Wifi issues on all cooked roms? Overclocking side question - HD2 Android Q&A, Help & Troubleshooting and Genera

I have a HD2 with an older version of android cooked on. Android version 2.3.7 Kernel version 2.6.32.15_tytung_r12.4-heebf2c Mod version is CyanogenMod-7.1.0 Desire (Typhoon_v3.7.0 Magldr) I think my radio is 2.15.50.14
I really need the wifi calling feature on my phone to work. Do all the roms have this problem on our phones? Would it be easier for me to just install a new rom? Every time I turn on wifi, the phone freezes completely. I read through the post regarding this issue, but there was no specific information given about how to overclock the phone. I downloaded nofrills cpu control and have tried random combinations, but was wondering the ideal oc speed?

resevil83 said:
I have a HD2 with an older version of android cooked on. Android version 2.3.7 Kernel version 2.6.32.15_tytung_r12.4-heebf2c Mod version is CyanogenMod-7.1.0 Desire (Typhoon_v3.7.0 Magldr) I think my radio is 2.15.50.14
I really need the wifi calling feature on my phone to work. Do all the roms have this problem on our phones? Would it be easier for me to just install a new rom? Every time I turn on wifi, the phone freezes completely. I read through the post regarding this issue, but there was no specific information given about how to overclock the phone. I downloaded nofrills cpu control and have tried random combinations, but was wondering the ideal oc speed?
Click to expand...
Click to collapse
I never used Tytung's GB rom but wifi generally works very well. I used it all the time with Typhoon GB, Tytung's ICS and JB.
For overclocking Install Setcpu from the Play Store.
---
With proper diet, rest, and exercise a healthy body will last you a lifetime... (via Tapatalk)

Can you give me an estimated range I should set my cpu to? I can't find the thread, but somewhere along the line I read something about how you should over clock your processor in multiples of something. I'm not describing it well, but maybe it had something to do with a mhz speed and then a frequency or another unit of measurement for power. Like volts. I have no idea, what I'm trying to say is that I read there is some sort of calculation you need to figure out in order to properly adjust your cpu settings.
ny_limited said:
I never used Tytung's GB rom but wifi generally works very well. I used it all the time with Typhoon GB, Tytung's ICS and JB.
For overclocking Install Setcpu from the Play Store.
---
With proper diet, rest, and exercise a healthy body will last you a lifetime... (via Tapatalk)
Click to expand...
Click to collapse

resevil83 said:
Can you give me an estimated range I should set my cpu to? I can't find the thread, but somewhere along the line I read something about how you should over clock your processor in multiples of something. I'm not describing it well, but maybe it had something to do with a mhz speed and then a frequency or another unit of measurement for power. Like volts. I have no idea, what I'm trying to say is that I read there is some sort of calculation you need to figure out in order to properly adjust your cpu settings.
Click to expand...
Click to collapse
I think that all better apps for this already take care of much of what you are looking for. I know SetCPU does - in fact it has profiles for numerous phones, including the HD2. The one disadvantage that I tend to forget is that it isn't free. If you look at the app's description on Google Play you will get a lot of ideas. Likewise, the developer's web site also has some good info.
Briefly, I do not set any profile's low frequency below 245 MHz (potential SODs). The high-end you can experiment - if the HD2 locks up reboot and set it lower.
I have a default profile and change it to faster MHz if plugged in (I don't care about using more power when plugged in) or lower frequencies for sleep or overheating and such. If you do get SetCPU you can plug in the attached profiles (don't forget to unzip it first!) and see if you like any of them. They can all be changed or deleted, of course.

Related

We can now overclock our phones!

Couldn't really see any discussion on this yet, and personally it's in a location on the forum that I rarely visit but I've found an overclock tool that is slowly becoming very good indeed for our processors. Link to thread is here. I'm soo far up from 528Mhz to 748Mhz (been stable for the past 6 hours no problem). Just make sure to follow the thread (instructions are linked to ensure overclock remains applied through scripts and 3rd party apps). Should take no longer than 30mins for a well versed user to set up. Please don't try this if you haven't got a clue what you are doing as there is soo much scope for error and dead phones! You may also need to customise any scripts to your specific phone/software build. CDMA phones as usual are different from what I've heard. But anyway good luck, I'm gonna keep trying to push the Mhz up (aiming for 850Mhz ).
Not sure its a good idea to go past 700 mhz,our phones run hot as it is under capacity,as with gaming rigs heat is your Enemy,the cooler you keep it the faster.
It's actually remained pretty cool, and when it's in my pocket it's only running at stock clocks anyway. Only when I'm using it does it get to the full 748Mhz. Running wifi router and charger and temps are not noticeably hotter than usual...
um... ive been clocked up to 787 highly stable for the last like 2 weeks. No heat problems, no battery problems, just insane speed.
recommendations: Download v1, not v2. ESP if you dont know what you're doing. Then download the zip im attaching, there's 2 mortscripts in there and a registry addition, THESE MUST BE IN THE STORAGE CARD ROOT. use the regisitry addition FIRST (just associate w/e regedit software you use, then run the .reg file in total commander), then go back to total commander, edit the .mscr "Toggle_boost" and adjust the value boost = "x" to whatever value you want the phone to OC at, eg boost = 41 is 787mhz which is stable for me, test yours out.
THEN, open and install rhodiumkbdcontrol (attached), reboot, go to settings>system>keyboard config> add key
1st pick which key you want to be the OC boost swtich, I have it mapped to my PTT button. click the plus sign, drop down menu, run program, then highlight "run program" in the list then click "..." then type in
Program: \windows\mortscript.exe
Arguments: "\storage card\toggle_boost.mscr"
This time you wanna use the power key.
same general instructions except
Program: \windows\mortscript.exe
Arguments: "\storage card\boost_off.mscr"
then plus sign again, drop down menu, default key action, and click extended emulation. THEN hit update config. should work like a charm, also autoover clocks to 610, the boost button with send you up the w/e the boost = "x" is set to, and then back again, most find 710mhz to be the stable point, and feel free to ask questions
sorry, heres the zips
wouldnt overclocking also gives you a higher chance of frying your CPU chip? cuz ive seen it happened in PCs i just idk about PPCs
I agree that there are virtually no ill effects to this. When unlocked, I have my phone running at 787 mhz. While it is locked or sleeping it throttles down to 604 and eventually 528 mhz. I have noticed no extra heat nor extra drain on the battery. Just blazing fast speed! Sense 2.5 is virually not laggy at all! CHT 1.8.5 is so smooth and quick even with the aminations enabled!
If anyone is interested in the automated clocking process, I can help by giving my set-up that is working flawlessly on the ROM in my signature!
miked79928 said:
I agree that there are virtually no ill effects to this. When unlocked, I have my phone running at 787 mhz. While it is locked or sleeping it throttles down to 604 and eventually 528 mhz. I have noticed no extra heat nor extra drain on the battery. Just blazing fast speed! Sense 2.5 is virually not laggy at all! CHT 1.8.5 is so smooth and quick even with the aminations enabled!
If anyone is interested in the automated clocking process, I can help by giving my set-up that is working flawlessly on the ROM in my signature!
Click to expand...
Click to collapse
Yeah could you hook that up? I think posting it here would be best but pm'ing works just as well
Edit:
I just read threw the above links and guides and was wondering if there is a more automated way of setting this up rather than having to link it to a button press. I'm guessing this has not been figured out yet (or the guides would have mention of it ). Just curious.
dantegl36 said:
Yeah could you hook that up? I think posting it here would be best but pm'ing works just as well
Click to expand...
Click to collapse
Here is the best way I have found to do it. I take absolutely no credit for this:
http://forum.xda-developers.com/showpost.php?p=7354283&postcount=627
Check it!
Outlaw78a said:
Not sure its a good idea to go past 700 mhz,our phones run hot as it is under capacity,as with gaming rigs heat is your Enemy,the cooler you keep it the faster.
Click to expand...
Click to collapse
I have used this, NRG also does. I have NEVER had any problems and mine is as high as 787 as long as I'm running it which is constantly.
XITruthiX said:
um... ive been clocked up to 787 highly stable for the last like 2 weeks. No heat problems, no battery problems, just insane speed.
Click to expand...
Click to collapse
100% agreed. Been running at the highest speeds with NO problems, no batt drain, no heat probs, nothing.
XERO_Racer said:
wouldnt overclocking also gives you a higher chance of frying your CPU chip? cuz ive seen it happened in PCs i just idk about PPCs
Click to expand...
Click to collapse
Not unless you are having excessive heat problems. Since there are basically no people reporting these problems, I wouldn't worry.
miked79928 said:
I agree that there are virtually no ill effects to this. When unlocked, I have my phone running at 787 mhz. While it is locked or sleeping it throttles down to 604 and eventually 528 mhz. I have noticed no extra heat nor extra drain on the battery. Just blazing fast speed! Sense 2.5 is virually not laggy at all! CHT 1.8.5 is so smooth and quick even with the aminations enabled!
If anyone is interested in the automated clocking process, I can help by giving my set-up that is working flawlessly on the ROM in my signature!
Click to expand...
Click to collapse
Once again as stated earlier, 100% agreed.
Do I have to keep plugged in?
miked79928 said:
Here is the best way I have found to do it. I take absolutely no credit for this:
http://forum.xda-developers.com/showpost.php?p=7354283&postcount=627
Click to expand...
Click to collapse
I thank you for this, but I'm not sure how to implement it. I have installed Mortscript, I've copied the code into a file I called overclock.mscr and modified the code reflect the reg values on my Tilt 2. and I've placed the script on the root on my SD card. I've installed MSM7kCpuSpeed on to my SD card. How do I make the script run automatically?
Thank you!
I take no responsibility for w/e happens to your phone with this advice.
Try putting a pointer in your start up to the over clocking script. Its highly unstable and could brick your phone or require a hard reset... thats why I do it with a toggle switch, i dont mind manually applying the OC with a hard key knowing its safe, esp because the situations where I actually NEED 787mhz are less common than needing to just wake the phone to answer a call or make a txt message.
I just want to say that I have been running android on my tilt 2 overclocked at around 750 for a few months now with various builds and i know a lot of other users who have as well with no problems, i am going to try this out, thats what i pay for insurance for hehe
..and after reading more i may have spoken too soon because i missed the posts where i saw that you can brick your phone with OC in WinMo easily enough if you are not careful, so tread with caution
dirtypiratehooker said:
I just want to say that I have been running android on my tilt 2 overclocked at around 750 for a few months now with various builds and i know a lot of other users who have as well with no problems, i am going to try this out, thats what i pay for insurance for hehe
..and after reading more i may have spoken too soon because i missed the posts where i saw that you can brick your phone with OC in WinMo easily enough if you are not careful, so tread with caution
Click to expand...
Click to collapse
Just a note, I'm not sure the insurance would cover burning a custom ROM into the phone, or overclocking the CPU. And if the chip is fried you can't burn the stock ROM back in. But then, they probably couldn't figure out it was updated without in stalling a new CPU. Umm, it would probably work.
Would a .cab for this ever be conceivable?
At this point, we have finally got a script that will work for most Rhodiums, Topaz (Diamond 2), and a few guys with other phones seem to be having good luck.
The device has to have Mortscript installed, and nettrip's MSM7 v2.
It is a single script solution that requires no pre checks in the registry, no key/button assignment, and you can change the speed settings from the script instead of the registry.
It throttles the OC up and down for calls, lock, and sleep, to avoid freezing on wake up and in a call. Some problems that still need to worked out by nettrip in the script. I don't envy him the work as the script(s) were bad enough. Four of us have hit that original script (by jpc) from about page 13.
You copy the script to the SD or the device root, create a shortcut to the file, copy the shortcut to Windows\Startup directory, reset/reboot the device and you are off.
You can use the MSM7 app to read the OC, but you should make sure to exit the app before sleep, lock, or power off, as it will error on reboot if left open.
To be honest, you never have to open the MSM7 app, as the script controls it in the background.
I believe the script is set for a low over clock. 691. My experience has been a 710 average, but a lot get a stable OC at 750+. I am running 748 and I think I will stop there. A 200MHz overclock will just have to do.The phone does not get hot, though with intense use, it does get warmer. Never warmer than when the battery is charging, tho.
I am running the nrg Sense Reference ROM, 23xxx based on Sense 2.5. I added the CHT 1.8x and the editor to save a few MHz, no biggy.
The overclock allows the Sense to work MUCH smoother, actually noticeable as even the weather animation is smooth.
And all the vid players seem to work better.
I have noticed NO extra battery drain than usual.
The script is only a stop gap measure until nettrip finishes his app, but it does work well with little effort. WAAAAY better now than even last week.
However, use the script at your own risk, as you can get too Medieval on the OC. Some guys are running 800+, more nerve than I have.
Anyway, if interested in the script or want to read some more about the app, you can start here
http://forum.xda-developers.com/showthread.php?t=725290&page=89
post #882 has the script.
Plenty of instructions on how to use (and make changes to the settings) in the last 30-40 pages.
Sorry if this is already explained, but can someone tell me in simple details how to keep my overclock at 729mhz even after screen lock or sleep mode? I've tried to follow previous posts but it keeps reverting back to 528mhz after locking and sleep.
Ok so this seems legitamite,everyones checking in with no problems.
other than the increased risk factor that always accompanys speed,
it seems our ppc's cpu was underclocked beforehand ?
i will try this and see if i get a gpu boost as well.
but ivr already experienced my phone overheating to the point
of shutting itself down,and the god-damned orange light is permenantly on...

Froyo roms increase your battery life! try this (UPDATE 08/26/2010)

this may be posted in the wrong section but i would like everyone running froyo to test this out
HERE IS THE LINK TO GET THE LATEST SETCPU
http://forum.xda-developers.com/showthread.php?t=505419
So I have been doing some experiments on ways to save battery life....I think i have made a break through it is not fully tested i would like for some of you to try it out.
with the latest updates to your ROM itself, setcpu, superuser, and the addition of cache cleaner and the incredible AUTOKILLER (a must have) i have been able to run extremely low setcpu sleep profiles without any noticeable loss of performance.
Believe it or not i have my sleep profile down clocked to 19200mhz with out "noticeable" performance loss
i would like for some of you if possible to try these profile out for a while and see how it works out for you
DEFAULT 480min---whatever you want max (mine is 787) ondemand (for performance)
OR DEFAULT 245min---whatever max (for even more battery savings)
SLEEP 192min---480max ondemand (works great even without sleep to wake lag)
it works dont believe me then check out set cpus new feature "time in state"
open setcpu
go over to info
scroll down a little and you will see the times in state your phones cpu runs in the most
you should now see values at the lowest state of 19200
if this works in theory we can benefit from longer battery life
and faster charging
please try these out and report back to the post or PM me...this could be good
Thanks
UPDATE 8/22 EDIT: some users are having success running an even lower default 19min--whatever max (thats even more savings) will be looking into it
try these even lower profiles
DEFAULT 122min--whatever max (screen ON cpu does not drop below 122mhz)
Screen OFF 19min--245max (no lag just ran pandora and cardio trainer at the same time here no lag from sleep to wake either)
or Screen Off 19min--480 max for more performance
REMEMBER not to have conflicting profiles and to have SCREEN OFF at your highest priority
please post here your own findings and results
Thanks again
UPDATE 08/24/2010
after experimenting with other speeds i have finally settled on these speeds for my personal taste on performance and battery savings
MY FINAL SETTINGS...
DEFAULT 19MIN---786 or whatever MAX on demand
SCREEN OFF 19MIN---480 MAX on demand (highest priority) think deeply about why this is the highest
TEMP <40 19MIN---528MAX (screen off overrides this which cools anyway)
BATT <40 19MIN---604MAX
next more into advanced settings....coming soon
UPDATE 08/26/2010
im almost at the holy grail here
try this set up
SCREEN OFF 19--480 (95 priority)
TEMP <40 19--580 (90 priority)
ADVANCED SETTINGS
SAMPLING RATE---100000
UP THRESHOLD---98
ignore nice ---0
power save bias---0
hit apply (if you like it check set at boot)
ALL CPUS ARE NOT CREATED EQUALLY WE ALL KNOW THIS SO DONT EXPECT MY EXACT SETTING TO WORK FOR EVERY SINGLE PHONE
I CAN ONLY OFFER A STARTING POINT BUT ITS UP TO YOU TO TWEAK IT BUT ITS WORK
I HOPE THIS HELPS
things to notice....
in the main screen in setcpu watch the main frequency values bounce up and down...after a few seconds the values seem to stabilize at the lowest frequency of 19
in time of state screen even when screen on most of the time the 19 freq get the most values
i need a few guys to run, test and monitor the values that i just posted ^^^HERE^^^
this may further the battery life once we stabilize the frequency to 19 most of the time while keep the SAME performance which i think i may have did
run some linpacks and quadrants with those setting
i got
5.4 linpack running 787max
431 quad running 787max
then it drops back to 19 and stabilizes
hope this works and please post all your feed back and setting so we can learn this and get it perfect
thanks
I even use 122 and 480 for my screen off profile.. And I don't have any lag at all.
thisisreallygay said:
I even use 122 and 480 for my screen off profile.. And I don't have any lag at all.
Click to expand...
Click to collapse
19 is even lower try it
Oh 19200? Wow I wasn't paying attention well enough. I'll try it.
Almost from the beginning of my rooting in May and using SetCPU, I've been using 19.2- 748.8 (on demand) with the screen on (sometimes higher but recently reduced the max to see if it helped with some FC's I was having - still haven't determined if it was the profile or the ROM that fixed my FC's).
I use 19.2-245 for screen off. I'd venture that there's about a one second delay for the caller ID to work once a call rings in, but it's more than bearable and worth it.
I have it go to 19.2-528 when the battery is less than 25%,and 19.2-480 if the temperature is above 49 degrees celcius.
I wonder what it's like when receiving a call. I just set it and I'm not having any lag with just turning it on or anything. I'll test it out with other things. I hope this greatly improves my battery.
roirraW "edor" ehT said:
Almost from the beginning of my rooting in May and using SetCPU, I've been using 19.2- 748.8 (on demand) with the screen on (sometimes higher but recently reduced the max to see if it helped with some FC's I was having - still haven't determined if it was the profile or the ROM that fixed my FC's).
I use 19.2-245 for screen off. I'd venture that there's about a one second delay for the caller ID to work once a call rings in, but it's more than bearable and worth it.
I have it go to 19.2-528 when the battery is less than 25%,and 19.2-480 if the temperature is above 49 degrees celcius.
Click to expand...
Click to collapse
shame on you for keeping that secret all to yourself
SHAME
By the way why did you say froyo roms specifically? I'm trying this on tainted tenzo and it's working. I'm usually on a frooy ROM though.
Hi Guys,
Can you please tell me how to get setcpu? I can't find it in the market.
Sent from my Nexus One using XDA App
Search for it on his website, idk what his website is you'll have to search for it. Or download a ROM with it already in it.
im on froyo 30 and was unable to get the 19.2 to show on time in state with screen off profile set to 100 priority at 245/19.2
i was however able to have it start using that frequency by using 710/19.2 as my default setting, then enabling the 245/19.2 profile as screen off.
ive read its not too good to have the cpu jump more than 300mhz per profile though so im not sure how this will work out.
thisisreallygay said:
By the way why did you say froyo roms specifically? I'm trying this on tainted tenzo and it's working. I'm usually on a frooy ROM though.
Click to expand...
Click to collapse
hmm last time i was on sense rom sense fell apart if you clocked lower than 245
epically receiving a phone call
but i only test this method on froyo
I've heard that too. Although I don't know what is bad about it.
sh_mohanna said:
Hi Guys,
Can you please tell me how to get setcpu? I can't find it in the market.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
HERE
http://forum.xda-developers.com/showthread.php?t=505419
eklipze said:
im on froyo 30 and was unable to get the 19.2 to show on time in state with screen off profile set to 100 priority at 245/19.2
i was however able to have it start using that frequency by using 710/19.2 as my default setting, then enabling the 245/19.2 profile as screen off.
ive read its not too good to have the cpu jump more than 300mhz per profile though so im not sure how this will work out.
Click to expand...
Click to collapse
i heard that too but all froyo dev have a 245 to 710 stock on their roms
thats why i kinda spilt the two profiles and why 245min--- is experimental
leave your screen off for a while and see if the ime of state shows up
also make sure not to have conflicting profiles running in setcpu
Hmm. Well tainted is vanilla but has some sense elements (like sense dialer) So idk. It seems to work. I'll test out calls.
thisisreallygay said:
Hmm. Well tainted is vanilla but has some sense elements (like sense dialer) So idk. It seems to work. I'll test out calls.
Click to expand...
Click to collapse
oh ok tainted is not vanilla
tainted IS sense with sense removed with vanilla remaning hence the word tainted
some sense is still there
i think
Yeah it's got sense contacts and stuff but vanilla messaging. But it has the sense dialer so I think it would also have lag with calls if the sense ones were having lag. And I just tested it and it took a lil while for it to recognize whose number it was but it still gave me plenty of time to answer the call. I'll be testing to see how it improves battery. Thanks for the find
Im also testing setcpu Advanced settings batery life (without performance loss)
What settings are those?

[Q] movie, games and heat problems

Hi I found this problem recently with all newer Builds. If I watch movies or play any game for at least 45 min I think the phone over heats and freezes.
I used to watch a bunch of movie before in older builds without this problem but at the time those build had a bunch of lil problems so that's why I don't go back to those build and the builds are perfect and this is the only problem I get.
I want to know if u dont have this problem what Radio you are using and windows mobile I dont think its a problem with the builds but a combination of maybe RADIO and winmo.
My Radio is 2_12_50_02_2 and wimo is ChuckyDroidROM I also should say that I think is the Radio I dont like messing with them cause some might brick ur phone that why I would like to see what radio u using before I try to use them.
Yeah... I have the same problem and I can't get over it.
I checked the temps for my phone last night, droped the battery to 40% and started charging it.
Was watching a movie with the phone charging, audio thru bluetooth, WiFi on screen on (of course ), and after almost 2 hours the temp went up to 37C, and thats tge highest I saw it.
Im using desire_hd2 Build by Cedes.
zephyrot what Radio and wimo are using?
Using Stock Deutschland ROM 3.14.407.2. With Stock Radio.
Everything working perfectly so far, been running Android for a few months, always on Stock ROMs without issues. (Unbranded Stock ROM btw).
Gonna make a stress test and post the temp results in a bit.
Did the tests.
1.5 Hrs with: Charging Phone + Music in the background + Wifi + Bluetooth + CPU @ 1.19GHz + Neocore on infinite Loop >> 38C highest temp.
Did the same test with Nenamark, and got the same results.
Ambient temp: 22 C.
Ill try another test with GPS + GMaps + Music thru bluetooth + Charging tomorrow and check the temps.
Thans zephirot I have a TmobileUSA hd2 so I dont know if i can havethat radio but it sould hlp ppl with the normal hd2... also the build i have everything works i can listen to music all day with no poblems.
The problems start when watching movies like for an hour or a bit less the phone would get a temp of like 40 C and freeze.
The latest T-Mobile ROM should have that radio (2.15.something), just be sure to check out SSPL/SPL/HSPL compatibility, since 3.03 SPL is not compatible yet with latest HSPL. Leaving ya at 64 MB usable ram
Kinda weird your high temps, you using SetCPU? Try lowering the MAX Speed to 998Mhz (1.19Ghz should run just fine), and use one of the latest Builds.
Best ones so far for me have been:
http://forum.xda-developers.com/showthread.php?t=823491
And:
http://forum.xda-developers.com/showthread.php?t=857261
The second being more tricky and requiring some work to work as intented, but BY FAR the fastest Build I've used
Zephyrot said:
The latest T-Mobile ROM should have that radio (2.15.something), just be sure to check out SSPL/SPL/HSPL compatibility, since 3.03 SPL is not compatible yet with latest HSPL. Leaving ya at 64 MB usable ram
Kinda weird your high temps, you using SetCPU? Try lowering the MAX Speed to 998Mhz (1.19Ghz should run just fine), and use one of the latest Builds.
Best ones so far for me have been:
http://forum.xda-developers.com/showthread.php?t=823491
And:
http://forum.xda-developers.com/showthread.php?t=857261
The second being more tricky and requiring some work to work as intented, but BY FAR the fastest Build I've used
Click to expand...
Click to collapse
the HSPL is the thing I install before changing roms right?
I remember I install like 2.008
almost solved
ok ppls I've try changing the wm rom and Radio and for what ive found the phone will free either way no matter what So I think it has to be a problem with the newer builds.
My build is overclock but I had it to not go over the normal amount of speed 900 MHz and the phone would freeze after watching a movie for at least 40 min.
Now what I found that if you underclock the CPU like I did to 400-500 the phone would last much much longer even when charging. I got like 2 hours of movie and then let it cool down while charging.
also I dont know if this is important but I use Rockplayer to watch my movies and this couldnt be the reason for the freeze either cause ive been using it forever.
But I hope this help any other person who had this kind of problems.
Im having same issue but it gets hot and restart after 10-20 minutes of hard use.
Im having theory it could be microSD card getting hot becouse of phone. IM not sure.
but i tried different ROMS, radios and Androids its the same problem.
deniboy try lowring the cpu speed with set cpu to 400-500 I had it and 400 and see how it goes.
also everything else works fine on my build like Internet speed always fast no disconect and no errors this is the only thing bothering me.
eddym123 said:
deniboy try lowring the cpu speed with set cpu to 400-500 I had it and 400 and see how it goes.
also everything else works fine on my build like Internet speed always fast no disconect and no errors this is the only thing bothering me.
Click to expand...
Click to collapse
400 minimum or maximum and with what governor????
I have it on ondemand dont know if there is a difference but I do know it will run cooler and the cpu runs slower

Overclock Cyanogen settings

I have rooted abdroid 2.3.4 with cyanogen 7 and in the settings there is one that i can change the maximum value to cpu...Now is at 998....what value above that is the safest to choose with out the phone have any problem???
depends which rom it is
some can go up to 1.5 and some cant
Can also depend on the phone, I have 2 hd2s, one chuggs along nicely at 1075mhz, the other gives random slowdowns / hangs (4-5 a week,not lots but enough to be a pain) at any setting above 921mhz. Same rom,same installed apps, same data.
Well here are the Phone Info
Model
HTC HD2
Andorid
2.3.4
.......
15.42.50.11U_2.15.50.14
Kernel
2.6.32.15_tytung_r10-gbdfeaac
Mod Version
CyanogenMod 7-05252011-NIGHTLY DESIRE
GRJ22
Anyone?
Sent from my HTC HD2 using XDA App
The best thing to do is scale up gradually, try each step above 998. OC then try it for 24hours, then try a step up and try it for 24 hours and so on. Do not check set at boot though just in case you pick a speed that causes problems.
What can go wrong???How do i see that it cant support a number??We are talking about maximum price and not all the time...???Someone that tried and have it overclocked????
What can go wrong???
It coukd stop booting and require a hard reset/backup restore.
How do i see that it cant support a number??
It will start to give force closes, hang, reboot, feel sluggish..
We are talking about maximum price and not all the time...???Someone that tried and have it overclocked????
Do a cwm backup and just try it, worst case scenario is it doesn't boot and you have to restore.
ntisco said:
What can go wrong???How do i see that it cant support a number??We are talking about maximum price and not all the time...???Someone that tried and have it overclocked????
Click to expand...
Click to collapse
I would guess that the majority of users are overclocked. I, for example, am running my phone smoothly at 1.2 GHz without problems, but to be honest I scarcely notice the difference with overclocking. Dorimanx's kernel with 1.61 GHz overclock didn't really perform any better than Tytung r14 at 1.2 GHz.
Just do as the others said and try it out whilst making sure to uncheck 'set on boot', but I think any speed should really be fine.
I don't know what the general opinion is on this (some devs say it isn't a good app) but use setCPU in order to create profiles if you want, thus being able to reduce your standby battery drain and stuff like that
In the quandra the info of the phone whrites that the cpu is up to 1190mhz and know is at 998.Is this true?Can it go that much?
If so we can put it at 1113 that its safe?
I know that i ask again and again but i dont want the phone to lose or damage
Youre best bet would be to download setCPU and try different clock speeds . the thing about setCPU though is it has a stress test . So after you set a speed . you can run the stress test to test if its too high a value or if you are safe to run at that speed . just dont tick the box that says "apply at boot"
My phone (currently Dorimanx ROM) is stable at 1536MHz. On Cyanogen it was similar. On 1612 it had freezen for a few times while watching a flash video on youtube. Set it to 1,4GHz, and it should work fine. Phone will not damage, data too. Just as they written above, do not click apply at boot.
And make stress test for more than 10 mins, because I have done it for 10 mins, and as I written, it had freezed during YT watching.
The topest that it has is 1190..that is the last option !!!I put it at 1113 for one day know and i made a profile to go 573 when i close the screen.
Tomorow i try the next option antil 1190 ...and we will see
Tytung r10? Why not upgrade to another Kernel?
I think that's the core issue. Dorimanx kernels i.e. can be clocked solid to 1.2ghz
Oh, I've completly forgotten. I have used Dorimanx kernel with Cyanogen. But it doesn't let you reinstall rom from settings (Factory reset). You need to reinstall rom from zip or restore backup in CWM. On 1190 it will work stable for ever

[HELP] Overheating issues

Hi everyone,
Thanks for reading this . As specified above, my phone has a rather serious problem of overheating. To try and reslove the issue I tried modifying the CPU frequency, to set it low enough. And a very bizarre thing just happend.
Opening Kernel Adiutor, I saw that 4 out of my 8 cores (the 2.5 ones) were running normally. No overclock, stock settings, stock governor and so on. The issue seems to be in the other 4 (the 2.3 ones). Both the minimum and highest frequency allowed is set up to the same parameter (1556 mHz), forcing it to stay at maximum clock all the time. I tried modyfing via Kernel Adiutor the settings, lowering the minimum frequency allowed to stock one (which should be around 300 or something), but it had no effects: it immediatly comes back to 1556 and just won't come down.
All of this started happening after i removed Franco Kernel from my system, flashing another ROM (Chroma) with a different kernel altogether. I'm currently on Cataclysm ROM and after doing a clean install, formatting internal storage as well as every other partition, i couldn't resolve the issue. Moreover, Kernel Adiutor sometimes won't even show my CPU settings, stuck on an infinite loading. If anyone could help me, it would be much appreciated. It's really important. I'm by no means Android expert but i do have a rather basic understanding of ADB and so on.
Thanks a lot for your time.
-LVBNR5
I used to own a n7 and that allowed me to set min and max freq. with apps fine but i am also seeing this on my 6p, i don't notice any "overheating" although it may be due to me being used to it always running hot since i run a lot of heavier programs and also you know... SD810 but i guess it does the frequency thing as a way that frequency is actually controlled on this platform or something, because it sticks fine to the limits you set while flashing a kernel but no app can get it to stick. Then again this is just me sharing my experience with it as it is my first phone with this platform, so maybe someone who knows more about this could offer some help.
ml11ML said:
I used to own a n7 and that allowed me to set min and max freq. with apps fine but i am also seeing this on my 6p, i don't notice any "overheating" although it may be due to me being used to it always running hot since i run a lot of heavier programs and also you know... SD810 but i guess it does the frequency thing as a way that frequency is actually controlled on this platform or something, because it sticks fine to the limits you set while flashing a kernel but no app can get it to stick. Then again this is just me sharing my experience with it as it is my first phone with this platform, so maybe someone who knows more about this could offer some help.
Click to expand...
Click to collapse
Thanks anyway, i really appreciate it!

Categories

Resources