I have had my N7 for a week now, and have unlocked and rooted it. I flashed the jr5 rom and it worked ok, but i decided I wanted to try the pure AOSP rom, so I did a data/cache/dalvik wipe and flashed the rom. It proceeded to boot and freeze at the Google screen. I rebooted into recovery, and attempted to restore from my backup (failed), flash the jr5 rom (failed), and reflash the AOSP rom (failed). I then decided to follow the instructions on ROOTZwiki and restore back to stock (although still unlocked). I restored to the factory image, and attempted to flash the CM10 AOKP rom, and was again met with the frozen Google screen. I made sure to wipe data and both caches each time i tried to flash a rom, but I always end up stuck at the Google screen. What could be causing this? I would really like to know if anyone has any idea, because I fully plan on running the full version of CM10 when it is released.
By wipe Data you did factory reset in cwm? And what version of cwm are you using?
Sent from my Nexus 7 using XDA Premium HD app
redmonke255 said:
By wipe Data you did factory reset in cwm? And what version of cwm are you using?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
yes i did a factory data reset each time. I am currently running v5.8.0.2 of cwm
could that be the problem? that my cwm is just outdated already?
No that shouldn't be causing your problems, although I would recommend flashing TWRP recovery through goo manager.
I would first download a ROM on your computer and check the MD5. Then mount your nexus over USB and copy the new ROM over to the nexus sdcard directory and while its connected use your computer to check the MD5 on your ROM while its on the device. Then wipe data, cache, dalvic cache and system. Then install the ROM and Gapps and reboot. Make sure its only the to, and not a desperate kernel or anything for right now. When you reboot give it 10 minutes or so the first boots are often way long.
If that doesn't do it copy the stuff on your SD card over to your computer and then format the SD card.
To install TWRP, install goo manager from the play store, when you open the app just press menu, you don't need to browse for files or anything. Just press menu and then choose Install OpenRecoveryScript and when its done reboot or reboot to recovery, can't remember which did the trick, and it may take a couple of times.
Also remember that booting through boot loader to recovery requires the USB cord to be connected to a computer to avoid the Google screen looping.
Hope some of this was helpful.
Sent from my Nexus 7 using xda premium
CharliesTheMan said:
No that shouldn't be causing your problems, although I would recommend flashing TWRP recovery through goo manager.
I would first download a ROM on your computer and check the MD5. Then mount your nexus over USB and copy the new ROM over to the nexus sdcard directory and while its connected use your computer to check the MD5 on your ROM while its on the device. Then wipe data, cache, dalvic cache and system. Then install the ROM and Gapps and reboot. Make sure its only the to, and not a desperate kernel or anything for right now. When you reboot give it 10 minutes or so the first boots are often way long.
If that doesn't do it copy the stuff on your SD card over to your computer and then format the SD card.
To install TWRP, install goo manager from the play store, when you open the app just press menu, you don't need to browse for files or anything. Just press menu and then choose Install OpenRecoveryScript and when its done reboot or reboot to recovery, can't remember which did the trick, and it may take a couple of times.
Also remember that booting through boot loader to recovery requires the USB cord to be connected to a computer to avoid the Google screen looping.
Hope some of this was helpful.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Thank you for taking the time to help me. Before I do the goo-manager/twrp install, are there any inherent advantages or disadvantages of using twrp as opposed to cwm? Also, I hadn't thought to check md5s after moving the roms, so I will be doing that from now on.
Twrp works just fine.
In your recovery, can you mount and unmount all your partitions without any errors?
Sent from my Nexus 7
am I finally doing it right?
I flashed EOS rom from a clean system and it worked fine. Decided to have gapps and installed via twrp. This would give me boot loop into recovery no matter wat combination of cache clearing etc used. So finally I did the counter intuitive and installed gapps zip followed by ROM zip. This seems to have worked though it seems backwards to me. Is this the correct procedure?
crache said:
am I finally doing it right?
I flashed EOS rom from a clean system and it worked fine. Decided to have gapps and installed via twrp. This would give me boot loop into recovery no matter wat combination of cache clearing etc used. So finally I did the counter intuitive and installed gapps zip followed by ROM zip. This seems to have worked though it seems backwards to me. Is this the correct procedure?
Click to expand...
Click to collapse
no. did the rom already come with gapps? the rom would wipe out whatever gapps you did flash before the rom.
simms22 said:
no. did the rom already come with gapps? the rom would wipe out whatever gapps you did flash before the rom.
Click to expand...
Click to collapse
I don't like Twrp not being able to boot into recovery from holding the buttons, especially running into these loops during installs. Had the sameresults with cwm though.Now I am having this boot loop with TeamEOS as well as Skanky (neither package gapps) I however only loop if installing gapps after the rom or wiping caches.
If caches and system are wiped, gapps installed, then the rom I get a functioning system.Can anyone shed some light on what trigers specific loops or how to review tje errors / panics?
I'm reviving this thread since I have a similar issue. I am using TWRP. I have no problem performing a wipe (I do a factory reset, plus dalvik cache wipe), or flashing a new ROM (I've tried SGT7 and PA2.11). I can boot into the ROM fine. Once I try to flash Gapps, I get stuck in a boot loop that ends up going back to recovery. I've tried different combinations of operations, with different versions of gapps, but nothing works. I've tried:
gapps-jb-20120719-signed
gapps-jb-20120726-signed
both from goo.im, MD5 checked, without success. I'm stuck using SGT7, because that one includes Google account, and Play Store, so that can get me going... Only thing, I haven't wiped the data partition, because that's a bigger hassle. Do you guys have any clues as to what I should try next?
spked said:
I'm reviving this thread since I have a similar issue. I am using TWRP. I have no problem performing a wipe (I do a factory reset, plus dalvik cache wipe), or flashing a new ROM (I've tried SGT7 and PA2.11). I can boot into the ROM fine. Once I try to flash Gapps, I get stuck in a boot loop that ends up going back to recovery. I've tried different combinations of operations, with different versions of gapps, but nothing works. I've tried:
gapps-jb-20120719-signed
gapps-jb-20120726-signed
both from goo.im, MD5 checked, without success. I'm stuck using SGT7, because that one includes Google account, and Play Store, so that can get me going... Only thing, I haven't wiped the data partition, because that's a bigger hassle. Do you guys have any clues as to what I should try next?
Click to expand...
Click to collapse
Do you flash the rom and gapps and then reboot, or flash the rom, reboot, then flash gapps?
Did anybody get out of their bootloop? I flashed paranoid droid with twrp and I didn't select "signature verification" or "md5 check" as I read before hand on another forum that it wasn't needed and to actually not tick "signature"....so now I'm in a bootloop, volume buttons and power does get me in to a few selections, "reboot", "power off" and "recovery". When I select recovery it just takes me to the black screen with "Google" on it. No idea how to get out of this loop....I'm researching now but I am not understanding much....I'm so use to Samsung devices, getting out of bootloop with those are a piece of cake, this I'm clueless and helpless on. So does anybody have a way for me to either reflash the rom or get me to where I can go back to stock? I used wugfresh to root. Thanks.
dirtyhamster73 said:
Did anybody get out of their bootloop? I flashed paranoid droid with twrp and I didn't select "signature verification" or "md5 check" as I read before hand on another forum that it wasn't needed and to actually not tick "signature"....so now I'm in a bootloop, volume buttons and power does get me in to a few selections, "reboot", "power off" and "recovery". When I select recovery it just takes me to the black screen with "Google" on it. No idea how to get out of this loop....I'm researching now but I am not understanding much....I'm so use to Samsung devices, getting out of bootloop with those are a piece of cake, this I'm clueless and helpless on. So does anybody have a way for me to either reflash the rom or get me to where I can go back to stock? I used wugfresh to root. Thanks.
Click to expand...
Click to collapse
Can you get to bootloader?
If your using an older version of cwm it will boot loop and or cuase bad flashes with new builds
Upgrade cwm or just use twrp
Sent from my Nexus 7 using Tapatalk 2
Jordanooo said:
Can you get to bootloader?
Click to expand...
Click to collapse
I finally got in, so I'm all set. Thanks! I have no idea why I was having a hard time...twrp wouldn't pop up once I was in boot loader. I must of tried like 20 times. Anyway....I'm in and I just reflashed and it was fine.
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
armyboy11b said:
If your using an older version of cwm it will boot loop and or cuase bad flashes with new builds
Upgrade cwm or just use twrp
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I'm using twrp...for whatever reason I couldn't get it to pop up to reflash. But I'm good now. Thanks!
Related
There are a few users having problems flashing the recent CM7 nightlies. Here is my scenario.
I'm running CM7.0.2 from EMMC. Last night I tried to flash N63. Downloaded the zip from here...http://mirror.teamdouche.net/?device=encore (where I always get them from). Rebooted to recovery, wiped cache and dalvik and installed the zip. Clicked reboot & got stuck at "ANDROID_". I did a hard reboot (holding down power). Booted back to recovery and did a full wipe (system, data, cache, and dalvik)...Installed the zip again, rebooted and same results. I tried re-downloading the mirror and I've tried installing it with my recovery sd. Everything yields the same results......"ANDROID_".
I can reboot to recovery, and load my nandroids (7.0.0, 7.0.2, Nookiecomb, and Phiremod), however I cannot get one of the new nightlies to flash. I have seen other people are having similar issues so I've started this thread in the hopes of resolving this. I have been working on this problem and searching XDA / Google and still no luck.
hockeyfamily737 said:
There are a few users having problems flashing the recent CM7 nightlies. Here is my scenario.
I'm running CM7.0.2 from EMMC. Last night I tried to flash N63. Downloaded the zip from here...http://mirror.teamdouche.net/?device=encore (where I always get them from). Rebooted to recovery, wiped cache and dalvik and installed the zip. Clicked reboot & got stuck at "ANDROID_". I did a hard reboot (holding down power). Booted back to recovery and did a full wipe (system, data, cache, and dalvik)...Installed the zip again, rebooted and same results. I tried re-downloading the mirror and I've tried installing it with my recovery sd. Everything yields the same results......"ANDROID_".
I can reboot to recovery, and load my nandroids (7.0.0, 7.0.2, Nookiecomb, and Phiremod), however I cannot get one of the new nightlies to flash. I have seen other people are having similar issues so I've started this thread in the hopes of resolving this. I have been working on this problem and searching XDA / Google and still no luck.
Click to expand...
Click to collapse
Ok, not a very experienced dev or anything that here. And I have not experienced this problem myself, but a few ideas to throw out:
- Are you trying to install an OC kernel after nightly, or not b4 getting stuck?
- Maybe restore 7.0.x reboot, make sure it comes back. Back into recovery, flash nightly with just a cache wipe, see if it comes up.
Ronin3178 said:
Ok, not a very experienced dev or anything that here. And I have not experienced this problem myself, but a few ideas to throw out:
- Are you trying to install an OC kernel after nightly, or not b4 getting stuck?
- Maybe restore 7.0.x reboot, make sure it comes back. Back into recovery, flash nightly with just a cache wipe, see if it comes up.
Click to expand...
Click to collapse
No OC kernel....Just trying to get the nightly to run before worrying about that. I can nanadroid back to any of my former roms with no problem. I'm going to try just doing a ONLY a cache wipe and load it again......just as soon as I run out of patience with my black "ANDROID_" screen of frustration, I'm currently looking at for the last 7 minutes.
Ronin3178 said:
Ok, not a very experienced dev or anything that here. And I have not experienced this problem myself, but a few ideas to throw out:
- Are you trying to install an OC kernel after nightly, or not b4 getting stuck?
- Maybe restore 7.0.x reboot, make sure it comes back. Back into recovery, flash nightly with just a cache wipe, see if it comes up.
Click to expand...
Click to collapse
Yeah........It's a no go. Nand back to 7.0.2, reboot to recovery, wipe cache only, instal zip for Nightly 63......."ANDROID_".....DAMMIT!!!!
I'm back to 7.0.2 again until someone has something else I can try.
Are you using cwm recovery 3.0.2.8?
Could be an issue if not.
Sent from my NookColor using Tapatalk
ansleyj44 said:
Are you using cwm recovery 3.0.2.8?
Could be an issue if not.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Interesting... I'm using 3.0.1. I'll try updating it tonight.
sent from my Ginger-Hero CDMA
ansleyj44 said:
Are you using cwm recovery 3.0.2.8?
Could be an issue if not.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Good call!!! I flashed Clockwork 3.0.2.8 and all is good. Flashed nightly 63 with no problems. Thanks!
sent from my Ginger-Hero CDMA
Just another quick note.....To anyone having problems overclocking the new nightly builds. You need to use the ext. 4 overclock kernel, which can be downloaded here......http://forum.xda-developers.com/showthread.php?t=925451&page=239
hockeyfamily737 said:
Good call!!! I flashed Clockwork 3.0.2.8 and all is good. Flashed nightly 63 with no problems. Thanks!
sent from my Ginger-Hero CDMA
Click to expand...
Click to collapse
Nevermind.
janko10 said:
Is there a way to update CWM without burning a new image to SD card? I currently have 3.0.1.0 as well and I don't want to wipe my rom or SD card just to update to 3.0.2.8 but I can't seem to find any other way to do that.
Sorry but this is my first Andriod device so bit of a noob here.
Click to expand...
Click to collapse
I was going to say ROM Manager, but forgot it doesn't have 3.0.2.8 for Nook.
Here is the recovery zip file, flash from CWR. http://db.tt/gDlb5mw
- download to your SD card for Nook, boot into CWR, choose install zip from SD/choose zip, flash, reboot recovery
I had CM7 installed on my phone, and then i proceeded to update to the beta 2. I downloaded the file, then unpacked it on my phone sdcard then proceeded to reboot in recovery mode and cleared cache , dalvik, factory settings and then updated the zip file. then clear everything again and reboot. Get stuck on dual core logo.
I can still access recovery and mount usb to add files. can anyone tell me how to fix this?
did you make a backup before installing the beta?
It seems like you've never installed a ROM before, so I would advise you to read before you try again.
Try and restore it from the 1.8.3 SBF or restore from the CM7 pre-beta2.zip.
Don't unpack the zip file.
Oh and I feel obligated to ask, but did you install romracer's recovery?
I have Tenfar's recovery. Does it matter?
When you say restore, do you mean going in recovery mode and then apply the beta-update2.zip?
I also beleive my recovery got updated to Clockwork's when I had CM7 beta installed?
I have read another post on here that suggest I should RSD flash the 1.8.3 SDF and just start anew.
Should I do that? I was on 1.8.3 prior to installing CM7 beta
I understand I probably come across as a complete noob, but I did read before I did anything.
And now this happened and I just need help fixing it, you can just say. Yes flash back to 1.8.3 with RSD, I don't need a dot point instruction on how to do that.
Now my recovery is "ClockworkMod Recovery v4.0.1.4" even tough i originally flashed Tenfar's
and my phone is unlocked.
I have tried many times to clear all caches and update the beta zip again and it does not work, I just get stuck on dual core logo again.
Thanks in advance for any help.
Redownload beta 2 again (I've had problems related to bum d/l's). Install romracers recovery. Wipe. Reinstall.
If that fails use fastboot -w to wipe and reinstall.
quicklyspent said:
Redownload beta 2 again (I've had problems related to bum d/l's). Install romracers recovery. Wipe. Reinstall.
If that fails use fastboot -w to wipe and reinstall.
Click to expand...
Click to collapse
Legend, thanks a lot now I can go back to sleep.
I installed romancer's recovery (unlike tenfar's it took like 5 times longer to clear cache and install the rom) but it did work.
thanks for taking the time man.
I think that you forgot to wipe cache and Dalvik cache from within CWM.
For me that did the trick ...
Sent from my Atrix using Tapatalk
Rayan said:
I think that you forgot to wipe cache and Dalvik cache from within CWM.
For me that did the trick ...
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
No I had wiped dalvik and cache prior and after update.
Either beta 2 doesn't like tenfars recovery or it was an issue with the download . Since I installed romancers recovery before I tried the new download we will never know
Sent from my MB860 using XDA Premium App
Why use tenfar's recovery when you can use CWM real recovery now.
That might help a lot...
im having the same problem but i used romracers recovery in the first place. ive tried everything and i tried to restore my alien backup but the recovery cant find it... did prebeta1 change the directory? im lost.
Fastboot -w.
Sent from my Motorola Atrix 4G MB860 using Tapatalk
Magnetox said:
Fastboot -w.
Sent from my Motorola Atrix 4G MB860 using Tapatalk
Click to expand...
Click to collapse
i tried that before and it didnt work.
edit- i found how to mount phone as usb in recovery. going to try the whole process again. i think my file was corrupt.
edit-- still cant get it to work even after redownloading teh file...
Ok guys..... newbie here .... literally I'm new to Boot unlocking, root, Flashing etc.
Anyway I have followed this forum for so long that I decided to take plunge yesterday and get my hands dirty.
Here is what I did:
Unlock bootloader, root and install recovery on my Atrix 4G. Atrix was @ 2.3.4 and 4.5.91 during unlocking & root.
Rebooted the phone and everything seems to be in place. Atrix loaded like the way I bought it 7 months back. No problem until now.
Also created a restore folder on my external SD. Worked fine and was successful in creating backup with time stamp
Now here are my steps and subsequent issues that I'm facing:
1. Downloaded CM9 zip file from this thread(http://forum.xda-developers.com/showthread.php?t=1500535) along with Gapps to my external SD
2.Entered recovery mode during bootup and tried to flash CM9 and Gapps. Flashing seem to have gone well and completed (note I did not do clear data, clear cache or clear dalvik cache under advanced options being a newbie)
3. Reboot the phone and can only see red Moto logo and unlocked on top. Left for about 5 minutes and nothing happened.
4.Did a battery pull and entered recovery mode. wiped data, cache & cleared dalvik cache
5.Went to Install zip from sdcard option and tried to reflash CM9. Flashing seems to have gone well and completed
6. Reboot phone and again can only see Moto Red logo with unlock on top and nothing more.
7.Battery pull followed by recovery. But This time I tried to restore from my external SD. also wiped data, cache & dalvik cache
8.Restore took about 3 minutes and completed.
9.Reboot the phone. Now the phone boots and goes to Rethink possible screen and get sstuck.
10. Left it for 1 hr....nothing.
11.tried steps 7-9 again and still stuck in "Rethink possible" screen during boot.
What did I do wrong? Did I soft brick the phone? I can still enter recovery mode and read my internal and external SD and can see all files. i hope I didn't brick my phone doing this. If I did, I would regret!
Here are my options:
1.Try a stable ROM like CM7 and see what happens. I didn't want to do too much damage so haven't tried this option yet.
2.I know there is a way to hide 'unlock' during boot up (if someone can point to it obviously). Hide the 'unlock' and return the phone to ATT and tell them that phone would not boot after 2.3.6 update and get a refurbished one
Please let me know what your thoughts are. I'm currently crapping on my pants
Edit: I just tried Newtrino rom and stuck @ Moto screen which says unlock.
Edit 3/4/2012: Please go to the last post for the solution. Tenfar's CWM is old and cannot deal with latest ROMs. Use ROMRACERS latest CWM or touch based Koush's CWM for future ROM flashing.
Old CWMs will give you sleepless nights!
Ok tried restore again after wiping data, cache & dalvik cache.
Now after reboot, My Moto Logo screen says unlock and just starts flashing.
I can still get into recovery......
can someone please help me......
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
vsg005 said:
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
Click to expand...
Click to collapse
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Masterguy said:
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Click to expand...
Click to collapse
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
littleemp said:
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
Click to expand...
Click to collapse
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
flash the latest recovery and wipe everything in recovery and flash neutrino again. It should work after that. try neutrino 2.2 though. 2.5 still has it's kinks.
1st off, relax. It's difficult to brick your phone from this point Just don't get any bright ideas with .sbfs lol.
As others have said, make sure you're on latest recovery.
Question: are you installing from internal or external SD? Internal is recommended for flashing most ROMs.
Sent from my MB860 using xda premium
Masterguy said:
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
Click to expand...
Click to collapse
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Solved:boot loop issue
littleemp said:
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Click to expand...
Click to collapse
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Masterguy said:
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Click to expand...
Click to collapse
Thank you sooo much. I was having this exact problem. I did what you suggested and my phone works. Thanks!
I updated my phone to latest liquidsmooth rom two days ago and the phone freezes and restarts/reboots randomly like sometimes when im on phone/ playing a game/ using browser/ connected to charger. Yesterday I changed rom to latest carbon rom. Did install (3 wipes) as told in the thread but im still having the reboots.
Im using TWRP recovery and had used Utility 1.10 to go back to stock from Energy rom with safestrap recovery.
Can tell me whats the prob? Is it the kernel problem?
Have you tried upgrading or reflashing TWRP and then doing a clean install of Carbon? Its probably worth doing a fresh download of each first just to make sure you cover all your bases. These reboots were happening to me a few months ago and it drove me mad. following these steps fixed it for me.
jcxmej said:
I updated my phone to latest liquidsmooth rom two days ago and the phone freezes and restarts/reboots randomly like sometimes when im on phone/ playing a game/ using browser/ connected to charger. Yesterday I changed rom to latest carbon rom. Did install (3 wipes) as told in the thread but im still having the reboots.
Im using TWRP recovery and had used Utility 1.10 to go back to stock from Energy rom with safestrap recovery.
Can tell me whats the prob? Is it the kernel problem?
Click to expand...
Click to collapse
Honestly, if you're using SafeStrap, that might be your problem. Remove SS and flash the ROM in TWRP. If your bootloader is unlocked, you don't really want to use SS. Also, make a stock backup in TWRP, prior to flashing. This way, it will be easier for you to recover in the future, and you won't need to go through the painful process of fastboot.
RikRong said:
Honestly, if you're using SafeStrap, that might be your problem. Remove SS and flash the ROM in TWRP. If your bootloader is unlocked, you don't really want to use SS. Also, make a stock backup in TWRP, prior to flashing. This way, it will be easier for you to recover in the future, and you won't need to go through the painful process of fastboot.
Click to expand...
Click to collapse
Like I said on first post Im using TWRP now. Previously I was using safestrap. I removed it and installed TRWP. Anyways thanks.
PantherVT said:
Have you tried upgrading or reflashing TWRP and then doing a clean install of Carbon? Its probably worth doing a fresh download of each first just to make sure you cover all your bases. These reboots were happening to me a few months ago and it drove me mad. following these steps fixed it for me.
Click to expand...
Click to collapse
Thanks man. I will upgrade TWRP or reinstall it first. Thanks for that tip. Will post again if it doesnt work.
Still having those restarts. Really irritating. Froze and rebooted 4 5 times today morning while I was on call and trying to message. I reflashed reinstalled everything. I used both Utility 1.10 and 1.20. Im getting reboots even the stock ROM after using the Utility. I am confused which Utility I should be using. I had no issue of rebooting before flashing using Utility. Can someone give me exact procedure to reflash so that i know i am not missing out anything.
jcxmej said:
Still having those restarts. Really irritating. Froze and rebooted 4 5 times today morning while I was on call and trying to message. I reflashed reinstalled everything. I used both Utility 1.10 and 1.20. Im getting reboots even the stock ROM after using the Utility. I am confused which Utility I should be using. I had no issue of rebooting before flashing using Utility. Can someone give me exact procedure to reflash so that i know i am not missing out anything.
Click to expand...
Click to collapse
you might need to do a clean install.
- what version of TWRP are you using (anything other than 2.4 should be fine)?
- to perform the clean install, mount system, then try wiping everything (system, factory reset, & internal storage) - DO NOT WIPE external SD (I presume this is where you store the ROM files
- after wiping, reboot recovery, then install whichever 4.2.2 ROM you want follow by the GApps (use the 3/2013 version)
jco23 said:
you might need to do a clean install.
- what version of TWRP are you using (anything other than 2.4 should be fine)?
- to perform the clean install, mount system, then try wiping everything (system, factory reset, & internal storage) - DO NOT WIPE external SD (I presume this is where you store the ROM files
- after wiping, reboot recovery, then install whichever 4.2.2 ROM you want follow by the GApps (use the 3/2013 version)
Click to expand...
Click to collapse
Since TWRP wasnt working for me, I tried flashing with CWM recovery by hashcode. Still had reboots. I was using TWRP 2.3.2.3
When you say wipe everything, does it include 'modem' and 'pds'? Saw these two options also inside Mount/Format menu of CWM recovery.
Also there was an option 'Mount sdcard' (internal I suppose) but when i click it nothing happens it remains as Mount sdcard. Rest of it changes from Mount to Unmount. Is there some problem with that?
Do I have to just Mount system only? Also after rebooting recovery do I have to mount system again?
I try again as you said meanwhile.
jcxmej said:
Since TWRP wasnt working for me, I tried flashing with CWM recovery by hashcode. Still had reboots. I was using TWRP 2.3.2.3
When you say wipe everything, does it include 'modem' and 'pds'? Saw these two options also inside Mount/Format menu of CWM recovery.
Also there was an option 'Mount sdcard' (internal I suppose) but when i click it nothing happens it remains as Mount sdcard. Rest of it changes from Mount to Unmount. Is there some problem with that?
Do I have to just Mount system only? Also after rebooting recovery do I have to mount system again?
I try again as you said meanwhile.
Click to expand...
Click to collapse
nope, just system/factory reset/internal storage.
yes, make sure everything is mounted (checked) so that they read "unmount"
jco23 said:
nope, just system/factory reset/internal storage.
yes, make sure everything is mounted (checked) so that they read "unmount"
Click to expand...
Click to collapse
Did exactly like said. Got into CWM recovery. Mounted system. Formatted system, data, cache, sdcard. Did factory reset and wiped the caches. Then rebooted recovery. Then installed the ROM, 3/13 gapps, gsm fix. Reboot system. Still no use. I got 2 reboots in 5 mins in the ROM. I checked the md5 of the files and its ok. Dont know what else to try?
jcxmej said:
Did exactly like said. Got into CWM recovery. Mounted system. Formatted system, data, cache, sdcard. Did factory reset and wiped the caches. Then rebooted recovery. Then installed the ROM, 3/13 gapps, gsm fix. Reboot system. Still no use. I got 2 reboots in 5 mins in the ROM. I checked the md5 of the files and its ok. Dont know what else to try?
Click to expand...
Click to collapse
which ROM are you trying to install?
jco23 said:
which ROM are you trying to install?
Click to expand...
Click to collapse
LiquidSmooth v2.9 by DHacker29
http://forum.xda-developers.com/showthread.php?t=2373703
I have also tried Carbon ROM but was having reboots with that too. I liked liquidsmooth better so trying to make this work.
jcxmej said:
LiquidSmooth v2.9 by DHacker29
http://forum.xda-developers.com/showthread.php?t=2373703
I have also tried Carbon ROM but was having reboots with that too. I liked liquidsmooth better so trying to make this work.
Click to expand...
Click to collapse
are you flashing a kernel at the same time?
I would recommend trying a basic 4.2.2 ROM right now - like unoffical AOKP.
another problem could be the GApps or GSM fix. try installing just the ROM without the GApps perhaps?
carbon was very solid too. unfortunately, I can't help you with the GSM fix, as I am CDMA.
jco23 said:
are you flashing a kernel at the same time?
I would recommend trying a basic 4.2.2 ROM right now - like unoffical AOKP.
another problem could be the GApps or GSM fix. try installing just the ROM without the GApps perhaps?
carbon was very solid too. unfortunately, I can't help you with the GSM fix, as I am CDMA.
Click to expand...
Click to collapse
Okay i will try but had this reboot issue even with the stock ROM after flashing with Utility 1.20.
jcxmej said:
Okay i will try but had this reboot issue even with the stock ROM after flashing with Utility 1.20.
Click to expand...
Click to collapse
hmm.... not really sure then. perhaps you lost root? try re-installing SuperSU - I'm just grasping at straws here.
someone mentioned a similar issue:
http://forum.xda-developers.com/showthread.php?p=44317692#post44317692
jco23 said:
hmm.... not really sure then. perhaps you lost root? try re-installing SuperSU - I'm just grasping at straws here.
someone mentioned a similar issue:
http://forum.xda-developers.com/showthread.php?p=44317692#post44317692
Click to expand...
Click to collapse
I think I have root access I had no issue with it. Okay maybe I will check the thread you gave. Anyways I tried Eclipse ROM which is based AOKP. Still had reboots. So I switched back to liquid. Anyways Im gonna keep trying the basics. If anyone has any suggestions I could try its welcome.
PS. Should I flash another kernel with the ROM just in case ? I have been only installing ROM and gapps only till now.
jcxmej said:
I think I have root access I had no issue with it. Okay maybe I will check the thread you gave. Anyways I tried Eclipse ROM which is based AOKP. Still had reboots. So I switched back to liquid. Anyways Im gonna keep trying the basics. If anyone has any suggestions I could try its welcome.
PS. Should I flash another kernel with the ROM just in case ? I have been only installing ROM and gapps only till now.
Click to expand...
Click to collapse
I don't think changing the kernel will do it.... I suspect the issue is with your recoveries - will respond in other thread....
This isn't my very first time with flashing/rooting/etc. but I'm not that adept with it.
Got my S4 2 days ago but managed to get time today to work on it. I rooted successfully and everything was running perfect. I flashed over the newest Beanstalk ROM w/ gapps and it ran fine the first time it ran.
I can't get passed the Samsung Galaxy S4 boot logo every time I try to reboot the phone though...
If I wipe the cache/dalvik and reflash it still doesn't boot passed logo.
If I wipe the cache/dalvik and then wipe data (including the internal SD card, completely wiping it clean), flashing the ROM will work the first time it runs; once I reboot or just power it off then power it back on, stuck at Galaxy S4 logo... I let the ROM run first time through, input only what is needed to get to the home screen (google account/wifi setup/phone name/etc.), then I've tried rebooting it, shutting it down and powering it back up, letting everything update and waiting half an hour and restarting it... all have the same result, stuck at boot logo
I'm using TWRP, I have a recovery for stock but I don't want to use stock.
If anyone can help me out I'd appreciate it.
Try flashing a different compatible kernel.
ObrienDave said:
Try flashing a different compatible kernel.
Click to expand...
Click to collapse
This is EXACTLY what I was about to try... I'm literally reflashing the ROM fresh right now, going to put the kernel on the SD card, then reboot into recovery and wiping cache then flashing the kernel.
Will using a recovery that was made on a different kernel have any effect if I decide to use the recovery? I've heard bad things about flashing the wrong kernel (even though I know the one I'm about to use is the correct one) and really screwing stuff up if not done properly. I just want to make sure I don't screw anything up permanently.
Thanks.
Spazzzin said:
This is EXACTLY what I was about to try... I'm literally reflashing the ROM fresh right now, going to put the kernel on the SD card, then reboot into recovery and wiping cache then flashing the kernel.
Will using a recovery that was made on a different kernel have any effect if I decide to use the recovery? I've heard bad things about flashing the wrong kernel (even though I know the one I'm about to use is the correct one) and really screwing stuff up if not done properly. I just want to make sure I don't screw anything up permanently.
Thanks.
Click to expand...
Click to collapse
Use twrp 2.5.0.2 because if your using 2.6 its bringing problems. Also report this to their thread for better help
Sent from my SPH-L720 using xda app-developers app
Since there are no recovery categories according to this page,
http://forum.xda-developers.com/showthread.php?t=2303917
I don't see where it would matter. No guarantees though.
I do know it is ESSENTIAL to match the type (TW or AOSP) ROM and kernel to avoid major problems.
I also recommend TWRP 2.5.0.2
D/L TWRP from here:
http://techerrata.com/browse/twrp2/jfltespr
ObrienDave said:
Since there are no recovery categories according to this page,
http://forum.xda-developers.com/showthread.php?t=2303917
I don't see where it would matter. No guarantees though.
I do know it is ESSENTIAL to match the type (TW or AOSP) ROM and kernel to avoid major problems.
I also recommend TWRP 2.5.0.2
D/L TWRP from here:
http://techerrata.com/browse/twrp2/jfltespr
Click to expand...
Click to collapse
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Spazzzin said:
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Click to expand...
Click to collapse
Flashing a different kernel didn't do anything, I still keep getting stuck at the boot logo :/
Spazzzin said:
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Click to expand...
Click to collapse
Just flash it by odin by the link provided above. Make sure to use the tar file v 2.5.0.2
Sent from my SPH-L720 using xda app-developers app
---------- Post added at 09:22 PM ---------- Previous post was at 09:19 PM ----------
Spazzzin said:
Flashing a different kernel didn't do anything, I still keep getting stuck at the boot logo :/
Click to expand...
Click to collapse
By the way can you provide the steps and which files you flashing. Also redownload everything could be a bad download. Make sure to download them in computer and transfer them to your sd card
Sent from my SPH-L720 using xda app-developers app
I did a fresh install of the LiquidSmooth ROM and it's not hanging at boot logo whenever I reboot, and everything is working well. I suppose I'll stick with this for a while.
For my steps trying Beanstalk:
Boot into recovery (TWRP 2.6.0.0)
Factory reset;wipe cache/dalvik
Format Data
Factory reset;wipe cache/dalvik
Install ROM + Gapps
Wipe cache/dalvik
Reboot
I then tried doing that exact process, after letting it boot once I rebooted into recovery and flashed KT Kernel and wiped then rebooted and it hung at boot logo.
I did it again but I installed ROM + Gapps + Kernel then wiped then rebooted and it still hung at boot logo.
I'll download and prepare a new install of Beanstalk and give it another try tomorrow. I'll make sure to backup Liquid in case I want to switch back.
Thanks again for the help!
Glad it's working out for you.
If I may ask here; how do I know if a certain kernel is compatible with a ROM? I know to match the version (4.2, 4.3. etc,) and base (AOSP/ TW) but is there anything else specific that I need to watch out for that could cause problems with flashing a kernel on a ROM?
Spazzzin said:
If I may ask here; how do I know if a certain kernel is compatible with a ROM? I know to match the version (4.2, 4.3. etc,) and base (AOSP/ TW) but is there anything else specific that I need to watch out for that could cause problems with flashing a kernel on a ROM?
Click to expand...
Click to collapse
Not really unless the rom dev for some reason doesn't recommend using a certain one. Kernels will act differently for everyone even on the same device with the same rom. Just need to flash them and find out which one works the best for you (battery life, overheating, smoothness, etc).
Always have a backup handy just in case something doesn't work right.