Hi fellas, I'm looking for a bumper/cover that will fit well with the skinomi full skin that is already on my Nexus 4. So far I've tried the Rinke and the Poetic Bumper with no luck: they first doesn't fit, the second causes bubbles over time even without touching the phone.
This period without finding the right cover has already took its tol: just dropped the nexus and dinged the chrome bezel. SO frustrated. Thanks for helping!
I have the Skinomi on front and back, with an official LG/Google bumper on. It works great, I did not bother with the Skinomi protection on the sides of the phone as the bumper is already there.
Dropped my phone onto hard wood floor a couple of times and it's still good as new. I think it's a great combo if you can get a hold of the original bumpers
Leong428 said:
I have the Skinomi on front and back, with an official LG/Google bumper on. It works great, I did not bother with the Skinomi protection on the sides of the phone as the bumper is already there.
Dropped my phone onto hard wood floor a couple of times and it's still good as new. I think it's a great combo if you can get a hold of the original bumpers
Click to expand...
Click to collapse
Exactly...if I COULD get it.. I've always wanted it but never managed to get it. So ironic that my phone is now dented because Google/LG can't even put out a decent number of accessories on the market.
Thanks for sharing your experience.
I can confirm poetic bumper does not work well with skinomi. I ended up sanding the inside edge of my poetic bumper which did the trick.
Thanks! Top bad I already sold it. Anyone knows something that will work just out of the box? I could use it till the OEM bumper comes back available. If it does I'm tired of buying stuff and discovering that it doesn't fit the skinomi is pretty thick don't now if I would buy it again!
Related
What is the thinnest snap-on case? I saw a few "hard cover" cases on ebay but I am skeptical if they are junk. I don't wanna spend $30 on a case, but just want something thin that will protect it from scratches and some bumps.
The sticker protectors are ok, but they don't look the best.
I find that the bodyguardz sticker protectors work wornders. Personally I've used it since 2 months after I purchased my fuze and i don't get any scratches at all and they actually get inconspicuous. No one can tell that I have the stickers on it and it feels really good.
I got a great deal on amazon on a clear plastic case, a solid black case and 2 more screen protectors. Came out to around 8 bucks (including shipping). Check out around there and maybe you can find something nice.
got me a pdair aluminium case for the raphael/touch pro, works great!
I'm a truck mechanic, so I can't use anything else!
Regards,
Emile
damn. that aluminum case sounded so cool! Then it turned out to be hinged.
The aluminum case sucks!!! every time you drop the phone it comes flying out of the case. you have to keep bending back the latch for it to stay closed. the screw in clip in the back striped out in a week.
I'm in concrete, so I wouldn't use this if it was FREE!!!
After having mine for one day and really enjoying it, there are already two hairline scratches on the back, I'm fairly one of them (about 1mm long under the G under "LG") came with the phone, and the other I have no idea, as most people I've baby'd the device since I opened the packaging so there's something going on.
Regardless, it isn't really an issue but I'd like to get a rear protector to potentially stop further hairline scratches, does anyone have any recommendations as the Spigen dual protector has some awful reviews.
Cheers :good:.
Exact Armor
I spent about $7.95 for an Exact Armor case. Its not huge but has enough soft and hard protection where the back would be reasonably well protected. Any case like it would work, but its price sold me.:victory:
Spigen sgp steinheil screen protector for front and back. I love it!
Pardon me if I'm doing something wrong.
I had posted the following text in Nexus 4 Q&A and received 88 views and not one reply.
Just wanted a little help with my situation.
Hello everyone
Okay, So I installed the Google Nexus 4 Case / Bumper Optimized Total Body Skin from Best Skins Ever.
And except for an air bubble the size of a pin hole it came out flawlessly. Very happy.
That is until about three weeks of use with the shell gel case.
First it started to peel at the upper left corner and now at the upper right corner. Not happy.
And after a three and a half foot drop onto slate tile at Starbucks without a blemish. I learned something.
Until something better comes along, changing the case is not an option.
Anyone have experience with a different screen protector and the shell gel case?
I was interested in a hardened glass or something of that nature.
Someone should make a screen/case combo the equivalent to a Casio G-Shock for this fragile beauty.
I'm looking at you Weasel-box.
Anyway, if I posted this in the wrong place and/or did something inappropriate just know that it was not my intention to offend.
Now that I look at it, maybe the OtterBox jab hurt some feelings.
Seriously, any help would be appreciated.
I have the ballistics case and my invisisheold peels up near the front camera every day or so.
Sent from my Nexus 4 @1.5 GHz on Stock 4.2.1
Any plastic screen protector should be fine with the ballistic case.
Invisible shield is a complete rip-off. Get XtremeGuard instead. If you don't like wet apply protectors, get dry ones.
I have this on my phone. And I also have a extra XtremeGuard protector in my desk draw. I have been using XtremeGuard for a very long time and I can say it's top quality.
http://www.amazon.com/Skinomi-TechS...5233&sr=8-1&keywords=nexus+4+screen+protector
Thank you both for the response.
@IRX120 Do you just keep pressing it back into place? That irks the piss out of me when it happens.
@scream4cheese How does the Skinomi feel to you? Closer to glass or that horrible rubbery orange peel that I've come to know from Zagg?
I emailed BSE about my situation on Sunday and quite frankly I thought I was going to get a how-to on reapplying the skin.
Not only did they email me back today, BSE shipped out a complimentary replacement today. No hassle. No questions asked. Didn't even try to hit me up for the shipping cost. Tracy M from BSE was courteous, professional and understanding in resolving my issue. Did not expect that from a screen protector company. If the second skin works, I'll definitely do business with them again. Otherwise, that XtremeGuard or Skinomi.
Regards
Was wondering if there was any new information about this. I have tried both the regular and optimized version for cases and they both get peeled by the Ballistic case.
Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case
flimflam06 said:
Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case
Click to expand...
Click to collapse
I try using the screen protector that came with the ghostek case I bought install it cover the entire front area of phone plus edges let set for about an hour try to put case on but everytime I did it would lift off the sides of the screen protector so I just took off the screen protector till I find that works. Also try the supershieldz ones same thing.
This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6
Omega Ra said:
This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6
Click to expand...
Click to collapse
I was thinking about that one but im not sure about the wet install. I'm good at putting screen protectors on but I've never did a wet install before...i May have to check it out
If you have some time and patience go for the Invisible Shield hd dry full body coverage. I originally ordered a Naked skin from slickwraps but its been processing since the 18th. So when my N7 arrived today I went on the search around town and ended up in a Verizon store. They kindly put it on for me, took two tries lol. Mid-install the Verizon guy just rips it and balls it up and went to grab another. When I got home I went through the packaging and noticed he skimmed me on the install. and didn't install the back.. I tell you what that was the worst torture in my life but hey pics below! Came out beautiful. +extra dbrand lens laying around conveniently . :good: winning
I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.
Phredeee said:
I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.
Click to expand...
Click to collapse
I ended up buying the skinomi matte screen protector which stuck on the edges perfect. Went without a case for a week and then put the spigen neo hybrid on which is my favorite case of all time and it peeled the corners still. I warmed the screen protector and was able to reform the corners a bit and it helped but i still want a problem free combination
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Without clicking the link I'm gonna guess that's the unicorn beetle case. I have that myself and love it. I use the holster while at work
Great case. It works well with a glass screen protector.
I have an armorsuit on this phone, as well as several tablets and phones prior. Was originally skeptical of the curved edge, but it is working great so far. In the past 6 years armorsuits and common sense have kept me from having any cracked screens. And when I upgrade and sell the old phones, removing the armorsuit has always left a perfect as-new screen (but the housings usually have suffered damage from drops, etc.).
Skinomi
duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Is your tempered glass screen protector any good? How is the clarity? Sensitivity?
The clarity and sensitivity is great. I have one on my phone and my fiances phone. This is the third one we bought and its pretty close to the flat ones. Just line it up because the cut outs are exact. No room for error.
Are there any recommended cases that do not interfere with the Whitestone tempered glass screen protector? I know some cases can cause screen protectors to peel up in the corners, since I spent the money on the Whitestone, I want to make sure I don't get a case that won't play nicely with it.
Any recommendations?
Thanks.
I've used the Spigen Neo Hybrid on my Note 8 and now my Note 10. Both have whitestone protectors on them.
https://www.amazon.com/Spigen-Hybrid-Designed-Samsung-Galaxy/dp/B07SXSMXVW
Thanks, I had been looking at some Spigen cases since I previously had one on an S7. Decent cases and not expensive either.
Romans8vs1 said:
I've used the Spigen Neo Hybrid on my Note 8 and now my Note 10. Both have whitestone protectors on them.
https://www.amazon.com/Spigen-Hybrid-Designed-Samsung-Galaxy/dp/B07SXSMXVW
Click to expand...
Click to collapse
Really? I have the neo hybrid on my n10+ and have been eyeing the whitestone. I may just pull the trigger if it works with my current case.
I'm using the flimsy spigen neo flex, dont get me wrong it's a spigen so it works but hate all the finger prints, can scratch easy. The best part of it tho is its case friendly.
ssgunner20 said:
Really? I have the neo hybrid on my n10+ and have been eyeing the whitestone. I may just pull the trigger if it works with my current case.
I'm using the flimsy spigen neo flex, dont get me wrong it's a spigen so it works but hate all the finger prints, can scratch easy. The best part of it tho is its case friendly.
Click to expand...
Click to collapse
It certainly does. It is a perfect fit in my opinion. There is very little space between the screen protector and the edge of the case.
Whitestone protector delivered today, and a complete fail at installation.
I should have known something was up as it was missing the little suction cup, but since I figured that was just needed to remove the guide it should not be a big deal. Watched half a dozen or so videos, felt pretty confident to get started. Took everything slowly, but when I went to move the liquid to the center it kept flowing to the bottom. Even after I laid the phone back flat on my desk, I tried tilting it in the opposite direction, but the fluid appeared to be just running out the bottom between the 2 pieces of the holder.
At that point took everything out and cleaned it off, tried again, this time the glue did not spread to the top of the phone (my desk may not be perfectly level, but it's also not way off either). With the screen protector dropped I tried to coax as much of the glue towards the top as I could. For some reason all the glue seemed to just want to run off the bottom of the phone and then end up between the 2 pieces of the holder/alignment thing. The phone was pushed all the way into it, with the glue initially dropped on the screen it stayed in place, but for some reason after that it just wanted to run off the bottom no matter what.
Ultimately, what I am left with is a bunch of small bubbles and an area around the camera that has no glue. I should have just grabbed a cheap protector and been done with it. Leaving the Whitestone on there for now, even with the bubbles and piece around the camera it is still better than nothing. But, I'm pretty frustrated with the whole thing.
Sorry to hear this, I have been thinking about getting one of thhese whitestone protectors, but then I encounter sad stories, and there are worse ones! I will stick to the tpu/pet/hidrogel ones
It's definitely frustrating as I carefully followed all the steps. The Whitestone does feel great though and the fingerprint reader is not affected at all. Just have the annoying piece by the camera where it didn't stick.
Also, can confirm it works perfectly with the Spigen case mentioned above.
Mostly all of them have worked fine for me so far. I'm eyeing the new Marcel Case by samsung as well .. hope that fits it too
Dang I hope it goes well for me, just ordered 2 yesterday with promo code $52
Sent from my SM-N975U using Tapatalk
Good luck, take your time and you will more than likely be fine. What stinks in my case is I can't fix the messed up piece.
naiku said:
Are there any recommended cases that do not interfere with the Whitestone tempered glass screen protector? I know some cases can cause screen protectors to peel up in the corners, since I spent the money on the Whitestone, I want to make sure I don't get a case that won't play nicely with it.
Any recommendations?
Thanks.
Click to expand...
Click to collapse
Hej...
I'm using Clear Ringke Fusion with Whitestone and there's no problem at all...no peeling on the corners... nothing...
Between case and glass is little space which allows to cooperate perfectly