Database Users

New Aria user here...

Hello there XDA I just switched to the Aria from the Captivate. I am new to Android modding, so please bear with me.
I like the phone, It doesnt bother me losing screen space. However it is a bit slow with the 600 MHZ processor.
So if there are some people kind enough to guide me to/through the following it would be appreciated.
1. I would like to overclock it a bit, maybe to 800.
2. General performance tweaks
3. Get rid of Att bloatware
4. Root ( z4root is not in the market anymore and ATT disables side loading.)
Sent from my HTC Liberty using XDA App

Everything u need is in the android Dev. Section for the aria its really simple. To find and to follow..I use cm6 rc2. It overclocks very nicely
Sent from my Liberty using XDA App

Hey Joshua, being new to the Aria as well (less than a month), I haven't looked into overclocking it... but I am running CM 6.1 RC 2, what do I need to do to start overclocking?

Install SetCPU to overclock. I wouldn't go over 825mhz as it starts getting unstable.
As for rooting, search for posts by user asiancuta. He did a really good write up that included a key point I didn't see anywhere else. It's titled NOOBZ: easy guide to rooting your aria.... Read all instructions, and make sure you understand it first.
To install cyanogenmod 6.1 rc2 do a search for That aria - she's so racy!
Sent from my Liberty using XDA App

Mike's Aria said:
Install SetCPU to overclock. I wouldn't go over 825mhz as it starts getting unstable.
Click to expand...
Click to collapse
In the other overclocking thread (or overcloking as the OP spelled it ) several people posted that they were running at 864... what type of instability is likely? Also, doesn't overclocking HAVE to have some sort of adverse effect? Like reduced reliability or an increased likelihood of hardware failure? If there are no adverse effects, why would HTC not set the CPU higher from the factory?
I want to try it, but I feel like I pushed the limits of my comfort zone just by rooting and installing CM...

911jason said:
In the other overclocking thread (or overcloking as the OP spelled it ) several people posted that they were running at 864... what type of instability is likely? Also, doesn't overclocking HAVE to have some sort of adverse effect? Like reduced reliability or an increased likelihood of hardware failure? If there are no adverse effects, why would HTC not set the CPU higher from the factory?
I want to try it, but I feel like I pushed the limits of my comfort zone just by rooting and installing CM...
Click to expand...
Click to collapse
I always lean on the side of caution when it comes to overclocking a phone. I don't want to fry the processor since I can't replace it as easily as one on a computer.
Processors are never set from the factory to run at their fastest.
Sent from my Liberty using XDA App

While it might seem odd since all these phones have the same hardware they don't all respond the same to overclocking. Some people can do 864. I can't even get my phone to do anything over 825 and even 825 gives me issues. I like to keep mine between 768-787. Over doing it can cause damage and shorten the life of the processor but keeping it around 800 is probably safe as long as you moniter temps. Heat is the real enemy here. Manufacturers are trying to balance cost, reliability, battery life. Our little phone use a smaller battery and so a lower clock speed keeps the phone running longer. And the aria is a mid range phone, they don't want it to be faster than the more expensive phones. Also Higher clock speeds will drain your battery faster. At 768 the phone is noticeably snappier and the battery drain over stock isn't even noticeable.

Huh. That's good to know, Callmearia. However I don't even know where to start on any of this. I've never 'flashed' a phone or anything like that before.
Sent from my HTC Liberty using XDA App

This is a really good guide explaining how to root your phone and install a custom recovery, Clockwork, with which you can flash ROMs, make backups, and a bunch of other stuff:
http://forum.xda-developers.com/showthread.php?t=788737
You will still not be able to sideload apps just by rooting though. You will need to flash a ROM in order to do that. Check out the Android Development section, it is all there.
L551 said:
Huh. That's good to know, Callmearia. However I don't even know where to start on any of this. I've never 'flashed' a phone or anything like that before.
Sent from my HTC Liberty using XDA App
Click to expand...
Click to collapse

I think most people can hit 864 now using CM6.1 RC2. I think some tweaks were made to allow it. Before I was only hitting 825mhz or 844mhz when I ran in to stability problems... but now I have none. Or, it could be due to the fact it's colder here now.

Alright, so after some adb troubles with Ubuntu 10.10, I am now rooted, woo!
So now, where to go from here?

This worked flawlessly and easy. Less than 5 minutes
http://forum.xda-developers.com/showpost.php?p=7449486&postcount=1
EDIT : I see that you already got rooted.
You have two choices for Attn1's custom ROMS
Liberated or Cyanogenmod
http://forum.xda-developers.com/showthread.php?t=819715
http://forum.xda-developers.com/showthread.php?t=821642
Take in mind that CM has more customizable features, INCLUDING OVERCLOCKING. Liberated doesn't.
Place the .zip on your SD card. Enter clockworkmod recovery by holding down the volume down button after restarting phone. Wipe Data, Cache, Dalvik Cache. Go to install zip from Sdcard. Pick the file. It should install. wait, and reboot and continue.
Customize it to your liking. Download apps/widgets
Turn off unnecessary background items. (Auto Sync)
Decrease Brightness
Only use GSM networks
(these are battery saving tips....lots more)
http://forum.xda-developers.com/showthread.php?t=505419
That is the SetCPU for XDA members.
To install, go through ADB in the command line, or download FASTAPP Install from the Market and place the .apk on your sd card and install it from there.

kaschenberg said:
I think most people can hit 864 now using CM6.1 RC2. I think some tweaks were made to allow it. Before I was only hitting 825mhz or 844mhz when I ran in to stability problems... but now I have none. Or, it could be due to the fact it's colder here now.
Click to expand...
Click to collapse
That's probably true. I haven't tried going over 825 since way back with dumfuqs kernel.

Alrighty... did all that, now running cyanogenmod on my Aria! \o/
No more ATT bloatware.
I made sure to do a nandroid backup just in case.
Also overclocked to 768MHz. Phone seems a bit quicker.
Thanks guys
Any other tips?
Oh also adb stopped working again on Ubuntu >.< Anyone know how to fix that?
Sent from my Liberty using XDA App

L551 said:
Alrighty... did all that, now running cyanogenmod on my Aria! \o/
No more ATT bloatware.
I made sure to do a nandroid backup just in case.
Also overclocked to 768MHz. Phone seems a bit quicker.
Thanks guys
Any other tips?
Oh also adb stopped working again on Ubuntu >.< Anyone know how to fix that?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Make sure you install the google apps package.
Also, Not too sure.
I use windows. Works perfectly on there. try that

Yup I made sure to install that. Need my market.
I'll see if it works on windows later.
Sent from my Liberty using XDA App

L551 said:
Alrighty... did all that, now running cyanogenmod on my Aria! \o/
No more ATT bloatware.
I made sure to do a nandroid backup just in case.
Also overclocked to 768MHz. Phone seems a bit quicker.
Thanks guys
Any other tips?
Oh also adb stopped working again on Ubuntu >.< Anyone know how to fix that?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Try leaving the OC alone after the reflash.. It's defaulted to 864mhz and it works flawlessly for me.

It was default 600MHz for me.
EDIT: Holding down 1 to access voicemail no longer works, as there is no voicemail number in the options. What is it?
Sent from my Liberty using XDA App

L551 said:
It was default 600MHz for me.
EDIT: Holding down 1 to access voicemail no longer works, as there is no voicemail number in the options. What is it?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Its different for every one. My VM is a local number. You can always just use your phone number.
I recently set my VM to go thru my Google Voice number now.
Sent from my Liberty using XDA App

Using my own number worked.
However, now my phone is freezing randomly, and causing the launcher to hang. (ADW and LauncherPro both do this)
It seems android.process.acore always takes alot of CPU time when it does this.

A tip for a faster transformer

I just wanted to let everyone know I found that if I installed cpu master free version and set it to 608 / 1000 set to boot on and performance selected, my tab runs a whole lot smoother. My wife is able to play bejewelled blitz on facebook with it now so she is happy.
Seems the stock kernels are very Conservative on the scaling and never really run at 1000mhz till you really nail them.
If the battery life sucks a little more, which to me wasn't a biggie cause I get 3 days out of it you can buy CPU Master full version for 1.99 and it will allow you to run a screen off setting too.
Setcpu has done nothing but bogged my transformer down and my nexus S so I tried this one and it doesn't so I am passing on the info.
I am not associated with Cpu Master in any way.
If I helped you click on my THANKS button!

I assume you need to be rooted for this ?

Sounds very interesting ...I may have to try this out.
Sent from my Transformer TF101 using XDA Premium App

blankers said:
I assume you need to be rooted for this ?
Click to expand...
Click to collapse
yes root is required

thanks for the tip...it does seem snappier....

CM7 Kernel Recommendations?

Hello all!
Just upgraded my wife from the MyTouch 3G Slide to the G2 as she has to have a keyboard and we were on our 5th replacement Slide. So, as she is not the geek that I am, she will not be constantly flashing new ROMs and such. However, I am going to at least install the latest CM and I am looking for kernel suggestions. I already have root, s-off, new hboot, and all that, I'm just waiting for CM7 to finish downloading.
I started using Android with the G1 and constantly updating Radios, as well as ROMs and I currently use a Samsung Vibrant running a TeamWhiskey ROM. It's stable as anything, I like the theme, and CM7 still has some broken stuff on the Vibrant. I'm glad to see that Eugene recently picked up a G2 as he made some bad ass kernels and ROMs for the Vibrant.
So, let's here those kernel recommendations and why you recommend them.
Thanks!

Well am currently using mexdroidmod and their kernel is pretty awesome because its fast and stable. My best advice is to test the diffrent kernel and read through the tread, see what people say about it. All the kernels I have tried are all awesome so you should try them
Sent from my HTC Vision using XDA Premium App

pershoot's kernel. great batt life and OCing

Umaro's kernel has been rock solid for me and has tons of features as well. You can OC all the way to 1.9 Ghz if you so please and it has smartass.

well considering your wife isn't much of a techie.. i say you should go with pershoots kernel because he's always releasing updates and i've never had a problem with any of them. the battery life is excellent if you use the right radio (.17 and .30 have been good to me), but you need to experiment with this though. the phone runs beautifully, just make sure you use superwipe+ to format/wipe so you don't end up with gps issues like many people have had, good luck!

I've run umaro, eugene, pershoot, flippy, pyro, etc etc... aaand I've decided that the provided kernel is pretty much good to go. yeah, there are some little trinkety things with a few of the above kernels that the standard CM7 kernel doesn't support... but honestly, they're worthless to a user who just wants to turn the phone on and have it work.
set her up with the stock kernel @ 245-1017 (I haven't found a reason yet to ditch the ondemand governor, it seems to work best with CM7) and a vanilla gingerbread launcher and she'll be blown away.. that's my $.02

Like said above, CM kernel is great. I've tried most or even all available kernels for CM and finaly decided to stick with original one. It's stable and supports OC (up to 1.5GHz) "out of box", so really, I see no single reason to use the other ones.
Sent from my HTC Vision using XDA App

AllWin said:
Like said above, CM kernel is great. I've tried most or even all available kernels for CM and finaly decided to stick with original one. It's stable and supports OC (up to 1.5GHz) "out of box", so really, I see no single reason to use the other ones.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I'm also thinking about changing the kernal, but only for smartass. Does smartass offer that much of an increase on battery life or anything else? Also, when you OC, do you use SetCPU or just CyanogenMod Settings?

slapshot30 said:
I'm also thinking about changing the kernal, but only for smartass. Does smartass offer that much of an increase on battery life or anything else? Also, when you OC, do you use SetCPU or just CyanogenMod Settings?
Click to expand...
Click to collapse
not at all pooping on any of the guys who swear by smartass/other governors, but the change in battery life is almost unnoticable for me.. the change in performance however can be pretty apparent.
here's my problem with "battery saving" governors:
in order to save battery, these governors are supposed to be more intelligent about which frequencies they select once a task is called... well, that's all well and dandy, but the problem is that the majority of battery-hogging apps (ie streaming music/video, gaming, browsing for a long time, being on the phone, etc) are still going to be battery hogs with or without a fancy governor. the governor isn't capable of making an app that needs a lot of processing power run well at a lower frequency, it can only try to be more selective about which frequencies it uses in order to attempt to save battery life.
additionally, most people use their phones like this: phone is idle (ie screen off), and a call arrives. call ends, phone is back to idle. texting a few people, back to idle. playing a game for 15 minutes, back to idle.
is it really logical to assume that these short bursts of activity are going to benefit at all from a fancy shmancy governor? I doubt it.
I still swear by ondemand or interactive (both work well for me) thru built-in settings if possible (ie cyanogen performance settings). second choice would be setcpu with no profiles (unless you're overclocking heavily, then you should at least have a temp warning profile). at this point, screen-off profiles don't do a damn bit of good, because pretty much every kernel we have for the vision is going to scale down during inactivity.

User feedback

So I've got some time at the moment to work on the vibrant again, so I figured I'd ask you guys a question.
What are you guys wanting out of the vibrant?
I'm not really one to go for the latest and greatest buzz word feature like "Linaro build" or "optimized build prop," etc.
lengthy posts are encouraged, tell me what you still want out of this device. What do you use it for? What do you want to use it for? Etc.
Like I said, not looking for "gimme 500MB ram" or " an updated 2.3 kernel", I wanna know what user experience your looking for.
Sent from my Galaxy Nexus using Tapatalk 2

No takers?
Sent from my Galaxy Nexus using Tapatalk 2

Now we have almost faultless ROMs and kernels, the only issue is GPS.

+1 on GPS

lorendroll said:
Now we have almost faultless ROMs and kernels, the only issue is GPS.
Click to expand...
Click to collapse
Point if the question was missed, it's not about faults. Also there are very talented individuals working on the GPS issues. I cannot test GPS as mine no longer works. I want to know not just for me but also the talented Devs working on the vibrant, what ideas do you guys have for improving the Android experience, just in this case I happen to be gearing it toward the vibrant as I won't be working in anything else myself. That doesn't mean it's faulty, there is always room for improvement.
Anyway...not monitoring this thread anymore....Idgaf anymore and people not gonna answer :3
Sent from my Galaxy Nexus using Tapatalk 2

ECOTOX,
Just in case you do monitor this thread Ill give you a request. Ive built a couple of Froyo ROMs now, and plan to stick with Froyo for some time (at least until the EU error fixed)
That said I usually package the Bali 18.8.UV kernel with them. My favorite Froyo kernel is the DMZ kernel.
http://rootzwiki.com/topic/633-kernel2213ghzdragonmodz-nightly3smartassscary8262011140pm/
What set your work apart is the fact it could stepclimp in 100mhz increments. My phone pukes at anything over 1100mhz. Its has the smartass governor (the one I want) that works perfectly. It is smooth, quick, and almost perfect for my needs. Ive only packaged it with one of my ROMs due to the lack to stepclimbing. Here is a request:
Ive tried up to 3 different overclock / volting programs. Tried to set it manually via init script, but the kernel has 2 stock settings: 500mhz / 1000mhz. If I I overclock to 1100mhz I only get three settings: 500/1000/1100. Is there any way you could get a 200mhz in there?
That said your git is available. I don't know how but I guess I could try and build my own based off your source / patches. You kinda sounded like you wanted to help/work some on the T959. With the EU error we have more folks coming back to Froyo every day. Froyo is not dead if I have anything to say about it -
Thanks for your time (I if read this)

+1 on GPS
Sent from my SGH-T959 using xda premium

GPS is primarily due to inadequate or faulty hardware design. We have pushed the limits of trying to fix it with software guys.

I personally would love more battery life. I truly cannot get more than 45 minutes of screen time in ICS.
Sent from my SGH-T959 using XDA

How about intergrating more RAM?
Sent from my SGH-T959 using xda premium

Moped_Ryder said:
ECOTOX,
Just in case you do monitor this thread Ill give you a request. Ive built a couple of Froyo ROMs now, and plan to stick with Froyo for some time (at least until the EU error fixed)
That said I usually package the Bali 18.8.UV kernel with them. My favorite Froyo kernel is the DMZ kernel.
http://rootzwiki.com/topic/633-kernel2213ghzdragonmodz-nightly3smartassscary8262011140pm/
What set your work apart is the fact it could stepclimp in 100mhz increments. My phone pukes at anything over 1100mhz. Its has the smartass governor (the one I want) that works perfectly. It is smooth, quick, and almost perfect for my needs. Ive only packaged it with one of my ROMs due to the lack to stepclimbing. Here is a request:
Ive tried up to 3 different overclock / volting programs. Tried to set it manually via init script, but the kernel has 2 stock settings: 500mhz / 1000mhz. If I I overclock to 1100mhz I only get three settings: 500/1000/1100. Is there any way you could get a 200mhz in there?
That said your git is available. I don't know how but I guess I could try and build my own based off your source / patches. You kinda sounded like you wanted to help/work some on the T959. With the EU error we have more folks coming back to Froyo every day. Froyo is not dead if I have anything to say about it -
Thanks for your time (I if read this)
Click to expand...
Click to collapse
Lol happened to be browsing the forum for info and saw you posted here.
I'll make you a kernel, but I'm not 100%sure I'm sticking with the 100mhz steps for my own release but I'll make you one specifically. I might, but I want to get voltage control working with 100mhz steps, I also gotta work on keeping the gpu clocks more stable.
Sent from my Galaxy Nexus using Tapatalk 2

I would be in your debt sir. Thanks for your time.

I just wanted to say thanks for the great work on DMZ, ECOTOX. It has surpassed Overstock as my kernel of choice, but I had one quick question/request. Is it an issue with the kernel or with a particular ROM for some functions to get a little quirky when you start to overclock into the 1.2Ghz range? Whenever I set the CPU ceiling to 1.2Ghz the long press functions on the haptic buttons of the Vibrant would become flakey. I read that's fairly common with overclocking, but was curious who the culprit might be.
Not knowing anything about how scalers/governers can be implemented, what would the chances be to get something like Smartass v2 or a few more options on a new Froyo kernel? I liked messing around with them when I was running Sub-Zero on ICZen to find that happy medium of battery life vs performance.

I say a Galaxy S III themed gingerbread ROM. Anyone?

Having your cake and eating it too

Most of life is a choice between one or the other but with the Nexus 7 along with Root, Custom Recovery, cm10.2 unofficial, Faux Clock Kernel Control App and Jassy Release 5 Kernel it might just be possible to have both. Jassy has managed to put together a kernel that combines a 1.9 GHz over clock and a 487 MHz GPU over clock. With a global undervolt of -24 MV I managed to pull off stunning benchmarks, smooth lag free performance and incredible battery time. Just under 13 hours battery time in fact. I did this with a YouTube kung fu movie fest for about 12 and a half hours and a half hour of benchmarks and downloading a few apps. Remember if you game you can not expect this kind of battery performance but it does do great at that as well. I've attached some screenshots of my settings so you can reproduce these results if you would like.
Remember when you Root, ROM and Over clock you do it at your own risk and please thank the fine Developers who gave their time to make this kind of fantasy possible. I in no way had a hand in developing this software, I just took the time to do many benches and battery tests on many Roms and kernels then undervolted a bit.
Sent from my Nexus 7 using xda app-developers app

Benchmarks
Sent from my Nexus 7 using xda app-developers app

Nice, will have to check this out
Sent from my Nexus 4 using xda app-developers app

So to replicate your results, we need to flash cyagen, and jassy release 5, and then adjust the settings to replicate yours, or does jassy's release already have some of those settings in it?
What other apps did you download?
Getting longer battery life and a faster tablet is quite attractive!
EDIT I just installed jassy r5, and my quadrant is only 5679.. is something wrong, or do I need to also do the tweaks you listed here first?
EDIT 2: I've set faux to the same setting now, but am still using cleanroom1.3, and the quadrant results are 6787

Gareee said:
So to replicate your results, we need to flash cyagen, and jassy release 5, and then adjust the settings to replicate yours, or does jassy's release already have some of those settings in it?
What other apps did you download?
Getting longer battery life and a faster tablet is quite attractive!
EDIT I just installed jassy r5, and my quadrant is only 5679.. is something wrong, or do I need to also do the tweaks you listed here first?
EDIT 2: I've set faux to the same setting now, but am still using cleanroom1.3, and the quadrant results are 6787
Click to expand...
Click to collapse
Sorry I never saw your posts. Never looked at the thread again. To replicate my results you would have to download cm10.2 and Jassy release 5 and faux kernel control app paid version and set exactly like in the screen shots. I have since made a few more refinements but nothing you couldn't play with yourself. Make sure you enable mpdecision. Make every screen look like mine.

Fiops as I/o and 62c 82c as intellithermal is the only settings changed. Bout 7 hours of YouTube and 5 hours of heavy browsing. Couldn't ask for better battery life. NO Gaming.
Sent from my Nexus 7 using xda app-developers app

Yep, I did duplicate them, but couldn't get quadrant scores anywhere near yours. (they were better though.. it might be a cleanroom issue).
I upgraded to Jassy rev 6, ran into issues, and then just reflashed the stock kernel.
I was hoping we'd see Jassy rev 6 lockup issues fixed, but its been a week now. I'm also read of a few misc cm issues, and I'e been waiting for them to clear up as well. Cleanrom isn't having any issues at all, so I've stuck with it for now.

conan1600 said:
Fiops as I/o and 62c 82c as intellithermal is the only settings changed. Bout 7 hours of YouTube and 5 hours of heavy browsing. Couldn't ask for better battery life. NO Gaming.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
How's stability with your set-up?

Gareee said:
Yep, I did duplicate them, but couldn't get quadrant scores anywhere near yours. (they were better though.. it might be a cleanroom issue).
I upgraded to Jassy rev 6, ran into issues, and then just reflashed the stock kernel.
I was hoping we'd see Jassy rev 6 lockup issues fixed, but its been a week now. I'm also read of a few misc cm issues, and I'e been waiting for them to clear up as well. Cleanrom isn't having any issues at all, so I've stuck with it for now.
Click to expand...
Click to collapse
Cleanrom will not bench as high. Its a stock based ROM. Truth is though once your this high your not gonna see a whole lot of improvement in daily performance unless you go looking for it. Cleanrom is one of the best Roms I've ever used and there is absolutely nothing wrong with sticking with it. I go back and forth between the 2 myself. As themes and tweaks come out for nexus 7 2013 you'll find cleanrom will get even better than it is now also. Wish someone would do a tablet ui lol.

dkb218 said:
How's stability with your set-up?
Click to expand...
Click to collapse
I haven't had a single random reboot. Chrome works real well as long as you can change it from beta in lower left of xda page. I haven't overheated but I gotta tell you I'm no hardcore android gamer. Some angry birds from time to time or subway surfers lol. I have probably gamed for about an hour or so on these settings and not gone into a state of panic about temps though. Any longer than that or some other game and I couldn't say. in fact FOR me things are so smooth on this machine I had to order a new HP to tinker with lol. Seriously this is the best android machine I've owned. And buddy, I've had em all. I also use adaway so that may help with chrome as well.

Impressive scores man.
Yeah hesitant to jump to other roms myself at least at this time. Everything is so new finding a "good one" is hard to do at least yet. Though I've used CleanROM's on other devices I've had in the past and love them. Personally if CleanROM comes out with a 1.4 I might consider jumping into it.

Thanks for sharing! My only suggestion would be for you to recommend another kernel tuning app other than Faux's app. I'm just personally not a fan of someone who does nothing but kang, and even then still doesn't credit who he is kanging from. Too many hard working honest developers for me to support a faux developer (yes, pun intended. Maybe that's where the screen name came from?).
Just my $0.02.…
EDIT : For anyone questioning the integrity of my comment, just do some research and you'll see what I'm saying
SwiftKey'ed from my '13 Nexus 7 FHD using XDA Premium HD

stanglifemike said:
Thanks for sharing! My only suggestion would be for you to recommend another kernel tuning app other than Faux's app. I'm just personally not a fan of someone who does nothing but kang, and even then still doesn't credit who he is kanging from. Too many hard working honest developers for me to support a faux developer (yes, pun intended. Maybe that's where the screen name came from?).
Just my $0.02.…
EDIT : For anyone questioning the integrity of my comment, just do some research and you'll see what I'm saying
SwiftKey'ed from my '13 Nexus 7 FHD using XDA Premium HD
Click to expand...
Click to collapse
I have absolutely No interest in politics on my nexus 7 2013. if he did wrong, shame on him however I have tried each and every kernel control app on the market and reported my best results. I have yet to produce scores or battery life comparable even within 10% of fauxclock/Jassy R5 combo. I do not intend to do any research at all about whatever faux123 did or didn't do. I understand a personal grudge and respect your right to hold one. If your looking for something as close as you can get to his kernel control app try trickster. I didn't have a lot of success with it but you might find a combination that works close. If I were in the middle of whatever happened between faux123 and you or whoever I might have formulated an opinion. I'm not chiding you either. You brought an issue before me and I am simply stating I don't want involved as its in my humble opinion not my place or my fight, not to mention it appears it was already fought.
if I simply hated and didn't use a product based on someone else I don't know having a problem with that individual I wouldn't be able to buy anything, at all, anywhere, on earth, or in heaven, ever! If you tell me he harmed a baby and I see he was convicted of it in a trial of his peer's elected in a fair and balanced environment I will most certainly NOT have anything to do with him. But unproven or conflicting information, that may be due to personal interpretations is difficult for me to get involved in. Especially after the fact. And then there is the whole, if a man was punished for his crime do you continue to persecute him after he paid his dues thing.

Are there any deal breaking issues in CM? If not, switching does not bother me at all, and getting better all over performance is worth while.
I just don't want to spend more time tinkering with my tablet than actually using it.

What's your binning?

appreciate you sharing your jassy 5 set up with the fauxclock app. im on jassy 5 as well and have been running the setup that jassy posted but now im gonna try your set up. i just got one question about it: how is your sleep mode stand by time? i lose 1-2% in 8 hours

Gareee said:
Are there any deal breaking issues in CM? If not, switching does not bother me at all, and getting better all over performance is worth while.
I just don't want to spend more time tinkering with my tablet than actually using it.
Click to expand...
Click to collapse
I personally would call the current cm build almost RC material. I have no problems with it at all.
My bin was 14/2 if I'm not mistaken.
I probably lose a bit less than that but can't say for certain as I constantly use it lmao. I do get exceptional screen on time really. There are some screen shots on previous page I think.

Cool. Might have to take the plunge. Do you have to wipe to install it? (I didn't have to wipe for cleanrom.)

Gareee said:
Cool. Might have to take the plunge. Do you have to wipe to install it? (I didn't have to wipe for cleanrom.)
Click to expand...
Click to collapse
You have to wipe on a first install.

conan1600 said:
You have to wipe on a first install.
Click to expand...
Click to collapse
Ugh.