i will improve
special Thanks to both @ archies20 @gregor160300,Shawn5162 for their thread:laugh::laugh:
Please Do press Thanks button if u really liked My Work i really need it :good:
It's For Indian Version ?
yes u can check this according to the indian baseband
Tried it today and it worked flawlessly, thanks!
heeey thanks 4 the reveiw hope i will come with other thread
so hey guys. i have a moto g 2014 xt1068 dual sim variant. for some reason after unlocking bootloader, flashing TWRP, and flashing an other ROM(blisspop 5.1.1) for some reason my first sim card slot was like not working at all and my second sim doesnt have mobile data only calls. So I flashed stock firmware 5.0.2(RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml) but the problem still exists. I dont know what to do :'( any help?
Mike20017 said:
so hey guys. i have a moto g 2014 xt1068 dual sim variant. for some reason after unlocking bootloader, flashing TWRP, and flashing an other ROM(blisspop 5.1.1) for some reason my first sim card slot was like not working at all and my second sim doesnt have mobile data only calls. So I flashed stock firmware 5.0.2(RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml) but the problem still exists. I dont know what to do :'( any help?
Click to expand...
Click to collapse
Change both sim slots?
do a clean Install make a try if still not working change the baseband version and check out again if still not working den hope a hardware fix will resolve it
Hello,
First things first: thanks for this great tool! I needed to restore the original firmware and didn't know how to do that. With this tool it's quite simple.
I had only two small problems:
- the first time I've run tour .bat file I seen several commands being executed, all of the m with an OK in the end, but after all process the phone didn't boot, no recovery also. I ran the .bat file a second time and it's OK now.
- another strange thing happened: the boot logo screen reverted to the "unlocked bootloader" screen.
A question: can I flash only the bootlogo screen via adb?
Moto bootloop struck help help
Hello can any senior member plz help me out.
I have unlocked and rooted moto g2 2014 mobile it was working fine.
But I done a stupid thing by editing system file and overwriting it.
Then my phone stuck in boot loader
I can access recovery TWRP i tried to wipe Delvic and cache and factory resetting but it did'nt worked.
Therefore buy following the link i tried to flash with orginal frimware
www droidviewsmoto g 2014 to stock and lock the bootloader
it was not successful again it strucked in boot loop with Android dead symbol in recovery
------>> Then tried to install TWRP recovery it was successful, but unable to install super user.
There fore I tried to repeat the process buy using both sdk windows platfom tools and vfastboot
buy typing command in cmd as mfastboot.exe oem lock begin
and noticed error saying
hab check failed for boot
failed to verity hab image boot
failed to validate boot image
Plz sir can any one help me out plz
yes
yes u can using the img file
follow this instructions to remove the warning instruction
http://www.bhudroid.com/2015/08/remove-unlocked-bootloader-warning-on.html
Kindly First Update yours boot loader Version
Kindly First Update yours boot loader Version
this can be the an issue
and after that cleanly flash the latest TWRP recovery
and Finally any Latest Build Custom Rom
this may Works
Marcelo_RJ said:
Hello,
First things first: thanks for this great tool! I needed to restore the original firmware and didn't know how to do that. With this tool it's quite simple.
I had only two small problems:
- the first time I've run tour .bat file I seen several commands being executed, all of the m with an OK in the end, but after all process the phone didn't boot, no recovery also. I ran the .bat file a second time and it's OK now.
- another strange thing happened: the boot logo screen reverted to the "unlocked bootloader" screen.
A question: can I flash only the bootlogo screen via adb?
Click to expand...
Click to collapse
yes u can using the img file
follow this instructions to remove the warning instruction
http://www.bhudroid.com/2015/08/remove-unlocked-bootloader-warning-on.html
Kindly First Update yours boot loader Version
sudheerkk87 said:
Hello can any senior member plz help me out.
I have unlocked and rooted moto g2 2014 mobile it was working fine.
But I done a stupid thing by editing system file and overwriting it.
Then my phone stuck in boot loader
I can access recovery TWRP i tried to wipe Delvic and cache and factory resetting but it did'nt worked.
Therefore buy following the link i tried to flash with orginal frimware
www droidviewsmoto g 2014 to stock and lock the bootloader
it was not successful again it strucked in boot loop with Android dead symbol in recovery
------>> Then tried to install TWRP recovery it was successful, but unable to install super user.
There fore I tried to repeat the process buy using both sdk windows platfom tools and vfastboot
buy typing command in cmd as mfastboot.exe oem lock begin
and noticed error saying
hab check failed for boot
failed to verity hab image boot
failed to validate boot image
Plz sir can any one help me out plz
Click to expand...
Click to collapse
Kindly First Update yours boot loader Version
this can be the an issue
and after that cleanly flash the latest TWRP recovery
and Finally any Latest Build Custom Rom
this may Works
thnks .......
woow its working great . very simplest way thank u so much
bhu999 said:
heeey thanks 4 the reveiw hope i will come with other thread
Click to expand...
Click to collapse
Can I get OTA update after this ?
I just want to know can I get OTA update after this if Motorola roll out any update in the near future.
mudit56 said:
I just want to know can I get OTA update after this if Motorola roll out any update in the near future.
Click to expand...
Click to collapse
Yes
woow...
wow its working great for me... very simply to use ... am not face any bugs.......... thanks for your work:good:
@bhu999 Thanks it worked awesome.
one question can i get official OTA update from Motorola if i root my device now ??? Because for rooting custom recovery is required and it is impossible to get OTA while on custom recovery. Right ??
yes u can but with stock recovery
just flash the stock recovery to get the available update also
In One Click method u can get the official available update after completing the whole procedure
Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)
If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC
Spumpkin said:
Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)
Click to expand...
Click to collapse
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk
renzo090513 said:
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk
Click to expand...
Click to collapse
cm11 => jb bootloader
cm12, cm12.1 and cm13 => kk bootloader
klemenSLO said:
If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC
Click to expand...
Click to collapse
The current version is 2.8.7.3. Should I try other versions?
Did you solve the issue? Or is it still not allowing you to get into your F/W?
staylecrate said:
Did you solve the issue? Or is it still not allowing you to get into your F/W?
Click to expand...
Click to collapse
Hi!
I tried to install TWRP version 2.6.6.3, but it fails to flash it so I'm stuck with the version 2.8.7.3. All I'm able to enter is just the recovery mode. I can't enter the download mode so I can't flash the stock firmware.
Currently I'm out of ideas. I can't flash any OS, the TWRP fails everytime and creates errors.
Try flash bumped kernel like lp dorimanx then flash bumped bootstak then lp rom like cloudy or stock. Or google this: lg g2 unbrickable now xda ...that work for me