UI still runs super smooth at 128MHz, so will setting it to this have any major positive effect on battery life? If not playing games I'm guessing u won't really need all that GPU power.
Sent from my Nexus 4 using xda app-developers app
bump
Well, in technical terms it *should* give you better battery life because it's reducing stress on a main hardware component so it doesn't have to work as hard (the harder it works, the more battery it takes). Same thing with the screen; the lower the brightness, the better the battery.
Sent from my Nexus 4 using xda premium
What app allow you to change GPU speed?
Sent from XDA app
eksasol said:
What app allow you to change GPU speed?
Sent from XDA app
Click to expand...
Click to collapse
I know faux123's kernel app let's you.
Sent from my Nexus 4 using xda premium
android88 said:
Well, in technical terms it *should* give you better battery life because it's reducing stress on a main hardware component so it doesn't have to work as hard (the harder it works, the more battery it takes). Same thing with the screen; the lower the brightness, the better the battery.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Wouldn't it have to work harder for longer because it can't do anything as fast? It isn't like if you set the GPU clock to 487mhz it runs at 487mhz all the time, so ramping up to 487mhz would allow it to finish whatever it is doing faster wouldn't it?
Sent from my Nexus 4 using Tapatalk 2
joshnichols189 said:
Wouldn't it have to work harder for longer because it can't do anything as fast? It isn't like if you set the GPU clock to 487mhz it runs at 487mhz all the time, so ramping up to 487mhz would allow it to finish whatever it is doing faster wouldn't it?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Then wouldn't it be the same with the CPU? When I answered I was thinking like how a CPU would work. I understand your thinking though.
Sent from my Nexus 4 using xda premium
Well I would like to add that the 540 sgx can power the 720P in the Galaxy Nexus... That dino is significantly weaker than the Adreno 320 even over clocked. I run 128 only and it works fine for games and even HD videos(YouTube). To confirm I tried Most wanted, dead trigger, temple run, riptide,etc and there weren't any issues(also toggled vSync). And if you use benchmarks like Epic cidel or antutu you'll see the frames are still pretty high.
So I'll say that 128 or even 200mhz is sufficient for this GPU and most purposes. However a good I/o scheduler and governor are still recommended.
Sent from my Nexus 4 using xda app-developers app
I think another advantage if it runs what you want at a good frame rate is less heat.
Related
Hi all,
I am using a rooted n7.
I have over clocked my galaxy s2 to 1.5ghz before, but I am not sure what is a safe level to over clock the n7 to.
What is a is is for battery life and performance?
And which kernel do u guys recommend
?
Thanks in advance
Cheers
Corey
Sent from my GT-I9100 using xda premium
fishingfon said:
Hi all,
I am using a rooted n7.
I have over clocked my galaxy s2 to 1.5ghz before, but I am not sure what is a safe level to over clock the n7 to.
What is a is is for battery life and performance?
And which kernel do u guys recommend
?
Thanks in advance
Cheers
Corey
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I run trinity kernel on my Gnex and N7 and on my N7 I keep it stock speeds because I've seen no reason to realistically OC it. Most of the improvements I see are from the kernel software changes over stock. You can OC to 1.6 safely but I'm not sure of the power usage difference but I'm pretty sure the loss in power isn't worth the gain from OCing.
Sent from my Galaxy Nexus using xda app-developers app
I have mine at 1.6 just for the hell of it, I get a good 4 or 5 hours of continuous usage out of it.
brando56894 said:
I have mine at 1.6 just for the hell of it, I get a good 4 or 5 hours of continuous usage out of it.
Click to expand...
Click to collapse
For the benefit of the community, can you tell us any major changes at 1.6 GHz?
Is there anything noticeably faster?
Hi, I have a related question but can't post since I'm new.
Using the glazed rom which i like but it apparently has gpu overclock. I would like to know how to adjust that back to stock setting or at least see what it currently is. I found the CPU section but there is no gpu I can see.
Is there a tool I can use?
Sorry for the hijack...at least its sort of on topic
IMO over clocking is a gimmick, its the kernel build
Sent from my Nexus 7 using xda app-developers app
Harry GT-S5830 said:
IMO over clocking is a gimmick, its the kernel build
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
My thoughts exactly. I play some light games and web browse on my Nexus 7.
For those purposes, my Nexus 7 is already extremely fast, so I don't think I would be able to notice if it was over clocked.
But I guess it depends, maybe there's a big difference when running GPU heavy games.
I have OC mine upto 1640 MHz for bench marking alone for half and hour or probably more and it went fine although the tablet was getting warmer more than usual.
Sent from my Nexus 7 using xda premium
Hi,
I decided to flash trinity kernel.
I am currently OC to 1.5yghz, is that a safe level to keep it at full time? Or can that burn the cpu out?
Thanks again
Cheers
Corey
Edit,
I over clocked my galaxy s2 ages ago, and I noticed a huge difference in performance.
So that is why I want to over clock my n7 too lol
Corey
Sent from my GT-I9100 using xda premium
there is no such thing as a safe overclock. overclocking, by nature, carries some risk. that said, i havent seen anyone brick their device from overclocking.
fishingfon said:
Hi all,
I am using a rooted n7.
I have over clocked my galaxy s2 to 1.5ghz before, but I am not sure what is a safe level to over clock the n7 to.
What is a is is for battery life and performance?
And which kernel do u guys recommend
?
Thanks in advance
Cheers
Corey
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Just wondering
Why do you feel the need to OC?
I go to 1.6 but use the Trinity App to go back to stock when OC not needed
Sent from my GT-I9300 using xda app-developers app
I have not over clocked the Nexus 7 yet but one way to test your devices max is to use setcpu. Make sure you do not have "set on boot" option selected. Then step up your cpu. If your cpu can not handle the over clock it will force restart. If you do not have the set at boot selected it will revert back to the last good state on restart.
Each device is different on what it can handle for over clock.
Sent from my Nexus 7 using xda app-developers app
fishingfon said:
Hi,
I decided to flash trinity kernel.
I am currently OC to 1.5yghz, is that a safe level to keep it at full time? Or can that burn the cpu out?
Click to expand...
Click to collapse
To be honest I doubt you'll notice much increase from oc the CPU since the CPU already is so powerful nothing pushes it to max really.
Only thing worth overclocking is GPU really. And at that, your not going to notice a difference unless your playing some intense games.
Hey guys, touch booster is really annoying on this phone. It pushes the phone to 1.06GHz everytime I touch it, and is starting to bug me.
Is there anyway to keep it scaling up properly?
I'm no expert at this stuff, but isn't this fast jump in CPU clock what pretty much makes Project Butter possible?
If I understand right (and I probably don't), I think this might have to do with with governor in-use. If your rooted; try using a different governor and then touching the screen.
Great, so now people are complaining about Project Butter's features... ok
How exactly does something like this bug you?
People are getting way too picky with this phone now. Relax, its a phone guys
Sent from my E4GT by using THE FORCE
Next thread will be " This phone is too fast, how do I slow it down to keep up?"
Sent from my Nexus 4 using xda premium
The CPU goes up when you touch it so it can be responsive and quick to your inputs. How is this so annoying?
If you root it you can lower the max or change the governor buy chances are you will lose much of your responsiveness.
I understand that it is good for us to discuss issues and problems but some of the things I am seeing here are just really nit picking and complaining about things that are not bad at all. We are a spoiled society of humans, some more than others i guess.
sent via xda premium with nexus 7
Monk4Life said:
Next thread will be " This phone is too fast, how do I slow it down to keep up?"
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
you joke but there's a surprising amount of people that underclock their cpu thinking it will save battery...
qwahchees said:
Hey guys, touch booster is really annoying on this phone. It pushes the phone to 1.06GHz everytime I touch it, and is starting to bug me.
Is there anyway to keep it scaling up properly?
Click to expand...
Click to collapse
Get some CPU control app and change the minimum frequency from 1GHz to 384MHz.
/thread
neotekz said:
you joke but there's a surprising amount of people that underclock their cpu thinking it will save battery...
Click to expand...
Click to collapse
Under clocking will save battery in most cases but ot will also make your phone sluggish and slow depending on how much.
sent via xda premium with nexus 7
---------- Post added at 12:07 AM ---------- Previous post was at 12:05 AM ----------
richteralan said:
Get some CPU control app and change the minimum frequency from 1GHz to 384MHz.
/thread
Click to expand...
Click to collapse
That will make your phone run so slow and crappy... Why have a decent cpu if the plan is to chop it? This defeats the entire purpose of having a 1.5ghz clock speed..
sent via xda premium with nexus 7
Richieboy67 said:
That will make your phone run so slow and crappy... Why have a decent cpu if the plan is to chop it? This defeats the entire purpose of having a 1.5ghz clock speed..
sent via xda premium with nexus 7
Click to expand...
Click to collapse
You have no idea what you are talking about.
Check the meaning of "MINIMUM CPU FREQUENCY".
P.S. O and btw I'm changed it to 384MHz on my Nexus 4. AND........wait for it........my nexus 4 is not slow and crappy........woo mind blown!
What I find interesting is on the nexus 4 the governor is on demand , and the scaling range is 0mhz- 1026mhz ( you can check using CPU spy +)
However on the nexus 10 , the governor is interactive and the scaling range is 0mhz -200mhz
I wonder why that is
Sent from my Nexus 10 using Tapatalk 2
italia0101 said:
What I find interesting is on the nexus 4 the governor is on demand , and the scaling range is 0mhz- 1026mhz ( you can check using CPU spy +)
However on the nexus 10 , the governor is interactive and the scaling range is 0mhz -200mhz
I wonder why that is
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
that app is broken.
Try No-frills CPU control, or even AnTuTu CPU Master.
Is it interactive on the nexus 4 then? I just checked on my n10 smd it still says interactive
Sent from my Nexus 10 using Tapatalk 2
italia0101 said:
Is it interactive on the nexus 4 then? I just checked on my n10 smd it still says interactive
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
I'm using no-frills and the default is ondemand, scaling from 1GHz to 1.5GHz.
What I changed is only the minimum frequency from 1GHz to 384MHz. Nothing more.
The scaling...
Sent from my Nexus 4 using XDA Premium HD app
richteralan said:
I'm using no-frills and the default is ondemand, scaling from 1GHz to 1.5GHz.
What I changed is only the minimum frequency from 1GHz to 384MHz. Nothing more.
Click to expand...
Click to collapse
Yea that's cool I get that . I just wonder why the governor is different on the nexus 10
Sent from my Nexus 4 using Tapatalk 2
italia0101 said:
Yea that's cool I get that . I just wonder why the governor is different on the nexus 10
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Ask Google.
I have no idea. And I don't have a Nexus 10.
italia0101 said:
Yea that's cool I get that . I just wonder why the governor is different on the nexus 10
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Nexus 10 is a dual core tablet, not a phone. Check your PC some time or laptop. They scale totally differently than a phone does.
sent via xda premium with nexus 7
My nexus 7 keeps under clicking itself to 1.5GHz from anything.
I have stock rooted with Trinity kernel 4.2 using tkt to over clock anyone have any tips
Sent from my Nexus 7 using xda app-developers app
maxjivi05 said:
My nexus 7 keeps under clicking itself to 1.5GHz from anything.
I have stock rooted with Trinity kernel 4.2 using tkt to over clock anyone have any tips
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
It's called 'saving power'.
As long as it doesn't lag and clocks itself up to maximum when required, there's nothing to worry about.
Or you can get some CPU clock app and set it on maximum performance. But don't be surprised if you can boil eggs on it then and the battery dies in 2 hrs :good:
issak42 said:
It's called 'saving power'.
As long as it doesn't lag and clocks itself up to maximum when required, there's nothing to worry about.
Or you can get some CPU clock app and set it on maximum performance. But don't be surprised if you can boil eggs on it then and the battery dies in 2 hrs :good:
Click to expand...
Click to collapse
I ran my N7 at 1.7 (using Trinity) without any heating problems. Battery life was acceptable.
Sent from my Nexus 7 using xda premium
Found out it was power Hal script I ran fixed now!
--
NVM removed it now it Underclocks to normal 1.3 GHz from any Freq!!! Why....
Sent from my Nexus 7 using xda app-developers app
maxjivi05 said:
Found out it was power Hal script I ran fixed now!
--
NVM removed it now it Underclocks to normal 1.3 GHz from any Freq!!! Why....
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
clear the data for tkt and reboot. if you are using tkt, you dont need a powerhal script, since tkt runs it automatically after opening it.
Does Tegra 3 really need overclocked? Having used Tegra 2 I can say that could definitely use a little bump but so far T3 is keeping up with me and I can see a big difference between T2 and T3. Makes me wonder what T4 Wayne has in store.
edge929 said:
Does Tegra 3 really need overclocked? Having used Tegra 2 I can say that could definitely use a little bump but so far T3 is keeping up with me and I can see a big difference between T2 and T3. Makes me wonder what T4 Wayne has in store.
Click to expand...
Click to collapse
does it need it.. probably not. do we want to overclock anyways.. yes! btw, its underclocked by default(its rated to 1.5ghz). i use it at 1150mhz as a daily btw.
Okay let me start by saying I upgraded from a galaxy s4 (Verizon). So it has the SD 600 and adreno 320. Okay, great. But now I have the SD 800 with adreno 330 GPU and I swear there is so much more lag on the 330. GTA vc is unplayable at max settings (getting about 5-10 fps) where I was getting 20-25 fps on the s4. So my question is why the large performance drop if they have the same resolution display but my g2 supposedly has a faster chip all around?
Sent from my VS980 4G using xda app-developers app
Anyone? I need to know if I need to exchange it
Sent from my VS980 4G using xda app-developers app
It could be that things need to be optimized for the higher end Krait 400 cores and Adreno 330. Or maybe it is a driver issue. IDK.
Or, has anyone benched the storage performance on this phone? Maybe it suffers a fatal flaw of slow I/O
kake said:
Anyone? I need to know if I need to exchange it
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
EniGmA1987 said:
It could be that things need to be optimized for the higher end Krait 400 cores and Adreno 330. Or maybe it is a driver issue. IDK.
Or, has anyone benched the storage performance on this phone? Maybe it suffers a fatal flaw of slow I/O
Click to expand...
Click to collapse
I have benched the storage performance and it scores very high. It could very well be an optimization issue, i've played GTA VC on my nexus 10 with no noticeably low framerates... Honestly not sure what the problem is there. Definitely shouldn't be that low.
Do should I exchange it you think?
Sent from my VS980 4G using xda app-developers app
Are there truly any games that are out or upcoming that make use of the power in this phone? I'd like to see what it's capable of other than killing benchmarks
LG G2
kake said:
Do should I exchange it you think?
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
I am going to try and check some tuning options tonight to see if I can resolve stuttering issues in the games I play. I am wondering if it is simply how LG tuned their governor, since it looks to be using a custom version of OnDemand. The stutter *might* happen when a core turns on or off, or it could be simply how LG tuned their governor for better battery.
Ive been getting smoother results underclocking the G2 at either 1.7 or 1.9 and knock on seems more quick to response, but when I tried video recording the 60 fps isn't smooth when you are clocked at the regular speed.. beware...I ran a benchmark on quadrant standard and got 17,250 constantly so it is underclocked per core... I want to hear your opinion on this and do you plan to underclock or already are. I feel like the ability to be more smooth within the UI helps a lot more now..let me know your thoughts!
bencozzy said:
From using trickster mod and setcpu to underclock they only underclock cpu0 the other three still use the full frequency range.
What app are you using?
Click to expand...
Click to collapse
No frills CPU control :0
At 1.9 my Antutu was the same add the One and oddly the graphics test dropped 15-20 frames even though we are not under clocking the GPU.
Sent from my VS980 4G using XDA Premium 4 mobile app
That's really odd tbh o.o did you try quadrent as well? :0
jrgilbert79 said:
At 1.9 my Antutu was the same add the One and oddly the graphics test dropped 15-20 frames even though we are not under clocking the GPU.
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I got way higher even at 1.7ghz :0
jrgilbert79 said:
At 1.9 my Antutu was the same add the One and oddly the graphics test dropped 15-20 frames even though we are not under clocking the GPU.
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
HeXaLox said:
I got way higher even at 1.7ghz :0
Click to expand...
Click to collapse
You're saying that by underclocking, you're getting a smoother UI but lower benchmarks?
No i got a higher benchmark than the guy who replied on my post. I did get a smoother UI and everything is less laggy. Ill post a pic of 2.3ghz idk if its actually at 1.7ghz or 2.3ghz ill do another test
whittikins said:
You're saying that by underclocking, you're getting a smoother UI but lower benchmarks?
Click to expand...
Click to collapse
All this is true. Just tried. It might be a TINY bit slower ui THOUGH
Sent from my LG-D800 using Tapatalk 4
What settings did toy use? Deadline? Noop? Interactive gov?
Sent from my VS980 4G using XDA Premium 4 mobile app
I am using the app called No-frills CPU Control and for 1.7ghz I am using row and Ondemand as the I/O governor and same settings for the regular clock as well..
jrgilbert79 said:
What settings did toy use? Deadline? Noop? Interactive gov?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Underclocked at 1.7ghz first then regular clock at 2.27ghz
jrgilbert79 said:
What settings did toy use? Deadline? Noop? Interactive gov?
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am tending to believe that the regular clock speed is actually overclocked...just like how the galaxy s4 is overclocked 200mhz more than normal...however I could be wrong..
If you really want to see if this odd issue is actually happening download an app called Multicore CPU Control (the only app of its kind that seems to work with the LG G2). I use this to save battery by turning off all but one core, but it allows you full control over all your cores.
Download it, create a profile, and set each core to what you want. I had to save the profile first, then go back in to edit the latter 3 cores' frequencies.
I would suggest setting the min and max to the same and choosing Performance for the governor. Use a different app to set the scheduler.
Be sure to have something like Kernel Tuner to ensure that all your cores are running as you intended. If not, go back into Multicore CPU Control and re-save your profile again.
Would love to hear the results afterwards!
I used Multicore CPU Control.
The only way to set clock to CPU 1,2,3 is let them always active. If I leave dynamic for these cores, they still go up to 2,26 GHZ. I think this the reason why HeXaLox have a little decrement when underclock because it only did for one core.