Database Users

ClockworkMod recovery (CWM) and getting on ROOT ZTE BLADE G2V880H

Instructions for installing ClockworkMod Recovery (CWM) and obtaining ROOT on your smartphone ZTE V880H.
(1)Installing ClockworkMod recovery (CWM) on ZTE V880H
- Connect your phone to the computer. Debug mode (looking in Settings -> For developers). Ibid disable fast boot (remove the checkbox from step "Quick download").
-If previously the driver from the smartphone has not been established, it should automatically start installing them. Or set manually by downloading the file - http://yadi.sk/d/DfUBGhZD78bkk (in case of problems, try an alternate driver - https://yadi.sk/d/HXZozNan78bya).
- Download the SP_Flash_tool, https://yadi.sk/d/vN-rGYsB78cFqlocated in the folder and run it Flash_tool.exe. Click on «Scatter-loading» and select the file MT6589_Android_scatter_emmc.txt, which we take here.https://yadi.sk/d/6vF8waES78dZ2 Click on the line «RECOVERY» and specify the path to the file recovery.img, who download here.https://yadi.sk/d/y0zBrS-s78e_A Next, click on the line BOOTIMG and specify the path to the file boot.img, which swing here.https://yadi.sk/d/pFOAD7xp78fCW
-Turn off your smartphone, take out the battery, connect in this state to a computer.
- In Flash Tool click the Download button and wait for the appearance of the window with a green circle. The installation is completed ClockworkMod Recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(2)Getting ROOT on ZTE V880H
-Download the file -> SuperSU-v1.25.zip,https://yadi.sk/d/svUKzViC78j2P throws in root SD-card.
-Boot into ClockworkMod Recovery (volume rocker up button and turn off at the same time on the smartphone).
-Select install zip from sdcard -> choose zip from sdcard -> SuperSU-v1.25.zip.
-Wait until the completion of the installation process and restart ROOT smartphone (reboot system now).

ali.jishan786 said:
Instructions for installing ClockworkMod Recovery (CWM) and obtaining ROOT on your smartphone ZTE V880H.
(1)Installing ClockworkMod recovery (CWM) on ZTE V880H
- Connect your phone to the computer. Debug mode (looking in Settings -> For developers). Ibid disable fast boot (remove the checkbox from step "Quick download").
-If previously the driver from the smartphone has not been established, it should automatically start installing them. Or set manually by downloading the file - http://yadi.sk/d/DfUBGhZD78bkk (in case of problems, try an alternate driver - https://yadi.sk/d/HXZozNan78bya).
- Download the SP_Flash_tool, https://yadi.sk/d/vN-rGYsB78cFqlocated in the folder and run it Flash_tool.exe. Click on «Scatter-loading» and select the file MT6589_Android_scatter_emmc.txt, which we take here.https://yadi.sk/d/6vF8waES78dZ2 Click on the line «RECOVERY» and specify the path to the file recovery.img, who download here.https://yadi.sk/d/y0zBrS-s78e_A Next, click on the line BOOTIMG and specify the path to the file boot.img, which swing here.https://yadi.sk/d/pFOAD7xp78fCW
-Turn off your smartphone, take out the battery, connect in this state to a computer.
- In Flash Tool click the Download button and wait for the appearance of the window with a green circle. The installation is completed ClockworkMod Recovery.
(2)Getting ROOT on ZTE V880H
-Download the file -> SuperSU-v1.25.zip,https://yadi.sk/d/svUKzViC78j2P throws in root SD-card.
-Boot into ClockworkMod Recovery (volume rocker up button and turn off at the same time on the smartphone).
-Select install zip from sdcard -> choose zip from sdcard -> SuperSU-v1.25.zip.
-Wait until the completion of the installation process and restart ROOT smartphone (reboot system now).
Click to expand...
Click to collapse
Use directly mobile uncle tool to flash recovery but first root mobile with framroot app.thanks for sharing recovery...

pratikmore said:
Use directly mobile uncle tool to flash recovery but first root mobile with framroot app.thanks for sharing recovery...
Click to expand...
Click to collapse
i also use this method...it was a more easy method.....but it is not easy 4 some people.

nothing happening after clicking download
hi, i followed your instruction but nothing is happening, nothing is being downloaded, what could be the reason. please help

[Q] CMD to build recovery partition

Lets start with this....
Incase above didn't work.... http://youtu.be/xy816n5AfZc
I put windows 10 tech preview on my hp laptop, i did recoverydrive.exe to build a recovery on my flash drive and then deleted the recovery partition from hard drive to save space (major PITA in hindsight) but too late now. Anyway, i cant get it to recover from flash drive now and it is pissing me off. I have tried putting in flash, restart, it asks what language for keyboard and then the menus begin. Hitting recovery from.... Restarts the pc and process starts again. Hitting recovery opens hp recovery environment, but don't let me select usb. Hitting escape while starting up and pressing F9 to boot from..... and select usb device gives me same select language and click on anything after that to continue same endless cycle of nothingness.
My flash drive shows as G:
And contains:
boot (file folder)
efi (file folder)
sources (file folder)
bootmgr (file)
bootmgr.efi (EFI file)
reagent.xml (xml document)
Anyone want to put forth input to above youtube link that would let me build a refresh partition on my C:\ from G:\ please?

In my eyes the video linked to contains a bad avdvice: the System Restore image shouldn't be saved to default Windows drive [C:], but onto another HDD drive / partition.
The System Restore image created with means Windows 8 offers, is simply a snapshot of specific portions of the Windows drive [C:], consists of folders Backup nnnn-nn-nn, Catalog, Logs, SPPMetadataCache and file MediaId. This System Restore image can be replayed at any time via Windows 8 inbuilt means.
The System Restore image created as shown before has nothing to do with a System Refresh offered by Windows 8, where Windows 8 indeed will be freshly installed. Hence you need the original Windows 8 Installation disk which contains the folders/files you enumerated: boot, efi , sources, etc.
If these installation folders/files are present (copied onto) on a bootable device, i.e. those devices which UEFI / BIOS lists and from which you can choose , then you can Refresh your Windows 8 installation.

jwoegerbauer said:
In my eyes the video linked to contains a bad avdvice: the System Restore image shouldn't be saved to default Windows drive [C:], but onto another HDD drive / partition.
The System Restore image created with means Windows 8 offers, is simply a snapshot of specific portions of the Windows drive [C:], consists of folders Backup nnnn-nn-nn, Catalog, Logs, SPPMetadataCache and file MediaId. This System Restore image can be replayed at any time via Windows 8 inbuilt means.
The System Restore image created as shown before has nothing to do with a System Refresh offered by Windows 8, where Windows 8 indeed will be freshly installed. Hence you need the original Windows 8 Installation disk which contains the folders/files you enumerated: boot, efi , sources, etc.
If these installation folders/files are present (copied onto) on a bootable device, i.e. those devices which UEFI / BIOS lists and from which you can choose , then you can Refresh your Windows 8 installation.
Click to expand...
Click to collapse
So the recovey flash drive thru hp recovery manager was a cruel joke hp plays on people and you cant really recovery from the flash drive at a later time when needed?

jpwhre said:
So the recovey flash drive thru hp recovery manager was a cruel joke hp plays on people and you cant really recovery from the flash drive at a later time when needed?
Click to expand...
Click to collapse
HP don't use the same terms as Microsoft. They throughout speak of System Recovery, whereas Microsoft distinguish between System Recovery and System Refresh. As I've noticed, HP always mean System Refresh in the sense of Microsoft.
Don't own an HP computer, so I don't know how "HP Recovery Manager" does its job.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BTW: Performing an HP System Recovery (Windows 8) in detail is described here:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=de&lc=de&dlc=de&docname=c03489643

I did the process from that hp site. That is how I found the escape on startup trick and F9 commands, still does language, pick an option (recover from something, exit to tech preview, advanced options.....) Anything I press sends me to restart, select language, select option and that cycle just keeps looping until I remove the flash drive. I'm at my end of patients and ready to take it to Microsoft store with the box it came in that shows the OS that was OEM installed and tell them to re-install it.

[GUIDE] How to root Elephone P7000

Preparation:
1. Make sure that your computer installed a driver
(Download link here )
2. Flash tool (SP flash tool recommended, download link here )
Please be careful and make sure that you have enough knowledge or we suggest that don't root your phone casualy.
1. Download the file from below link. you're going to save to somewhere you can remember it, for this tutorial, I'm going to use my desktop.
Dnowload link here
2. Unzip the file that you have downloaded just now.
3. Cope zipe file named "superSU_PRO_V2.49.zip" to your SD card and then turn off the phone.
4. Open flash tool, Click "scatter-loading" and choose the file named "p7000-recovery" which you have just saved in your computer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.Click download and then connect your phone with computer.
6. When you see a picture as below that means you have installed the third party recovery successfully.
7. Move out the battery and then put it back, press "power" + "VOL +" to enter recovery mode. ("VOL -" to choose, "power" to confirm)
http://bbs.elephone.hk/data/attachment/forum/201506/11/164351v74mw4840lullmwr.png
8. Choose "install zip" by pressing "VOL -" ,
9.Go to "choosezip from /sdcard"
10. Choose "superSU_PRO_V2.49.zip" , press "power" key to confirm.
11. Choose "yes-install superSU_PRO_V2.49.zip", press "power" key to confirm.
12. Congratulations!!! You have finished the whole process, now enjoy.

You can also root without flashing recovery.
1) Download and install SuperSU from Play Store, don't run it yet.
2) Enable USB Debugging and install ADB drivers.
3) Download this ZIP http://www37.zippyshare.com/v/SaH4NxFw/file.html , unzip to a folder and open command prompt in it.
4) Issue the following commands:
Code:
adb kill-server
adb root
adb connect localhost:5037
adb shell setenforce 0
adb shell mkdir -p /data/local/tmp/supersu/arm64
adb push su /data/local/tmp/supersu/arm64/
adb push supolicy /data/local/tmp/supersu/arm64/
adb push libsupol.so /data/local/tmp/supersu/arm64/
adb push update-binary-adb-arm64-v8a-21 /data/local/tmp/supersu/
adb shell chmod 0755 /data/local/tmp/supersu/update-binary-adb-arm64-v8a-21
adb shell /data/local/tmp/supersu/update-binary-adb-arm64-v8a-21
5) Don't reboot, run SuperSU, choose normal install, done.

Thanks

Thanks for all your work !

I followed all the directions and disabled the driver signature verification on my Windows 8.1 computer. I have a problem that when I plug in the phone to the computer (with the phone off) the computer recognizes it for a few seconds and then it does not anymore. I get the boopoopoop sound to incidate it is connected and the boopbum noise five seconds later indicating that it is off. Can anyone help?

GCbard said:
I followed all the directions and disabled the driver signature verification on my Windows 8.1 computer. I have a problem that when I plug in the phone to the computer (with the phone off) the computer recognizes it for a few seconds and then it does not anymore. I get the boopoopoop sound to incidate it is connected and the boopbum noise five seconds later indicating that it is off. Can anyone help?
Click to expand...
Click to collapse
If you can access adb (turn on debug mode in developer settings), then try my method above. No need to use preloader driver.

eLeKtriK EyE said:
If you can access adb (turn on debug mode in developer settings), then try my method above. No need to use preloader driver.
Click to expand...
Click to collapse
Thank you. I tried but the phone is not recognized as ADB. I have usb debugging checked and it still does not work. I even have all the drivers installed. Any suggestions?

Try with another computer, it must be windows 8 fault.

GCbard said:
Thank you. I tried but the phone is not recognized as ADB. I have usb debugging checked and it still does not work. I even have all the drivers installed. Any suggestions?
Click to expand...
Click to collapse
Download latest mtk droid tool's, i upload this some time's ago, this is Link.
https://mega.co.nz/#!2V9SRCRZ!xYn52zbVEfGze4zCyaUkfwStCUe0tt408IBpR-Tq-Fo
And here i add android commander. Try. For me working, but MTK DT no fully work

GCbard said:
I followed all the directions and disabled the driver signature verification on my Windows 8.1 computer. I have a problem that when I plug in the phone to the computer (with the phone off) the computer recognizes it for a few seconds and then it does not anymore. I get the boopoopoop sound to incidate it is connected and the boopbum noise five seconds later indicating that it is off. Can anyone help?
Click to expand...
Click to collapse
i had the same issues when i first tried flashing the device, some moderator in the eleforum stated that's normal for the phone to act like that, because it will just detect to flash for 1.5 sec and then jump into charging mode
do this steps and should work fine
1 - DO not connect the phone to the computer
2 - open the flash tool
3 - look for the scatter.txt file that you want to flash "either rom or recovery"
4 - click download on the top
5 - once the processes above have been done, connect the device and it will start the flashing process.
you are done.

TopoX84 said:
i had the same issues when i first tried flashing the device, some moderator in the eleforum stated that's normal for the phone to act like that, because it will just detect to flash for 1.5 sec and then jump into charging mode
do this steps and should work fine
1 - DO not connect the phone to the computer
2 - open the flash tool
3 - look for the scatter.txt file that you want to flash "either rom or recovery"
4 - click download on the top
5 - once the processes above have been done, connect the device and it will start the flashing process.
you are done.
Click to expand...
Click to collapse
Thanks! It worked.

I tried it , once I click download. I don't see it downloading anything. 0 b/s and -0 bytes.

TopoX84 said:
do this steps and should work fine (add : turn phone off)
1 - DO not connect the phone to the computer
2 - open the flash tool
3 - look for the scatter.txt file that you want to flash "either rom or recovery"
4 - click download on the top
5 - once the processes above have been done, connect the device trough usb cable (phone still off)
6- then turn it on and it will start the flashing process.
you are done.
Click to expand...
Click to collapse
Worked fine here (added some steps), did not install it from sd card as it is still in the old phone :
choosed install zip from last folder and then move to the folder where it is ( vol + /- to scroll down, power to validate). I put it on download folder (on the phone memory), but of course you can put it anywhere you want !
Very smooth install, thx for the great tutorial

Help me
Followed all your directions, when I click on download, nothing happens

yeah same here when I press "Download" nothing happens (Windows 8.1 x32)

If I use one of these methods to root my P7000, enable Link2SD and then unroot it, can I retain the Link2SD features?
I want to be able to install/move apps onto the SD card but I don't really want or need a rooted phone in the long term.

Re upload recovery:
adf . ly/1NoLAj
(without the spaces)

Hi, could you anybody please reupload files with CWM and Supersu.zip? The link doesn´t work
Edit: Sorry, the link is working, error in my browser

download link has broken. T_T

I've got " the load scatter file is invalid" is there any way to get through this problem? I've already tried different versions of SP flashtool still got the same. Files downloaded from Devblaze who reuploaded them! The first post's links don't work.

Fixing script for boot looping on OOS 3 [Windows]

OK, I just did another rescue script, it's using the files from the final release but it will install them one at a time using your computer instead of trying to install the rom.
THIS GUIDE IS FOR WINDOWS ONLY!
If someone else wants to convert it for Linux/OSX feel free but please make a new thread with a similar format to the title as this one but with [Linux/OSX]
Bear in mind this script will also install the compatible TWRP version 3.0.2.0 which will work with the final OOS3 and also with the new codebase in CM13 unless you sideload the complete rom in which case that will install the default OnePlus recovery. You can always install TWRP using the files within after this anyway
Anyone who wants to give it a go can download it at the link below, remember IT'S NOT A FLASHABLE ZIP, it's the files packaged into a zip.
Download here from Android FileHost : https://www.androidfilehost.com/?fid=24580943222146240
Carry out the following instructions as I have entered them.
Unpack the zip file into a folder, possibly on your desktop so you can see all the files easily.
Reboot your phone into fastboot mode by holding down the VOLUME UP button while holding the POWER button until you see fastboot mode show, obviously make sure you have connected the phone to your computer via usb cable.
If you have not unlocked your phone then immediately go watch the video below to find out how to do so then come back and continue the instructions from step 4.
https://www.youtube.com/watch?v=KZaajUEybNM
Open an elevated prompt window in the folder you unpacked the zip into (elevated means it has administrator privileges), to do this, right click in the folder (not on a file) while holding the SHIFT key, then choose "Open command window here", see below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You may be prompted to allow admin privileges, say yes.
In the command window you opened type the following:
fastboot devices
You should then see something similar to the screenshot below:
If you don't see a number followed by fastboot then you need to install or re-install your drivers. (I've uploaded the latest version to Android FileHost here : Download, remember to restart the computer before proceeding)
If you do see something similar to the above, then type the following into the command window:
fixoos
Then press enter, now adb will flash the different new versions of the partitions needed to either install the rom or reboot into the new version of TWRP.
It should look like this (I've shrunk the text to try to fit it all in) :
The last 2 steps in the script are going to flash the new compatible TWRP as your recovery partition and then it will also reboot into that version of TWRP.
All of this presumes that you were able to copy whichever rom you want to install onto your phone.
If you did not copy the rom onto your phone then download it the link below :
https://www.androidfilehost.com/?fid=24580917854994435
Copy the file into the same folder as the rest of the files and then run the following in the command window :
adb sideload OnePlus2Oxygen_14_OTA_019_all_1606041303.zip
(If you start typing the filename and press TAB it should autocomplete the name as long as the zip file is in the same folder as you opened the command window in)
Now press enter and ADB should install the full release rom itself, bear in mind, this will NOT include the new TWRP as TWRP is not a part of the default rom.
Please post any problems you have below, however, as long as you follow the instructions properly you should be ok.

djsubterrain said:
OK, I just did another rescue script, it's using the files from the final release but it will install them one at a time using your computer instead of trying to install the rom.
THIS GUIDE IS FOR WINDOWS ONLY!
If someone else wants to convert it for Linux/OSX feel free but please make a new thread with a similar format to the title as this one but with [Linux/OSX]
Bear in mind this script will also install the compatible TWRP version 3.0.2.0 which will work with the final OOS3 and also with the new codebase in CM13 unless you sideload the complete rom in which case that will install the default OnePlus recovery. You can always install TWRP using the files within after this anyway
Anyone who wants to give it a go can download it at the link below, remember IT'S NOT A FLASHABLE ZIP, it's the files packaged into a zip.
Download here from Android FileHost : https://www.androidfilehost.com/?fid=24580943222146240
Carry out the following instructions as I have entered them.
Unpack the zip file into a folder, possibly on your desktop so you can see all the files easily.
Reboot your phone into fastboot mode by holding down the VOLUME UP button while holding the POWER button until you see fastboot mode show, obviously make sure you have connected the phone to your computer via usb cable.
If you have not unlocked your phone then immediately go watch the video below to find out how to do so then come back and continue the instructions from step 4.
https://www.youtube.com/watch?v=KZaajUEybNM
Open an elevated prompt window in the folder you unpacked the zip into (elevated means it has administrator privileges), to do this, right click in the folder (not on a file) while holding the SHIFT key, then choose "Open command window here", see below:
You may be prompted to allow admin privileges, say yes.
In the command window you opened type the following:
fastboot devices
You should then see something similar to the screenshot below:
If you don't see a number followed by fastboot then you need to install or re-install your drivers. (I've uploaded the latest version to Android FileHost here : Download, remember to restart the computer before proceeding)
If you do see something similar to the above, then type the following into the command window:
fixoos
Then press enter, now adb will flash the different new versions of the partitions needed to either install the rom or reboot into the new version of TWRP.
It should look like this (I've shrunk the text to try to fit it all in) :
The last 2 steps in the script are going to flash the new compatible TWRP as your recovery partition and then it will also reboot into that version of TWRP.
All of this presumes that you were able to copy whichever rom you want to install onto your phone.
If you did not copy the rom onto your phone then download it the link below :
https://www.androidfilehost.com/?fid=24580917854994435
Copy the file into the same folder as the rest of the files and then run the following in the command window :
adb sideload OnePlus2Oxygen_14_OTA_019_all_1606041303.zip
(If you start typing the filename and press TAB it should autocomplete the name as long as the zip file is in the same folder as you opened the command window in)
Now press enter and ADB should install the full release rom itself, bear in mind, this will NOT include the new TWRP as TWRP is not a part of the default rom.
Please post any problems you have below, however, as long as you follow the instructions properly you should be ok.
Click to expand...
Click to collapse
Linux version -> http://forum.xda-developers.com/oneplus-2/help/linux-fixing-script-boot-looping-oos-3-t3395736

[Root Guide] INSTALL ROOT / WITHOUT RECOVERY / ADB-FASTBOOT / MAGISK

Hello, first of all I apologize for my English if you don't understand me somewhere, I'm learning English. Greetings from Peru.
Files and programs you need to download​THIS PROCESS WORKS WITH ALMOST ALL DEVICES, ONLY IF THEY HAVE THE BOOTLOADER CORRECTLY UNLOCKED WITHOUT THE NEED OF A TWRP.
In the computer​1- Lenovo Rescue and Smart Assistant, will help you in 2 things: In case your device is frozen or in a loop, there you can recover it and right there you can find and download the ROM of your device for free.
As you can see in this image my device is already selected and the ROM is already downloaded (just follow the steps and your device will be fine again)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here you will find the ROM
as you can see, location, folder and files of the ROM (it is necessary that you know where it is since you will need some files later)
2-You need to have ADB/FASTBOOT installed to be able to install the ROOT (remember that this is the safe way, there is no risk of your device freezing or in a loop, but everything is possible).
Link : https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
on device​1- First of all, you have to have the bootloader unlocked, here I leave the guide since it is somewhat long to read
Link : https://www.mobilewithdrivers.com/download/unlock-bootloader/lenovo-tab-m10-fhd-plus-tb-x606f
2- After unlocking the bootloader, you have to have Magisk.apk installed on your device
Link : https://github.com/topjohnwu/Magisk/releases
3- After installing Magisk, on the main screen you have to see if Ramdisk is "yes" or "no".
It says "si" because my native language is Spanish.
4- Go back to the computer and in the ROM folder you have to find the file "boot.img" and copy it to your device
5- within Magisk where it says "install", they give it to install and something similar to this will come out:
6- They only give the following next "siguiente " and select the option of Select file "seleccionar y parchar un archivo" (I repeat again ignore if it comes out in Spanish, you in English)
7- from there the explorer will open and they will look for where they copied the "boot.img" and select it.
Once the selector is given to start or let's start "comencemos"
the process has to be something similar to the image that I will post below, you can several certain lines but at the end it has to say "done!" without any error.
8- Now to finish the process on your device, copy the file that appears in your magisk "the patched file". Copy and paste it into the ADB/FASTBOOT folder
we return to the computer​
1- First of all, you have to enable "usb debugging" on your device
Link : https://www.embarcadero.com/starthe...bling_usb_debugging_on_an_android_device.html
2- Now go to your ADB/FASTBOOT folder and in a blank part open "powershell",
Now go to your ADB/FASTBOOT folder and in a blank part open "powershell" .
Holding SHIFT and right clicking open POWERSHELL
now they write "cmd" without quotes so that inside PowerShell you can use it as cmd
3- Here I will explain it in a long but correct way without errors, do not turn off the computer and leave it on since you will write an ADB command to order the device to enter Fastboot mode.
By typing "adb devices" you will find out if the drivers are correctly installed and your computer, cmd and adb/fastboot should recognize it.
now type "adb reboot-bootloader" , this will command your device to reboot into "bootloader" mode
Now this part is important that you pay attention as some people make mistakes.
Once your device has rebooted and you get to the "fastboot mode" screen, you will type the following in powershell :
fastboot devices
If the following appears, it is because your computer detects your device in fastboot mode.
Now comes almost the end of this guide, to install root do the following.
To root your device they usually tell you to type the following "fastboot flash boot boot.img", but sometimes there are errors.
what you will do is the following :
once you have written the following
you are going to drag the "magisk patches" file to the poweshell
and you will have to leave the path where the saved file is (this is a safe way so that you do not get errors)
now you just hit "enter" and it will be installed on your device
Now to finish, restart the device, install "root checker" and you will realize that you have it activated.
attached image of my device "Tab M10 FHD 2nd TB-x606x" with the latest ROM installed, having ROOT, MAGISK and modules installed
THIS PROCESS WORKS WITH ALMOST ALL DEVICES, ONLY IF THEY HAVE THE BOOTLOADER CORRECTLY UNLOCKED WITHOUT THE NEED OF A TWRP.
If the guide helped you, please comment, if it didn't work for you, please comment as I will try to help you solve the problem.
Currently I will not be contributing more to the community since I do not have my own computer, the computer I use will only be there for a few days, after that they will take it away.
when I have a new computer, I will be sharing RecoveryTWRP for some devices modified by me or some other help that I am able to carry out and finish as a project.
I thank XDA for creating this space to help, guide and for everyone to learn in the process.
I send you greetings from Peru.

Nice, thank you very much, sir.