Related
I’m using an htc tytn ii and trying to install tomtom navigation software version 7 there on but getting the error “Installation was unsuccessful. The program or setting cannot be installed because it has not been digitally signed by a trusted certificate” where after the instalation shuts down. I’ve tried the tomtom software on my tytn with the same result. Any help?
I’ve already tried the file default-signed-disablesecurity.zip as well as turning off the appropriate messages with kaiser tweak with out any success. the tytn ii uses windows mobile 6 and the tytn windows mobile 5 just for some extre information in case it’s necessary
Thanks in advance
first, this is is NOT tytn/kaiser forum.
2nd, i had no problem installing TT7 on my Universal w/ WM6. Yes, it *****ed about Unsigned code but I selected OK and it installed just fined. Perhaps u downloaded a bad copy of TT7. Use the 7.450 version.
Hi there
Thanks for the advice. I've been searching high and low for that version of tomtom ... Do you know where I can download it? Are you able to post a link to't?
Thanks again
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums
I tried to install a Garmin Mobile XT from PC several weeks ago, but it was failed, so I deleted all files and didn't install it at all.
But when I connect my HD2 to PC, it pops up a dialog to ask installing this "Garmin Mobile XT" again (even I click yes last time) , how can I remove it?
Thanks in advance.
i have garmin mobile xt running on my hd2. works great. for some reason it runs on intermidiate gps and not from com4. i dont know why but i do know it works great. you should retry.
Hello,
I have a problem with my HD2, I can't activate bluetooth.
When I try to activate , HD2 tell me "BT stack unknow"
You know this problem ?
Thanks for your answers
TOMTOM?
Have you recently installed TOMTOM by any chance?
Just after installed it I found my Bluetooth stopped working, and I read on the forums here that when TomTom is installed, it overwrites some of the Bluetooth "driver" files, which effectively stops them working on the HD2.
The solution was either to replace the files (which I did), or delete them and do a soft-reset (so that Windows recreated the files on boot up).
If this isn't the case, a similar solution may work however.
I'm using the NexusHD2-ICS-4.0.4-CM9-HWA v2.0 ROM on my HTC HD2. But since i've switched to ICS my car kit doesn't recognize my phone anymore.
I have a Volkswagen Passat with a RNS315 navigation system and Bluetooth Premium.
I could connect my phone to my carkit by installing Gingerbread, pairing the phone and install ICS, but since v2.1 and higher my carkit doesn't find the phone anymore (probably because the MAC address for bluetooth has changed). When I make the phone visible and do a search for mobile phones I get the message that no compatible phone has been found. Though it does still recognize the phone as a Media Player. Does anyone has any ideas to make this work? Especially v2.3 of the NexusHD ROM is really interesting now since mute is working!
Thanks in advance.
Regards,
Patrick
Starting from ICS, Android no longer supports rSAP protocol (only HFP). Your car kit probably does not support HFP protocol and this is why it is not finding the phone.
Thankfully, there is an app on play store that adds the support back.
First install "Bluetooth SIM Access Install", then "Bluetooth SIM Access (Trial)" or Full version (paid). You can also see instructions on their website: http://www.android-rsap.com
After installing the trial version, my Skoda GSM II car kit (probably same as yours VW) finally recognized HD2 with Paranoid 1.1a ROM.
Maybe you could drive to the nearest dealer, and ask for an update of your carkit system. It would be pretty lame if VW doesn't support Android 4.0.
I'll try to connect the phone using the rsap app. The weird thing is that once it's paired using Gingerbread and then installing Android 4, it still connects. (With the older ROM version though, not with the newer anymore). I don't know if it is the ROM, or if it is ICS.
So I'll try to connect using rsap, and if that doesn't work I'll visit the dealer. Thanks for your replies. I'll let you know the outcome.
I've installed the rSAP app on my phone. Now the carkit indicates I have a premium Bluetooth connection and I get additional functionality. But if I try to find the phone it still indicates that no compatible phone can be found. It must be something else. I'll call the dealer to ask if they have an update..
Btw, I've found the following note in the ROM thread, so I guess it's a general problem: http://forum.xda-developers.com/showthread.php?p=27533851&highlight=vw#post27533851
Have you tried to find the car kit from the phone? This is what I did and it worked for me.
In order to do it I had to first make the car kit discoverable. It was only possible when I've connected another Android 2.2 phone, then the car kit showed an additional menu item to set BT visibility. Then I was able to find it on my HD2 and make a pair.
Sqter said:
Have you tried to find the car kit from the phone? This is what I did and it worked for me.
In order to do it I had to first make the car kit discoverable. It was only possible when I've connected another Android 2.2 phone, then the car kit showed an additional menu item to set BT visibility. Then I was able to find it on my HD2 and make a pair.
Click to expand...
Click to collapse
Hi Sqter,
Yes, I've tried that. I can pair with my carkit then, but it will only see the phone as Media Player, not as phone.
In two weeks I will go to the garage for a software update, hope that it will bring some solution. The current ROM i use (NexusHD2-ICS-CM9-HWA V2.0) works with the carkit, but as soon as I upgrade to a later version ([9.Jun.2012] NexusHD2-ICS-4.0.4-CM9-HWA V2.3), the carkit stops recognizing the phone as a phone..
When I read it the ROM's thread that the phone bluetooth doesn't manifest itself as phone, I think that's a good possibility and I hope that Tytung has time to look into that.
I found the following:
Thanks for this great ROM. However after a clean install of the latest version (I was using version 2.0 before) I could not connect my phone to my Skoda Amundsen carkit. It only recognises the phone as mediaplayer but not as a phone. After searching the internet for a solution I found the following:
The bluetooth configuration is written by ICS in /data/misc/bluetoothd/<device MAC>/config
When you replace the line "class 0x5a0000" by "class 0x5a020c" with a root shell, and rebooted the phone the phone is recognized as a phone.
After applying this setting I found my phone could indeed connect to the carkit and everything works fine.Could you please replace the bluetooth config file in new versions of your ROM?
This works for me!!!!!
I used the terminal emulator. Typed in "su" to get super user access browsed to the directory and edited the file with vi. (vi -> e, browse to line, adjust class to 0x5a020c -> ESC -> :wq. Rebooted the phone. Now the carkit does recognize the phone.
Thanks for your finding. I will also try it out - it seems to be easier solution than the one I had found.
Workaround
Try to edit /data/misc/bluetoothd/<device MAC>/config and replace the line "class 0x5a0000" by "class 0x5a020c" with a root shell
Reboot and enjoy!
This file is generated by ICS at the first boot , but i do note know how...
Workaround
patrickvdw said:
I found the following:
Thanks for this great ROM. However after a clean install of the latest version (I was using version 2.0 before) I could not connect my phone to my Skoda Amundsen carkit. It only recognises the phone as mediaplayer but not as a phone. After searching the internet for a solution I found the following:
The bluetooth configuration is written by ICS in /data/misc/bluetoothd/<device MAC>/config
When you replace the line "class 0x5a0000" by "class 0x5a020c" with a root shell, and rebooted the phone the phone is recognized as a phone.
After applying this setting I found my phone could indeed connect to the carkit and everything works fine.Could you please replace the bluetooth config file in new versions of your ROM?
This works for me!!!!!
I used the terminal emulator. Typed in "su" to get super user access browsed to the directory and edited the file with vi. (vi -> e, browse to line, adjust class to 0x5a020c -> ESC -> :wq. Rebooted the phone. Now the carkit does recognize the phone.
Click to expand...
Click to collapse
I think you found my post on forum.android-rsap.com/viewtopic.php?f=10&t=347&start=20
patrickvdw said:
I found the following:
Thanks for this great ROM. However after a clean install of the latest version (I was using version 2.0 before) I could not connect my phone to my Skoda Amundsen carkit. It only recognises the phone as mediaplayer but not as a phone. After searching the internet for a solution I found the following:
The bluetooth configuration is written by ICS in /data/misc/bluetoothd/<device MAC>/config
When you replace the line "class 0x5a0000" by "class 0x5a020c" with a root shell, and rebooted the phone the phone is recognized as a phone.
After applying this setting I found my phone could indeed connect to the carkit and everything works fine.Could you please replace the bluetooth config file in new versions of your ROM?
This works for me!!!!!
I used the terminal emulator. Typed in "su" to get super user access browsed to the directory and edited the file with vi. (vi -> e, browse to line, adjust class to 0x5a020c -> ESC -> :wq. Rebooted the phone. Now the carkit does recognize the phone.
Click to expand...
Click to collapse
Worked for me! Thank you very much, was desperately searching for a solution for hours now.