Hi All,
i received my device 7 days ago. The Devices worked perfectly.
Yesterday, i deciced to test the Canogenmod Nightly for about one day and then i want to revert back to stock. i downloaded the Image using Nexus 4 Toolkit, i flashed it manually with the flash-all.bat. I never flashed a custom Recovery, only temp-booted it with fastboot.
But after restoring the Stock rom - it is very unstable, Lots of warm reboot (X bootsplah during usage or idle mode) unstable WIFI.
so i think Google removed the Factory Image because of it (and the LTE Story, of course).
maybe someone took a full backup from the original supplied rom, (GSM Europe)
Any help would be appreciated .
Thanks
Edit: i tested with both Factory Image (4.2 and 4.2.1)
Isn't the stock rom what was on your phone before you flashed (and was fine)?
Bar81 said:
Isn't the stock rom what was on your phone before you flashed (and was fine)?
Click to expand...
Click to collapse
there must be somthing different, I didn't took a full Backup from the Original preinstalled ROM, because i thought:" i don't care, if i want to revert to stock ROM, i can download it..."
i think, i learned my lession
I have used the stock images available at phantasmagoria twice and they are perfectly stable.
Hi estallings15,
that sounds good, where can i find it?
Thanks a lot.
TrusterX said:
Hi estallings15,
that sounds good, where can i find it?
Thanks a lot.
Click to expand...
Click to collapse
In the massive sticky thread in General on how to go back to stock
EddyOS said:
In the massive sticky thread in General on how to go back to stock
Click to expand...
Click to collapse
Hahaha!
TrusterX said:
Hi estallings15,
that sounds good, where can i find it?
Thanks a lot.
Click to expand...
Click to collapse
http://www.randomphantasmagoria.com/firmware/
Make sure you go to efrant's thread and thank him.
aaah, i have to call my doc, he has to replace my eyes.
Thanks for pointing me in the right direction.
Edit: i flashed that image and it works perfectly. Thanks again.
Related
hello everyone hope someone can help I did the update for the 4.3 and a few days I realized that sometime I'm trying to make calls or receive calls and there's no sound no out And no in on the other side is answering but no sound either he doesn't hear me I don't hear him either and what I have to do is reset the phone mains take the battery off and put it back and turn it back on And it works again and tell it's happening again this is driving me nuts because it can happen twice a day by the way my phone is flashed to boost mobile and this is a sprin Phone Everything works beautiful until the last update: thank you guys hope someone can help
Not nearly enough info to help.
you say you
did the update for the 4.3
Click to expand...
Click to collapse
.
Question is HOW? - via OTA? via flashing ROM from dev section? If you flashed a ROM, which one? And how did you do it - steps you took.
leaderbuilder said:
Not nearly enough info to help.
you say you .
Question is HOW? - via OTA? via flashing ROM from dev section? If you flashed a ROM, which one? And how did you do it - steps you took.
Click to expand...
Click to collapse
I didn't do anything or changing the Rom the phone was flashed 7 months ago I never have problems I just lately I did the update for the 4.3 and I start having those problems that's why I was checking if there is any issue with the update and if you recommend to do anything I would love to know thank you for the response
and if you think to go back to the 4.2 will Help and how can I do it thanks
eli7477 said:
I didn't do anything or changing the Rom the phone was flashed 7 months ago I never have problems I just lately I did the update for the 4.3 and I start having those problems that's why I was checking if there is any issue with the update and if you recommend to do anything I would love to know thank you for the response
and if you think to go back to the 4.2 will Help and how can I do it thanks
Click to expand...
Click to collapse
Okay.
Again I'm still not quite getting what you did.
So I'll assume that when you say,
I did the update for the 4.3
Click to expand...
Click to collapse
you mean you took the Over The Air update - the one from Sprint; your phone says Firmware update available.... etc.
IS THAT CORRECT?
If so you CANNOT go back to 4.2 period. End of story on that route.
You can however, If my above assumption is correct, and you didn't apply the update in some other way re-flash MJA or flash a custom ROM. For that you'll need to root your phone (CF-Autoroot works), install custom recovery (for 4.3 Philz is the one to use) and then flash the ROM as per the developers instructions.
leaderbuilder said:
Okay.
Again I'm still not quite getting what you did.
So I'll assume that when you say, you mean you took the Over The Air update - the one from Sprint; your phone says Firmware update available.... etc.
IS THAT CORRECT?
If so you CANNOT go back to 4.2 period. End of story on that route.
You can however, If my above assumption is correct, and you didn't apply the update in some other way re-flash MJA or flash a custom ROM. For that you'll need to root your phone (CF-Autoroot works), install custom recovery (for 4.3 Philz is the one to use) and then flash the ROM as per the developers instructions.
Click to expand...
Click to collapse
Thank you I will work on it I will let u know
[Noobs Guide] How to get "DN3 (Ditto Note 3)" ROM working in Samsung Galaxy Note 2
Hi Everyone,
I just now finished installing the ROM successfully so i thought i would atleast make this small tutorial for others, thinking it might be helping them. You wouldn't believe me. I haven't slept the whole night (9hrz without gap) to get this ROM working in my note 2.
Now, a few things about my phone. Trust me, you will require this info because you will then understand what your phone and my phone is. So you could have a clear idea on how to start or where to start.
Click to expand...
Click to collapse
Phone : Samsung Galaxy Note II N7100
Android Version : 4.1.1 (Its the same version that i had since the time i bought the phone, i didn't update or anything.)
Rooted : NO
Recovery : STOCK
Firmware: Indian firmware (sorry, i don't remember the firmware name)
Click to expand...
Click to collapse
Now, prerequisites...!
◘ A Samsung Galaxy Note II with definite 70% and above battery if you are a beginner.
◘ The data cable that is actually working when connected between phone & laptop.
◘ An external SD card with a minimum of 4 GB storage so that you can place the ROM to flash it through Recovery.
◘ DN3 (Ditto Note 3) ROM from E-team (Electron Team) downloaded & kept ready in your computer, because it's about 1.48 GB size.
[Important: See that the ROM is downloaded without any breaks. Check whether it is the "Download Success" or "Download Fail" in the Download Manager. If the ROM is not successfully downloaded & you continue to flash it into your Note 2. Then you are going to feel very bad (Trust me). So check it & only then be ready to start.]
Click to expand...
Click to collapse
Procedure...!
First : Rooting
follow this ----> http://beginnerguides.net/root/samsung-galaxy-note-2
rooting related files in the Root.rar
Click to expand...
Click to collapse
Second : EFS backup
follow this -----> http://forum.xda-developers.com/showthread.php?t=2255943
EFS backup files in the EFS.rar
Click to expand...
Click to collapse
Third : Flashing the Philz recovery
follow this ----> http://www.youtube.com/watch?v=RKfURLDlCRg
Philz recovery file in Recovery.rar
Click to expand...
Click to collapse
Fourth : Taking a Nandroid backup of the present stock ROM.
follow this -----> http://www.youtube.com/watch?v=DWbGzUHqOzI
in that your procedure is shown inbetween from 1:25 second to 1:56 second, after 1:56 seconds, do the follow what is being shown, slip back to here and do this ----> Just press the "backup" button and then "yes" , it wil take some time and backup your data, after backup completed, "reboot phone". In the sd card folder called "clockwordmod" will be there. This is the folder your backup is made by philz recovery. copy this entire "clockworkmod" folder to your computer. you will need it in the future. Keep it very safe if u have backed up a stock rom and require warrany.
Click to expand...
Click to collapse
Fifth : Flashing the DN3 ROM into your phone.
Follow this -----> http://www.youtube.com/watch?v=DWbGzUHqOzI Now see the full video in the link, do, exactly as he does, but at one point where u will see a selection of modem's (03:32 seconds). If you are from india, select mk4 rom , if u are other country, select mk9.. and on completion follow on screen steps like you saw in the video. In the video u will see wifi working, but here your wifi wont work, so skip there and come back do the 6th step to solve the wifi issue.
Click to expand...
Click to collapse
Sixth : Flashing the mj5 bootloader for fixing wifi in the Ditto Note 3 ROM
Follow this --->
Open Odin v3.07 from PC, Press PDA tab and select downloaded MJ5 Bootloader
Put device in download mode (Vol dwn + home +power)
Connect device and Flash
MJ5 bootloader file is in
MJ5bootloader.rar
Click to expand...
Click to collapse
Disclaimer:
As there are many rules over the forums i am restricted to some limit. I apologize. I just gathered all the links of forums that helped me and placed them over here with some quick download links. Also, just like everyone mention, I do alert you, that i am not responsible for any damage caused to your device. I can help you so far. But cannot buy you one if u damaged. Its solely your responsibility. You are the owner and you are responsible to what you might encounter. On reading this, you understand and agree that I'm no way responsible for anything, with this said, you are ready to start yourself.
Click to expand...
Click to collapse
credits
@iskwl
@thealphapoint
@kethan
@electron team
Click to expand...
Click to collapse
I'm sorry for english mistakes, but thank you all who read this. If any queries, comment below. Would be helping you...!
Click to expand...
Click to collapse
I have one question.
I need to use obligatorily external SD card?
Or I can place to internal too?
All custom roms flashed via external SD ?
How is the battery drain in this rom? I tired quite a few 4.3 based roms and the battery drain was terrible. So I happily went back to 4.1.2 based rom with perseus kernel minimal ram usage and amazing battery life. So just wanted to know about the battery drain and whether it can be used with the perseus kernel?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Reply....
stebik said:
I have one question.
I need to use obligatorily external SD card?
Or I can place to internal too?
All custom roms flashed via external SD ?
Click to expand...
Click to collapse
I need to use obligatorily external SD card?
answer : Yes, OBLIGATORILY external SD card
I say internal also can be used, but the operating manner then would be little complicated for which you might land up into a CONFUSED situation. So it's much better to do it through a SD card
Or I can place to internal too?
Answer : Yes, you can place ,but i told u right If u want it complicated, you may if you already have an idea about Philz touch recovery & etc, then, step up
All custom roms flashed via external SD ?
Answer : You see, most of the people actually try to follow the safe and secure way so they do the flash of ROM's from the External SD card
Now doubts clarified ?
If got any more :cyclops: , just lemme know
Your Doubts just got clarified WiTH SCREENSHOTS
Zubair1024 said:
How is the battery drain in this rom? I tired quite a few 4.3 based roms and the battery drain was terrible. So I happily went back to 4.1.2 based rom with perseus kernel minimal ram usage and amazing battery life. So just wanted to know about the battery drain and whether it can be used with the perseus kernel?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
check out the screenshots attached
You will find out everything u needed
check this out for your kernel doubt.... http://forum.xda-developers.com/showpost.php?p=48701697&postcount=10216
He said tht those are the settings from his Ditto note 3 rom when using perseus kernel, so thats it Voila !
The kernal works celebrate
in this thread http://forum.xda-developers.com/showpost.php?p=48018349&postcount=7446
that perseus boy shared his happiness just check out
he was using the DItto note 3 rom aswell just like others
srinuscooby said:
check out the screenshots attached
You will find out everything u needed
check this out for your kernel doubt.... http://forum.xda-developers.com/showpost.php?p=48701697&postcount=10216
He said tht those are the settings from his Ditto note 3 rom when using perseus kernel, so thats it Voila !
The kernal works celebrate
in this thread http://forum.xda-developers.com/showpost.php?p=48018349&postcount=7446
that perseus boy shared his happiness just check out
he was using the DItto note 3 rom aswell just like others
Click to expand...
Click to collapse
Wow... Thanks for the information ... Now I'll definitely flash this rom!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Just a word
Zubair1024 said:
Wow... Thanks for the information ... Now I'll definitely flash this rom!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Haha...:laugh:
okay, do it :silly:
if any doubts am here to help u out
So, go Crazzzzeeey over it
:fingers-crossed:Rock oN:fingers-crossed:
Ok, I'm looking to do this myself, I'm on a i317 (at&t lte variant) and have found the ROM for that version. My question is, I was told that it would be "trickier" to flash the custom ROM because I have already updated my phone to 4.3 stock. Now I'm aware that flashing the custom ROM will now void my warranty, that is not my concern, my question is what will make it "trickier?" I was not able to receive a response from the person that said this, and now I'm just trying to gather info before attempting this.
bigpoppapaul said:
My question is, I was told that it would be "trickier" to flash the custom ROM because I have already updated my phone to 4.3 stock.
Click to expand...
Click to collapse
I was under the same impression after I upgraded my N7105T (Australia - Telstra) to 4.3 as well.
The reality is that it is not trickier in the slightest. What did happen for me upon the initial flashing of the ROM from Philz recovery was that I was stuck on the initial boot logo until I pulled out the battery and restarted my phone in Philz recovery again. I then flashed the bootloader, thinking that was why it got stuck. After that, all went just fine after performing the installation/flashing again in Philz recovery. I performed a reboot into recovery after the install was completed, factory reset the handset and all was fine thereafter. I was able to restore my data as well as the majority of my apps. Some needed reinstallation, such as phone banking for obvious reasons but all in all, it was very much the painless process.
I'm really happy with it now. I just recently flashed it with the AGNi kernel as well, which was a nice improvement though I've changed from the zzmove battery profile to zzmove optimised profile to see if I still get any issues with apps slowing down to a grinding halt before needing a reboot of the handset to get it back up to speed again.
4.3 bootloader for n7105
Artstar said:
I was under the same impression after I upgraded my N7105T (Australia - Telstra) to 4.3 as well.
The reality is that it is not trickier in the slightest. What did happen for me upon the initial flashing of the ROM from Philz recovery was that I was stuck on the initial boot logo until I pulled out the battery and restarted my phone in Philz recovery again. I then flashed the bootloader, thinking that was why it got stuck. After that, all went just fine after performing the installation/flashing again in Philz recovery. I performed a reboot into recovery after the install was completed, factory reset the handset and all was fine thereafter. I was able to restore my data as well as the majority of my apps. Some needed reinstallation, such as phone banking for obvious reasons but all in all, it was very much the painless process.
I'm really happy with it now. I just recently flashed it with the AGNi kernel as well, which was a nice improvement though I've changed from the zzmove battery profile to zzmove optimised profile to see if I still get any issues with apps slowing down to a grinding halt before needing a reboot of the handset to get it back up to speed again.
Click to expand...
Click to collapse
Hi please where can I download the 4.3 bootloader for n7105? I already flashed the rom but wife not working. Devil kernel not working well too.
ibblaw77 said:
Hi please where can I download the 4.3 bootloader for n7105? I already flashed the rom but wife not working. Devil kernel not working well too.
Click to expand...
Click to collapse
Was it absolutely necessary for you to quote my entire message when it had very little to do with your question? Please just use the reply button instead of the reply with quoting next time. It will clutter the forums a lot less.
As for your wife not working, I would suggest a divorce.
For the rest of the things you're seeking, I searched the forum and found everything I needed.
Sorry quoting yoi
Sorry I quoted your entire post.
If I had an answer, I won't border asking for help cos I still can't see how you have helped me with your post.
Thanks anyway
In searching through the forums and Google, I found only bootloaders for N7100. What I did find was recommendations to simply upgrade to the official Samsung 4.3 release using Kies and then following the installation procedure for DN3.
Not sure why I'm only seeing N7100 versions of the MJ5 bootloader but everything is smooth on my N7105T with the MK2 bootloader.
Artstar said:
I'm really happy with it now. I just recently flashed it with the AGNi kernel as well, which was a nice improvement though I've changed from the zzmove battery profile to zzmove optimised profile to see if I still get any issues with apps slowing down to a grinding halt before needing a reboot of the handset to get it back up to speed again.
Click to expand...
Click to collapse
Thanks for the response, I ended up doing it and much like yourself, it went beautifully. I'm quite happy with it. I haven't really had any kernel issues so I'm hesitant to flash other ones unless they greatly improve something. Did you flash the the new kernel because of the app slowdown issue you were having? Or just to improve performance in general?
It was to beef up the phone's performance in terms of power consumption but that seemed to work against me.
"If it sounds good to you, that's all that matters. " - Artstar
Note 2 i317, AT&T variant WiFi not working
srinuscooby said:
Hi Everyone,
[/SIZE][/COLOR]
Now, prerequisites...!
Procedure...!
Disclaimer:
credits
Click to expand...
Click to collapse
The rom works like a charm, except for a gimmick: The WiFi is not working. Tried flashing a wifi patch and it worked, but then the camera stopped working. After hours trying to make the camera work, now it does but the wifi does not.
When I try turning the WiFi on it just switches off automatically. Also flashed Devil Kernel, Toooiiko (or something of the sorts) kernel, and they just made the problem worse by fixing the wifi but no camera AND no mobile network of any kind. :rolleyes
Any ideas/suggestions are more than welcome.
GaboCed said:
The rom works like a charm, except for a gimmick: The WiFi is not working. Tried flashing a wifi patch and it worked, but then the camera stopped working. After hours trying to make the camera work, now it does but the wifi does not.
When I try turning the WiFi on it just switches off automatically. Also flashed Devil Kernel, Toooiiko (or something of the sorts) kernel, and they just made the problem worse by fixing the wifi but no camera AND no mobile network of any kind. :rolleyes
Any ideas/suggestions are more than welcome.
Click to expand...
Click to collapse
Have u tried AIO fix, clear davik and cache.
I also had the same issue, after clean install with AIO fix and clear cache, it worked fine
Artstar said:
"If it sounds good to you, that's all that matters. " - Artstar
Click to expand...
Click to collapse
Hey Artstar,
I realize you don't like people quoting your entire posts so I thought I'd keep this one brief (not understanding 100% how XDA internals work, I wanted to make sure I got your attention by quoting you at least).
ANYWAYS
I have updated to 4.3 stock (vodafone) which turns out to be ML5 (from memory, phone is not working 100% right now).
Can I please ask (beg, lol) for a link to the bootloader you "flashed" to fix your problem? I've just:
1. updated to 4.3 stock
2. followed instructions on the DN3 V5 ROM install...
Now the first thing I've noticed is my phone won't detect my sim card :-/ So, into my old HTC my sim card goes! I need a phone for the morning, but would ideally like to have a note 2 with working DN3 rom... If you can help at all it would be GREATLY appreciated, as you said; I can't find a bootloader for the GT-N7105T... there are plenty for the other variants, but I really am having trouble finding one for ours.
This is very hopeful that my vodafone model is the same as your tesltra model based on the actual model number, but regardless I've got (and admittedly, I'm guessing a bit here) a dud bootloader installed and would greatly appreciate your input.
Thanks in advance mate, any help is much appreciated. I have searched the entire note 2 thread - perhaps my search skills are not up to scratch or perhaps there is no bootloader and I'm not understanding your instructions correctly.
Cheers!
Hi I am at official 4.3 jelly bean and my galaxy note2 GT N7100 is rooted and I want install ditto note 3 v5 rom on galaxy note 2 GT N7100 can you tell me proper steps from beginning how to install this rom on my phone
Sent from my GT-N7100 using XDA Premium 4 mobile app
I have the ATT G2. This phone is NOT rooted and is 100% stock. I upgraded to KK yesterday... some minor little bug just annoy me... is there a way to go back to 4.2.2 without rooting?
Thanks
1st.name.eric said:
I have the ATT G2. This phone is NOT rooted and is 100% stock. I upgraded to KK yesterday... some minor little bug just annoy me... is there a way to go back to 4.2.2 without rooting?
Thanks
Click to expand...
Click to collapse
idk about AT&T, but with a D80x, you'd just need to flash the proper KDZ using the LG Flashtool.
This request does not compute! !!!
Sent from my LG-D801 using Tapatalk
Yeah there is an easy way to go back. Go to this thread by @SuperSport http://forum.xda-developers.com/showthread.php?t=2663369 and download one of the JB installers. No root needed and it won't root your phone. I've used his installers to upgrade to KK and back to JB and it worked fine for me. Make sure to backup anything you want to keep because it will wipe all of your files.
thanks guys... that worked!
Hey guys I have this exact same issue (trying to go from the 4.4.2 back to 4.2.2) Except I'm on the Tmobile version of the G2 (D801 I believe). Any hope for me? I looked at that thread and those all seem to be AT&T versions.
Oh and I did that upgrade with no previous root or unlock or anything, bought from the store, and went right to 4.4.2 with the LG tool. now I wanna get back so i can root it.
Metalfan1185 said:
Hey guys I have this exact same issue (trying to go from the 4.4.2 back to 4.2.2) Except I'm on the Tmobile version of the G2 (D801 I believe). Any hope for me? I looked at that thread and those all seem to be AT&T versions.
Click to expand...
Click to collapse
here you go- http://forum.xda-developers.com/showthread.php?t=2432476
XxZombiePikachu said:
here you go- http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Many thanks I've searched all over for that!
Just curious, what bugs or annoyance do you guys have with the new stock KK? I've been on it for the past day or so and find it extremely smooth (did factory reset after flashing and started everything over).
ilovecats said:
Just curious, what bugs or annoyance do you guys have with the new stock KK? I've been on it for the past day or so and find it extremely smooth (did factory reset after flashing and started everything over).
Click to expand...
Click to collapse
my only annoyance is that every few days the wallpapers I put get changed to stock I haven't figured out why this happens
ilovecats said:
Just curious, what bugs or annoyance do you guys have with the new stock KK? I've been on it for the past day or so and find it extremely smooth (did factory reset after flashing and started everything over).
Click to expand...
Click to collapse
mine was that I use yahoo IM a lot. It is probably more of a yahoo issue than KK, but I lost my LED light for yahoo. Other than that, it seemed exactly the same as 4.2.2 did except added a couple of apps...
FWIT: I did this procedure, it worked like a champ... worked extremely well... but if ya do it, might consider removing the SIM card. It like erased my SIM... I don't know why it would... but it didn't work after that. Had to go to ATT and get it reset. Didn't cost anything, just a minor nuisance. Over all, I would do it again!
Thanks!
XxZombiePikachu said:
my only annoyance is that every few days the wallpapers I put get changed to stock I haven't figured out why this happens
Click to expand...
Click to collapse
I always do a factory reset after a big system update because I've found that you tend to get bugs and things after the update. The reset usually cures it.
Brad1971 said:
I always do a factory reset after a big system update because I've found that you tend to get bugs and things after the update. The reset usually cures it.
Click to expand...
Click to collapse
well im going to 10d so I can reflash kk but this I will be keeping recovery
Hi,
I tried to reply to the actual thread http://forum.xda-developers.com/showthread.php?t=3486600 but I'm too new so it won't let me.
I've followed everything in this blog post and to me it looks like it all worked. ADB works, fastboot goes away and spends 4-5 minutes copying stuff and it says reboot and clear data..
I've done all that and all I get is the normal stock Chinese/English rom.
Has anyone got any ideas.
Thanks
Ben
Disregard
Sorry, if a mod can delete this post please do, just realised I'd downloaded the stock rom to fastboot, not the other one. Didn't realise there were 2 different versions of the stock rom.
Will try the other one tomorrow and see how it goes.
http://forum.xda-developers.com/showpost.php?p=69292032&postcount=4
All good now
cacimbo said:
http://forum.xda-developers.com/showpost.php?p=69292032&postcount=4
Click to expand...
Click to collapse
I managed to download the ROM from
https://mega.nz/#!0ZYUUDCL!0oTIS-PyOMvKOLaPBHd1Ye1-M3RMaFtalDi_w6EsZYM
which worked perfectly.... I didn't realise the file I originally downloaded was a stock ROM designed to be flashed using Fastboot. I miss read it and thought that the one you renamed to update.zip was stock and the other was multi language.
Soon after posting on here I thought I'd double check and found my mistake.
I've managed to flash away from the stock ROM and everything is working perfectly for me now..... Other than Android pay, but otherwise I'm loving my phone.
Ben
I posted the same thread a week ago and got no help. My moto x has a problem that whatever rom i flash it just stays open for a few minutes then restarts so it's unusable. Please any suggestion is needed as this is my daily driver
Philo0o said:
I posted the same thread a week ago and got no help. My moto x has a problem that whatever rom i flash it just stays open for a few minutes then restarts so it's unusable. Please any suggestion is needed as this is my daily driver
Click to expand...
Click to collapse
What do you mean by it just stays open. Do you mean it never boots? Like a bootloop? If so, search 7.0 ROMs bootloop, you'll find the solution, tons of threads on the help and q&a here. But if you don't mean what I just explained then could you clarify?
Sorry for not being clear, i dont think it is bootloop. It boots into the rom no issues and i can use it normally and doesn't restart till a few minutes no matter what rom i flash.
Philo0o said:
Sorry for not being clear, i dont think it is bootloop. It boots into the rom no issues and i can use it normally and doesn't restart till a few minutes no matter what rom i flash.
Click to expand...
Click to collapse
If I were you I would flash back to stock and make sure you you don't have a hardware problem, If nothing else it's a chance to start over. I haven't gone to custom roms for these reasons, mine is my daily driver to and I can't afford to get caught without it.
Philo0o said:
Sorry for not being clear, i dont think it is bootloop. It boots into the rom no issues and i can use it normally and doesn't restart till a few minutes no matter what rom i flash.
Click to expand...
Click to collapse
No worries. Yeah I don't know what the issue could be, could be a ROM issue, it's weird though, but like the poster above me, it could be hardware failure and flashing stock would be a good way to find out.
I would love to go back to stock but how? All the tutorials are very hard for me to follow can you guide me to an easy one or tell me how?
Philo0o said:
I would love to go back to stock but how? All the tutorials are very hard for me to follow can you guide me to an easy one or tell me how?
Click to expand...
Click to collapse
I agree that they are a little hard to follow, I looked at them myself and it looks like the quickest way would be to go back to 6.0 and upgrade back to 7. But someone else could correct me on that.
For future reference, it's best to always twrp backup your stock rom before doing any kind of major changes especially custom roms. That way you can always fall back to original if something goes wrong.
tbkrazeey said:
I agree that they are a little hard to follow, I looked at them myself and it looks like the quickest way would be to go back to 6.0 and upgrade back to 7. But someone else could correct me on that.
For future reference, it's best to always twrp backup your stock rom before doing any kind of major changes especially custom roms. That way you can always fall back to original if something goes wrong.
Click to expand...
Click to collapse
I would go back to stock 6.0, if he hasn't upgraded to 7.0, I'll do some digging, find good guides, and post them here in a bit @Philo0o!
Yeh before i started flashing roms i was on stock 6.0, thank you so much
Spencervb256 said:
I would go back to stock 6.0, if he hasn't upgraded to 7.0, I'll do some digging, find good guides, and post them here in a bit @Philo0o!
Click to expand...
Click to collapse
I think I might also do a twrp backup of my 7.0 and make it public, but it will take me a couple of days before I can factory reset. There doesn't seem to be any stock 7.0 backups around on xda.
Philo0o said:
Yeh before i started flashing roms i was on stock 6.0, thank you so much
Click to expand...
Click to collapse
That's good news actually, there's a lot more stuff around for 6.0.
Philo0o said:
Yeh before i started flashing roms i was on stock 6.0, thank you so much
Click to expand...
Click to collapse
Alright if you wanna go the custom ROM route, don't update to stock 7.0, not many custom ROMs work with it's new firmware. I'll get you a guide to go back to stock 6.0 then!
Edit: Alright @Philo0o, here's a good page with all the firmware links for your phone, and the commands to flash the firmware are there for you. Let me know if you have any questions about that.
Also, when your ROMs aren't working, what are you doing to try again? what I mean is you could try a full data format in twrp. Not just a wipe of data, system, etc.. A full format isn't quite like going back to stock, but it may help if there are leftovers somewhere causing issues if that makes sense.
so if you wanna try a full format, backup your internal storage to a computer, or to an sd card, and then format, and then you will have a clean slate, move what you need back over to your phone and voila!
Ill look through that tutorial, and whenever i flash a rom i do a full a wipe
Philo0o said:
Ill look through that tutorial, and whenever i flash a rom i do a full a wipe
Click to expand...
Click to collapse
Alright, then yeah look through that tutorial. If the issue isn't there on stock, but is on custom ROMs, try asking in those threads