Database Users

[Q] Alternative ways to turn screen on/off

Hi all,
I'm wondering if there's any alternative ways to put the Nexus 7 (or any Android device I guess) to sleep/wake it up. I'm thinking something along the lines of an app that forces the touch screen to stay active but turns the display off so you can use touch input to activate wake/sleep.
Might be a bit of a stupid question. The reason I ask is because my N7 is mounted in my car and the power button isn't easily accessible.
Cheers for any tips..

UnitedWeFall said:
Hi all,
I'm wondering if there's any alternative ways to put the Nexus 7 (or any Android device I guess) to sleep/wake it up. I'm thinking something along the lines of an app that forces the touch screen to stay active but turns the display off so you can use touch input to activate wake/sleep.
Might be a bit of a stupid question. The reason I ask is because my N7 is mounted in my car and the power button isn't easily accessible.
Cheers for any tips..
Click to expand...
Click to collapse
Not sure if this helps but I have a case that I bought for my N7 and when I open it and close it the screen turns on and off.
Here it is http://www.amazon.com/gp/product/B0...ASIN=B008D2POAS&linkCode=as2&tag=newyormus-20

MineralGray02K said:
Not sure if this helps but I have a case that I bought for my N7 and when I open it and close it the screen turns on and off.
Here it is http://www.amazon.com/gp/product/B0...ASIN=B008D2POAS&linkCode=as2&tag=newyormus-20
Click to expand...
Click to collapse
Thanks for that but nah, it's mounted in my car dash so a case won't fit..
But that give me an idea.. does sliding a magnet across a specific point on the screen turn it on/off? That's the idea with the smart cases right?

UnitedWeFall said:
Thanks for that but nah, it's mounted in my car dash so a case won't fit..
But that give me an idea.. does sliding a magnet across a specific point on the screen turn it on/off? That's the idea with the smart cases right?
Click to expand...
Click to collapse
Yes,
The magnet is somewhere to the bottom left of the device (i would say to about a quarter from bottom up and on the black contour) . If you can add an sliding magnet (make sure is weak) then you can lock/unlock screen.

Nfc tags dude i wonder if they would work
Sent from my Nexus 7 using Tapatalk 2

I know some kernels can enable touch wake. I imagine it can incorporated soon. On my Galaxy Nexus, there's an app I downloaded that allowed a specific screen swipe to wake the screen.
Sent from my Galaxy Nexus using Tapatalk 2

wyattyoss said:
On my Galaxy Nexus, there's an app I downloaded that allowed a specific screen swipe to wake the screen.
Click to expand...
Click to collapse
What was the app?
Sent from the third Galaxy on the left.

That would be awesome. Do you remember the name of the app?

Gesture Control?

UnitedWeFall said:
Hi all,
I'm wondering if there's any alternative ways to put the Nexus 7 (or any Android device I guess) to sleep/wake it up. I'm thinking something along the lines of an app that forces the touch screen to stay active but turns the display off so you can use touch input to activate wake/sleep.
Might be a bit of a stupid question. The reason I ask is because my N7 is mounted in my car and the power button isn't easily accessible.
Cheers for any tips..
Click to expand...
Click to collapse
Hey man. I used to have an awesome app on my very first Android tab years ago. It would turn the screen completely black (via home screen or notification icon) without actually putting it to sleep. Because it wasn't really asleep, a double tab would turn the screen back on. I CANNOT FIND IT FOR THE LIFE OF ME! Anyway, after reading your question, I searched for an hour, because I could use something like this for my setup in my car.
So, I found something that turns the screen both on and off, and actually works on my N7. Search for Proximity Screen Off. I installed the free lite version, and it works. I found out the screen won't turn on though, unless you disable your lock screen. Play with the settings to your liking.
Oh, and since we don't have prox sensors, you can use your ambient light sensor. Good luck, lmk if it works for ya.

joelhon said:
What was the app?
Sent from the third Galaxy on the left.
Click to expand...
Click to collapse
It's called PGM Nexus. I almost don't want to give up my Galaxy Nexus (but I sadly still plan to) just because of this one app alone...it is so godawful nice to be able to swipe, or simply double tap the screen to fire up the screen. Unfortunately this app apparently requires some deep voodoo to work as its kernel related, and applies strictly to the Galaxy Nexus. I know a bunch of people have already started bugging the developer to make a version for the Nexus 7, I'd suggest piling on. :fingers-crossed:
It's apps like these that make you realize how superior the Nexus devices are at getting really good customized software over other devices.
I do wish there were some other options for the Nexus 7, like using the front camera as a proximity sensor of sorts to detect a handwave, or simply shaking the tablet.

jaycustom said:
Hey man. I used to have an awesome app on my very first Android tab years ago. It would turn the screen completely black (via home screen or notification icon) without actually putting it to sleep. Because it wasn't really asleep, a double tab would turn the screen back on. I CANNOT FIND IT FOR THE LIFE OF ME! Anyway, after reading your question, I searched for an hour, because I could use something like this for my setup in my car.
So, I found something that turns the screen both on and off, and actually works on my N7. Search for Proximity Screen Off. I installed the free lite version, and it works. I found out the screen won't turn on though, unless you disable your lock screen. Play with the settings to your liking.
Oh, and since we don't have prox sensors, you can use your ambient light sensor. Good luck, lmk if it works for ya.
Click to expand...
Click to collapse
Thanks for that! Appreciate it. I'll give it a try when I get home after work and report back.

jaycustom said:
Hey man. I used to have an awesome app on my very first Android tab years ago. It would turn the screen completely black (via home screen or notification icon) without actually putting it to sleep. Because it wasn't really asleep, a double tab would turn the screen back on. I CANNOT FIND IT FOR THE LIFE OF ME! Anyway, after reading your question, I searched for an hour, because I could use something like this for my setup in my car.
So, I found something that turns the screen both on and off, and actually works on my N7. Search for Proximity Screen Off. I installed the free lite version, and it works. I found out the screen won't turn on though, unless you disable your lock screen. Play with the settings to your liking.
Oh, and since we don't have prox sensors, you can use your ambient light sensor. Good luck, lmk if it works for ya.
Click to expand...
Click to collapse
Could you please post the settings you are using? Specifically the light sensor settings. I am having trouble getting this to work properly. Thanks!

Screen Off
gtdRR said:
Could you please post the settings you are using? Specifically the light sensor settings. I am having trouble getting this to work properly. Thanks!
Click to expand...
Click to collapse
Hello. I'm not sure if it helps you, but for turning off screen I use Nova Launcer (alternatively you could use Apex Launcher - as far as I remember, it has gestures in its free version) with Screen Off app by Katecca. I've set Nova Launcher to react to swiping up screen by executing Screen Off app. So I have to turn on screen by pressing button, but to turn off I just swipe up screen.
Best regards,
Artur

Added support for nexus 7 to ProximityScreenOffPro v6.0
https://play.google.com/store/apps/details?id=com.itsme4ucz.screenoffpro

Touch screen to wake

Hey guys, I noticed on the latest twrp recovery I can touch the screen to wake it.......
Is there a app that implements this in the os?
Sent from my Nexus 7 using XDA Premium HD app

At the moment...nope.
Sent from my Nexus 4 using Tapatalk 2

Looking for something like this myself, nexus is going mounted in car so I wont have access to the power button
So far i've seen shake to wake apps (obviously no good for a car)
proximity wake apps (nexus doesnt have a sensor)
and magnet to wake (would need to keep a little magnet in the car)
I've seen some kernals that enable touch screen to wake for other devices, anyone know of any that have it for the nexus or any other possible options for in car use.
screen always on looks like the only option at the moment. alternatively some fiddly wiring in a new button to the dash

Knock knock not as responsive waking up...

Sometimes I have to knock knock twice in a row to turn on the device. It works well turning off, but on half of the times it won't turn on. Gotta do it twice. Anyone else encounter this?
Sent from my LG-D803 using Tapatalk 4

Brava27 said:
Sometimes I have to knock knock twice in a row to turn on the device. It works well turning off, but on half of the times it won't turn on. Gotta do it twice. Anyone else encounter this?
Sent from my LG-D803 using Tapatalk 4
Click to expand...
Click to collapse
I do not have that issue, but I have read in a few posts that it can be dependent on where you are knocking on the screen.

hd-renegade said:
I do not have that issue, but I have read in a few posts that it can be dependent on where you are knocking on the screen.
Click to expand...
Click to collapse
Yes! Excellent advice
Sent from my LG-D803 using Tapatalk 4

Brava27 said:
Yes! Excellent advice
Sent from my LG-D803 using Tapatalk 4
Click to expand...
Click to collapse
I think the biggest issue is knock speed.... mine works damn near 100% when I slowed down some, and knock slower like it showes at the end of the G2 commercials....

I think it's partially related to the proximity sensor. There are times when I can't get the knock on to work at all and when I hit the power button the screen shuts right back off.
Usually a few swipes over the sensor makes it work again. Sometimes I'll go in and turn the Knock On gesture off and back on and then it seems to work great for a while too.

csmith8507 said:
I think it's partially related to the proximity sensor. There are times when I can't get the knock on to work at all and when I hit the power button the screen shuts right back off.
Usually a few swipes over the sensor makes it work again. Sometimes I'll go in and turn the Knock On gesture off and back on and then it seems to work great for a while too.
Click to expand...
Click to collapse
This is my exact problem. The phone just decides it doesn't want to wake up with knock-on...but after I press the power button, it only turns on for half a second and it's out again. I never tried swiping over the sensor, but hopefully it works because it's mighty annoying when it does it during a call!
I wonder if there's a fix for this?

canecbr600 said:
I think the biggest issue is knock speed.... mine works damn near 100% when I slowed down some, and knock slower like it showes at the end of the G2 commercials....
Click to expand...
Click to collapse
this, if you are trying to do it like you did on the nokia n9 or nokia 8800 then it won't work
slow deliberate knocks are the only way
waiting on the g2 to arrive, but on my review unit, knock knock wouldn't respond correctly if i left the phone on the table, but if i picked it up, it would work nothing scientific here just an experience of one person and one prototype

I had the same issue... What fixed it is: 1. I found that the screen protector was hindering it somewhat. 2. Go to settings->display->screen-off effect-> and change it to simple. This REALLY seemed to help. Let us know!

in_dmand said:
I had the same issue... What fixed it is: 1. I found that the screen protector was hindering it somewhat. 2. Go to settings->display->screen-off effect-> and change it to simple. This REALLY seemed to help. Let us know!
Click to expand...
Click to collapse
I did notice it does seem to behave better when set to simple for the screen off animation.
My screen protector does have a cutout around the sensors. Keeping the sensor area clean enough to qualify as having OCD does seem to make it work properly the first time, every time. Maybe it's overly sensitive?
Edit: Scratch that. 30 seconds later it's behaving erratically again. Maybe it's not the fact that it's clean, but the swiping over the sensor that temporarily resolves it.

it also seems to work much better when knocking at the top of the screen where the statusbar would be.

So I ended up swapping the phone out over the weekend for a new one and now everything seems to work just fine. Seems to indicate that it's not a software problem, but rather a hardware issue with the proximity sensor.

Guys if your covering the sensors when turing the device screen on it will turn right back of on you. It's a feature LG implemented so the device wouldnt wake up in your pockets. Don't cover the sensors.
Need a little example? Grab your phone and cover the sensors and knock knock knock.You can knock till the cows come home but it will not turn on. Same thing goes for the power button but its a little delayed and will turn the screen on for half a sec and turn right back off. Practice not to do this because your phone isn't broken. There is actually a thread on this deep in the forums somewhere but its been forgotten now.

Walter21026 said:
Guys if your covering the sensors when turing the device screen on it will turn right back of on you. It's a feature LG implemented so the device wouldnt wake up in your pockets. Don't cover the sensors.
Need a little example? Grab your phone and cover the sensors and knock knock knock.You can knock till the cows come home but it will not turn on. Same thing goes for the power button but its a little delayed and will turn the screen on for half a sec and turn right back off. Practice not to do this because your phone isn't broken. There is actually a thread on this deep in the forums somewhere but its been forgotten now.
Click to expand...
Click to collapse
This is true however there are indications of problems with the proximity sensor as well. Some of the devices are behaving as if tree sensor is covered even when it's not.

Walter21026 said:
Guys if your covering the sensors when turing the device screen on it will turn right back of on you. It's a feature LG implemented so the device wouldnt wake up in your pockets. Don't cover the sensors.
Need a little example? Grab your phone and cover the sensors and knock knock knock.You can knock till the cows come home but it will not turn on. Same thing goes for the power button but its a little delayed and will turn the screen on for half a sec and turn right back off. Practice not to do this because your phone isn't broken. There is actually a thread on this deep in the forums somewhere but its been forgotten now.
Click to expand...
Click to collapse
Thanks for this.. Very insightful.. I tried it immediately LOL

I had the same issue. I have no case or screen protector on, and was not covering the sensor when trying to wake the phone. For some reason though, knocking wouldn't wake the phone, and pressing the power button would only turn the screen on for a few seconds. I want even given enough time to get past the unlock screen. I went into the store and they are sending me a replacement that should come in later this week. It doesn't happen all the time. It is much more noticeable after receiving a call though.
Sent from my VS980 4G using Tapatalk

Definitely is dependent on the proximity sensor. If i just have my thumb on the edge of the phone by the sensor it will display this problem. Even with my finger a half to one inch above it will do this. I will be paying close attention to the proximity sensor from now on when it doesn't work. Still have a few days to return and thought i had an issue but maybe not.
Sent from my VS980 4G using xda app-developers app

sometimes its also greasy fingers, at least in my case, rarely though

As long as you tap twice the same place it's working fine. If distance between first and second tap is greater than 1 - 1.5 cm it won't work.

Got the same problem on my d802...when i left the phone on my table for 2-3min it wont wake up on first knock knock even power key wake it up for 1sec after auto turn off again....even with no screen protector....i noticed that sometimes there is a delay about 5-10sec after knock knock and screen turns on....other thing i noticed when i knock on immediently after turning off it works 100%....BUT i also noticed when i knock on after a while it turns on and i can unlock got vibration and sound of the unlock but i cant see anything. Screen looks like its off but when i look closely i can hardly see widgets and when i set effect to tv out i can see the effect by pressing the power button...when i press the power button again screen turns on like normal...i noticed sometimes on a rerboot the lg bootlogo disapears the led is working an showing all colors but the boot animation is gone like the screen is off at the bootup...dont know why after the bootup the pin lock screen is showing up normal....sorry for my english^^

[Q] Double Tap to Wake

I read in a review, but I can't recall, that the S5 has the same feature as the HTC M8 (One) that double tapping the screen wakes the phone.
I can't find out how to enable it.

See my thread, haha. The best buy demo unit was able to do it, but I cant figure it out on my phone to save my life.

If you go to Settings > Accessibility > Dexterity and Interaction > Enable "Air wake up".
You can then just hover your palm over the front face of the phone to wake it up.

Kingithy said:
If you go to Settings > Accessibility > Dexterity and Interaction > Enable "Air wake up".
You can then just hover your palm over the front face of the phone to wake it up.
Click to expand...
Click to collapse
Yea, but that causes a lot of issues because your phone will keep turning on when in your pocket
What we truly need is a double tap screen to turn it on
-Sent from Tapatalk

eyecon82 said:
Yea, but that causes a lot of issues because your phone will keep turning on when in your pocket
What we truly need is a double tap screen to turn it on
-Sent from Tapatalk
Click to expand...
Click to collapse
Ahh does it? I haven't tested it fully, but once I get my phone back I'll give it a test.
I'm sure Samsung would have considered the fact that we would be putting our phones in our pockets, and so they
would have prevented this from happening?
I'd assume that the system will look for a slight (not full) loss of light at close proximity, followed by the light returning?

eyecon82 said:
Yea, but that causes a lot of issues because your phone will keep turning on when in your pocket
What we truly need is a double tap screen to turn it on
-Sent from Tapatalk
Click to expand...
Click to collapse
OMG....
This feature only works when the device is on a flat surface, facing up. The accelerometer takes care of the measurement.
Even with the feature turned on, the device will not wake when in pocket, backpack, purse... :good:

I don't think he's looking for an app which will only turn the screen on if the phone is lying flat.
I would also like a double tap to wake. I hate air wakeup.
Sent from my SM-G900F using XDA Free mobile app

declan8888 said:
I don't think he's looking for an app which will only turn the screen on if the phone is lying flat.
I would also like a double tap to wake. I hate air wakeup.
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
bad news is, as far as i know, it's kernel related as s5 doesn't come with that feature.
good news is, @faux123 is planning to put that awesome feature to our galaxy devices, let's hope and keep our finger crossed

It's a kernel thing as the poster above me said. We'll just have to wait for a dev to release a kernel with DT2W support.

Maybe this would work.
https://play.google.com/store/apps/details?id=tecnology.angs.knockr

tooter1 said:
Maybe this would work.
https://play.google.com/store/apps/details?id=tecnology.angs.knockr
Click to expand...
Click to collapse
Battery eater cause screen keeps on.
Only solution is kernel with this option.
Custom kernel does not exist for my G901F yet, so good compromising is gravity screen on/off from here
https://play.google.com/store/apps/details?id=com.plexnor.gravityscreenofffree&hl=fr
I couple it with proximity screen off from here
https://play.google.com/store/apps/details?id=com.itsme4ucz.screenoffpro&hl=fr
With proximity screen off, I activated flip/cover mode.
With gravity screen on/off, activate pocket protection and screen on with movement.
Moreover, I chained gravity screen with a task (on/off) from tasker according to multiples profiles (work, car, home).
As a result:
- screen goes off when I cover screen or just wave on screen.
- screen goes on when I open flip cover, when I move my phone or wave on screen
withour doing anything else.
Best regards
Franky

Can't you install ktoonz? As far as I know his kernel has this feature...

S5 double tap to wake
lok55 said:
Can't you install ktoonz? As far as I know his kernel has this feature...
Click to expand...
Click to collapse
Hi there...I teste Ktoonsez and it doesn't work on s5...he considered it would drain the battery!!!
We can't have lg g3 feature on our s5s-s...COMMON!!!!!

Why the heck would you like this feature if u have that bottom button which u ONLY HAVE TO PUSH IT ONCE and screen is on.... Wtf.... Need Duble tap... When u have that physical button
Sent from my SM-G900F using XDA Free mobile app

terrorblade23 said:
Why the heck would you like this feature if u have that bottom button which u ONLY HAVE TO PUSH IT ONCE and screen is on.... Wtf.... Need Duble tap... When u have that physical button
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Lol.....I can see your point, but, I can also see the other side of it.........
Over time, the home button is gonna be pressed a s**tload of times....there's a possibility that *some* home buttons will wear out.......
I've had a look at "teardown" videos for the S5, and tbh, replacing the button will be a REAL b***ard........
Also, bear in mind that the home button now includes that fingerprint scanner, so the chances are that a replacement button assembly ain't gonna be cheap.
Sent from my rooted kn0x0 SM-G900F S5

keithross39 said:
Lol.....I can see your point, but, I can also see the other side of it.........
Over time, the home button is gonna be pressed a s**tload of times....there's a possibility that *some* home buttons will wear out.......
I've had a look at "teardown" videos for the S5, and tbh, replacing the button will be a REAL b***ard........
Also, bear in mind that the home button now includes that fingerprint scanner, so the chances are that a replacement button assembly ain't gonna be cheap.
Sent from my rooted kn0x0 SM-G900F S5
Click to expand...
Click to collapse
There also be a chance that u never use fingerprint so you can stick on the button something like a screen protector
And even if you find a way to use double tap wake.... You will have to consider the fact that. . This thing will use battery pretty much ... Because I think... IT will have to keep on the touch all the time
Sent from my SM-G900F using XDA Free mobile app

I'm using G900T on 4.4.2 stock, rooted and with ktoonsez kernel, and double tap to wake works flawlessly.

Boeffla kernel also has the double tap to wake option its for 5.0 LP.

Tap to Wake issues

Hey, guys. I'm a huge fan of this phone.. I can't get over what a good value it is for the money. I have almost zero issues with it. The one issue I do have is the inconsistency with tap to wake. It seems like after it has been in my pocket for a while, it just fails to work. This happens periodically throughout the day, to the point where I just can't rely on it. It drives me mad because that's kind of a must have feature for me. To be fair, the only device I have never had tap to wake issues with is LG phones. They just seem to work all the time.
I did raise the sensitivity following the guide found on these forums. It's something else, like the pocket protection is stuck on or something. Anyone else experience something similar? I don't want to use the fingerprint reader. Is there something I don't know? Some setting I'm not seeing? Or is this just how it is?
Still a great phone otherwise. I wish I could fix this one little thing.

Is your screen clean or dirty? Have you tried wiping it down with 70% isopropyl alcohol and seeing if that improves the responsiveness. Is the phone hot when it's not responding? Are your fingers dirty?

It's not very sensitive, you definitely need to give it a couple of thumps unlike the taps on an LG phone.
There's a learning curve with this phone. I nearly dislocated my shoulder trying to shake the flashlight awake before I realized you had to wake the screen first

ludovicien said:
It's not very sensitive, you definitely need to give it a couple of thumps unlike the taps on an LG phone.
There's a learning curve with this phone. I nearly dislocated my shoulder trying to shake the flashlight awake before I realized you had to wake the screen first
Click to expand...
Click to collapse
I mean, this only happens when I take it out of my pocket. Tap to wake works fine the rest of the time and my screen is definitely clean.
Sent from my ZTE A2017U using Tapatalk

greyhulk said:
I mean, this only happens when I take it out of my pocket. Tap to wake works fine the rest of the time and my screen is definitely clean.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
I'm coming from an lg phone as well, I have found the taps must be slower. The pause between taps needs to be just a little longer and it works for me almost every time.

Double tap to wake doesn't work when the phone has gone into doze mode. ZTE knows about this issue and is working on a fix.

xxBrun0xx said:
Double tap to wake doesn't work when the phone has gone into doze mode. ZTE knows about this issue and is working on a fix.
Click to expand...
Click to collapse
That actually explains a lot. Thanks!
Doze seems to break a lot, including notifications on other phones.
Sent from my ZTE A2017U using Tapatalk

greyhulk said:
That actually explains a lot. Thanks!
Doze seems to break a lot, including notifications on other phones.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
The doze should not kick in if the phone is moving. One of the conditions is that phone should be static for a while. More likely it's something based on proximity sensor to prevent accidental turn ons. I found that i would have to tap several times to wake it up most time i have to do it twice. The force touch is buggy
Sent from my shieldtablet using XDA-Developers mobile app

peramikic said:
The doze should not kick in if the phone is moving. One of the conditions is that phone should be static for a while. More likely it's something based on proximity sensor to prevent accidental turn ons. I found that i would have to tap several times to wake it up most time i have to do it twice. The force touch is buggy
Sent from my shieldtablet using XDA-Developers mobile app
Click to expand...
Click to collapse
Well, I haven't had any issues since I disabled doze and I doubt that's a coincidence.
I agree that doze shouldn't kick on in your pocket, which is why I originally suspected the proximity sensor, but it could be a bug in ZTE's ROM.
My Mate 8 had a malfunctioning doze mode that would cause all notifications to stop as soon as the screen went off, even if the phone was moving. I fixed that by disabling doze also.
Sent from my ZTE A2017U using Tapatalk

The same issue I'm having on both colors I'm having .
Most of the time when picking the device from my jeans pocket refuses to open with double tap even after several attempts.
I have to unlock by pressing with power button and then when holding my phone it stating to work fine.
It's really annoying and frustrating.
Only double tap to sleep with nova prime or 3D next launcher working 100% perfect in all situations from home screen.
Also I'm using glimpse notification and enable the option to double tap to sleep from lock screen and works perfect all time.
Another feature having is it wakes up the screen automatically every time having notification alert and after screen being off continuous the led to be on as a reminder.
Sent from my iPad Air 2

So, I was wrong. Disabling doze didn't fix it. I went back to my OnePlus 3 for a day to get perspective. That phone pretty much never misses a tap-to-wake. It just works. Conversely, the Axon regularly "goes to sleep" when it's in my pocket and I can tap on the screen as many times as I want and it will never come on until I hit the power button. It's definitely not working like it should, at least not for me.
I'm not sure how anyone can say that it's working fine. I like everything else about the phone. This is just annoying because I can't rely on using tap-to-wake. I spend more time tapping on the screen when it's not working than I would if it just didn't have the feature and I had to use other methods. If ZTE could fix this to work as reliably as an LG or the OnePlus 3, I'd be in heaven.

greyhulk said:
So, I was wrong. Disabling doze didn't fix it. I went back to my OnePlus 3 for a day to get perspective. That phone pretty much never misses a tap-to-wake. It just works. Conversely, the Axon regularly "goes to sleep" when it's in my pocket and I can tap on the screen as many times as I want and it will never come on until I hit the power button. It's definitely not working like it should, at least not for me.
I'm not sure how anyone can say that it's working fine. I like everything else about the phone. This is just annoying because I can't rely on using tap-to-wake. I spend more time tapping on the screen when it's not working than I would if it just didn't have the feature and I had to use other methods. If ZTE could fix this to work as reliably as an LG or the OnePlus 3, I'd be in heaven.
Click to expand...
Click to collapse
Totally agree.
Hope ZTE makes improvements on that very useful feature to become just like LG.
Sent from my iPad Air 2