Related
plz help me
iam trying to flash samsung s8530 wave II
using downloader
but it cant write the apps file as it gives me error message
abnormal sw detected ! upgrade only
now my phone cant boot ( it goes easly to download mode )
i used many firmwares but no sucess always dont want to flash the apps file
any help plase
best regards
Firmware before?
Firmware you try?
Example
S8530BUKA2 blabla
Some combinations are not working. Maybe you try wrong Firmware.
Maybe your handset have Netlock, maybe...
Maybe you should give more details.
Make Screeshot from Multiloader.
Maybe Multiloader 5.65 work better...
Which Windows?
32 or 64 bit?
Your first update or success before and only now failed...
Best Regards
i think he just forgot to close heavy programs on his computer
Even i had the same problem while i upgraded. Just do a hard reset by entering manual code (*2767*3855#) before and after the FW upgrade.
P.S- Keep your external SD card and you SIM out before you do the factory reset
bangalorerohan said:
Even i had the same problem while i upgraded. Just do a hard reset by entering manual code (*2767*3855#) before and after the FW upgrade.
P.S- Keep your external SD card and you SIM out before you do the factory reset
Click to expand...
Click to collapse
@bangalorerohan
srry to barge in! but i too have a problem with my wave 2 s8530, but the problem is i cant keying the code as the phone now hangs only on samsung logo! so any other way around?
WBR
ReyTEch.
I have same problem with my S8500.
and it always stoped during the apps writing.
found somebody a solution?
sorry for my bad english
stamas80 said:
I have same problem with my S8500.
and it always stoped during the apps writing.
found somebody a solution?
sorry for my bad english
Click to expand...
Click to collapse
Current Firmware Version
The Firmware you are trying to Flash
????????????
---------- Post added at 01:15 PM ---------- Previous post was at 01:13 PM ----------
bangalorerohan said:
Even i had the same problem while i upgraded. Just do a hard reset by entering manual code (*2767*3855#) before and after the FW upgrade.
P.S- Keep your external SD card and you SIM out before you do the factory reset
Click to expand...
Click to collapse
Not Necessary or mandatory....
stamas80 said:
I have same problem with my S8500.
and it always stoped during the apps writing.
found somebody a solution?
sorry for my bad english
Click to expand...
Click to collapse
As I remember this can be solved by flashing back a full 1.2 firmware (for example JL2) and then the 2.0 again.
But the problem indicates that the firmware you tried to install is somehow corrupt or it consists files from multiple versions (I faced the same issue when I tried to mix in CSC file from an earlier firmware).
Hi!
I tried to install Kitchen mod, and it went successful. But, then i tried to change the density in build.prop. Apparently something went wrong, and my phone froze at the load screen. So i went in to clockwork and did a recovery. But after that my phone booted into a very annoying bluescreen. I can't boot into clockwork, or anything. I can use the +/- to go into pink/purple screen.
Is it possible to fix this?
Greetings Arve
bluescreen... seems like the recovery.img is missing or corrupt. Try replacing it again
Hi again. I will try this once i get home. I figured out also that when i plug in the charger, it also goes into bluescreen Silly. But i will report back on how it works.
Thanks for quick reply
-Arve
Oh, snap. I opened the "removable disc f:\" And there was only(!) a folder called image, and a file called amss.mbn in it.
And then i copied over the original boot and recovery, but nothing happened.
Now i have no idea, bluescreen still comes =(
Thats no good, definitely sound like it got corrupted somehow..
There should be these files in the folder: (I can upload if you wish, but i'd recommend reinstalling a stock ROM and starting from the beginning because my image files are B137, although they're mostly the same)
amss.mbn
boot.img
EMMCBOOT.MBN
Recovery.img
Hi, that would be AWESOME! PM'd you =)
-Arve
install official rom,the problem will be solved
[email protected]@ said:
install official rom,the problem will be solved
Click to expand...
Click to collapse
Already solved
Just posting the fix here in case anybody would experience the same problem:
Oh, i put the missing file in first, and the bluescreen disappeared. But then i wouldn't get any further. Tried replacing everything and was then able to go into clockwork. Tried to recover the kitchen mod again, but didn't get further. Figured out that i wanted to try with the newest clockwork, so i installed the newest and tried the mod again. Voila Solved
arveparve said:
Just posting the fix here in case anybody would experience the same problem:
Oh, i put the missing file in first, and the bluescreen disappeared. But then i wouldn't get any further. Tried replacing everything and was then able to go into clockwork. Tried to recover the kitchen mod again, but didn't get further. Figured out that i wanted to try with the newest clockwork, so i installed the newest and tried the mod again. Voila Solved
Click to expand...
Click to collapse
HI there is it possible to PM me these files, I have done the same to my phone, and need them urgently
Thank you
akshizzle said:
HI there is it possible to PM me these files, I have done the same to my phone, and need them urgently
Thank you
Click to expand...
Click to collapse
There you go, it's not my own, but it should be fine >>http://dl.dropbox.com/u/13587974/boot.img_ORI_137SP04
In regards to recovery.img, just get this one, it's far superior to the original:
http://forum.xda-developers.com/showthread.php?p=14870348
katu2006 said:
There you go, it's not my own, but it should be fine >>http://dl.dropbox.com/u/13587974/boot.img_ORI_137SP04
In regards to recovery.img, just get this one, it's far superior to the original:
http://forum.xda-developers.com/showthread.php?p=14870348
Click to expand...
Click to collapse
IS there any way you could find amss.mbn or emmcboot.mbn?
I have totaly same but i cant get into recovery by any means. I've tried to restore files using my original boot files (made backup before any change) and i still cant get into clock, i just get blue screen any thing i do.
I'd really appriciate any help since im despert :// i have phone 4 days now
Can you issue adb commands? Logcat works?
u8800,cm7,[email protected]
help me u8800 blue screen
my u8800 get blue screen after format all things like image,cash.... by cwm
so i'm sooo sad my u8800 blue screen and i try to enter boot mode by keys up down and power pink screen appeared but no drivers install in pc
so i can't boot plz help
Pls help for blue screen
ryronz said:
bluescreen... seems like the recovery.img is missing or corrupt. Try replacing it again
Click to expand...
Click to collapse
Dear all i am very sad, i was using 2.3.5 official update on u8800 x5, then i tried to update 4.0, after installing that was not loading anything and got hang on startup,
then i tried to downgrade to 2.3 official cwm 5 was installed and i format everything, including boot etc, now it only shows blue screen. i can also go to pink screen, but as i connect to pc, it doesnt show and folder or drive so that i can copy dload or image files.
cannot access recovery mod or any type of drive during pink screen. how to solve my problem.
Remember i cannot access any drive or directory of device when connect to pc, no way to copy files or any thing.
arveparve said:
Just posting the fix here in case anybody would experience the same problem:
Oh, i put the missing file in first, and the bluescreen disappeared. But then i wouldn't get any further. Tried replacing everything and was then able to go into clockwork. Tried to recover the kitchen mod again, but didn't get further. Figured out that i wanted to try with the newest clockwork, so i installed the newest and tried the mod again. Voila Solved
Click to expand...
Click to collapse
could i have those files please the ones in the image folder i have a blue screen and its not cool!!!!
Yaar Please PM me the file.. I have the same issue.. thanks In adv..
ryronz said:
Thats no good, definitely sound like it got corrupted somehow..
There should be these files in the folder: (I can upload if you wish, but i'd recommend reinstalling a stock ROM and starting from the beginning because my image files are B137, although they're mostly the same)
amss.mbn
boot.img
EMMCBOOT.MBN
Recovery.img
Click to expand...
Click to collapse
---------- Post added at 12:48 PM ---------- Previous post was at 12:19 PM ----------
I'm also in the same problem. Please give a detailed description on what all are to do to fix this issue (blue screen on boot). I can see pink screen (vol + and -) and blue screen on boot. Please send the files and tell where to put those in..?
Please Help....:crying::crying::crying:
Plz Send Files to me also
ryronz said:
Thats no good, definitely sound like it got corrupted somehow..
There should be these files in the folder: (I can upload if you wish, but i'd recommend reinstalling a stock ROM and starting from the beginning because my image files are B137, although they're mostly the same)
amss.mbn
boot.img
EMMCBOOT.MBN
Recovery.img
Click to expand...
Click to collapse
Please send the files to me also. I'm also stuck in the same place.. Blue screen on boot!!! please give instructions for where to copy the files..?
mailtomeesubash said:
Please send the files to me also. I'm also stuck in the same place.. Blue screen on boot!!! please give instructions for where to copy the files..?
Click to expand...
Click to collapse
This is quite an old thread...try the other way he mentioned .
Sent from my U8800 using xda premium
mate, do you have any trouble flashing thunder custom rom for galaxy S4 (I9500) ? because i did, i try to flash that rom for 2.0 and 2.1 version over cwm 6.0.0.4.5 but it always says " E: cant open sdcard lunux os.zip (bad) installing aborted". this never happen if i flash other custom rom for galaxy s4 i9500, any solution?
ellie_idols said:
mate, do you have any trouble flashing thunder custom rom for galaxy S4 (I9500) ? because i did, i try to flash that rom for 2.0 and 2.1 version over cwm 6.0.0.4.5 but it always says " E: cant open sdcard lunux os.zip (bad) installing aborted". this never happen if i flash other custom rom for galaxy s4 i9500, any solution?
Click to expand...
Click to collapse
Make sure the file you download is not corrupt and please check if the file has the right MD5hash numbers.
Repulsa said:
Make sure the file you download is not corrupt and please check if the file has the right MD5hash numbers.
Click to expand...
Click to collapse
how i check the MD5hash number is the right one? and if that not the right number, how do i solve it? sorry i newbie in this kind of things
ellie_idols said:
how i check the MD5hash number is the right one? and if that not the right number, how do i solve it? sorry i newbie in this kind of things
Click to expand...
Click to collapse
Hello again , well i use a root explorer to check the md5hash ,and try to redownload the file, maybe when you were downloading the file suddenly the connection got interrupted have a nice day.
Repulsa said:
Hello again , well i use a root explorer to check the md5hash ,and try to redownload the file, maybe when you were downloading the file suddenly the connection got interrupted have a nice day.
Click to expand...
Click to collapse
thanks mate, will try it,
Hi, guys.
I am experiencing some strange issue with my SGY. After experimenting with several ROMs with no issues, I went back to stock firmware. But, after some days of normal use, suddenly the phone got into a bootloop. Definitely it was a softbrick. I can enter recovery menu and use Odin with no problems.
I seen in CWM that I can't mount /data partition, mount command says 'invalid parameter' when trying to mount /data. Formatting does not work, since it is not true formating, only deleting. You can only delete the /data contents if you mount it, but it can't be mounted. I don't know why.
My happyness ends here. I flashed dozens of images, kernels and ROMs, but the issue is still happening. Last time, I flashed the Merruk kernel to get root and start debugging.
I can go into ADB, and I discovered wich /dev/stl11 really was not mounted in /data. I mounted it, then the phone played the starting sound (maybe I achieved one step forward ), but it does not vibrate and keep at bootloop.
Attached is the logcat file.
Can someone give a clue of how to debug this? The SGY has some type of fstab file? where is it?
try flashing stock rom via odin and also include this file in the pit section (unzip it first)
http://forum.xda-developers.com/attachment.php?attachmentid=1489509
if you are in europe this firmwire is tested by me - its a wipe pack so should format everything
http://d-h.st/FhE
note all the above is for GT-S5360 only
Good news!
marcussmith2626 said:
try flashing stock rom via odin and also include this file in the pit section (unzip it first)
http://forum.xda-developers.com/attachment.php?attachmentid=1489509
Click to expand...
Click to collapse
This do not work. I used it already. It appears partition was wrotten to on the partition table itself, not on data area...
marcussmith2626 said:
if you are in europe this firmwire is tested by me - its a wipe pack so should format everything
http://d-h.st/FhE
note all the above is for GT-S5360 only
Click to expand...
Click to collapse
I am on Brazil (GT-S5360B), but at last resort I flashed your full ROM (including pit file)... then voila! It works!!!
Since your MODEM/CSC files are different, I can't tune some bands, but the wipe resolved the /data problem.
Now I will try to flash my local ROM again. None of my ROMs does wipe, so I am hopeful!!!
Thank you for this great step ahead :good:
luzemario said:
Good news!
I am on Brazil (GT-S5360B), but at last resort I flashed you full ROM (including pit file)... then voila! It works!!!
Since your MODEM/CSC files are different, I can't tune some bands, but the wipe resolved the /data problem.
Now I will try to flash my local ROM again. None of my ROMs does wipe, so I am hopeful!!!
Thank you for this great step ahead :good:
Click to expand...
Click to collapse
YESSSS!!! IT WORKS!!!
marcussmith2626,
Thank you very much. I flashed my local S5360B ROM and the SGY has come to life again!
Starting to experiment with custom ROMs again... :victory:
luzemario said:
Good news!
This do not work. I used it already. It appears partition is wrotten to on the partition table itself, not on data area...
I am on Brazil (GT-S5360B), but at last resort I flashed you full ROM (including pit file)... then voila! It works!!!
Since your MODEM/CSC files are different, I can't tune some bands, but the wipe resolved the /data problem.
Now I will try to flash my local ROM again. None of my ROMs does wipe, so I am hopeful!!!
Thank you for this great step ahead :good:
Click to expand...
Click to collapse
all you need to do is just flash the csc of your region firmware and it should work however below is the full firmware of your phone model
this is the firmware you need for brazil 5360B (general firmware - your carrier might need a specific csc)
http://terafile.co/0669473d6102/S5360BUTME2_S5360BZTOMJ1_ZTO.zip
how ever it is not odin flashable
follow my guide below to split it into odin flashable parts like I did with the european firmware
http://forum.xda-developers.com/showthread.php?p=49543982
---------- Post added at 12:41 AM ---------- Previous post was at 12:35 AM ----------
luzemario said:
YESSSS!!! IT WORKS!!!
marcussmith2626,
Thank you very much. I flashed my local S5360B ROM and the SGY has come to life again!
Starting to experiment with custom ROMs again... :victory:
Click to expand...
Click to collapse
Thats good - when using stock firmware always best to use wipe packs
you can create your own - see my post above
marcussmith2626 said:
this is the firmware you need for brazil 5360B (general firmware - your carrier might need a specific csc)
http://terafile.co/0669473d6102/S5360BUTME2_S5360BZTOMJ1_ZTO.zip
Click to expand...
Click to collapse
Terafile is broken at this time. This link is pointing to a offline server "wednesday.terafile.co:182". I can ping and trace to it, but port 182 appears to be blocked.
I don't like Terafile at all. I had several troubles with files downloaded from it. But SamMobile uses it...
luzemario said:
Terafile is broken at this time. This link is pointing to a offline server "wednesday.terafile.co:182". I can ping and trace to it, but port 182 appears to be blocked.
I don't like Terafile at all. I had several troubles with files downloaded from it. But SamMobile uses it...
Click to expand...
Click to collapse
works fine for me - maybe its your isp
I have already downloaded it and split it - I will upload it to my firmware thread over the weekend
marcussmith2626 said:
works fine for me - maybe its your isp
I have already downloaded it and split it - I will upload it to my firmware thread over the weekend
Click to expand...
Click to collapse
Strange... I can telnet to it and issue a single get...
Code:
GET
<html>
<head><title>400 Bad Request</title></head>
<body bgcolor="white">
<center><h1>400 Bad Request</h1></center>
<hr><center>nginx</center>
</body>
</html>
Yeah, unbelievable... this is a Firefox "bug"... I can do it with the old IE7... one more to the bugzilla queue...
luzemario said:
Strange... I can telnet to it and issue a single get...
Code:
GET
<html>
<head><title>400 Bad Request</title></head>
<body bgcolor="white">
<center><h1>400 Bad Request</h1></center>
<hr><center>nginx</center>
</body>
</html>
Yeah, unbelievable... this is a Firefox "bug"... I can do it with the old IE7... one more to the bugzilla queue...
Click to expand...
Click to collapse
works with my firefox - so I dont know whats wrong with yours - try updating and resetting it
Hi guys
I will be quick and clear! after formatting my lg g6, the phone does not want to turn on ... there is only the TWRP menu, I tried to copy a rom but impossible to copy ... how to do it? do you need the flash?
Help me please
Thank you so much
wesqxazeft said:
Hi guys
I will be quick and clear! after formatting my lg g6, the phone does not want to turn on ... there is only the TWRP menu, I tried to copy a rom but impossible to copy ... how to do it? do you need the flash?
Help me please
Thank you so much
Click to expand...
Click to collapse
that means that you are stuck in boot loop. If you formatted whole system there is no informatipn like formating Windows, you need to flash new ROM, or use LG UP to flash stock Rom. Always before formating system make backups.
SkylineDiT said:
that means that you are stuck in boot loop. If you formatted whole system there is no informatipn like formating Windows, you need to flash new ROM, or use LG UP to flash stock Rom. Always before formating system make backups.
Click to expand...
Click to collapse
hi, thanks for responding to my message.
When I use LGUP it doesn't work, it bug. As soon as I click on FLASH it bug..message of error which appears ... I do not know if it is the rom which is not
compatible or ....
wesqxazeft said:
hi, thanks for responding to my message.
When I use LGUP it doesn't work, it bug. As soon as I click on FLASH it bug..message of error which appears ... I do not know if it is the rom which is not
compatible or ....
Click to expand...
Click to collapse
What type of message? Wrong or missing DLL file?
SkylineDiT said:
What type of message? Wrong or missing DLL file?
Click to expand...
Click to collapse
Later I will do another test and post the message