i have tryed to root my device using simple root tool it was going good until i tryed to flas cm10 and it got stuck in a bootloop and wen i try to restore it to my backup and said invaled argumeny e: cant mount /data please help willing to do anythng to heelp out ith this proccess:good:
jumanjier said:
i have tryed to root my device using simple root tool it was going good until i tryed to flas cm10 and it got stuck in a bootloop and wen i try to restore it to my backup and said invaled argumeny e: cant mount /data please help willing to do anythng to heelp out ith this proccess:good:
Click to expand...
Click to collapse
I appreciate the pm but I know nothing about the a200 suggest u go here
Sent from my A500 using Tapatalk 2
Related
I tried to upgrade to ext4 from viperom 4.0. I booted into recovery and installed the flashable zip ext4 file found here i was using clockworkdmod recovery version 2.5.1.0. Everytime i try to boot my phone it stays at samsung. i cannot do a nandroid restore. It gives me an error (sd-ext.img not found. Skipping restore of /sd-ext/.)
anyway to fix this without having to unroot?
P.S. i dont have app2sd partition anymore (i dont know is this information helps)
yungdizz said:
I tried to upgrade to ext4 from viperom 4.0. I booted into recovery and installed the flashable zip ext4 file found here i was using clockworkdmod recovery version 2.5.1.0. Everytime i try to boot my phone it stays at samsung. i cannot do a nandroid restore. It gives me an error (sd-ext.img not found. Skipping restore of /sd-ext/.)
anyway to fix this without having to unroot?
P.S. i dont have app2sd partition anymore (i dont know is this information helps)
Click to expand...
Click to collapse
You are gonna have to odin to stock and start over. Same thing happend to me.
Sent from my SPH-D700 using XDA App
Yea d/l odin and sph-d700-dk28-8g-rel.tar.md5 file. and load sph-d700-dk28-8g-rel.tar.md5 in the PDA and thats it. then make sure u guys follow this guys thread on youtube and litraly follow every single thing he does. your problem is your trying to do the update with wrong clockwork mod. look closer and follow the directions to the "T" dont be lazy hehe good luck it helped my phone allot im happy
thanks you guys...
Please post questions in General section.
Is there a way to flash my ext back?? or do this without a usb cable? cause i lost mine
i tried to wipe date by android recovery system and from then my note cant boot, i cant access clockworkmod but i cant restore from a nadroid backup , its says error while mounting /system... any help???
also on the startup i got a message
applied the csc-code : XEU
Successfully applied mmulti-csc
e:failed to mount /data (Invalid argument)
e:copy_log_files_to_data :: can't mount /data
mesiah said:
i tried to wipe date by android recovery system and from then my note cant boot, i cant access clockworkmod but i cant restore from a nadroid backup , its says error while mounting /system... any help???
also on the startup i got a message
applied the csc-code : XEU
Successfully applied mmulti-csc
e:failed to mount /data (Invalid argument)
e:copy_log_files_to_data :: can't mount /data
Click to expand...
Click to collapse
mesiah, you have the correct nick....you haven´t read about the Hardbrick bug, have u??...You are not supposed to wipe running an ICS kernel...read this:
http://forum.xda-developers.com/showthread.php?t=1633943
try using odin to flash back to stock GB...but if you get stuck in the NAND WRITE part...I have bad news for u.
i tried it but nothing, also i tried to install a rom that i have stored in my sd, it started but it stuck in 57% of the installation... do you have any explain ??``
i tried it again and it stuck on 80%
mesiah said:
i tried it but nothing, also i tried to install a rom that i have stored in my sd, it started but it stuck in 57% of the installation... do you have any explain ??``
i tried it again and it stuck on 80%
Click to expand...
Click to collapse
You are probably hardbricked for wiping in ICS....read the post I sent u.
when i open the device it stucks in samsung logo as i have read in this guide http://forum.xda-developers.com/showthread.php?t=1656635 this is a soft brick as i understand??? i confused ... what options i have???
mesiah said:
when i open the device it stucks in samsung logo as i have read in this guide http://forum.xda-developers.com/showthread.php?t=1656635 this is a soft brick as i understand??? i confused ... what options i have???
Click to expand...
Click to collapse
mesiah...I have already told u...flash a stock GB firmware with ODIN PC....if you get stuck there, then u are hardbricked...
glevitan said:
mesiah...I have already told u...flash a stock GB firmware with ODIN PC....if you get stuck there, then u are hardbricked...
Click to expand...
Click to collapse
can samsung fix it?
mesiah said:
can samsung fix it?
Click to expand...
Click to collapse
If it's hardbrick and you are under warranty, then you will have to use your warranty and they will either replace your phone or give you a new motherboard.
so do you know the cost?? i have one more samsung galaxy note with a dangerous kernel , what i have to do ?
read the stickies in the forum. they really describe the problem in detail.
Clockwork mod wont start and it wont boot! Please help!
EDIT :
I just tried re flashing cwm using the root toolkit but im left at abd what should i do now?
EDIT:
Im in cwm now thats where i need help from!
Edit:
I cant mount /sdcard to get the stock rom back on
EDit:
All problems now solved
Hi all pls dont hate me im a big fan from this forum :laugh:
E: Format_Volume: make_extf4fs failed on /dev/block/mmcblk0p13
I get this error message when I try to do a factory reset with CWM v5.5.0.4
I was trying to install roms after error message
stock rom 2.2f 2.3g
error message failed update
roms oxygen2.2.2 cm-7.1.0-U8800-Geno-en aurora 4.1
The phone is stuck you can only see the logo of huawei without motion
rom 2:02 aurora
I see the aurora logo that moves but nothing happen
I've tried re-partitioning with Geno (official-partition.zip)
but I think that's the wrong partition there repartitioned and reformatted
I think I need someone who could help me
to get to my data partition run again
pls help me i dont want a new paperweight whit cwm :crying:
sorry for my bad englisch :silly:
SimonAndroid said:
Hi all pls dont hate me im a big fan from this forum :laugh:
E: Format_Volume: make_extf4fs failed on /dev/block/mmcblk0p13
I get this error message when I try to do a factory reset with CWM v5.5.0.4
I was trying to install roms after error message
stock rom 2.2f 2.3g
error message failed update
roms oxygen2.2.2 cm-7.1.0-U8800-Geno-en aurora 4.1
The phone is stuck you can only see the logo of huawei without motion
rom 2:02 aurora
I see the aurora logo that moves but nothing happen
I've tried re-partitioning with Geno (official-partition.zip)
but I think that's the wrong partition there repartitioned and reformatted
I think I need someone who could help me
to get to my data partition run again
pls help me i dont want a new paperweight whit cwm :crying:
sorry for my bad englisch :silly:
Click to expand...
Click to collapse
Well, you need to restore the -pro stock files. Try this link.
ty for your fast reply
Somcom3X said:
Well, you need to restore the -pro stock files. Try this link.
Click to expand...
Click to collapse
I've already tried it whit stock rom 2.2 and 2.3 from huawei page but on end i get error message failed update
before this stock roms works fine
I just think it can not be written to the correct partition
the stock rom can not do that, I realized even before this where I worked with 2 android systems I had to repeatedly use the tools of Geno
to install stock roms
(twosys-partition.zip) for install 2 systems
(offical-partition.zip) for 1 sysem like stock rom 2.3
I think there is something wrong with this partition 0p13
Maybe this would help create a new partition
how can I get access, and I do not know what format
Maybe there is a different solution
I am very grateful for any kind of help with my problem
SimonAndroid said:
I've already tried it whit stock rom 2.2 and 2.3 from huawei page but on end i get error message failed update
before this stock roms works fine
I just think it can not be written to the correct partition
the stock rom can not do that, I realized even before this where I worked with 2 android systems I had to repeatedly use the tools of Geno
to install stock roms
(twosys-partition.zip) for install 2 systems
(offical-partition.zip) for 1 sysem like stock rom 2.3
I think there is something wrong with this partition 0p13
Maybe this would help create a new partition
how can I get access, and I do not know what format
Maybe there is a different solution
I am very grateful for any kind of help with my problem
Click to expand...
Click to collapse
Hi
change your memory card and Try these instructions on this link
http://forum.xda-developers.com/showthread.php?t=1816147
My problem is i accidentaly wiped the cache partition in my LG E405 using CWM recovery. When I turn on my phone, it's stocked in the LG screen and it isnt moving.
I tried restoring thru the back up in cwm but but it says "Error While Restoring System.
I tried some advices in the net, wiping dalvik cache, wiping cache partition and then hard reset, but still it doesnt work.
I tried installing the ICS ROm CM9 thru Recovery Mode, but the Installation is aborted, the phone says. It says "assert failed: getprop..error in the zip file somethng like that".
I want to try the KDZ, but I cant download a new ROM from lg-phone-firmware.com, it takes me to tny.cz and I cant find the skip button.
It's really important that this phone is fixed for so many reasons, the main is I'm broke and I dont have a cent in my pocket. I also need for communication.
Please help me. Im desperate already. I know it's my fault because I wasnt careful. I was careless. SOS guys!
How to unbrick
Please help me. Im desperate already. I know it's my fault because I wasnt careful. I was careless. SOS guys![/QUOTE]
First thing you need to do is download CWM from developer then Reinstall CWM, (before download CWM Check whether your PC or laptop infected by virus to prevent CWM.zip corrupted)
Using KDZ Updater is the final Choice.
george brown said:
Please help me. Im desperate already. I know it's my fault because I wasnt careful. I was careless. SOS guys!
Click to expand...
Click to collapse
First thing you need to do is download CWM from developer then Reinstall CWM, (before download CWM Check whether your PC or laptop infected by virus to prevent CWM.zip corrupted)
Using KDZ Updater is the final Choice.[/QUOTE]
what do i do after downloading cwm?
kristian.sueta said:
First thing you need to do is download CWM from developer then Reinstall CWM, (before download CWM Check whether your PC or laptop infected by virus to prevent CWM.zip corrupted)
Using KDZ Updater is the final Choice.
Click to expand...
Click to collapse
what do i do after downloading cwm?[/QUOTE]
Sorry for my comment above. You should download and flash KDZ file from here
Search your phone model and select your country.
Sent from my LG P705 using XDA Software