Related
I have had my N7 for a week now, and have unlocked and rooted it. I flashed the jr5 rom and it worked ok, but i decided I wanted to try the pure AOSP rom, so I did a data/cache/dalvik wipe and flashed the rom. It proceeded to boot and freeze at the Google screen. I rebooted into recovery, and attempted to restore from my backup (failed), flash the jr5 rom (failed), and reflash the AOSP rom (failed). I then decided to follow the instructions on ROOTZwiki and restore back to stock (although still unlocked). I restored to the factory image, and attempted to flash the CM10 AOKP rom, and was again met with the frozen Google screen. I made sure to wipe data and both caches each time i tried to flash a rom, but I always end up stuck at the Google screen. What could be causing this? I would really like to know if anyone has any idea, because I fully plan on running the full version of CM10 when it is released.
By wipe Data you did factory reset in cwm? And what version of cwm are you using?
Sent from my Nexus 7 using XDA Premium HD app
redmonke255 said:
By wipe Data you did factory reset in cwm? And what version of cwm are you using?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
yes i did a factory data reset each time. I am currently running v5.8.0.2 of cwm
could that be the problem? that my cwm is just outdated already?
No that shouldn't be causing your problems, although I would recommend flashing TWRP recovery through goo manager.
I would first download a ROM on your computer and check the MD5. Then mount your nexus over USB and copy the new ROM over to the nexus sdcard directory and while its connected use your computer to check the MD5 on your ROM while its on the device. Then wipe data, cache, dalvic cache and system. Then install the ROM and Gapps and reboot. Make sure its only the to, and not a desperate kernel or anything for right now. When you reboot give it 10 minutes or so the first boots are often way long.
If that doesn't do it copy the stuff on your SD card over to your computer and then format the SD card.
To install TWRP, install goo manager from the play store, when you open the app just press menu, you don't need to browse for files or anything. Just press menu and then choose Install OpenRecoveryScript and when its done reboot or reboot to recovery, can't remember which did the trick, and it may take a couple of times.
Also remember that booting through boot loader to recovery requires the USB cord to be connected to a computer to avoid the Google screen looping.
Hope some of this was helpful.
Sent from my Nexus 7 using xda premium
CharliesTheMan said:
No that shouldn't be causing your problems, although I would recommend flashing TWRP recovery through goo manager.
I would first download a ROM on your computer and check the MD5. Then mount your nexus over USB and copy the new ROM over to the nexus sdcard directory and while its connected use your computer to check the MD5 on your ROM while its on the device. Then wipe data, cache, dalvic cache and system. Then install the ROM and Gapps and reboot. Make sure its only the to, and not a desperate kernel or anything for right now. When you reboot give it 10 minutes or so the first boots are often way long.
If that doesn't do it copy the stuff on your SD card over to your computer and then format the SD card.
To install TWRP, install goo manager from the play store, when you open the app just press menu, you don't need to browse for files or anything. Just press menu and then choose Install OpenRecoveryScript and when its done reboot or reboot to recovery, can't remember which did the trick, and it may take a couple of times.
Also remember that booting through boot loader to recovery requires the USB cord to be connected to a computer to avoid the Google screen looping.
Hope some of this was helpful.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Thank you for taking the time to help me. Before I do the goo-manager/twrp install, are there any inherent advantages or disadvantages of using twrp as opposed to cwm? Also, I hadn't thought to check md5s after moving the roms, so I will be doing that from now on.
Twrp works just fine.
In your recovery, can you mount and unmount all your partitions without any errors?
Sent from my Nexus 7
am I finally doing it right?
I flashed EOS rom from a clean system and it worked fine. Decided to have gapps and installed via twrp. This would give me boot loop into recovery no matter wat combination of cache clearing etc used. So finally I did the counter intuitive and installed gapps zip followed by ROM zip. This seems to have worked though it seems backwards to me. Is this the correct procedure?
crache said:
am I finally doing it right?
I flashed EOS rom from a clean system and it worked fine. Decided to have gapps and installed via twrp. This would give me boot loop into recovery no matter wat combination of cache clearing etc used. So finally I did the counter intuitive and installed gapps zip followed by ROM zip. This seems to have worked though it seems backwards to me. Is this the correct procedure?
Click to expand...
Click to collapse
no. did the rom already come with gapps? the rom would wipe out whatever gapps you did flash before the rom.
simms22 said:
no. did the rom already come with gapps? the rom would wipe out whatever gapps you did flash before the rom.
Click to expand...
Click to collapse
I don't like Twrp not being able to boot into recovery from holding the buttons, especially running into these loops during installs. Had the sameresults with cwm though.Now I am having this boot loop with TeamEOS as well as Skanky (neither package gapps) I however only loop if installing gapps after the rom or wiping caches.
If caches and system are wiped, gapps installed, then the rom I get a functioning system.Can anyone shed some light on what trigers specific loops or how to review tje errors / panics?
I'm reviving this thread since I have a similar issue. I am using TWRP. I have no problem performing a wipe (I do a factory reset, plus dalvik cache wipe), or flashing a new ROM (I've tried SGT7 and PA2.11). I can boot into the ROM fine. Once I try to flash Gapps, I get stuck in a boot loop that ends up going back to recovery. I've tried different combinations of operations, with different versions of gapps, but nothing works. I've tried:
gapps-jb-20120719-signed
gapps-jb-20120726-signed
both from goo.im, MD5 checked, without success. I'm stuck using SGT7, because that one includes Google account, and Play Store, so that can get me going... Only thing, I haven't wiped the data partition, because that's a bigger hassle. Do you guys have any clues as to what I should try next?
spked said:
I'm reviving this thread since I have a similar issue. I am using TWRP. I have no problem performing a wipe (I do a factory reset, plus dalvik cache wipe), or flashing a new ROM (I've tried SGT7 and PA2.11). I can boot into the ROM fine. Once I try to flash Gapps, I get stuck in a boot loop that ends up going back to recovery. I've tried different combinations of operations, with different versions of gapps, but nothing works. I've tried:
gapps-jb-20120719-signed
gapps-jb-20120726-signed
both from goo.im, MD5 checked, without success. I'm stuck using SGT7, because that one includes Google account, and Play Store, so that can get me going... Only thing, I haven't wiped the data partition, because that's a bigger hassle. Do you guys have any clues as to what I should try next?
Click to expand...
Click to collapse
Do you flash the rom and gapps and then reboot, or flash the rom, reboot, then flash gapps?
Did anybody get out of their bootloop? I flashed paranoid droid with twrp and I didn't select "signature verification" or "md5 check" as I read before hand on another forum that it wasn't needed and to actually not tick "signature"....so now I'm in a bootloop, volume buttons and power does get me in to a few selections, "reboot", "power off" and "recovery". When I select recovery it just takes me to the black screen with "Google" on it. No idea how to get out of this loop....I'm researching now but I am not understanding much....I'm so use to Samsung devices, getting out of bootloop with those are a piece of cake, this I'm clueless and helpless on. So does anybody have a way for me to either reflash the rom or get me to where I can go back to stock? I used wugfresh to root. Thanks.
dirtyhamster73 said:
Did anybody get out of their bootloop? I flashed paranoid droid with twrp and I didn't select "signature verification" or "md5 check" as I read before hand on another forum that it wasn't needed and to actually not tick "signature"....so now I'm in a bootloop, volume buttons and power does get me in to a few selections, "reboot", "power off" and "recovery". When I select recovery it just takes me to the black screen with "Google" on it. No idea how to get out of this loop....I'm researching now but I am not understanding much....I'm so use to Samsung devices, getting out of bootloop with those are a piece of cake, this I'm clueless and helpless on. So does anybody have a way for me to either reflash the rom or get me to where I can go back to stock? I used wugfresh to root. Thanks.
Click to expand...
Click to collapse
Can you get to bootloader?
If your using an older version of cwm it will boot loop and or cuase bad flashes with new builds
Upgrade cwm or just use twrp
Sent from my Nexus 7 using Tapatalk 2
Jordanooo said:
Can you get to bootloader?
Click to expand...
Click to collapse
I finally got in, so I'm all set. Thanks! I have no idea why I was having a hard time...twrp wouldn't pop up once I was in boot loader. I must of tried like 20 times. Anyway....I'm in and I just reflashed and it was fine.
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
armyboy11b said:
If your using an older version of cwm it will boot loop and or cuase bad flashes with new builds
Upgrade cwm or just use twrp
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I'm using twrp...for whatever reason I couldn't get it to pop up to reflash. But I'm good now. Thanks!
On my nexus 7 8gb model I tried flashing mmuzzyrom for grouper. No success. So I thought it was twrp that was causing the problem, so I flashed cwm and tried that. Also not successful. So then I thought it might be the roms, so I tried to flash cyanogenmod nightly and it didn't work. I noticed when I try to flash a rom it doesn't mount /system or anything but when I flash gapps it mounts /system and I think it actually works. Any ideas? Thanks
Did you run factory reset in recovery before flashing the rom?
Sent from my Galaxy Nexus
Pirateghost said:
Did you run factory reset in recovery before flashing the rom?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Won't that delete the rom? And my nandroid?
skiman10 said:
Won't that delete the rom? And my nandroid?
Click to expand...
Click to collapse
no. in fact you have to run factory reset in your custom recovery (CWM or TWRP) before flashing any rom....otherwise you get EXACTLY what is happening to you now. This is a well documented thing when flashing roms.
running FACTORY RESET in a custom recovery will wipe everything but /data/media where your 'sdcard' resides
Pirateghost said:
no. in fact you have to run factory reset in your custom recovery (CWM or TWRP) before flashing any rom....otherwise you get EXACTLY what is happening to you now. This is a well documented thing when flashing roms.
running FACTORY RESET in a custom recovery will wipe everything but /data/media where your 'sdcard' resides
Click to expand...
Click to collapse
Ah I get it now, actually I was trying to perform a dirty flash but I guess that isn't gonna work
Well thanks for your help
if you want your new rom to be performing well, its best NOT to do a dirty flash. some roms you can dirty flash between, but most require a factory reset.
you can almost ALWAYS do a dirty flash when upgrading from one version of the same custom rom to the next, but completely different custom roms will require a reset
Pirateghost said:
if you want your new rom to be performing well, its best NOT to do a dirty flash. some roms you can dirty flash between, but most require a factory reset.
you can almost ALWAYS do a dirty flash when upgrading from one version of the same custom rom to the next, but completely different custom roms will require a reset
Click to expand...
Click to collapse
Ok thanks for that info ill see what happens.
I did it!
Thanks so much! I'm a frickin idiot for thinking I could dirty flash.
skiman10 said:
Thanks so much! I'm a frickin idiot for thinking I could dirty flash.
Click to expand...
Click to collapse
You can get away with it when the ROM you are coming from is quite closely related to the ROM you are going to. For instance, if you were flashing CM 10.1 nightlies over the course of a few weeks. But in general, it's not really a great idea - it is a terrible idea for unrelated ROMs.
The best practice is probably to use something like TiBu or Carbon, and ONLY back up market apps and their data - never pre-installed system apps (e.g. gapps). For home screens, you can just use a launcher that allows backup/restores of it's home screen configurations.
Even in this case, you can still run into UID issues restoring market apps & data - it appears that the Android boot process assigns UIDs in a serial fashion (without any gap between system apps and market apps), so as soon as it runs through all the .apks it finds in /system/app, it continues with the next (+1) UID available for the .apks found in /data/app. The net result of this is if you install a ROM that has more .apks in /system/app than your prior ROM did, it is likely you will have common-uid collision issues. The custom recovery "fix permissions" can try and fix this up - I'm not sure if they cover all the bases though (multiple user accounts, stuff in /data/app-secure, etc).
good luck
I read where they're building these with Loki already installed now. Is this true? I tried to install the latest ROM awhile ago in TWRP, and it failed about as soon as it began. Any suggestions?
Have the driver's install
Place your phone into USB Debugging and hook it up
Use this to install another recovery
Flash properly as in Full reset, Wipe both caches, and format /system before flashing, unless you are on an older nightly, then skip the Full reset, and try and dirty flash with the other steps.
LostInMyHead said:
Have the driver's install
Place your phone into USB Debugging and hook it up
Use this to install another recovery
Flash properly as in Full reset, Wipe both caches, and format /system before flashing, unless you are on an older nightly, then skip the Full reset, and try and dirty flash with the other steps.
Click to expand...
Click to collapse
Could you explain this in some more depth please? I'm a total noob and am not understanding. Sorry.
bfishy22 said:
Could you explain this in some more depth please? I'm a total noob and am not understanding. Sorry.
Click to expand...
Click to collapse
PM me
same problem
I have the same problem I tried to install 3 different roms and get the fail message and then when I reboot have to re-root and I just don't know what I'm doing wrong. I have followed all steps given and still same problem if you can help me with this I would really appreciate it.
Honestly I think there is a problem with these nightly ROMs because when I install one, and reboot, I just get a black screen.
Sent from my GT-I9505 using xda app-developers app
I updated my phone to latest liquidsmooth rom two days ago and the phone freezes and restarts/reboots randomly like sometimes when im on phone/ playing a game/ using browser/ connected to charger. Yesterday I changed rom to latest carbon rom. Did install (3 wipes) as told in the thread but im still having the reboots.
Im using TWRP recovery and had used Utility 1.10 to go back to stock from Energy rom with safestrap recovery.
Can tell me whats the prob? Is it the kernel problem?
Have you tried upgrading or reflashing TWRP and then doing a clean install of Carbon? Its probably worth doing a fresh download of each first just to make sure you cover all your bases. These reboots were happening to me a few months ago and it drove me mad. following these steps fixed it for me.
jcxmej said:
I updated my phone to latest liquidsmooth rom two days ago and the phone freezes and restarts/reboots randomly like sometimes when im on phone/ playing a game/ using browser/ connected to charger. Yesterday I changed rom to latest carbon rom. Did install (3 wipes) as told in the thread but im still having the reboots.
Im using TWRP recovery and had used Utility 1.10 to go back to stock from Energy rom with safestrap recovery.
Can tell me whats the prob? Is it the kernel problem?
Click to expand...
Click to collapse
Honestly, if you're using SafeStrap, that might be your problem. Remove SS and flash the ROM in TWRP. If your bootloader is unlocked, you don't really want to use SS. Also, make a stock backup in TWRP, prior to flashing. This way, it will be easier for you to recover in the future, and you won't need to go through the painful process of fastboot.
RikRong said:
Honestly, if you're using SafeStrap, that might be your problem. Remove SS and flash the ROM in TWRP. If your bootloader is unlocked, you don't really want to use SS. Also, make a stock backup in TWRP, prior to flashing. This way, it will be easier for you to recover in the future, and you won't need to go through the painful process of fastboot.
Click to expand...
Click to collapse
Like I said on first post Im using TWRP now. Previously I was using safestrap. I removed it and installed TRWP. Anyways thanks.
PantherVT said:
Have you tried upgrading or reflashing TWRP and then doing a clean install of Carbon? Its probably worth doing a fresh download of each first just to make sure you cover all your bases. These reboots were happening to me a few months ago and it drove me mad. following these steps fixed it for me.
Click to expand...
Click to collapse
Thanks man. I will upgrade TWRP or reinstall it first. Thanks for that tip. Will post again if it doesnt work.
Still having those restarts. Really irritating. Froze and rebooted 4 5 times today morning while I was on call and trying to message. I reflashed reinstalled everything. I used both Utility 1.10 and 1.20. Im getting reboots even the stock ROM after using the Utility. I am confused which Utility I should be using. I had no issue of rebooting before flashing using Utility. Can someone give me exact procedure to reflash so that i know i am not missing out anything.
jcxmej said:
Still having those restarts. Really irritating. Froze and rebooted 4 5 times today morning while I was on call and trying to message. I reflashed reinstalled everything. I used both Utility 1.10 and 1.20. Im getting reboots even the stock ROM after using the Utility. I am confused which Utility I should be using. I had no issue of rebooting before flashing using Utility. Can someone give me exact procedure to reflash so that i know i am not missing out anything.
Click to expand...
Click to collapse
you might need to do a clean install.
- what version of TWRP are you using (anything other than 2.4 should be fine)?
- to perform the clean install, mount system, then try wiping everything (system, factory reset, & internal storage) - DO NOT WIPE external SD (I presume this is where you store the ROM files
- after wiping, reboot recovery, then install whichever 4.2.2 ROM you want follow by the GApps (use the 3/2013 version)
jco23 said:
you might need to do a clean install.
- what version of TWRP are you using (anything other than 2.4 should be fine)?
- to perform the clean install, mount system, then try wiping everything (system, factory reset, & internal storage) - DO NOT WIPE external SD (I presume this is where you store the ROM files
- after wiping, reboot recovery, then install whichever 4.2.2 ROM you want follow by the GApps (use the 3/2013 version)
Click to expand...
Click to collapse
Since TWRP wasnt working for me, I tried flashing with CWM recovery by hashcode. Still had reboots. I was using TWRP 2.3.2.3
When you say wipe everything, does it include 'modem' and 'pds'? Saw these two options also inside Mount/Format menu of CWM recovery.
Also there was an option 'Mount sdcard' (internal I suppose) but when i click it nothing happens it remains as Mount sdcard. Rest of it changes from Mount to Unmount. Is there some problem with that?
Do I have to just Mount system only? Also after rebooting recovery do I have to mount system again?
I try again as you said meanwhile.
jcxmej said:
Since TWRP wasnt working for me, I tried flashing with CWM recovery by hashcode. Still had reboots. I was using TWRP 2.3.2.3
When you say wipe everything, does it include 'modem' and 'pds'? Saw these two options also inside Mount/Format menu of CWM recovery.
Also there was an option 'Mount sdcard' (internal I suppose) but when i click it nothing happens it remains as Mount sdcard. Rest of it changes from Mount to Unmount. Is there some problem with that?
Do I have to just Mount system only? Also after rebooting recovery do I have to mount system again?
I try again as you said meanwhile.
Click to expand...
Click to collapse
nope, just system/factory reset/internal storage.
yes, make sure everything is mounted (checked) so that they read "unmount"
jco23 said:
nope, just system/factory reset/internal storage.
yes, make sure everything is mounted (checked) so that they read "unmount"
Click to expand...
Click to collapse
Did exactly like said. Got into CWM recovery. Mounted system. Formatted system, data, cache, sdcard. Did factory reset and wiped the caches. Then rebooted recovery. Then installed the ROM, 3/13 gapps, gsm fix. Reboot system. Still no use. I got 2 reboots in 5 mins in the ROM. I checked the md5 of the files and its ok. Dont know what else to try?
jcxmej said:
Did exactly like said. Got into CWM recovery. Mounted system. Formatted system, data, cache, sdcard. Did factory reset and wiped the caches. Then rebooted recovery. Then installed the ROM, 3/13 gapps, gsm fix. Reboot system. Still no use. I got 2 reboots in 5 mins in the ROM. I checked the md5 of the files and its ok. Dont know what else to try?
Click to expand...
Click to collapse
which ROM are you trying to install?
jco23 said:
which ROM are you trying to install?
Click to expand...
Click to collapse
LiquidSmooth v2.9 by DHacker29
http://forum.xda-developers.com/showthread.php?t=2373703
I have also tried Carbon ROM but was having reboots with that too. I liked liquidsmooth better so trying to make this work.
jcxmej said:
LiquidSmooth v2.9 by DHacker29
http://forum.xda-developers.com/showthread.php?t=2373703
I have also tried Carbon ROM but was having reboots with that too. I liked liquidsmooth better so trying to make this work.
Click to expand...
Click to collapse
are you flashing a kernel at the same time?
I would recommend trying a basic 4.2.2 ROM right now - like unoffical AOKP.
another problem could be the GApps or GSM fix. try installing just the ROM without the GApps perhaps?
carbon was very solid too. unfortunately, I can't help you with the GSM fix, as I am CDMA.
jco23 said:
are you flashing a kernel at the same time?
I would recommend trying a basic 4.2.2 ROM right now - like unoffical AOKP.
another problem could be the GApps or GSM fix. try installing just the ROM without the GApps perhaps?
carbon was very solid too. unfortunately, I can't help you with the GSM fix, as I am CDMA.
Click to expand...
Click to collapse
Okay i will try but had this reboot issue even with the stock ROM after flashing with Utility 1.20.
jcxmej said:
Okay i will try but had this reboot issue even with the stock ROM after flashing with Utility 1.20.
Click to expand...
Click to collapse
hmm.... not really sure then. perhaps you lost root? try re-installing SuperSU - I'm just grasping at straws here.
someone mentioned a similar issue:
http://forum.xda-developers.com/showthread.php?p=44317692#post44317692
jco23 said:
hmm.... not really sure then. perhaps you lost root? try re-installing SuperSU - I'm just grasping at straws here.
someone mentioned a similar issue:
http://forum.xda-developers.com/showthread.php?p=44317692#post44317692
Click to expand...
Click to collapse
I think I have root access I had no issue with it. Okay maybe I will check the thread you gave. Anyways I tried Eclipse ROM which is based AOKP. Still had reboots. So I switched back to liquid. Anyways Im gonna keep trying the basics. If anyone has any suggestions I could try its welcome.
PS. Should I flash another kernel with the ROM just in case ? I have been only installing ROM and gapps only till now.
jcxmej said:
I think I have root access I had no issue with it. Okay maybe I will check the thread you gave. Anyways I tried Eclipse ROM which is based AOKP. Still had reboots. So I switched back to liquid. Anyways Im gonna keep trying the basics. If anyone has any suggestions I could try its welcome.
PS. Should I flash another kernel with the ROM just in case ? I have been only installing ROM and gapps only till now.
Click to expand...
Click to collapse
I don't think changing the kernel will do it.... I suspect the issue is with your recoveries - will respond in other thread....
This isn't my very first time with flashing/rooting/etc. but I'm not that adept with it.
Got my S4 2 days ago but managed to get time today to work on it. I rooted successfully and everything was running perfect. I flashed over the newest Beanstalk ROM w/ gapps and it ran fine the first time it ran.
I can't get passed the Samsung Galaxy S4 boot logo every time I try to reboot the phone though...
If I wipe the cache/dalvik and reflash it still doesn't boot passed logo.
If I wipe the cache/dalvik and then wipe data (including the internal SD card, completely wiping it clean), flashing the ROM will work the first time it runs; once I reboot or just power it off then power it back on, stuck at Galaxy S4 logo... I let the ROM run first time through, input only what is needed to get to the home screen (google account/wifi setup/phone name/etc.), then I've tried rebooting it, shutting it down and powering it back up, letting everything update and waiting half an hour and restarting it... all have the same result, stuck at boot logo
I'm using TWRP, I have a recovery for stock but I don't want to use stock.
If anyone can help me out I'd appreciate it.
Try flashing a different compatible kernel.
ObrienDave said:
Try flashing a different compatible kernel.
Click to expand...
Click to collapse
This is EXACTLY what I was about to try... I'm literally reflashing the ROM fresh right now, going to put the kernel on the SD card, then reboot into recovery and wiping cache then flashing the kernel.
Will using a recovery that was made on a different kernel have any effect if I decide to use the recovery? I've heard bad things about flashing the wrong kernel (even though I know the one I'm about to use is the correct one) and really screwing stuff up if not done properly. I just want to make sure I don't screw anything up permanently.
Thanks.
Spazzzin said:
This is EXACTLY what I was about to try... I'm literally reflashing the ROM fresh right now, going to put the kernel on the SD card, then reboot into recovery and wiping cache then flashing the kernel.
Will using a recovery that was made on a different kernel have any effect if I decide to use the recovery? I've heard bad things about flashing the wrong kernel (even though I know the one I'm about to use is the correct one) and really screwing stuff up if not done properly. I just want to make sure I don't screw anything up permanently.
Thanks.
Click to expand...
Click to collapse
Use twrp 2.5.0.2 because if your using 2.6 its bringing problems. Also report this to their thread for better help
Sent from my SPH-L720 using xda app-developers app
Since there are no recovery categories according to this page,
http://forum.xda-developers.com/showthread.php?t=2303917
I don't see where it would matter. No guarantees though.
I do know it is ESSENTIAL to match the type (TW or AOSP) ROM and kernel to avoid major problems.
I also recommend TWRP 2.5.0.2
D/L TWRP from here:
http://techerrata.com/browse/twrp2/jfltespr
ObrienDave said:
Since there are no recovery categories according to this page,
http://forum.xda-developers.com/showthread.php?t=2303917
I don't see where it would matter. No guarantees though.
I do know it is ESSENTIAL to match the type (TW or AOSP) ROM and kernel to avoid major problems.
I also recommend TWRP 2.5.0.2
D/L TWRP from here:
http://techerrata.com/browse/twrp2/jfltespr
Click to expand...
Click to collapse
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Spazzzin said:
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Click to expand...
Click to collapse
Flashing a different kernel didn't do anything, I still keep getting stuck at the boot logo :/
Spazzzin said:
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Click to expand...
Click to collapse
Just flash it by odin by the link provided above. Make sure to use the tar file v 2.5.0.2
Sent from my SPH-L720 using xda app-developers app
---------- Post added at 09:22 PM ---------- Previous post was at 09:19 PM ----------
Spazzzin said:
Flashing a different kernel didn't do anything, I still keep getting stuck at the boot logo :/
Click to expand...
Click to collapse
By the way can you provide the steps and which files you flashing. Also redownload everything could be a bad download. Make sure to download them in computer and transfer them to your sd card
Sent from my SPH-L720 using xda app-developers app
I did a fresh install of the LiquidSmooth ROM and it's not hanging at boot logo whenever I reboot, and everything is working well. I suppose I'll stick with this for a while.
For my steps trying Beanstalk:
Boot into recovery (TWRP 2.6.0.0)
Factory reset;wipe cache/dalvik
Format Data
Factory reset;wipe cache/dalvik
Install ROM + Gapps
Wipe cache/dalvik
Reboot
I then tried doing that exact process, after letting it boot once I rebooted into recovery and flashed KT Kernel and wiped then rebooted and it hung at boot logo.
I did it again but I installed ROM + Gapps + Kernel then wiped then rebooted and it still hung at boot logo.
I'll download and prepare a new install of Beanstalk and give it another try tomorrow. I'll make sure to backup Liquid in case I want to switch back.
Thanks again for the help!
Glad it's working out for you.
If I may ask here; how do I know if a certain kernel is compatible with a ROM? I know to match the version (4.2, 4.3. etc,) and base (AOSP/ TW) but is there anything else specific that I need to watch out for that could cause problems with flashing a kernel on a ROM?
Spazzzin said:
If I may ask here; how do I know if a certain kernel is compatible with a ROM? I know to match the version (4.2, 4.3. etc,) and base (AOSP/ TW) but is there anything else specific that I need to watch out for that could cause problems with flashing a kernel on a ROM?
Click to expand...
Click to collapse
Not really unless the rom dev for some reason doesn't recommend using a certain one. Kernels will act differently for everyone even on the same device with the same rom. Just need to flash them and find out which one works the best for you (battery life, overheating, smoothness, etc).
Always have a backup handy just in case something doesn't work right.