[Q] Need some help with a super glue issue. - Nexus 4 Q&A, Help & Troubleshooting

Well by error i get super glue over my phone, but at least is just a little and only over the metallic bezel, now i've searched about how to remove that and in almost sites said that the best thing is to use "acetone" or the thing to remove nail polish that has acetone, but acetone can damage some surface like plastic, so everyone know if the bezel is true metal? If you have any better ideas hope you can help me! I'll try to get some pictures..

Hi
rskyline said:
Well by error i get super glue over my phone, but at least is just a little and only over the metallic bezel, now i've searched about how to remove that and in almost sites said that the best thing is to use "acetone" or the thing to remove nail polish that has acetone, but acetone can damage some surface like plastic, so everyone know if the bezel is true metal? If you have any better ideas hope you can help me! I'll try to get some pictures..
Click to expand...
Click to collapse
I wouldn't use acetone, that will cause more damage.
Simply leave it, the action of touching it and usin the phone should remove it. To speed things up, when you clean your screen use a microfibre cloth slightly dampened with a soap solution (some washing up liquid and water) and make sure you clean the area with the super glue, it will disappear given a bit of time. However it may leave behind some marks in the chrome effect, but hopefully not.
Regards
Phil

Try to "peel" it off. It should go eventually.
If you want to use acetone put a veeeery small amount on an cotton bud and try to minimize the exposure of the phone to it. Just gently wipe the super glue affected area. Also have a clean cloth at hand. One the super glue has softened, wipe it clean fast

drbrainsol said:
Try to "peel" it off. It should go eventually.
If you want to use acetone put a veeeery small amount on an cotton bud and try to minimize the exposure of the phone to it. Just gently wipe the super glue affected area. Also have a clean cloth at hand. One the super glue has softened, wipe it clean fast
Click to expand...
Click to collapse
I think about exactly the same you stated, but i was waiting that someone can help me out here. Btw do you guys think that even on that metalic bezel, acetone could damage it?

Superglue will wear off. Pick it at it with your fingernail for a few days. Seriously.

estallings15 said:
Superglue will wear off. Pick it at it with your fingernail for a few days. Seriously.
Click to expand...
Click to collapse
The thing is that i use it with a Case lol, so is better to have it naked that my fingers get it off by normal use?

rskyline said:
The thing is that i use it with a Case lol, so is better to have it naked that my fingers get it off by normal use?
Click to expand...
Click to collapse
Take off the case at home?

Related

Best way to clean HD2 screen?

Whats the best way to clean the hd2 screen? Is spraying a bit of window cleaner safe?
I use my forearm, it's nice and hairy and makes it look brand new
A clean dry cloth does the job, no need to use product and I would avoid water anyways... Just rub it with a clean dry cloth and watch the screen shine like the day you unboxed it
I wouldn't spray anything on the screen; I use a "Spontex" microfibre glass cleaning cloth. It's very soft and buffs up the screen in seconds leaving no fibres behind. They cost about three quid in tescos and also do my specs!
I use the inside of my t-shirt lol... or if its a bit greasy from the side of my face I'll breathe on the screen first to give it a tiny bit of moisture and then use the inside of my t-shirt... works very well
I rub it on my trousers, shirt, jumper, t-shirt, boxers... whatever's easiest at the time. I do have a glasses cleaner at my computer desk and tend to use that when I'm sat there. That gets great results.
Plus 1 for the micro fibre cloths. Absolutely amazing results, albeit they feel a bit strange in your hands (the micro fibre cloths, that is).
WB
Never use liquids to clean the screen as it may intrude around the edge (a strong breath is best)
The screen on the HD2 is very duarble so the inside of a Tshirt is excellent and very handy if you are dressed (always make sure there is no grit/sand)
and never to be using scrotum, because to catch hair can be very painfull and maybe also hygene problems
rumpleforeskin said:
Never use liquids to clean the screen as it may intrude around the edge (a strong breath is best)
The screen on the HD2 is very duarble so the inside of a Tshirt is excellent and very handy if you are dressed (always make sure there is no grit/sand)
and never to be using scrotum, because to catch hair can be very painfull and maybe also hygene problems
Click to expand...
Click to collapse
Thanks for that. I will stop...
I use lens/optical cleaning cloth... Makes the screen shine like new ;-)
laserviking said:
I use my forearm, it's nice and hairy and makes it look brand new
Click to expand...
Click to collapse
- You'r Funny
Lol @ laserviking
I dont own a hd2 but i carry a micro fibre cloth that came with my plasma tv i hace the nexus one
Another vote for micro-fibre cloths. I usually use the one I got from Specsavers to clean my glasses with. The advantage of this over clothing is not just that it's softer (and thus guaranteed not to scratch) but that it is far better at absorbing grease, which means the screen ends up completely free from finger-prints. Using your shirt tends to spread the grease around rather than removing it.
I use the screen cleaning cloth that came with my laptop (Fujitsu Siemens Amilo Xi 3650).
It is amazing and fast, I clean the screen in 4-5 seconds and it looks new and shiny
P.S. Do not use any cleaning products or water, just a dry cloth.
hey guys after cleaning my screen with a watery sheet for glasses and not the for the first time - I got a strange problem:
my fingers don´t slide smooth anymore on the screen, it feels like they are braking and slowed down because of this dry screen.also doing multitouch zooming one handed is a problem now!
would be gratefull for any tips!
murderdollpf said:
hey guys after cleaning my screen with a watery sheet for glasses and not the for the first time - I got a strange problem:
my fingers don´t slide smooth anymore on the screen, it feels like they are braking and slowed down because of this dry screen.also doing multitouch zooming one handed is a problem now!
would be gratefull for any tips!
Click to expand...
Click to collapse
The effect will wear off after you use the phone for a little while, it's probably the substance is creating a dry effect lool. And I recommend micro-fibre cleaning cloths, your shiny HD2 will catch everyone's eye in the market!
Oh wait, don't get mugged though Spraying some window cleaning liquid might go into the device through the gaps at the side or through the hardware buttons, causing unwanted problems. Good luck cleaning xD
1. get a shirt
2. rub your HD2 on it
3. ????
4. profit!
after i got my hd2 i used a screen protector to avoid scratches and i clean it so easy just rubbing it in my shirt and thats it, but guys how to clean the edges and the speaker and buttons parts ?
all this method of cleaning the screen is with consideration that u guys have a screen protector on right?
other then the microfiber method, all other method is scratch inducing and sooner or later a scratch will appear on the screen..
laserviking said:
I use my forearm, it's nice and hairy and makes it look brand new
Click to expand...
Click to collapse
amazing!!!
*tries*

zaggfoam anyone???

http://www.zagg.com/j/newsletter/zaggfoam_40promo.php?intcmp=email
i dont think so........
wow I want some lol wouldn't let it go near my nexus though.. Anyone tried it on anything?
Its alcohol based and water free so it can't cause shorts, the only damage a cleaner is likely to do
whats the point when your phone will get dirty the next time you unlock the screen or answer the phone when it place on your face? marketing gimmick at it's finest!
xxlikquidxx said:
whats the point when your phone will get dirty the next time you unlock the screen or answer the phone when it place on your face? marketing gimmick at it's finest!
Click to expand...
Click to collapse
Uh... actually dirt and oils build up on devices after prolonged use. Wiping off the phone doesn't take everything off. Using the foam cleaner would take off all the buildup that results from use.
I'd use it...then just wipe it off regularly and use the foam once a month or so to disinfect and take off the grime buildup. Not sure about dropping $20 on it though.
Sounds good...I like my N1 clean & shiny!
I've heard you can just put a few drops of rubbing alcohol on your phone and rub till it dries for 1/100000000th of the price....
Paul22000 said:
I've heard you can just put a few drops of rubbing alcohol on your phone and rub till it dries for 1/100000000th of the price....
Click to expand...
Click to collapse
I bought an adjustable spray bottle... the type with the screw nozzle to adjust from a stream to a mist. A FINE mist of alcohol works great... but foam is nifty. Anyway, I started doing that after trying Pledge for Electronics. It's obvious it's mostly alcohol.

How do you clean your nexus?

I was just curious how you guys keep your nexus clean, How you keep the screen and trackball looking like new. I just use a damp washcloth on the screen and for the trackball... well i haven't really cleaned the trackball much (probably something i need to start doing before it starts to stick)
Thanks
For the screen I use the typical cloth used for glasses. I haven't cleaned my trackball and it's pretty good looking. I'm a heavy trackball user.
put it inside the washer machine a quarter water full, add a teaspoon of detergent, 2 teaspoons of alcohol, and give it a two minutes cycle. Important, don't forget to seat it up on AIRPLANE MODE or it may get bricked. Do this once or twice a month.
Same way I do for all my electronics:
Mixture of 98% isopropyl alcohol and water in a small sprayer. Mist and then wipe with a microfiber cloth. Of course you don't want to soak it, and try to avoid openings. But the good thing is that the alcohol not only evaporates fast it disinfects!
Quick wipe on the sleeve of what I'm wearing usually suffices, but I give it a going over with an optical wipe once in a while too.
i steam mine with the vegetables every dinner.
Powerwasher.
I have one powered by a 6.5 Honda engine. I have to use the wimpy nozzle though, because the more powerful ones push soggy dust under the digitizer.
pongalong said:
But the good thing is that the alcohol not only evaporates fast it disinfects!
Click to expand...
Click to collapse
That's a myth, actually. Alcohol doesn't disinfect terribly well at all. If you want to disinfect, bleach will do a far better job. However, bleach won't flash off surfaces like alcohol will.
I just wipe it on my jeans...The thing is durable.... not fine china
Lick it with my tongue. And use shirt. Works great
temperbad said:
Lick it with my tongue. And use shirt. Works great
Click to expand...
Click to collapse
Eewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
Just wipe it vigourously on my shirt of pants, that usually leaves the screen smudge free
attn1 said:
That's a myth, actually. Alcohol doesn't disinfect terribly well at all. If you want to disinfect, bleach will do a far better job. However, bleach won't flash off surfaces like alcohol will.
Click to expand...
Click to collapse
Alcohols, usually ethanol or isopropanol, are sometimes used as a disinfectant, but more often as an antiseptic (the distinction being that alcohol tends to be used on living tissue rather than nonliving surfaces). They are non-corrosive, but can be a fire hazard. They also have limited residual activity due to evaporation, which results in brief contact times unless the surface is submerged, and have a limited activity in the presence of organic material. Alcohols are most effective when combined with purified water to facilitate diffusion through the cell membrane; 100% alcohol typically denatures only external membrane proteins. A mixture of 70% ethanol or isopropanol diluted in water is effective against a wide spectrum of bacteria, though higher concentrations are often needed to disinfect wet surfaces. Additionally, high-concentration mixtures (such as 80% ethanol + 5% isopropanol) are required to effectively inactivate lipid-enveloped viruses (such as HIV, hepatitis B, and hepatitis C).Alcohol is, at best, only partly effective against most non-enveloped viruses (such as hepatitis A), and is not effective against fungal and bacterial spores.
Click to expand...
Click to collapse
From wiki
For cleaning a phone, alcohol will do.
attn1 said:
That's a myth, actually. Alcohol doesn't disinfect terribly well at all. If you want to disinfect, bleach will do a far better job. However, bleach won't flash off surfaces like alcohol will.
Click to expand...
Click to collapse
I work in a biological lab and 70% alcohol is good enough to clean the benches.
OT: I use a moist cloth to wipe the phone and occasionally I use 70% isopropanol wipes.
ap3604 said:
Eewwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
Click to expand...
Click to collapse
Spits good for a lot of things....lol
regularly use compressed air duster to keep it as dust free as possible... (to much lint in pockets ;-P)... and i use diluted alcohol spray and a microfibre cloth to clean the phone...
liam.lah said:
Just wipe it vigourously on my shirt of pants, that usually leaves the screen smudge free
From wiki
For cleaning a phone, alcohol will do.
Click to expand...
Click to collapse
I'll go along with that.
Just sayin' - alcohol in the form it is commonly used for as a disinfectant is not as effective as people think it is. As your link pointed out, viruses tend to be harder to deal with than bateria. I saw a nit so I picked.
Hey, if it's your phone, why not use spit if it works?
temperbad said:
Lick it with my tongue.
Click to expand...
Click to collapse
As opposed to licking it with your ring-piece?
My girl friend take her time & lick's it spotless
I was constantly wiping the screen with a micro-fiber cloth (which works very well). However, I just applied a screen protector to my N1 (by Skinomi). I have to say, that the screen protector is much more resistant to smudges. The touch screen response is still the same. I highly recommend it.
my jeans would do the cleaning....

[Q] Think this comes off?

Sorry if there's already a "purple stains on my HD2" but I just ordered this one on ebay and apparently the guy's daughter kept a purple case on it.. this is the result.
I don't wanna screw it up trying to clean it with alcohol but does it look like this could come out? or has anyone else used cases that have caused this?
Just get yourself a nice black case and with time the purple might wear down. I would much rather do that than ruin the rubbery finish it has!? But then again..i guess the choice is yours..my guess would be that it was a case with a custom paint job because there is no reason why the finish should have been coming off.
toreone said:
Just get yourself a nice black case and with time the purple might wear down. I would much rather do that than ruin the rubbery finish it has!? But then again..i guess the choice is yours..my guess would be that it was a case with a custom paint job because there is no reason why the finish should have been coming off.
Click to expand...
Click to collapse
Yeah, I suspect that color is probably actually "Beijing Pink"...classic mark (no pun intended) of a cheap paint job on a cheap case.
I haven't tried alcohol on this phone so I don't know if it'll affect the finish or not. Sometimes you can get that stuff to come up with a pencil eraser, but only in certain situations. Might be worth a try though.
If you can't take it off with an eraser you'll end up buying a cover. If you use alcohol and can't remove it or damage the finish you're still going to end up putting a cover.
I say you just try the alcohol route. If it doesn't come off then that's fine cuz you were going to slap cover on it anyways. I'd try a mr. clean magic eraser sponge, orange citrus cleaner stuff, goo-gone and alcohol being my last resort. Use Q Tips.
Looks like a bit of moisture got trapped between the phone and the case.
Knowing how tough red stains are to get out, in just about any environment, good luck is all I can say.
i had this same problem with a old nokia i had a blue case on it and it somehow stained the battery cover blue . i tried everything to get it off but i was desperate and said hey let me try some black magic spray on tire shine .left it on there for about five min and it wiped off like butter lol also works good for stickers on car bumpers let me know if this helps .
toreone said:
Just get yourself a nice black case and with time the purple might wear down. I would much rather do that than ruin the rubbery finish it has!? But then again..i guess the choice is yours..my guess would be that it was a case with a custom paint job because there is no reason why the finish should have been coming off.
Click to expand...
Click to collapse
Yes it was :/ the seller sent it with the pink/purple case, looks like it was spray painted (very poorly too). I do have a black rubber case that came with my first one, but i can't see it helping anytime soon..
Yeah, I suspect that color is probably actually "Beijing Pink"...classic mark (no pun intended) of a cheap paint job on a cheap case.
I haven't tried alcohol on this phone so I don't know if it'll affect the finish or not. Sometimes you can get that stuff to come up with a pencil eraser, but only in certain situations. Might be worth a try though.
Click to expand...
Click to collapse
yeah ill give that a try lol seems safe enough. (and the purple seems to be "soaked' into the finish ..at least thats what it looks like..) thanks!
Looks like a bit of moisture got trapped between the phone and the case.
Knowing how tough red stains are to get out, in just about any environment, good luck is all I can say.
Click to expand...
Click to collapse
If you can't take it off with an eraser you'll end up buying a cover. If you use alcohol and can't remove it or damage the finish you're still going to end up putting a cover.
I say you just try the alcohol route. If it doesn't come off then that's fine cuz you were going to slap cover on it anyways. I'd try a mr. clean magic eraser sponge, orange citrus cleaner stuff, goo-gone and alcohol being my last resort. Use Q Tips.
Click to expand...
Click to collapse
Thanks alot guys
The eraser didn't seem to work :/ , haven't tried the alcohol yet but I was wonderin if any of you knew about using acetone, nail polish remover, or gunkOff as far as embeded spray paint removal? (like which route is the safest)

[Guide] Turn your G4's glossy black edge into a matte black edge! No paint and easy!

DISCLAIMER: I am not responsible for any unwanted damage you may cause to your device, this is to be a sharing of an idea which happened to work for me and a sort of framework for how you may also accomplish this.
So basically, I despise how terribly fingerprints show on my G4's edge, that's a nit pick. My main complaint is that because it's a glossy plastic, it gets scratched very easily and shows that just as bad, not to mention it's obviously plastic masking as metal and not doing a good job, or more simply put, makes this flagship look cheap. I had a vision of a G4 with a flat black edge, I thought I'd grab a nail file from my bathroom -the giant popsicle stick ones- and use it to gently wear away at the shiny coating. My nail file had two sides, a fine side and a coarser side, I used the fine side exclusively with higher pressure strokes in the beginning to remove the shiny coating, using gentler and broader strokes to smooth, got one of those crazy nail file tools that have multiple sides and are made of two sides with softer layers of material in between, the two sides are also split into different functions, ones usually a buffer and the other is a super fine nail file, fine than the former one.....then I used this same tool to buff and clean up the edges and make sure all is smooth and nice, worked excellently, can also probably use super fine sandpaper and a cloth.
My back plate was off and battery removed, I used the popsicle nail file one side at a time starting with rougher strokes to get rid of the shiny coating -which will distinctly flake away as white little crumbs of plastic- it will take a few passes to completely strip the coating off the edge, you'll notice it lingers like a sort of residue as it contrasts quite distinctly against the revealed plastic, once the coating is nonexistent begin to smooth and finish the side until it is uniform in color and looks completely smooth, you want to keep the direction of the strokes consistent as it will impact the uniformity and smoothness, I went horizontally around the phone if it were laying flat and that gave me great results, give the corners some extra attention but its the same idea, and thanks to the battery back being off I was able to make the finish meet the edge of the battery door by angling the file accordingly, repeat these steps loosely and gently with either the multi-tool-file or extra fine grit sandpaper, use your judgment, buff and finish to your heart's desire. During the entire process be sure to regularly clean off the sandpaper, file and sides of the phone on a cloth of some sort between passes as you will notice the sandpaper glide and will be clogged with material, I was wearing some bumming pants so I just rubbed it off on those, worked wonderfully. Obviously you are removing incredibly small layers of material so guys be careful, you could probably remove quite a bit before anything happens but that can also effec look of things quite badly so try to make it even. I plugged important holes with bits of tissue, only the headphone jack really, the usb port is shallow enough where some air remove any particles.
The file helps especially because of its rigidity and shape, allowing me to have a lot of flexibility when dealing with such a small surface area.
You are putting files and sandpaper near your screen, be careful. I had a very good screen protecter but even then I didn't touch my screen once, you can get at a pretty steep angle like 45 degrees away from being parallel with the screen and still be fine, maybe less, just be wary, it's easy to slip and scratch, I don't think a soft brush would do much but a rough scratch could leave marks.
My IR blaster still works and it received the same treatment, I made no effort to avoid it.
I will post pictures soon, I wish I could use my phone to take a picture of my phone. I'll use someones phone tomorrow to do so.
Feel free to ask me anything if you have a question or I left some vital info out.
:laugh:
okay, waiting for the pics and a more detailed steps before jumping in.
superbonto said:
okay, waiting for the pics and a more detailed steps before jumping in.
Click to expand...
Click to collapse
So, I don't know how to post the pics cus as a new user I can't use links...
Also, you might consider adding a step of using progressively higher grits of sandpaper, and even going all the way to a rubbing compound to get super fine control over how much matte effect you desire. The matte of 300 grit sandpaper is different than the matte of say 450 grit etc.
KingFatty said:
Also, you might consider adding a step of using progressively higher grits of sandpaper, and even going all the way to a rubbing compound to get super fine control over how much matte effect you desire. The matte of 300 grit sandpaper is different than the matte of say 450 grit etc.
Click to expand...
Click to collapse
Yes absolutely, this is worth considering. I merely outlined how I did it to show that its not really necessary to get specific, I didn't go out of my way to get any of the tools I used and it came out satisfactory. I'll probably add it in once I get pics up and if people feel it's not as accessible as I thought.
mp2195 said:
So, I don't know how to post the pics cus as a new user I can't use links...
Click to expand...
Click to collapse
give us the link like www. linkhere.com/blah.img
mp2195 said:
So, I don't know how to post the pics cus as a new user I can't use links...
Click to expand...
Click to collapse
Use https://imgur.com/ to upload the picture and then post the direct link here, I'd love to see some pictures of this.
mp2195 said:
DISCLAIMER: I am not responsible for any unwanted damage you may cause to your device, this is to be a sharing of an idea which happened to work for me and a sort of framework for how you may also accomplish this.
So basically, I despise how terribly fingerprints show on my G4's edge, that's a nit pick. My main complaint is that because it's a glossy plastic, it gets scratched very easily and shows that just as bad, not to mention it's obviously plastic masking as metal and not doing a good job, or more simply put, makes this flagship look cheap. I had a vision of a G4 with a flat black edge, I thought I'd grab a nail file from my bathroom -the giant popsicle stick ones- and use it to gently wear away at the shiny coating. My nail file had two sides, a fine side and a coarser side, I used the fine side exclusively with higher pressure strokes in the beginning to remove the shiny coating, using gentler and broader strokes to smooth, got one of those crazy nail file tools that have multiple sides and are made of two sides with softer layers of material in between, the two sides are also split into different functions, ones usually a buffer and the other is a super fine nail file, fine than the former one.....then I used this same tool to buff and clean up the edges and make sure all is smooth and nice, worked excellently, can also probably use super fine sandpaper and a cloth.
My back plate was off and battery removed, I used the popsicle nail file one side at a time starting with rougher strokes to get rid of the shiny coating -which will distinctly flake away as white little crumbs of plastic- it will take a few passes to completely strip the coating off the edge, you'll notice it lingers like a sort of residue as it contrasts quite distinctly against the revealed plastic, once the coating is nonexistent begin to smooth and finish the side until it is uniform in color and looks completely smooth, you want to keep the direction of the strokes consistent as it will impact the uniformity and smoothness, I went horizontally around the phone if it were laying flat and that gave me great results, give the corners some extra attention but its the same idea, and thanks to the battery back being off I was able to make the finish meet the edge of the battery door by angling the file accordingly, repeat these steps loosely and gently with either the multi-tool-file or extra fine grit sandpaper, use your judgment, buff and finish to your heart's desire. During the entire process be sure to regularly clean off the sandpaper, file and sides of the phone on a cloth of some sort between passes as you will notice the sandpaper glide and will be clogged with material, I was wearing some bumming pants so I just rubbed it off on those, worked wonderfully. Obviously you are removing incredibly small layers of material so guys be careful, you could probably remove quite a bit before anything happens but that can also effec look of things quite badly so try to make it even. I plugged important holes with bits of tissue, only the headphone jack really, the usb port is shallow enough where some air remove any particles.
The file helps especially because of its rigidity and shape, allowing me to have a lot of flexibility when dealing with such a small surface area.
You are putting files and sandpaper near your screen, be careful. I had a very good screen protecter but even then I didn't touch my screen once, you can get at a pretty steep angle like 45 degrees away from being parallel with the screen and still be fine, maybe less, just be wary, it's easy to slip and scratch, I don't think a soft brush would do much but a rough scratch could leave marks.
My IR blaster still works and it received the same treatment, I made no effort to avoid it.
I will post pictures soon, I wish I could use my phone to take a picture of my phone. I'll use someones phone tomorrow to do so.
Feel free to ask me anything if you have a question or I left some vital info out.
:laugh:
Click to expand...
Click to collapse
I just came across this. I will be doing this tonight whn i get home from work. My otter box has scuffed mine pretty good. I like the nail file idea. Its work. Lol make u respect it a little more from the hard work.
make pressure on him so he shares the pics. :/
can the leathe from back cover be removed, am should be getting mine and it might be with leather.. i dont like it. just wondering if someone has taken the leather off the cover.. what it looks like. just plain molded plastic?
raptorddd said:
can the leathe from back cover be removed, am should be getting mine and it might be with leather.. i dont like it. just wondering if someone has taken the leather off the cover.. what it looks like. just plain molded plastic?
Click to expand...
Click to collapse
Dont do it! It will look horrendous! You better get a plastic back cover from eBay, I got one so I could use a Spigen Neo Hybid without damaging the leather back cover.
pakitos said:
Dont do it! It will look horrendous! You better get a plastic back cover from eBay, I got one so I could use a Spigen Neo Hybid without damaging the leather back cover.
Click to expand...
Click to collapse
i think leather looks GAY . no offense guys its just my opinion.. so it would be just a molded plastic right.? ill try see some stuff on amazon. what is the variant you have? is it from mexico..
raptorddd said:
i think leather looks GAY . no offense guys its just my opinion.. so it would be just a molded plastic right.? ill try see some stuff on amazon. what is the variant you have? is it from mexico..
Click to expand...
Click to collapse
Not molded plastic but lots of glue and sew points. Mine is from Telcel H815P
pakitos said:
Not molded plastic but lots of glue and sew points. Mine is from Telcel H815P
Click to expand...
Click to collapse
Unless glue cant be removed then itll look ugly... as foe the sewing points , thats a plu you get ventilation there.
this weather up north isnt very friendly... too bad you cant unlock bootloader.. whers the fun ?
Matte G4 Edge https://imgur.com/a/Bzspg
solventh said:
make pressure on him so he shares the pics. :/
Click to expand...
Click to collapse
Matte G4 Edge https://imgur.com/a/Bzspg
Thanks. Gold idea. Will try this when my broken test g4 arrives.
Can you pls seit the first post with the pics?
mp2195 said:
Matte G4 Edge https://imgur.com/a/Bzspg
Click to expand...
Click to collapse
thanks so much, man :]
Bullnados said:
Thanks. Gold idea. Will try this when my broken test g4 arrives.
Can you pls seit the first post with the pics?
Click to expand...
Click to collapse
For some stupid reason it won't let me edit my original post, weird. I'll try on my PC when I get a chance.
Perhaps to old?

Categories

Resources