Database Users

[Q] Streaming audio via Bluetooth

Hi all, need a bit of assistance if you would...
I have recently bought a Vega, it is the stock 1.08 ROM which I have side-loaded Market etc onto... (had issues trying to flash custom ROM, but thats another story...)
My problem is when it comes to streaming audio via Bluetooth to my Samsung Home Theatre. The Vega discovers, pairs and connects successfully but only plays 2 seconds of music before disconnecting. I have tested the Home Theatre with my X10 and it works flawlessly so I know its not a problem with the equipment but the Vega.
Has anyone else encountered a similar problem and found a solution? Or could you point me in the right direction?
Thanks in advance!
Paul

Alright... so I've been doing a bit more searching and found an app called "Bluetooth Fix Repair". Dunno if it will work or not, but I searched the Market for it - only the donate version appears when searching on the Vega - strange... Found it alright on my X10.
So, can anyone upload the apk so I can sideload it to the Vega - or tell me where to find the apk on my X10. I thought it was in /system/app but I'm either not 100% of the apk filename, or it's not there...

Here you go!
If you apply the fix from my rom add-on thread it will show in the market
Here: http://forum.xda-developers.com/showthread.php?t=931337

Good luck with it!
Any help you need with that app, feel free to bother me
Cheers,
Phk

Thanks for your replies guys. I tried the bluetooth fix app, and it did improve the connectivity slightly - music played for about 4 seconds, stopped, played again for another few seconds then disconnected totally... arrrgghh!
So... possibly an issue with the ROM? Might need to wait for an update from Advent. Disappointing as I was hoping to show off my tablet for an upcoming party, but starting to look like my X10 will have to run the show instead!
Thanks again - if you have any other ideas, please feel free to fire them at me! (And I'll apply your patch for the Market later on, o-gman, thanks for that)

Damn.... I wish I had a tablet!
If you ran my bluetooth fix repair app, and then repaired, and then lost connection indefinitely..... The problem is with your ROM.
I made that program when i was on 2.1 and 2.2.. Now i'm running 2.3.1 and I don't need my app anymore. Also, when my app fixes the problem, it's only a temporary "dirty hack", so the problem will manifest itself again.
Sorry for not being able to fix it, but the problem remains in the blued.apk and bluetooth stack apk. It should be easy to change your bluetooth stack version, but i just can't make a program that calculates a version for each rom.
You should try (with a deodexed rom) to replace all bluetooth files from an earlier or newer rom.
Good luck mate,
Phk

Phk said:
... You should try (with a deodexed rom) to replace all bluetooth files from an earlier or newer rom...
Click to expand...
Click to collapse
Thanks Phk - while I understand, essentially, what you mean by installing the Bluetooth stack from another ROM - going about it is another matter. Would that be a difficult procedure? Can I rip the Bluetooth files from my X10, for instance?

Hi,
Two important things:
1) You shouldn't do it. It's complicated!
2) I can't help you all the way because we're not on the same HW\ROM
It really depends on how the stock roms for that device are released.
In my example, i have a Samsung Galaxy S GT-I9000 and Samsung's ROM are VFAT isos packed into Samsung's RFS containers, which means i can change my rom completely and then reflash it.
The particular apk files you need to test are everything you can find with:
"find -name *blue*apk"
from your "/" dir.
Anyway, first things first: You need to find a ROM that has bluetooth working! Then you will rip that ROMs bluetooth stack apks..
Sorry for not being able to fully help.
Regards,
Artur

Phk said:
... You shouldn't do it. It's complicated! ...
Click to expand...
Click to collapse
Says it all really! haha - I won't go messing about with the Bluetooth stack then, just in case I mess it up even more. Maybe the next update from Advent will cure my problem (whenever that may be...)
Thanks anyway guys!

[Q] Blu Studio 5.0 ii d532u ROM!

somebody know a good rom for BLU STUDIO 5.0 ii D532U?
I need one because it restart all times...

andr3marin said:
somebody know a good rom for BLU STUDIO 5.0 ii D532U?
I need one because it restart all times...
Click to expand...
Click to collapse
Have you found anything? I just ordered one for my wife. I was hoping kitkat update existed.
I bought a 5.0S II but it's not compatible with wind mobile, so I returned it and bought Blu Studio 5.0 II but can't seem to find the kitkat update...

i didn't found anything
please help.

andr3marin said:
i didn't found anything
please help.
Click to expand...
Click to collapse
Don't hold you breath. The non-existent support at Blu will ask you to reboot your device first. As if it has anything to do with it. Then they will tell you how important your business is to them, but that there's no plan on upgrading the OS of this device.
So I would suggest that all owners of Blu devices somewhat recent, ask for a 4.4.4 update. I hope this works for you in a near future.
[email protected]
Cheers and good luck.

andr3marin said:
somebody know a good rom for BLU STUDIO 5.0 ii D532U?
I need one because it restart all times...
Click to expand...
Click to collapse
There is some time that I'm searching for a ROM for this smartphone, but I did'n found any. I think that if you format your phone the problem will be resolved, make a backup before this. Sorry some error in my english, I don't speak very well

Xtrons tda696a

Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please

compbuilds said:
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
Click to expand...
Click to collapse
hello, I have your stereo itself, how did you get the root ??
Inviato dal mio D6503 utilizzando Tapatalk

compbuilds said:
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
Click to expand...
Click to collapse
I just installed this, http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068 and it all works beautifully !! does not change the MCU !!

skizzo_d said:
I just installed this, http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068 and it all works beautifully !! does not change the MCU !!
Click to expand...
Click to collapse
Hi Glad you managed to get it sorted out.
For root I used the a password which I found on here,but after looking for it again I cant find the thread.
Root gave me the abd shell and then I installed super user.
Reboot and installed root checker to confirm.
Pleased you managed to flash yours but which ver from the link did you use
Did you use the one for 800x480 or can you give the link directly to the download.
I just want to make sure that I install the correct one with no mistakes
Are these the download that you used dated sept 2015??
Download 800X480 with NEXT Launcher: https://yadi.sk/d/AAqeafAvixzHp
Download 800X480 with regular launcher: https://yadi.sk/d/UFXsA6pLixBoq
Thanks

compbuilds said:
Hi all,
Ive got an xtrons tda696 with android 4.4.4_22072015
I have root access but wanted to check if there is any firmware or roms I can use.
chip is the rk3188 and mcu is MTCB-HZC-V2.69
Ive looked at all the roms and firmware here but the mcu doesn't appear to be listed.
Any help or suggestions please
Click to expand...
Click to collapse
compbuilds said:
Hi Glad you managed to get it sorted out.
For root I used the a password which I found on here,but after looking for it again I cant find the thread.
Root gave me the abd shell and then I installed super user.
Reboot and installed root checker to confirm.
Pleased you managed to flash yours but which ver from the link did you use
Did you use the one for 800x480 or can you give the link directly to the download.
I just want to make sure that I install the correct one with no mistakes
Are these the download that you used dated sept 2015??
Download 800X480 with NEXT Launcher: https://yadi.sk/d/AAqeafAvixzHp
Download 800X480 with regular launcher: https://yadi.sk/d/UFXsA6pLixBoq
Thanks
Click to expand...
Click to collapse
yes, 800x480, extract the file "update.iso" and put it in sd_GPS and in settings / system information, updates. after upgrading to Android, restore factory settings and erases data

skizzo_d said:
yes, 800x480, extract the file "update.iso" and put it in sd_GPS and in settings / system information, updates. after upgrading to Android, restore factory settings and erases data
Click to expand...
Click to collapse
Have you found any issue's or problems with the firmware as we seem to be the only users who have this unit.
Also what did you use to make a backup
Thanks for your help

All installed and up and running thanks
But have a problem Lost my 16gig nandflash though.
Any help on this one please

compbuilds said:
All installed and up and running thanks
But have a problem Lost my 16gig nandflash though.
Any help on this one please
Click to expand...
Click to collapse
what does it mean? you lost files? or memory is smaller? or do not see it right ?? did you do the factory reset ??
Inviato dal mio D6503 utilizzando Tapatalk

skizzo_d said:
what does it mean? you lost files? or memory is smaller? or do not see it right ?? did you do the factory reset ??
Inviato dal mio D6503 utilizzando Tapatalk
Click to expand...
Click to collapse
Hi again.
flash memory had increased form 1 to 2 gig as expected but the memory in the unit is 16gig was no longer showing or accessible.
Also yes after flash I did factory reset.
So what I have done now is reflash the unit again but used the rom with next launcher built in and then factory reset.
Full memory is now visible and usable.
I have noticed that my obd software will not find the blooth elm even though it is paired, I will have a play around with today to see if I can find the problem.
Also did you make a note of your units factory settings?? Maybe that could be the Bluetooth issue with obd.
Thanks again and I'm glad somebody else has the same unit as me so now I don't feel alone

https://drive.google.com/folder/d/0B1BfJCD_1o9Gd2VNYzdVVHhiWnc/edit

skizzo_d said:
https://drive.google.com/folder/d/0B1BfJCD_1o9Gd2VNYzdVVHhiWnc/edit
Click to expand...
Click to collapse
Many thanks
I took pictures myself of all other settings but forgot about the factory settings.
Because it seems we are the only two that has the unit so far what do you think about it.
I changed from a pioneer appradio to have this instead.
So far I don't regret the choice

I feel too late to find this thread but...
Don't flash Malaysk ROM on Xtrons HU with MTCB-HZC.
Obviously they have fatal issue at screen backlight.
I confirmed same issue on TD696A and TD101A both of them.

Dear Users,
I have an Xtrons TD696A MTCB-HZC-v2.65 with current buildnumber rk3188-eng.4.4.4 22102015.20.28.27.
I'd like to install the Malaysk image on my unit but before I do this I would like to know a few things:
1). First I have to get root access on my device and install the application SuperSU (I have managed to do this)
2). After that I have to create a back-up but which application is the best to do this?
I have tried nandroid but it gives me an error 127.
Changing the shell did not make any difference.
Do I have to install busy box for this?
I have also red that making a back-up of a device is normaly done by booting the device with a rom manager.
But which rom manager could I youse for my Xtrons unit?
3). Could I install update_4_4_4_FUSE_800X480_RK3188_15_MAL_23_04_2016.rar on this unit?
After expanding the rar file I have red the readme file but I'm not sure which method is the best method to choose:
* Installing from the system
* Installing from Recovery
4). Are there any other steps that I have to make or have to know or do before I'm going to flash my unit?
Please help me so I could use the incredible Malaysk rom.
Kind regards,
Kenneth de Vries

Help with rooting YT9216BJ_00012_V001

I have a head unit that says it's running android 10.1. I want to know if this unit can be rooted and a new ROM flashed to the unit. I have a couple pictures to help anyone that knows more about this stuff than I do.
I don't have a working laptop right now (the one I have the screen got busted), but I have a tablet. Can I use the tablet to do a root on the head unit or does it have to be a computer/laptop?

YT9216BJ-Rooted
https://disk.yandex.ru/d/fHhJyNp6coCX3A

localos said:
YT9216BJ-Rooted
https://disk.yandex.ru/d/fHhJyNp6coCX3A
Click to expand...
Click to collapse
My Russian is piss poor lol.

I need to help with root my android radio too. But this link isn't working anymore. Someone know how to do this?

Cant connect bluetooth after upgrading my samsung to android 13. What is best firmware for me to upgrade to?

Cant connect bluetooth after upgrading my samsung to android 13. What is best firmware for me to upgrade to?. Please help!! My player finds phone and phone player but cant connect so cant stream music longer from that phone

DanielK77 said:
Cant connect bluetooth after upgrading my samsung to android 13. What is best firmware for me to upgrade to?. Please help!! My player finds phone and phone player but cant connect so cant stream music longer from that phone
Click to expand...
Click to collapse
You just need to search for S32F0 (this is your MCU version) in this forum.
Give it a try. At least https://forum.xda-developers.com/t/...-px5-mcu-s32f0-rk3368-with-android-9.4194651/ could be found on first position.
BTW: Your pictures from Device Info do not help. Important are always just the picture from MCU and Firmware version.

rigattoni said:
You just need to search for S32F0 (this is your MCU version) in this forum.
Give it a try. At least https://forum.xda-developers.com/t/...-px5-mcu-s32f0-rk3368-with-android-9.4194651/ could be found on first position.
BTW: Your pictures from Device Info do not help. Important are always just the picture from MCU and Firmware version.
Click to expand...
Click to collapse
Now i think the only picture that matters is in thread. I maied the guy that thid this firmware that you say to try. He i russian so i dont want to install if i cant get hold of him becouse i must pay to get full version

DanielK77 said:
Now i think the only picture that matters is in thread. I maied the guy that thid this firmware that you say to try. He i russian so i dont want to install if i cant get hold of him becouse i must pay to get full version
Click to expand...
Click to collapse
Just post your question in this thread. There are a lot of user who can support you.
Yes, Malaysk is Russian, but what is your problem with it? Nevertheless you can try the free version first if this fixes your issues and then decide without pressure if you buy this firmware.

rigattoni said:
Just post your question in this thread. There are a lot of user who can support you.
Yes, Malaysk is Russian, but what is your problem with it? Nevertheless you can try the free version first if this fixes your issues and then decide without pressure if you buy this firmware.
Click to expand...
Click to collapse
I have no problem that he is russian but if i want to get full version i must know that he is able to get my mail to activate full version.
Is malaymod better then Hal9k or are they simular?

This is not a radio software problem but a bug in Samsung's Android 13 for Galaxy s21.
Summary of my adventures with the S21 update to Android 13. HOWEVER, SAMSUNG ****ED SOMETHING WITH BLUETOOTH IN A13, maybe it will be helpful to someone. But in turn: after updating the S21 to A13, the phone stopped connecting to the Android radio in the car. The devices saw each other but did not connect. Restarting devices, turning off/on BT, resetting network settings and here and here didn't help. Restoring the S21 to factory settings also did not help, as well as flashing Android 13 to the S21. All that was left was to restore to mouth. factory radio in the car but here is a complete disappointment: they see each other but still do not connect I was nervous to the max, I quickly downloaded the previous Android 12 soft on S21 and ? And voila: there is a BT connection, everything works as before !!! Thank you for your attention.