Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help
Stjpa said:
Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help
Click to expand...
Click to collapse
Are you unzipping the right file? You said something about with stock recovery and without. Those are not image files that can be burned. When you unzip my image zip file, you should end up with a 300MB .img file. That is what you burn with win32diskimager. And take the card out of the PC and put it back in before you try to look at it. And be sure to use an external card reader, not one built into your PC.
Sent from my Nook HD+ using Tapatalk
Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.
Stjpa said:
Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.
Click to expand...
Click to collapse
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
Yes I did unzip the image file before I burned it. I ended up finding a cwr zip that was for a 4 gig card, probably an older way of doing it, and that worked for some reason. I did use your stock 1.4.3 zip though and all seems well. Your tips page is great, thank you, you're very helpful now I can play around and brick it again with some other stuff.
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
No nothing was done by B&N. It is how you are burning the card. It will not boot in the nook unless burned perfectly. Look at my tips thread linked in my signature and read items A9 and A10.
There not any easy was not to use a bootable recovery card. Just keep trying, using different software, different cards, different PC s, different card readers.
Sent from my Nook HD+ using Tapatalk
ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
Use win32diskimager instead and use an external card writer. The image is approximately 300mb with the Rev5 file. Then copy the CM10 and 2021011 GApps zips to SD card. Insert in Nook Color. Wait for setup to finish and shut down. Start Nook. Enjoy.
Related
I tried to create a CM7 bootable SD card per the thread entitled "Size-agnostic SD Card image and CM7 installer for SD Cards. with updater."
I used WinImage to create the supposedly bootable SD card with the installer, placed it into my Nook which was fully off, and the Nook booted as usual instead of from the SD card.
Am I missing something? How do you boot from an SD card?
Is there such a thing as a boot choice menu like on my PC or is the default always to boot from the SD card?
Does the Nook have to be rooted for this to work?
Thanks
ETA: My PC shows the uSD card as nearly full, but my Nook shows the SD card as nearly empty (1.74 out of 1.84 GB available).
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
angomy said:
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
Click to expand...
Click to collapse
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
JowBe said:
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
Click to expand...
Click to collapse
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
angomy said:
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
Click to expand...
Click to collapse
Yes, I ran WinImage as administrator. And yes, it shows up in Windows explorer as boot and yes those files are there.
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
JowBe said:
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
Click to expand...
Click to collapse
I'm not sure, because I ran through initial registration on stock prior to running CM7 off SD --- I used the same image (verygreen's agnostic at http://forum.xda-developers.com/showthread.php?t=1000957) as you did without a hitch.
If you decide to run CM7 off internal sometime you're going to need to register the nook anyway.
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
An update: I decided to try to create a bootable SD from another bootable image (MonsterRootPack with CWR). This time the nook wouldn't even turn on. I'm going to try to create a third bootable SD as angomy has suggested to see what happens.
I need to add that when I removed the uSD card, it booted normally.
Also, when I create the bootable SD with winimage, I get a dialog box that tells me that the format of the SD card is not right and asks me if I want to resize the image. But this happened on both the images. I don't know if this has anything to do with it.
angomy said:
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
Click to expand...
Click to collapse
Ok, I tried the CWR image in the link you gave. Same problem - no-go. Just sits there dead. I remove the uSD and it boots normally.
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
ebubar said:
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
Click to expand...
Click to collapse
Thanks for the link. I have given this some thought, and it doesn't seem reasonable that booting from an SD card should depend upon the state of registration of the device because the whole idea of booting from an SD card means that the content of the SD card is loaded in the place of the stock software.
robot8 said:
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
Click to expand...
Click to collapse
Thanks. Yes, I just replied to another poster that I didn't think that the state of registration of the device should matter since the whole purpose of a bootable SD card is to load the contents of the SD in place of the stock.
I have followed the instructions in verygreen's thread to the letter - several times. Also, I have tried to make other bootable SDs without success. But that's a good idea about trying Win32diskimager. Also, I will try a Sandisk class 4 card SD as soon as I can get to a store.
I do have a question. When I format the SD card what "allocation unit size" should I be using? (formatting through Windows) The default is 32 kb.
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Congrats!
Re: allocation unit size, do you mean cluster size? Depends on how big the FAT32 partition is --- larger clusters used means more actual space used but too large a size can reduce access speed. Generally Windows defaults to suggested 4k for up to 8GB, 8GB-16GB = 8k, 16-32GB = 16k, and 32+ = 32kb.
Also the first boot is the longest --- shouldn't take as long after that. Welcome to CM7 - I don't regret installing it over stock after waffling for weeks on whether or not I'd use stock at some point -- CM7 is just too much faster with too many more options and tweaks for my impatience to deal with stock Froyo.
THANK YOU OP!
I had the same issue, tried 20x various ways, 2 different computers, 2 different SD readers, and it was WinImage that wasnt working correctly. Win32DiskImager solved it.
Thanks.
JowBe said:
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Click to expand...
Click to collapse
Thanks so much! This finally got it to work for me too. Loving my new Android tablet
FWIW, WinImage does not work. Maybe it used to work, but it does not now. I posted about this a few days ago here.
Hello, Just got a refurbished NC with version 1.2 (read forever). Works great from stock system, but I'm trying to install CM7 on SanDisk 8gb card via post directions on:
[ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards
I've tried the 2 latest stable updates 7.1.0 and 7.0.3 and everything seems to install fine with the last lines saying "all steps complete...flushing caches...shutting down"
When I restart, it goes to the last 20 or so lines of the install and shuts down again (same messages at the end...all steps etc) I've redownloaded both the green 1.3 installer image and the stable roms. When I tried a "nightly" the install stopped on a line saying "looking for file starting with update..." or something like that and it sat there until I held the power button for a looong time.
I did try searching for a solution but couldn't find one like this problem. Any ideas what I'm doing wrong or not doing? Thanks
One thought...the 8gb card doesn't show what class... it only says Sandisk Micro HC
Are you certain you are dropping the CM7 files on the root of the boot partition on the SD?
You seem to describe doing it right but we need step-by-step how you get it done in order to maybe figure out where the culprit is.
I would suggest RECREATE the bootable uSD first.
Note: redownload the image file if needed.
Thanks for replying. Here's what I've done:
formatted 8gb micro via windows 7
downloaded image installer 1.3 via xda
downloaded winimage
restored sd card from image (generic...)
I saw boot disk w/4 files
downloaded latest stable cm7 and copied directly (zipped)to boot partition on sd
inserted sd in NC
it loaded and started updating for about 60 secs like mentioned above
it automatically shut down
When I restart NC, there is a quick white screen it goes to loading and redoes the last 20-30 lines of update and shuts down again. The lines go by so quick I can't read it (or more accurately remember them)
I've redownloaded both install image and stable updates with same results. When I tried downloading a niightly, the installer stopped midway with last line saying something like...looking for file starting with update...
Any help is appreciated
I have the same device as you (refurb NC 1.2 from the recent dailysteals sale) and did the exact things that you did except use win32diskimager instead of winimage, and it installed the cm7 nightly 240 without any issues. It's only afterward that I ran into trouble, trying to install gapps (read about it here: http://forum.xda-developers.com/showthread.php?t=1332441)
same device, same procedure, different results.
You might want to re-download cm7 zip file... you can use 7-zip or winrar to "Test archive" to see if it is corrupt before copying it to the boot partition of the uSD.
Like jh mentioned, I would give win32diskimager a try, there were many reported of winimage didn't work well.
Search for the win32diskimager, older version is better for some reason, 0.15 or something. If you can't find, let me know, I'll host the file.
Again, redownload all files, make sure no hiccup in the middle of downloading process.
What you did was correct, just to let you know.
Work-around works---next question
update!
I took out the micro 2gb sandisk from my phone and tried it again doing the normal install. It works! So, next question. Can I make an image of the 2gb sd and restore it on the 8gb sd and via some procedure maximize the rest of the sd?
Any ideas why 8gb didn't work in first place? I had done a full format via windows explorer before trying the first time. Even tried formatting via NC and still no luck. The 8gb was being used in my rooted Eris phone with no problems.
By any chance you got the counterfeit one? the 8GB
not counterfeit...I think...because when fully formatted it was 7.4+ gb
Found another 8gb sandisk micro and used it. Worked perfectly. I should have tried that first and saved a whole lot of time and energy! Thanks to all that chimed in with suggestions.
hmthomas said:
Found another 8gb sandisk micro and used it. Worked perfectly. I should have tried that first and saved a whole lot of time and energy! Thanks to all that chimed in with suggestions.
Click to expand...
Click to collapse
You have to use at least a class 4 card and that still works pretty pokey. I have my nook overclocked and running on internal and it is almost as fast as a stock Atrix
Sent from my NookColor using xda premium
I just got a refurbished Nook Color. Seems to work fine but you have to push the power button hard to click it.
Haven't rooted, installed roms, anything yet. But I can't get it to boot from my SD card. I have a 4GB (class-4) microSD card. (I have checked the sdcard for bad blocks using the linux "badblocks" command.) I have followed instructions detailed here:
glasskeys. /2011/06/27/how-to-make-a-bootable-sd-card-running-cyanogenmod-for-the-nook-color/
and here [note - new users are forbidden from posting links here - in the above and below links, I left out the "com" after the dot in the website address]:
nookdevs. /Nookie_Honeycomb:_Burning_a_bootable_SD_card
. I use Ubuntu Linux 10.11 "dd" command to write the .img files to the SD card. However, once I write the SD card and put it into my Nook, the nook won't turn on. Just won't turn on. As soon as I take the card out and try again, I can boot up the nook to the locked-down, walled-garden stock Android on the device.
Help! Is something wrong with my SD card, or with my device? I have a 2GB microSD card somewhere I can find if I need to...
Re:
Can anyone help me find the source of the problem? Is it my SDcard, my card-burning technique (i followed the dd instructions word for word), my computer or is something wrong with my Nook?
What I might suggest is to discard your original source of instructions and start fresh. Search the xda forum for clear information on 1) proper mSD card to use; 2) proper card burning software; 3) the most appropriate rom(s) to use for what you want your Nook to do for you, and 4) if necessary, very explicit instructions to troubleshoot any problems you may encounter with your processes. I'll not point to specific locations here, because I'm not sure what you actually want to do, But the search engine is very thorough and the threads are numerous.
Good luck. I'm sure you'll be quite content with your newly rooted/rommed NC.
yanom said:
Can anyone help me find the source of the problem? Is it my SDcard, my card-burning technique (i followed the dd instructions word for word), my computer or is something wrong with my Nook?
Click to expand...
Click to collapse
I have a section in my tips thread linked in my signature that deals with bootable SDs, but I'm not sure it's going to help you. I was helping another user that had the same exact problem where the Nook would not power on with the SD in. One of the things I had him do was fully charge his Nook. I can't remember how he resolved it though, if he did. But I suspect a faulty Nook or SD. Pins bent or something.
Sent from my Nook Color running ICS and Tapatalk
leapinlar said:
I have a section in my tips thread linked in my signature that deals with bootable SDs, but I'm not sure it's going to help you. I was helping another user that had the same exact problem where the Nook would not power on with the SD in. One of the things I had him do was fully charge his Nook. I can't remember how he resolved it though, if he did. But I suspect a faulty Nook or SD. Pins bent or something.
Sent from my Nook Color running ICS and Tapatalk
Click to expand...
Click to collapse
Thanks. It's worth noting that, if I get an SD with normal data (photos, etc) on it and put it in while the nook is booted normall, the nook can read the card and see what's on there. So the nook can read cards. That doesn't mean the boot-up bits aren't screwy.... this is refurbished.
Update
Update: I got it to work. However, it's quite laggy, possibly because it's Honeycomb on a class 2 (low IO speed) card. Can anyone point me to a super-slimed android (don't care what version) .img file I can put on my card?
yanom said:
Update: I got it to work. However, it's quite laggy, possibly because it's Honeycomb on a class 2 (low IO speed) card. Can anyone point me to a super-slimed android (don't care what version) .img file I can put on my card?
Click to expand...
Click to collapse
Oh, do not use Honeycomb. It is terrible. Use CM 7.2. They just this weekend came out with a stable version. Cyanogenmod.com. Look for encore stable. And your class 2 should work great.
Sent from my NookColor using Tapatalk
leapinlar said:
Oh, do not use Honeycomb. It is terrible. Use CM 7.2. They just this weekend came out with a stable version. Cyanogenmod.com. Look for encore stable. And your class 2 should work great.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Let me +1 the latest and greatest CM 7.2. I was using a supposedly faster card with 7.1 on an NC and I also experienced a lot of lagging.
Switching to a class 4 SanDisk card and going to 7.2 fixed the problem. Since I did both at the same time, I can't tell you what exactly made the difference but if installing 7.2 does not fix the issue, try changing your card.
I followed these instructions which installs CM7 on your SD card so you can dual boot if necessary. Also, this has the same exact info written in a slightly less techie language. (I am not sure why he is trying to use the hardware keys to reboot into the recovery mode when it can be done easily from within CM7.)
Good luck!
I know this is a super old thread, but it seems like an appropriate place to post. I've got three Nook Color tablets from my niece and nephews. I flashed them with Mirage Cyanogenmod 7.2 via CWM on an SD card. Once I got the SD setup, I went through two of them in 10 minutes total. No sweat. I installed two fresh, out-of-the-box SD cards in each tablet, which left the modded, CWM SD card untouched after flashing the first two. The third one was missing for several weeks. They just found that one. They dropped off the third tablet along with the modded SD card, which was sealed in a ziplock bag, to me. I installed the card into the third Nook Color, which was untouched after flashing the first two, and the third Nook Color booted right past the SD card and into the stock OS. I've reflashed the same .img file and others, including verygreen's onto this SD card. It simply refuses to boot from the SD. I've tried writing the .img file from WinImage, and WinImage32 through the SD slot on my laptop, an SD card adapter via USB, and through the nook itself as a mass storage drive. I'm stumped. Any thoughts?
On a side note, I don't have access to the first two to confirm the SD card is still on track, nor do I, at this point, have a spare SD card to troubleshoot with. Those are my next steps to take, but I am curious what the experts might have to suggest in the mean time. Thanks in advance, and I'll post my solution, if I solve this.
Are you sure the third one is a Nook Color? It could be a Nook Tablet. They look the same, but the Tablet has a silver bezel instead of black. Those cards will not boot on a Tablet.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Are you sure the third one is a Nook Color? It could be a Nook Tablet. They look the same, but the Tablet has a silver bezel instead of black. Those cards will not boot on a Tablet.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
My first thought was "that's a ridiculous question. Of course it's a Color!", but then I peeled the cover off, and the bezel is indeed silver. Looks like I have some more reading to do. Thanks for saving me a TON of grief and frustration.
Just to follow up, I followed the instructions for flashing Cyanogenmon on the Nook TABLET, thank you Leapinlar, and everything is good. Thanks again.
I had put CM7 on my Nook Color close to two years ago. I am looking to format a new mSD card to get a triple boot on my Nook. Although I have only used the CM7 since my previous conversion.
I am currently having trouble getting the CM7 CM9 image burned onto the mSD disk. I have been trying the Winimage software and downloaded the Win32diskimager (which appears an Ubuntu program). I am not able to get the disk burned to be read by the NC. Any sites with step by step instructions of burning this disk image? I am running W7-64 on my laptop.
Photobug said:
I had put CM7 on my Nook Color close to two years ago. I am looking to format a new mSD card to get a triple boot on my Nook. Although I have only used the CM7 since my previous conversion.
I am currently having trouble getting the CM7 CM9 image burned onto the mSD disk. I have been trying the Winimage software and downloaded the Win32diskimager (which appears an Ubuntu program). I am not able to get the disk burned to be read by the NC. Any sites with step by step instructions of burning this disk image? I am running W7-64 on my laptop.
Click to expand...
Click to collapse
If you look at my tips thread linked in my signature and look at item A9, I talk about burning bootable SD cards in general. Those tips should apply to the dual boot SD also.
Sent from my NookColor using Tapatalk
Thanks for the info
Thanks Leapinlar,
That did the trick. I was having trouble with the Discimage software not recognizing the SD image with the default search. I changed the search to "all items" and was able to burn the disk image. After trying many different options i finally got one of the CM9s you have listed to take hold on my Nook.
Now i just have to figure out all the bugs and differences on the new OS.
Hi there
I am new to the tablet world and recently got a nook color. I decided I would like to make it more like a tablet and have been trying to root it but to no avail. I've tried everything, even the guides posted in the forums right here. Most recently I extracted the clockwork mod 3.2.1 to my 4g microsd plus moved a cyanogenmod zip to it as well. Every time I boot up my nook however, it goes straight into the normal OS welcome screen. My version is 1.4.3 and would like to find a guide that deals specifically with this version. I have been successful in the past getting into the microsd boot menu but the zip files that I install never show up. Thanks in advance for any pointers anyone can give me on this and I hope I am posting in the correct forum.
chanratt said:
Hi there
I am new to the tablet world and recently got a nook color. I decided I would like to make it more like a tablet and have been trying to root it but to no avail. I've tried everything, even the guides posted in the forums right here. Most recently I extracted the clockwork mod 3.2.1 to my 4g microsd plus moved a cyanogenmod zip to it as well. Every time I boot up my nook however, it goes straight into the normal OS welcome screen. My version is 1.4.3 and would like to find a guide that deals specifically with this version. I have been successful in the past getting into the microsd boot menu but the zip files that I install never show up. Thanks in advance for any pointers anyone can give me on this and I hope I am posting in the correct forum.
Click to expand...
Click to collapse
Looks like you are having two issues.
One is getting the CWM card to boot to CWM instead of stock. There can be several factors that determine whether the card will boot. Look at my Nook Color Tips thread linked in my signature and read item A9, bootable SDs. It talks about the issue. Rereading what you said, you say you "extracted to the SD", you mean you burned the .img file to the SD with burning software? Followed by copying the zips to the card?
The second issue is why your zip files don't show up. I am not sure what is causing that. When it boots to stock, can you see the files with the stock file manager? In the CWM menu when you do get it to boot to CWM, are you choosing the option that says "install zip from SD, followed by "choose zip from SD "?
Sent from my Nook HD+ running CM10 on Hybrid SD
While I'm not the OP, I am having the same problem. NookColor 1.4.3
I burned the SD agnostic image to a SD card. Then copied a CM7.zip build to the card. Placed that into the nook, powered on. It just boots stock.
The card shows up in stock OS, has the 5 files(MLO, u-boot.bin, uImage, uRamdisk, cm-7.2.0-encore.zip) that it had when in the PC and 3 added directories from the nook upon boot(B&N Downloads, LOST.DIR, My Files)
Have tried lots of other files on the SD card. It always boots stock. Tried different SD cards(SanDisk 8GB Class 4, Generic 1GB)
Have EVO rooting skills so I understand what I'm doing. This is my first Nook.
This thing is crap with locked app store. Need to root to either install my apps on stock or run full blown android. Dual boot would be ok too, but I don't care about warranty. I just want something to work.
Are you sure you have a Nook Color? You could have a Nook Tablet, they look just like a Color but have a silver bezel instead of black. The model number on the Tablet is BNTV-250. These cards will not boot on a Tablet.
Sent from my Nook HD+ running CM10 on Hybrid SD