Related
I tried to create a CM7 bootable SD card per the thread entitled "Size-agnostic SD Card image and CM7 installer for SD Cards. with updater."
I used WinImage to create the supposedly bootable SD card with the installer, placed it into my Nook which was fully off, and the Nook booted as usual instead of from the SD card.
Am I missing something? How do you boot from an SD card?
Is there such a thing as a boot choice menu like on my PC or is the default always to boot from the SD card?
Does the Nook have to be rooted for this to work?
Thanks
ETA: My PC shows the uSD card as nearly full, but my Nook shows the SD card as nearly empty (1.74 out of 1.84 GB available).
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
angomy said:
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
Click to expand...
Click to collapse
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
JowBe said:
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
Click to expand...
Click to collapse
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
angomy said:
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
Click to expand...
Click to collapse
Yes, I ran WinImage as administrator. And yes, it shows up in Windows explorer as boot and yes those files are there.
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
JowBe said:
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
Click to expand...
Click to collapse
I'm not sure, because I ran through initial registration on stock prior to running CM7 off SD --- I used the same image (verygreen's agnostic at http://forum.xda-developers.com/showthread.php?t=1000957) as you did without a hitch.
If you decide to run CM7 off internal sometime you're going to need to register the nook anyway.
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
An update: I decided to try to create a bootable SD from another bootable image (MonsterRootPack with CWR). This time the nook wouldn't even turn on. I'm going to try to create a third bootable SD as angomy has suggested to see what happens.
I need to add that when I removed the uSD card, it booted normally.
Also, when I create the bootable SD with winimage, I get a dialog box that tells me that the format of the SD card is not right and asks me if I want to resize the image. But this happened on both the images. I don't know if this has anything to do with it.
angomy said:
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
Click to expand...
Click to collapse
Ok, I tried the CWR image in the link you gave. Same problem - no-go. Just sits there dead. I remove the uSD and it boots normally.
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
ebubar said:
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
Click to expand...
Click to collapse
Thanks for the link. I have given this some thought, and it doesn't seem reasonable that booting from an SD card should depend upon the state of registration of the device because the whole idea of booting from an SD card means that the content of the SD card is loaded in the place of the stock software.
robot8 said:
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
Click to expand...
Click to collapse
Thanks. Yes, I just replied to another poster that I didn't think that the state of registration of the device should matter since the whole purpose of a bootable SD card is to load the contents of the SD in place of the stock.
I have followed the instructions in verygreen's thread to the letter - several times. Also, I have tried to make other bootable SDs without success. But that's a good idea about trying Win32diskimager. Also, I will try a Sandisk class 4 card SD as soon as I can get to a store.
I do have a question. When I format the SD card what "allocation unit size" should I be using? (formatting through Windows) The default is 32 kb.
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Congrats!
Re: allocation unit size, do you mean cluster size? Depends on how big the FAT32 partition is --- larger clusters used means more actual space used but too large a size can reduce access speed. Generally Windows defaults to suggested 4k for up to 8GB, 8GB-16GB = 8k, 16-32GB = 16k, and 32+ = 32kb.
Also the first boot is the longest --- shouldn't take as long after that. Welcome to CM7 - I don't regret installing it over stock after waffling for weeks on whether or not I'd use stock at some point -- CM7 is just too much faster with too many more options and tweaks for my impatience to deal with stock Froyo.
THANK YOU OP!
I had the same issue, tried 20x various ways, 2 different computers, 2 different SD readers, and it was WinImage that wasnt working correctly. Win32DiskImager solved it.
Thanks.
JowBe said:
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Click to expand...
Click to collapse
Thanks so much! This finally got it to work for me too. Loving my new Android tablet
FWIW, WinImage does not work. Maybe it used to work, but it does not now. I posted about this a few days ago here.
Ok I wrote the generic image file to sd card through winimage or whatever its called. Then I went here: http://download.cyanogenmod.com/?device=encore. I downloaded the first one dated 7/8/12 and put it on the sd card also. I installed sd card in nook and turned on. It went through a bunch of installing but the last few sentences say:
"Looking for the install images...
Initial install files not found.
Please download it from nook.linuxhacker.ru
and put on first partition of this SD Card
the name should start with updatei-cm and end with .zip"
What does this mean and what am I doing wrong? Right now looking at the SD card file on my computer i see files: MLO, u-boot, uImage, URamdsk, and a zip folder that says: cm-7-20120701-NIGHTLY-encore. I did not unzip the file, all I did was download it right to the computer and dragged to SD card and I even tried downloading straight to to SD Card and no luck.
You can download CM7 RC 3 from the same source and try to add itfirst. If it loads,then rename your other zip with an update_ prefix, put it on your boot partition, boot into recovery and you should be where you want to be. (You'll prolly need to install GAPPS zip after first load of RC3 to get google apps, too).
Follow advice on lepanlar's tip site and you won't go wrong.
TheKid1 said:
Ok I wrote the generic image file to sd card through winimage or whatever its called. Then I went here: http://download.cyanogenmod.com/?device=encore. I downloaded the first one dated 7/8/12 and put it on the sd card also. I installed sd card in nook and turned on. It went through a bunch of installing but the last few sentences say:
"Looking for the install images...
Initial install files not found.
Please download it from nook.linuxhacker.ru
and put on first partition of this SD Card
the name should start with updatei-cm and end with .zip"
What does this mean and what am I doing wrong? Right now looking at the SD card file on my computer i see files: MLO, u-boot, uImage, URamdsk, and a zip folder that says: cm-7-20120701-NIGHTLY-encore. I did not unzip the file, all I did was download it right to the computer and dragged to SD card and I even tried downloading straight to to SD Card and no luck.
Click to expand...
Click to collapse
Just make sure the file name starts with update- instead of cm- and all will be well.
Sent from my Nook Color running ParanoidAndroid and Tapatalk
leapinlar said:
Just make sure the file name starts with update- instead of cm- and all will be well.
Sent from my Nook Color running ParanoidAndroid and Tapatalk
Click to expand...
Click to collapse
Thank you so much, that worked. Yay!!!
leapinlar said:
Just make sure the file name starts with update- instead of cm- and all will be well.
Sent from my Nook Color running ParanoidAndroid and Tapatalk
Click to expand...
Click to collapse
I couldn't believe this was such an easy solution to such a frustrating problem. All I had to do was change a file name from "cm" to "updat". Thank you!
Hi, i am an absolute noob! I tried updating to CM10 from CM7 on my Nook Color. I got the same error message and did also try update instead of cm. But I keep getting the same message. Additionally the message also says "Please put on first partition of this SD card." I tried this with an 8 GB class 4 Strontium card. After I first burnt the image onto the SD card, after that the SD card reads as "boot" with 297 mb of 297 mb remaining. By the time I burn the image again and then load the update/cm.zip and gapps-jb.zip there is only 50.1 mb remaining. What could be the problem?
Also, I note that after an unsuccessful attempt only the image remains when I view the SD card on the computer. I have to then again copy the update/cm.zip and gapps.zip file. Any assistance would be much appreciated! Cheers,,
leapinlar said:
Just make sure the file name starts with update- instead of cm- and all will be well.
Sent from my Nook Color running ParanoidAndroid and Tapatalk
Click to expand...
Click to collapse
akn2102 said:
Hi, i am an absolute noob! I tried updating to CM10 from CM7 on my Nook Color. I got the same error message and did also try update instead of cm. But I keep getting the same message. Additionally the message also says "Please put on first partition of this SD card." I tried this with an 8 GB class 4 Strontium card. After I first burnt the image onto the SD card, after that the SD card reads as "boot" with 297 mb of 297 mb remaining. By the time I burn the image again and then load the update/cm.zip and gapps-jb.zip there is only 50.1 mb remaining. What could be the problem?
Also, I note that after an unsuccessful attempt only the image remains when I view the SD card on the computer. I have to then again copy the update/cm.zip and gapps.zip file. Any assistance would be much appreciated! Cheers,,
Click to expand...
Click to collapse
It needs to be update-, with the dash.
Also, if going to CM10 from CM7, you need to reburn your SD with the new image from my updated instruction thread linked in my signature. The old image will not work properly with CM10.
Sent from my Galaxy Tab running Tapatalk
Thanks for the quick response. I did use update- . Also, the thread you mentioned was the one I used to attempt the upgrade. Somehow it isn't working. This is the full message
"it appears that the sd card is already properly formatted initial install files not found"
leapinlar said:
It needs to be update-, with the dash.
Also, if going to CM10 from CM7, you need to reburn your SD with the new image from my updated instruction thread linked in my signature. The old image will not work properly with CM10.
Sent from my Galaxy Tab running Tapatalk
Click to expand...
Click to collapse
akn2102 said:
Thanks for the quick response. I did use update- . Also, the thread you mentioned was the one I used to attempt the upgrade. Somehow it isn't working. This is the full message
"it appears that the sd card is already properly formatted initial install files not found"
Click to expand...
Click to collapse
And when you put the SD in the PC, you can see the cm- zip? It needs to be named just right, beginning with cm- or update- and ending in .zip
You have gotten past the hard part, getting it to boot in the first place. You just are not getting the files right. If it is on the card and named right it would try to install. And since you put both the cm zip and the gapps zip there, one or both should try to install. They must not be on the card right.
Sent from my Nook HD+ Running CM10 on SD
The strange thing is that after I put back the SD after an unsuccessful install, I can no longer seem the cm-.zip and gapps-,zip files. I can see that they are successfully copied onto the SD card after first burning the image and taking out the SD card and then copying those two files like you mention in your post.
After I first burned the image onto the SD card and then deleted it after the first unsuccessful attempt, the SD card shows up as a boot drive and only shows 297 MB space available and after the image and the two files are copied as above then only 50.1 MB space is left available.
Can't figure out where it's going wrong.
leapinlar said:
And when you put the SD in the PC, you can see the cm- zip? It needs to be named just right, beginning with cm- or update- and ending in .zip
You have gotten past the hard part, getting it to boot in the first place. You just are not getting the files right. If it is on the card and named right it would try to install. And since you put both the cm zip and the gapps zip there, one or both should try to install. They must not be on the card right.
Sent from my Nook HD+ Running CM10 on SD
Click to expand...
Click to collapse
---------- Post added at 08:22 AM ---------- Previous post was at 08:01 AM ----------
"lost page write due to i/o error on mmcblkp1" this also shows up before the program does the "inflating" and finally boots
also during this process, an error something along "unzip: write no space left on drive" also appears
akn2102 said:
The strange thing is that after I put back the SD after an unsuccessful install, I can no longer seem the cm-.zip and gapps-,zip files. I can see that they are successfully copied onto the SD card after first burning the image and taking out the SD card and then copying those two files like you mention in your post.
After I first burned the image onto the SD card and then deleted it after the first unsuccessful attempt, the SD card shows up as a boot drive and only shows 297 MB space available and after the image and the two files are copied as above then only 50.1 MB space is left available.
Can't figure out where it's going wrong.
Click to expand...
Click to collapse
akn2102 said:
The strange thing is that after I put back the SD after an unsuccessful install, I can no longer seem the cm-.zip and gapps-,zip files. I can see that they are successfully copied onto the SD card after first burning the image and taking out the SD card and then copying those two files like you mention in your post.
After I first burned the image onto the SD card and then deleted it after the first unsuccessful attempt, the SD card shows up as a boot drive and only shows 297 MB space available and after the image and the two files are copied as above then only 50.1 MB space is left available.
Can't figure out where it's going wrong.
---------- Post added at 08:22 AM ---------- Previous post was at 08:01 AM ----------
"lost page write due to i/o error on mmcblkp1" this also shows up before the program does the "inflating" and finally boots
also during this process, an error something along "unzip: write no space left on drive" also appears
Click to expand...
Click to collapse
Alright, I know what is wrong. It is that strontium card. You need to use a SanDisk class 4 card. You are getting read/write errors on that card. I had that happen to me when I used a cheap card. Find a quality SanDisk.
And those file sizes are correct. That is what it is supposed to say.
Sent from my Nook HD+ using XDA Premium
Thanks. Will try that and update.
leapinlar said:
Alright, I know what is wrong. It is that strontium card. You need to use a SanDisk class 4 card. You are getting read/write errors on that card. I had that happen to me when I used a cheap card. Find a quality SanDisk.
And those file sizes are correct. That is what it is supposed to say.
Sent from my Nook HD+ using XDA Premium
Click to expand...
Click to collapse
Similar problems here. I'll explain step by step what I did and maybe someone can tell me where I went wrong.
I'm using a MacBook Air running 10.8.3 (not that it makes a difference, but I am using Terminal and DiskUtility for some of these operations).
I'm trying to install Cyanogenmod on a Nook Color 1.4.3 following the directions given here.
1. Downloaded generic-sdcard-v1.3.img and cm-10.1-20130521-NIGHTLY-encore.zip
2. Installed the .img on a SanDisk 4GB microSD card. Ejected it, remounted it, it mounts as a single partition named "boot" that's 121 MB in size with 112 MB available. The files on "boot" are MLO, u-boot.bin, uImage, uRamdisk.
3. Tried to copy cm-10.1-20130521-NIGHTLY-encore.zip to "boot" but there is not enough space.
In a previous attempt, I forgot to copy the cm-10 file to "boot" and was able to get the linux sdcard image to temporarily mount on my Nook, but then received the error mentioned earlier by someone else:
Initial install files not found.
Please download it from nook.linuxhacker.ru
and put on first partition of this SD Card
the name should start with updatei-cm and end with .zip
Click to expand...
Click to collapse
Then, when I ejected "boot" and mounted it on the Airbook, I saw two partitions: "boot" and "CM7 SDCARD." The latter partition had plenty of room for the cm-10.1-20130521-NIGHTLY-encore.zip file, so I put it on there. But it didn't matter if I leave the filename as "cm-" or change it to either "updatei-cm-" or "update-cm" or whatever; the same error occurs.
What am I doing wrong? I assume there is a way to force the sdcard image to create a "boot" with plenty of room for the cm-10 zip file. But how? And do I rename the cm-10 to updatei-cm-10 or what?
Thanks in advance.
jjjmills said:
Similar problems here. I'll explain step by step what I did and maybe someone can tell me where I went wrong.
I'm using a MacBook Air running 10.8.3 (not that it makes a difference, but I am using Terminal and DiskUtility for some of these operations).
I'm trying to install Cyanogenmod on a Nook Color 1.4.3 following the directions given here.
1. Downloaded generic-sdcard-v1.3.img and cm-10.1-20130521-NIGHTLY-encore.zip
2. Installed the .img on a SanDisk 4GB microSD card. Ejected it, remounted it, it mounts as a single partition named "boot" that's 121 MB in size with 112 MB available. The files on "boot" are MLO, u-boot.bin, uImage, uRamdisk.
3. Tried to copy cm-10.1-20130521-NIGHTLY-encore.zip to "boot" but there is not enough space.
In a previous attempt, I forgot to copy the cm-10 file to "boot" and was able to get the linux sdcard image to temporarily mount on my Nook, but then received the error mentioned earlier by someone else:
Then, when I ejected "boot" and mounted it on the Airbook, I saw two partitions: "boot" and "CM7 SDCARD." The latter partition had plenty of room for the cm-10.1-20130521-NIGHTLY-encore.zip file, so I put it on there. But it didn't matter if I leave the filename as "cm-" or change it to either "updatei-cm-" or "update-cm" or whatever; the same error occurs.
What am I doing wrong? I assume there is a way to force the sdcard image to create a "boot" with plenty of room for the cm-10 zip file. But how? And do I rename the cm-10 to updatei-cm-10 or what?
Thanks in advance.
Click to expand...
Click to collapse
The problem is you are using an old image zip that was made for CM7. You need to get my image updated for CM10 from my NC updated SD install instruction thread linked in my signature. Follow the directions there.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
The problem is you are using an old image zip that was made for CM7. You need to get my image updated for CM10 from my NC updated SD install instruction thread linked in my signature. Follow the directions there.
Click to expand...
Click to collapse
Thank you, this was very helpful. I'm not sure how I overlooked the CM7/CM10 issue -- another pair of eyes is always useful.
Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help
Stjpa said:
Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help
Click to expand...
Click to collapse
Are you unzipping the right file? You said something about with stock recovery and without. Those are not image files that can be burned. When you unzip my image zip file, you should end up with a 300MB .img file. That is what you burn with win32diskimager. And take the card out of the PC and put it back in before you try to look at it. And be sure to use an external card reader, not one built into your PC.
Sent from my Nook HD+ using Tapatalk
Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.
Stjpa said:
Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.
Click to expand...
Click to collapse
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
Yes I did unzip the image file before I burned it. I ended up finding a cwr zip that was for a 4 gig card, probably an older way of doing it, and that worked for some reason. I did use your stock 1.4.3 zip though and all seems well. Your tips page is great, thank you, you're very helpful now I can play around and brick it again with some other stuff.
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
No nothing was done by B&N. It is how you are burning the card. It will not boot in the nook unless burned perfectly. Look at my tips thread linked in my signature and read items A9 and A10.
There not any easy was not to use a bootable recovery card. Just keep trying, using different software, different cards, different PC s, different card readers.
Sent from my Nook HD+ using Tapatalk
ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
Use win32diskimager instead and use an external card writer. The image is approximately 300mb with the Rev5 file. Then copy the CM10 and 2021011 GApps zips to SD card. Insert in Nook Color. Wait for setup to finish and shut down. Start Nook. Enjoy.
UPDATE 05/28/13 - Now that verygreen has changed his SD scheme to his new version, this guide should not be used on his ROMs dated 5/27 or newer. Use his new image and follow his new instructions. If you want to see the old instructions click on the Show Content button below.
Click to expand...
Click to collapse
Many users have had difficulty installing the HD+ CM10/10.1 ROMs using the Original/Legacy (verygreen) SD setup (especially Windows users). I have written this guide and have made some tools that should make it easier. No need for ADB or Linux. I have upgraded the CWM (clockworkmod) recovery to version 6.0.2.8 which includes larger fonts, a brighter screen and the ability to use the internal storage for installing zips and performing backups. It also uses verygreen's process from his early4 zip that aligns partitions at 2M. This guide and tools are for the Original/Legacy SD setup by verygreen, not the Hybrid. If you want the Hybrid, go here.
Setting up the SD
Begin by downloading the files you need either with stock or your PC. You will need my updated SD image file, attached below (do not use the early4 image from the verygreen thread), the CM ROM zip you want to install and the gapps zip to match it. Put the last two zips on your internal media sdcard built into the HD+. You can get the HD+ CM10 ROMs here and the HD+ CM10.1 ROMs here. You can get the gapps zips here, 20121011 for CM10 and 20130301 for CM10.1.
Extract the SD image zip and you will have a 117MB .img file. Burn that to your SD with Win32DiskImager in Windows or the dd command in Linux or OSX. The SD needs to be at least 4GB and preferably a SanDisk Class 4.
To use Win32DiskImager, find it on the web (here, it's free) and install it on your Windows PC. Open it (be sure to run it as administrator) and select the drive (device) that has your card reader with your SD inserted. Then in the image file box put the location where you have the extracted img file. Then when everything is set right, click on the write button. A warning will pop up asking if you want to proceed. When you have verified that you are going to write to the correct device, click on Yes. (One user overwrote their external USB hard drive by not verifying first.) If you get an error message about access denied, it means you are looking at the drive with Windows Explorer. Close Windows Explorer and try again. In fact, it is a good idea to close all unnecessary windows when burning, even your browser.
When burning is complete, insert the SD into the Nook and boot. It should boot to the cyanoboot logo and sit there for a little while while it creates the other partitions on the SD and formats CM10SDCARD. Then it will end up in CWM for HD+ Original SD. If it does not leave the cyanoboot logo within a reasonable time (it hangs sometimes), just touch the power key and CWM should come up. To use CWM, press the volume up/down keys to move the cursor and the n key to select an item. The power key is the back button.
Installing ROMs
You can use the "install zip from SD/choose zip from internal memory" option to flash the CM ROM you downloaded earlier to your internal memory sdcard. Then you can flash the right version of gapps to match your ROM.
When you reboot (you need to leave the SD in the slot), the CM ROM should start. You will need to register with Google to set up Play Store.
If you later want to upgrade your ROM to another build, download it to your CM10SDCARD partition using CM. Then boot to CWM and flash it.
Backing Up
This version of CWM lets you back up and restore your setup. You can even back up to internal memory. It does not back up /boot, but does back up /system, /data and /cache.
Swapping EMMC and SDCARD
Some users have installed CM to a small SD card and want their apps to use the large internal media storage to store their data. I have developed a couple of zips to swap EMMC and SDCARD when booted to CM so that internal memory is available to your apps to store their files. One zip will add the swap and one will remove it. Get them attached below.
These zips can be flashed with CWM but will only install to the Original SD with CM. I just fixed a bug in the rev0 and rev1 zips. If you already flashed rev0 or rev1, you need to flash the remove zip before you flash the rev2 fixed version. No need to boot in between.
With rev2, both SDCARD and EMMC will show internal media storage, as will both MTP folders. A new folder, ext_sdcard, will show the external SD media partition.
Updating earlier versions of CWM
Updating prior installs of the Original SD installation to this new version of CWM is easy. Just download the ramdisk zip file attached below and extract the file. Put your old SD setup in your PC and rename the ramdisk.cwm to ramdisk.cwm.bak. Then copy the new ramdisk.cwm you just extracted to the card, replacing the version that was there. Next time you boot to CWM, the 6.0.2.8 version for HD+ Original SD will be there.
Change Log
Change Log
05/28/13 - guide is obsolete starting with the 5/27/13 ROM
05/15/13 - removed warning, resolved
04/10/13 - added warning running CM10.1.
03/09/13 - added rev2 of the swap zip, as it failed on CM10.1
03/08/13 - added rev1 of the swap zip to fix a permissions bug.
03/07/13 - retitled thread
03/03/13 - added CM10/10.1 SDswap zips
02/27/13 - Initial posting
OP Updated
Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
For hd plus only?
Sent from my BNTV400 using xda app-developers app
Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
mrDAXpax said:
For hd plus only?
Sent from my BNTV400 using xda app-developers app
Click to expand...
Click to collapse
Yes, you can use bokbokan's hybrid image to do it the same way for the HD. And I think his standard image does it too.
Sent from my Nook HD+ running CM10 on Hybrid SD
question...
Sorry if this has been answered somewhere else but, I did this using a 32gb card and everything I running smooth. I have a 64gb card that I want to switch it out for. I know it won't be a problem doing the root and all of that again, but I was wondering if anybody knows how to change the 32gb SD card back to normal? When I stick it in my computer all it shows is the boot partition and when I try to format it, it only formats that's partition. Meaning that my 32gb card turns into a worthless 116 mb card. I've tried on windows and Ubuntu and get the same results...
So does anybody have any suggestion?
Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
startoxic said:
Sorry if this has been answered somewhere else but, I did this using a 32gb card and everything I running smooth. I have a 64gb card that I want to switch it out for. I know it won't be a problem doing the root and all of that again, but I was wondering if anybody knows how to change the 32gb SD card back to normal? When I stick it in my computer all it shows is the boot partition and when I try to format it, it only formats that's partition. Meaning that my 32gb card turns into a worthless 116 mb card. I've tried on windows and Ubuntu and get the same results...
So does anybody have any suggestion?
Click to expand...
Click to collapse
Yes, use SDFormatter free from the web. It will do it.
Sent from my Nook HD+ running CM10 on Hybrid SD
Thank you, I will try that and let you know how it works
This is probably a stupid question, but once I've got the SD card set up properly, can I then go ahead and delete the ZIP files that I've installed? Or do I need to keep them kicking around? Figure if I can free up some space, I should.
Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
stormerider said:
This is probably a stupid question, but once I've got the SD card set up properly, can I then go ahead and delete the ZIP files that I've installed? Or do I need to keep them kicking around? Figure if I can free up some space, I should.
Click to expand...
Click to collapse
You can delete them if you want, but I usually always keep them somewhere so I don't have to redownload them if I need to reflash, which very oftern I have to for various reasons. I can always delete them later if space becomes an issue.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
You can delete them if you want, but I usually always keep them somewhere so I don't have to redownload them if I need to reflash, which very oftern I have to for various reasons. I can always delete them later if space becomes an issue.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
*nod* I meant deleting them off the SD card (should have specified). I'd be keeping them on my fileserver to ensure that I can reflash the sdcard to the same version I started with if I need to.
leapinlar said:
Setting up the SD
Begin by downloading the files you need either with stock or your PC. You will need my updated SD image file, attached below, the CM ROM zip you want to install and the gapps zip to match it. Put the last two zips on your internal media sdcard.
Click to expand...
Click to collapse
I'm confused by this, what are you referring to as "internal media sdcard"? I used win32 to burn the .img file, then booted into CWM...I'm clearly doing this wrong, because after that, the sdcard only has 117mb and no room to put ROMs on
Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
KamikazeChris said:
I'm confused by this, what are you referring to as "internal media sdcard"? I used win32 to burn the .img file, then booted into CWM...I'm clearly doing this wrong, because after that, the sdcard only has 117mb and no room to put ROMs on
Click to expand...
Click to collapse
You are doing it right. 117MB is what it is supposed to have. You do not put the files on that card. You put them on the HD+ (on the internal sdcard).
If you could see that it only had 117 MB, you were not booted to CWM, you were looking at the SD while it was still inserted in the PC. Booted to CWM means it is in the Nook.
When you insert the burned SD into the powered off HD+, then turn it on, it boots to CWM. That is what I mean by booting to CWM.
The internal sdcard means the storage that is built into the HD+ (that is why I call it internal). Boot to stock and download the files with it. They get put on the internal sdcard or "sdcard" as it is called. After you insert the burned card into the HD+ and boot to it, CWM has the ability to flash the zips by reading them from the internal sdcard built into the HD+.
Edit: I just clarified that in the OP. It is hard to anticipate how users will interpret your words in advance.
Sent from my Nook HD+ running CM10 on Hybrid SD
i dont seem to understand what file is supposed to amount to about 120mb. i extract "cm-10-20121231-UNOFFICIAL-ovation" and amounts to more than 200mb's but it also replaces other files.
Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
droidbot1337 said:
i dont seem to understand what file is supposed to amount to about 120mb. i extract "cm-10-20121231-UNOFFICIAL-ovation" and amounts to more than 200mb's but it also replaces other files.
Click to expand...
Click to collapse
You do not extract the cm zip. You extract the image zip which is attached to the post. It is the one that is 120 MB and is the one you burn to the SD with win32diskimager.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
You do not extract the cm zip. You extract the image zip which is attached to the post. It is the one that is 120 MB and is the one you burn to the SD with win32diskimager.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
thank you for the help. i appreciate it! i can now use my new HD+ (bought it last night) to its full potential.
I just wanted to say that I was suffering from the dreaded "Nook refuses to boot from the SD card" syndrome. I tried three different SD cards burned using four different computers, to no avail. Tried this patch? Worked perfectly. Thanks! :laugh:
SDXC cards viable for this use?
Well, that registration video was a real interesting bit compared to most forums I've ever used. Somebody put a lot of work into that.
I'm noticing a lot of emphasis on Class 4 cards. Impetuous sort that I am, I already obtained a Sandisk Ultra 64 GB microSDXC (Class 10/UHS 1) card for this project. Best Buy had a good deal and I was hoping to have a lot of room to work with and it wasn't clear what access to the internal storage would be available or best left alone. Has anyone had success or great problems with this card?
Other than that issue before attempting to execute the install, this is a very helpful thread. Much clearer than verygreen's original. That shouldn't be taken as an insult to verygreen as technical writing for those outside a project is not a skill everyone has or should have. Asking those deep within a project to shift mental gears to operate at the outsider's level can be a waste of resources and is often better delegated to a specialist. And we should be thankful for those specialists when they volunteer like this.
Epobirs said:
I'm noticing a lot of emphasis on Class 4 cards. Impetuous sort that I am, I already obtained a Sandisk Ultra 64 GB microSDXC (Class 10/UHS 1) card for this project. Best Buy had a good deal and I was hoping to have a lot of room to work with and it wasn't clear what access to the internal storage would be available or best left alone. Has anyone had success or great problems with this card?
Click to expand...
Click to collapse
Some have had good success with that card, especially if they use my Hybrid setup which uses less of the SD to operate from.
leapinlar said:
Some have had good success with that card, especially if they use my Hybrid setup which uses less of the SD to operate from.
Click to expand...
Click to collapse
It appears to be working on the first try. I'm currently syncing my app set from the Play store. It looks like this will be a huge value add for the Nook. I wouldn't have bought it if the full Android option weren't there. I just hope enough of us still buy books from B&N to keep them going.
Thanks.
Hi there
I am new to the tablet world and recently got a nook color. I decided I would like to make it more like a tablet and have been trying to root it but to no avail. I've tried everything, even the guides posted in the forums right here. Most recently I extracted the clockwork mod 3.2.1 to my 4g microsd plus moved a cyanogenmod zip to it as well. Every time I boot up my nook however, it goes straight into the normal OS welcome screen. My version is 1.4.3 and would like to find a guide that deals specifically with this version. I have been successful in the past getting into the microsd boot menu but the zip files that I install never show up. Thanks in advance for any pointers anyone can give me on this and I hope I am posting in the correct forum.
chanratt said:
Hi there
I am new to the tablet world and recently got a nook color. I decided I would like to make it more like a tablet and have been trying to root it but to no avail. I've tried everything, even the guides posted in the forums right here. Most recently I extracted the clockwork mod 3.2.1 to my 4g microsd plus moved a cyanogenmod zip to it as well. Every time I boot up my nook however, it goes straight into the normal OS welcome screen. My version is 1.4.3 and would like to find a guide that deals specifically with this version. I have been successful in the past getting into the microsd boot menu but the zip files that I install never show up. Thanks in advance for any pointers anyone can give me on this and I hope I am posting in the correct forum.
Click to expand...
Click to collapse
Looks like you are having two issues.
One is getting the CWM card to boot to CWM instead of stock. There can be several factors that determine whether the card will boot. Look at my Nook Color Tips thread linked in my signature and read item A9, bootable SDs. It talks about the issue. Rereading what you said, you say you "extracted to the SD", you mean you burned the .img file to the SD with burning software? Followed by copying the zips to the card?
The second issue is why your zip files don't show up. I am not sure what is causing that. When it boots to stock, can you see the files with the stock file manager? In the CWM menu when you do get it to boot to CWM, are you choosing the option that says "install zip from SD, followed by "choose zip from SD "?
Sent from my Nook HD+ running CM10 on Hybrid SD
While I'm not the OP, I am having the same problem. NookColor 1.4.3
I burned the SD agnostic image to a SD card. Then copied a CM7.zip build to the card. Placed that into the nook, powered on. It just boots stock.
The card shows up in stock OS, has the 5 files(MLO, u-boot.bin, uImage, uRamdisk, cm-7.2.0-encore.zip) that it had when in the PC and 3 added directories from the nook upon boot(B&N Downloads, LOST.DIR, My Files)
Have tried lots of other files on the SD card. It always boots stock. Tried different SD cards(SanDisk 8GB Class 4, Generic 1GB)
Have EVO rooting skills so I understand what I'm doing. This is my first Nook.
This thing is crap with locked app store. Need to root to either install my apps on stock or run full blown android. Dual boot would be ok too, but I don't care about warranty. I just want something to work.
Are you sure you have a Nook Color? You could have a Nook Tablet, they look just like a Color but have a silver bezel instead of black. The model number on the Tablet is BNTV-250. These cards will not boot on a Tablet.
Sent from my Nook HD+ running CM10 on Hybrid SD