Database Users

replacment screen for my uni..

jep.. i broke my screen.
i guess i sat on it or dropped it when is was boozed up ..
its got a crack in it and its not coverd by the garantee, whoe.. what a surpirse ..
does anyone knows what type number the touchscreen is?? i can fix it myself..
but i have no idea where i can buy the correct type screen..
can anybody enlighten me ??
greetz sub

I bought mine on eBay from e2_shop.
Not sure if the link works but for instance: Brand New OEM O2 Exec/Qtek 9000/MDA Pro Full LCD screen

Broke my screen a couple of days ago.
Im on my way to buy a used universal (need new screen + frame) and I wonder If I will be able to replace the screen + frame without hardresetting the unit. I have downloaded the service manual but I couldnt find any info regarding that. If any one have any useful tips on replacing screen + frame plaese let me know. Do I have to take the phone apart or is it possible to replace screen and frame only by loosing the screen?
Thanks in advance,
Miki

Broken screen, where can i get a replacement?

Guys,
My partner just closed my phone in her car boot. It works fine which is good however, half the screen is cracked and dead not good. Will it be chaeper to find a replacement screen, by another Trinity or move to something new.
Where could I by a new screen?
I appricated your comments.
Rich

think i have answered my own question...
http://cnn.cn/shop/p3600dopod-d810-screen-p-1734.html?osCsid=d538dc0645483ca7551cfc78c4c9fab2
anyone now anywhere in the uk?
do I need special tools to fit this?

Hello just for information,
I broke my trinity screen and I baught a new screen to a HK seller and i replace it.
I had already flash the firmware (faman 3.6 full) before changing the screen.
So everything seems ok when I put the phone power on but As soon as I put the creen off, I am unable to put it on it appears every time in a complete white screen !!!! to have something on the screen I have to reboot the phone.
I just reflash the phone again with faman 3.6 and it's still the thame problem completly white after turn the screen off then on ...
I try also an official orange WM5 (gps active) and the screen work's well i try after to switch again in WM6 and it doest work :white screen again ...
Can every one help me ?

@ Rich: Check the 'How to dissamble the Trinity' thread. Are your sure that the LCD is broken ? Could also be just the digitizer (USD 8 at cnn.cn.shop).
If you succeed to dissamble the display you should be able to attach a new digitizer.
The only problem are the two black levers ... (one for the display cable, one for the digitizer).
Good luck
Christian

I cracked my Trinity screen with a bad golf swing. Then I bought a replacement screen on ebay, found a disasembly guide, took my trinity apart, replaced the screen, put everything back together, and it works fine! cost me 70 EUR to fix it.
do it following the disassembly guide - taking the trinity apart is rather complicated, you will not figure it out by yourself.
Sometimes I wonder what the engineers drink before designing such complex assemblies!

Just fixed my Digitizer

I have just got my replacement digitizer in the mail 2day from Hong Kong and installed it just now, all is working perfectly as new again. I did a hard reset when the touch screen was first playing up, so I have lost all my themes, settings etc but luckily my office docs etc are still intact.
Anyhow, I made a video on how to replace the touch screen, its only quick as I did not go from the disasembly part, as there is already videos and tutorials on this, so I just documented on the actual digitizer replacement, which is actually basic 2-5mins work, but I thought a vid would be good for any noobs needing it in the future.
Once I edit it all up I will post the video here.
If anyone needs help on replacing the digitizer just ask. DON'T be tricked into buying the LCD + Digitizer if you only need the touch screen, as it is very easy to do without the lcd, though some ppl disagree.
Thanks for reading, thread will be updatd with Vid asap.

Hi X86
I have a crack on the upper plastic case, thats prob. why I have dirt showing on screen. In your opinion where is it located and can I clean it ?

It seems as if (if the crack is on the actual original housing, not just a add-on case) that dirt/dust has fallen down inbetween the digitizer and the LCD, so you can see it through the touchscreen right?
This is fairly simple to fix, you will either need to patch up the crack with silicone or something (best from the inside so it does'nt look messy) OR buy yourself a whole nw housing which cost about US15-$20.
Then just pull your elf/in apart and use cotton tips and wipes to thoroughly clean the LCD and insides.
If you need any help, just let me know via PM or here.
?Good Luck!

Thanks
That was my feeling, now I just need courage to take apart the casing (either repair or replace )

Thanks for bringing up this issue in the forum and extending your hand to others.
I appreciate it alot.

Hi x86
I have read the sticky for disassembling the elf. Can you tell me if it's necessary to unscrew anything and remove the rear speaker in order to remove the front panel ?
Edit: I think I found the answer in the next pics, the 4 screws attach to the front panel, right ?

Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.

bjonmy said:
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
Click to expand...
Click to collapse
That sounds like both a Digitizer and LCD issue.
Red and white strips is caused by the screen, while the phone not sensing your fingers is caused by digitizer.
But you still managed to use something like mymobiler to rescue your stuff right?
Yeah, you're in Malaysia right? In Singapore, to get this items, we have to get it off ebay or dealextreme.com.
But be careful with this, it void warrenty.
If you send it to HTC service centre, it may cost $160> Singapore dollars.
Cheers,
Jeremy

Coby Kyros Tablet - Replacement Digitizer doesn´t work

Hello,
some time ago, I got this device Coby Kyros MID 7034 - 4 (7 inch) Tablet with Android.
with a broken Screen (LCD + Digitizer)
electrobi.de/out/pictures/generated/product/1/380_340_95/Tablet-PC-Coby-MID7035-4-7-kapazitiver-Bildschir_2.png
LCD + Digitizer Front picture:
dl.dropbox.com/u/20113482/digitizer/digitizer_front.JPG
Rear Picture:
dl.dropbox.com/u/20113482/digitizer/digitizer_rear.JPG
Detail View of the digitizer cable:
dl.dropbox.com/u/20113482/digitizer/cable_rear.JPG
I´ve ordered both parts as replacement from China, today they arrived. After connecting them I found out, that the digitizer seems not to react.
The LCD was OK.
I tried to connect the old digitizer to the new LCD and it did react somehow (I could press one button but that´s it)
Now my question is what should I do now? The problem is I didn´t attached the digitizer to the LCD becaue I am not sure now. (once glued nobody can separate it)
1.) Does a capacitive digitizer work when it is NOT attached to a LCD?
----> If not: this will be the problem and I will try again and come back later, but I don´t know this for sure right now if it have to be attached or not
If Yes:
2.) If the "standalone" digitizer should be able to work, is there any kind of "emergency mode" or diagnostic/test mode which allows to read the system info. (for example if the system recognizes the digitizer and so on)
I only got this (while pressing Power ON + Volume down). with the new LCD
dl.dropbox.com/u/20113482/digitizer/IMG003.jpg
Thank everybody for help. And sorry for my english.
PS:The links does not work, please copy them in Your browser manually

No solutions for this problem?
The problem is I can operate only the keys the touchscreen is dead.
So I search a way to enter some sort of "diagnostic mode" to find out if the digitizer is compatible or not.
The digitizer looks the same as the original (number of pins is the same too) but unfortunately its not DPT and the part number is not the same.
I can upload a photo of the new digitizer later. Its one from "Hotatouch"

I would really appreciate any advice.
Maybe its the wrong category I am writing in?

7034 screen
Hello,
Did you ever find out how to fix your 7034? My screen is also broke, and I cannot find where to purchase just the screen, Coby wants me to send in the whole unit for $50, but I'm sure the screen is a lot less expensive. Where did you find the replacement screen, and were you able to figure it out?
Thanks!
georg2010 said:
Hello,
some time ago, I got this device Coby Kyros MID 7034 - 4 (7 inch) Tablet with Android.
with a broken Screen (LCD + Digitizer)
electrobi.de/out/pictures/generated/product/1/380_340_95/Tablet-PC-Coby-MID7035-4-7-kapazitiver-Bildschir_2.png
LCD + Digitizer Front picture:
dl.dropbox.com/u/20113482/digitizer/digitizer_front.JPG
Rear Picture:
dl.dropbox.com/u/20113482/digitizer/digitizer_rear.JPG
Detail View of the digitizer cable:
dl.dropbox.com/u/20113482/digitizer/cable_rear.JPG
I´ve ordered both parts as replacement from China, today they arrived. After connecting them I found out, that the digitizer seems not to react.
The LCD was OK.
I tried to connect the old digitizer to the new LCD and it did react somehow (I could press one button but that´s it)
Now my question is what should I do now? The problem is I didn´t attached the digitizer to the LCD becaue I am not sure now. (once glued nobody can separate it)
1.) Does a capacitive digitizer work when it is NOT attached to a LCD?
----> If not: this will be the problem and I will try again and come back later, but I don´t know this for sure right now if it have to be attached or not
If Yes:
2.) If the "standalone" digitizer should be able to work, is there any kind of "emergency mode" or diagnostic/test mode which allows to read the system info. (for example if the system recognizes the digitizer and so on)
I only got this (while pressing Power ON + Volume down). with the new LCD
dl.dropbox.com/u/20113482/digitizer/IMG003.jpg
Thank everybody for help. And sorry for my english.
PS:The links does not work, please copy them in Your browser manually
Click to expand...
Click to collapse

georg2010 said:
Hello,
some time ago, I got this device Coby Kyros MID 7034 - 4 (7 inch) Tablet with Android.
with a broken Screen (LCD + Digitizer)
electrobi.de/out/pictures/generated/product/1/380_340_95/Tablet-PC-Coby-MID7035-4-7-kapazitiver-Bildschir_2.png
LCD + Digitizer Front picture:
dl.dropbox.com/u/20113482/digitizer/digitizer_front.JPG
Rear Picture:
dl.dropbox.com/u/20113482/digitizer/digitizer_rear.JPG
Detail View of the digitizer cable:
dl.dropbox.com/u/20113482/digitizer/cable_rear.JPG
I´ve ordered both parts as replacement from China, today they arrived. After connecting them I found out, that the digitizer seems not to react.
The LCD was OK.
I tried to connect the old digitizer to the new LCD and it did react somehow (I could press one button but that´s it)
Now my question is what should I do now? The problem is I didn´t attached the digitizer to the LCD becaue I am not sure now. (once glued nobody caepartsn separate it)
1.) Does a capacitive digitizer work when it is NOT attached to a LCD?
----> If not: this will be the problem and I will try again and come back later, but I don´t know this for sure right now if it have to be attached or not
If Yes:
2.) If the "standalone" digitizer should be able to work, is there any kind of "emergency mode" or diagnostic/test mode which allows to read the system info. (for example if the system recognizes the digitizer and so on)
I only got this (while pressing Power ON + Volume down). with the new LCD
dl.dropbox.com/u/20113482/digitizer/IMG003.jpg
Thank everybody for help. And sorry for my english.
PS:The links does not work, please copy them in Your browser manually
Click to expand...
Click to collapse
where did you buy the parts. I have the same problem. give a link or somthing please

loryboy said:
where did you buy the parts. I have the same problem. give a link or somthing please
Click to expand...
Click to collapse
unfortunately there is no specific link. It was the result of my research and contacting some sellers in china.

By the way, I didn´t use the parts for the replacement, so if anybody wants them, just write me a message.

Hi, this is the resistive one?

[Q] After replacement of screen, no more multitouch only dual touch

Hi all,
I recently dropped my phone and broke my screen. I ordered a complete frame and lcd/digitizer from eBay and everything seemed to work.
Touchscreen didn't feel right and I stalled a few multitouch tester apps.
I noticed only 2 points were registered. Third didn't show anything. Contacting the seller with this he suggested cleaning the contact points and looking elsewhere for answers.
Does anyone have any idea whether this the screen or something else?
I cleaned everything, all contact points with alcohol and even bought a new battery, because some said that could have weird issues as well.
Thank you in advance.
/edit: this is the link to the screen I bought: http://www.ebay.nl/itm/331224787829?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

look at controller chip ( that one on digitizer flex) - if it's not glued with black epo around , then 99.9% you got cheap china clone digitizer ...
here is pics of copy and org digitizers :
cheap copy / OEM

RolF2 said:
look at controller chip ( that one on digitizer flex) - if it's not glued with black epo around , then 99.9% you got cheap china clone digitizer ...
here is pics of copy and org digitizers :
cheap copy / OEM
Click to expand...
Click to collapse
The one I have looks te be an OEM version. I guess I have to open en different Nexus 4 and try to figure it out.
The smaller part looks to have a bigger IC on the picture. Mine has 2 connectors, but the smaller connector also has a smaller IC.
Thanks for your reply.