bricked? - Droid RAZR M Q&A, Help & Troubleshooting

i recently installed safgestrap 3.12 and thought i'd try to install a custom rom.
i wiped cache and dalvic then wiped system.
now all i get after a brief splash screen is "ap fastboot flash mode (s) blah blah, failed to hab check for boot:q56 fastboot reason: boot failure"
i've tried installing roms and updates from the stock recovery but no joy.
am i screwed?

Have you activated a custom slot in safe strap? You will need to set the amount of memory to use for your ROM based from within your internal storage drive.

No, I did this over the stock Rom slot.
Sent from my HTC Sensation Z710e using Tapatalk 2

betty.k said:
No, I did this over the stock Rom slot.
Sent from my HTC Sensation Z710e using Tapatalk 2
Click to expand...
Click to collapse
Like you said, you wiped system on stock slot, so you should try rsdlite to flash back the rom by fastboot mode
Sent from my DROID RAZR HD using xda app-developers app

Related

Clockwork recovery mod not working

After I updated clockwork to 5.0 I can no longer boot in to the recovery backup my system or install roms it only boots to stock recovery with white back ground
Sent from my HTC Glacier using xda premium
have you tried reflashing it through ROM manager?
if that doesn't work, flash it manually using adb.
Turn off fast boot? Reinstall the recovery?
Sent from my HTC Glacier using XDA App
Use the file in this thread to reflash the recovery. Rom manager doesn't truly flash the recovery but this will.
http://forum.xda-developers.com/showthread.php?t=1200147

Can't boot my note

I flash the German jelly bean firmware through mobile Odin. When I first booted it all I see is a black screen. I went to go back to stock through desktop Odin but now my computer won't read it. Odin stops at NAND Write Start!!. Can somebody help me please?
Sent from my ADR6410LVW using xda app-developers app
88VDUB said:
I flash the German jelly bean firmware through mobile Odin. When I first booted it all I see is a black screen. I went to go back to stock through desktop Odin but now my computer won't read it. Odin stops at NAND Write Start!!. Can somebody help me please?
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
If you have CWM , go to wipe data/factroy reset, wipe cache & dalvik & reboot.
Tried that samething happens. I hear boot sound but screen is black. I can flask recovery through Odin but won't let me flash any firmware.
Sent from my ADR6410LVW using xda app-developers app
88VDUB said:
Tried that samething happens. I hear boot sound but screen is black. I can flask recovery through Odin but won't let me flash any firmware.
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
try to flash back ICS rom, if not search far a 3 parts rom to flash it through odin PDA, PHONE & CSC .
What I don't get is that I can't flash stock roms through Odin but everything else can be flashed stock recovery, custom recovery, stock kernel just not stock roms very strange.
Sent from my ADR6410LVW using xda app-developers app
88VDUB said:
What I don't get is that I can't flash stock roms through Odin but everything else can be flashed stock recovery, custom recovery, stock kernel just not stock roms very strange.
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
If you can flash stock recovery , boot into it & wipe data & reboot.
CWM FIX
lsherif said:
try to flash back ICS rom, if not search far a 3 parts rom to flash it through odin PDA, PHONE & CSC .
Click to expand...
Click to collapse
Had the same problem over the past 24hrs
(I have a GT-N8013 with stock ICS firmware root injected installed, when I went to check if a JB update had come out it didn't recognize the stock root injected firmware as stock and proceeded to try and install ICS without root through TWRP and continued to loop through recovery and installation.. unsuccessfully)
I am now posting this from the GT-N8013 so here's how to do it:
1) Use ODIN to flash CWM (Google them if you don't know what they are. I am new and cant post links yet)
2) Boot Your Note 10.1 into recovery by holding down Volume Up and Power, wait until the samsung logo shows up twice, then release the power button and you should end up in recovery.
3) Wipe Data/Factory Reset
4) Clear Cache
5) Advanced/Wipe Dalvik Cache
-Repeat Steps 3-5 twice (three times total)
6) Reboot and voila! You are back to your original rom all nice and neat.
Tried that as well no go still goes to black screen after the screen that says Samsung galaxy note 10.1. I hear boot sound but Samsung doesn't show up just blank screen.
Sent from my ADR6410LVW using xda app-developers app
Ok got it. The firmware I had was a bad file.
Sent from my ADR6410LVW using xda app-developers app

[Q] Q Any way to help? ZTE Blade bricked

Hi all. Sorry fo my bad English - I'm russian.
Ok, I have a bricked ZTE Blade - GEN2, China 256Mb RAM.
I've read this topic modaco com/topic/343587-guide-de-bricking-a-zte-blade/
I have some problems, thats why I'm asking for some help.
1) I've used Method 5: The dodgy ZTE firmware flasher
At the point Flash Firmware - 6)When finished it should boot into FTM mode. - but it doesn't.
I've took out the battary, and rebooted my phone in the FTM-mode. Succesfully restored IMEI (got no errors).
And then:
Put clockworkmod in the recovery partition
Take out the battery and turn on the phone. Clockworkmod should load
There is no ClockWork! Only FTM...
Installed ClockWork via cmd script. It has loaded, but here is the next problem:
"You can now flash a ROM"
I've tried to flash Swedish_Spring_RLS5. So I mounted system and data.
Installation ok, but if i reboot i get clockwork.
Tried to flash image.bin from zte-website. If i reboot after the installation i get clockwork.
Tried to get stock recovery. Installed it via cmd script, but it doesn't load.
I get FTM-mode.
There is no phone-workshop in my city, and I have no more warranty for this smartphone, so i hope you can help me. Thanks.
At the beggining the problem was - the boot was down. The splash appeares, slides to right, the phone reboots.
Try reflashing clockworkmod and do a full wipe.
It might also help if you format system.
Sent from my GT-I9300 using xda premium
doesn't helped
Ok, reinstalled cwm, have done all wipes, formatted system,data.
Tried to flash.
Nothing. Reboot => CWM
Does the rom flash process success?
Try flashing another rom.
Sent from my GT-I9300 using xda premium
yes
yes, it does. i get no errors, and
there are files in the system partiton.
when i make a backup i see all the files from the os.
have tried. cm7, cm9, other stock: 2.1, 2.3 - every gives the same result - only cwm is loading.
when i flash the stock recovery - then i get only ftm on load.
is my phone totally bricked? i hope there is a way to restore...
It's semi-bricked. You could try to flash stock rom with ftm and root it with z4root.
Sent from my GT-I9300 using xda premium
ok
ok. i will try P729J_2GW900V2.2.0B01-NO_RECOVERY-update_signed.zip
will update this message when done.
--- upd
tried:
1) china tpt's
2) all wipes and formats
3) all mounts + flashing Swedish_Spring_RLS5
4) boot.img via adb
result: ANDROID Loaded, but the hardware keys are not working... UrbanDrawer, any ideas?
Just reflash rom and wipe data.
If the problem didn't get fixed, flash another rom.
Sent from my GT-I9300 using xda premium
no success
Flashed a stock China ROM.
No success. Boot info FTM. No way to boot the system...
Tried another ROM's for 512Mb models - same result: FTM-mode :crying:
Any other ideas?
UrbanDrawer said:
Try to flash stock rom with ftm and root it with z4root.
Click to expand...
Click to collapse
Before doing this, you could also hard reset the phone, that way there's not going to be any software-related problems.
Sent from my GT-I9300 using xda premium
what i do
Ok. What i do.
1) Launch ZTE Flasher, swich my phone into download mode (vol+/vol-/power)
2) Flash IT (China v880 Firmware)
3) When finished - release battery.
Turn on and get FTM-mode, no clockword or smth. else. Only FTM.
4) TPT's : China v880 GEN2 TPT's.
When finished - the phone doe's not reboot. Need to release the battery, and to power on.
5) Oh my God! Yellow CWM!!! :laugh:
I mount data,system.
All wipes.
Format all, except SD.
6) Flashing ROM.
7) Reboot.
After the reboot I get CWM (on stock rom's) or FTM (after CM).
What am I doing wrong?
Try method 1.
http://www.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Sent from my GT-I9300 using xda premium
cwn
No chance. CWM loading. No ROM
Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium
UrbanDrawer said:
Did you format boot, system, data, cache, and sd-ext?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Sure. I did!

Wont Flash anything IN TWRP and CWM

HTC Glacier is rooted running on stock 2.2.1 and unlocked the bootloader and flashed eng bootloader and s off and running TWRP recovery but everytime that i try to flash a rom TWRP verifys the flash and i hit reboot then im just stuck at boot loop for the rom then i try to flash the nandroid backup that i made before that and it will flash but ill just get bootloop so i have to flash the PD15IMG.zip and thats the only thing that I can flash
Ive tryed with TWRP and CWM most recent updated versions of the two
wizbo27 said:
HTC Glacier is rooted running on stock 2.2.1 and unlocked the bootloader and flashed eng bootloader and s off and running TWRP recovery but everytime that i try to flash a rom TWRP verifys the flash and i hit reboot then im just stuck at boot loop for the rom then i try to flash the nandroid backup that i made before that and it will flash but ill just get bootloop so i have to flash the PD15IMG.zip and thats the only thing that I can flash
Ive tryed with TWRP and CWM most recent updated versions of the two
Click to expand...
Click to collapse
Do you wipe data/cache and do a factory reset before flashing new rom? For me, it get stuck at boot screen if I flash a new rom without wiping.
Wiping data and factory reset is so important. When I tried to flash my first ROM it also got stuck. Try using 4ext instead of twrp.
Sent from my myTouch 4g using xda app-developers app
I tried that and still got stuck
I even wiped system and this his coming from stock
Sent from my Amazon Kindle Fire using xda app-developers app
wizbo27 said:
I tried that and still got stuck
I even wiped system and this his coming from stock
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Naaa. Did you wipe everything?
Sent from my MyTouch 4G using xda app-developers app
I wiped everything cache delvik and system still just loops when I flash roms
maybe its the eng-hboot ?
wizbo27 said:
I wiped everything cache delvik and system still just loops when I flash roms
maybe its the eng-hboot ?
Click to expand...
Click to collapse
There are several more partitions than the ones you listed. Try a different recovery. If that doesnt work, you might return to stock Froyo and try rooting again the right way. I think the problem stems from the method you used to get get the engineering bootloader installed. It will always show S-Off, regardless of the state of the flag. It's possible that because you started off by going through HTC Dev that something is off. In fact, as a test, try flashing your boot.img separately through fastboot and see if it boots.
I tried that and it didn't work even when I relocked the boot loader from the HTC dev site and switched the eng boot.IMG to an updated one and got s off with gfree it boot froyo but would boot any ROM that I flashed with cwm and twrp still yet to try 4ext can't find the file for glacier specifically
Sent from my Amazon Kindle Fire using xda app-developers app
wizbo27 said:
I tried that and it didn't work even when I relocked the boot loader from the HTC dev site and switched the eng boot.IMG to an updated one and got s off with gfree it boot froyo but would boot any ROM that I flashed with cwm and twrp still yet to try 4ext can't find the file for glacier specifically
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Try 4EXT, it it may fix the problem. Heres a link to the APK. It will install the recovery itself after you install the apk, open it, and click install or whatever it is.
Link for the apk is here --->http://www.4ext.net/get.php?apk
Or you could get it from the google store.
N_otori0us_ said:
Try 4EXT, it it may fix the problem. Heres a link to the APK. It will install the recovery itself after you install the apk, open it, and click install or whatever it is.
Link for the apk is here --->http://www.4ext.net/get.php?apk
Or you could get it from the google store.
Click to expand...
Click to collapse
you wouldnt happen to have the actual .img file would you ?
wizbo27 said:
you wouldnt happen to have the actual .img file would you ?
Click to expand...
Click to collapse
Nope. Don't worry though. The app takes care of everything.
Sent from my MyTouch 4G using xda app-developers app
N_otori0us_ said:
Nope. Don't worry though. The app takes care of everything.
Sent from my MyTouch 4G using xda app-developers app
Click to expand...
Click to collapse
I think he means that he requires the .img because he cannot boot into the OS to run the .apk on his phone.
If it is inappropriate to post a link to this file, I apologize in advance. It is FREE and I take no credit for creating any part of EXT4 Recovery.
wizbo27 said:
you wouldnt happen to have the actual .img file would you ?
Click to expand...
Click to collapse
Here is ver. 1.0.0.5 RC8 downloaded from the 4EXT Updater App for my HTC Glacier/myTouch 4G.
http://d-h.st/Wcm
Problem solved the problem was because the sd-ext wasnt getting wiped and 4ext allowed me to do it now i flashed cm10.1 albinoman jb 4.2.2 and it works like a charm thanks for the link to the .img file
wizbo27 said:
Problem solved the problem was because the sd-ext wasnt getting wiped and 4ext allowed me to do it now i flashed cm10.1 albinoman jb 4.2.2 and it works like a charm thanks for the link to the .img file
Click to expand...
Click to collapse
You're quite welcome! I'm glad you can boot again.
Thanks for the thanks.

Help!!! My s4 has partition data corrupted

After flashing crash v10 then use wanam exposed ( framework and modules added ) i restarted my phone and then i got an issue: i can't boot to androidOS. it said: the partition data has been corrupted and asked me to factory reset and have a reset button. i've already use that button. flashing another rom ( including stock ) but it no use. can another help me plz
Just flash a stock rom via odin, or a custom rom via recovery.
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
Just flash a stock rom via odin, or a custom rom via recovery.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
i have do it alr. nothing change
thanhtuan said:
i have do it alr. nothing change
Click to expand...
Click to collapse
Flash custom recovery like Philz.
Boot to recovery and format data, cache,system.
Now you should have a clean base to flash a ROM on

Categories

Resources