Hello, Just got a refurbished NC with version 1.2 (read forever). Works great from stock system, but I'm trying to install CM7 on SanDisk 8gb card via post directions on:
[ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards
I've tried the 2 latest stable updates 7.1.0 and 7.0.3 and everything seems to install fine with the last lines saying "all steps complete...flushing caches...shutting down"
When I restart, it goes to the last 20 or so lines of the install and shuts down again (same messages at the end...all steps etc) I've redownloaded both the green 1.3 installer image and the stable roms. When I tried a "nightly" the install stopped on a line saying "looking for file starting with update..." or something like that and it sat there until I held the power button for a looong time.
I did try searching for a solution but couldn't find one like this problem. Any ideas what I'm doing wrong or not doing? Thanks
One thought...the 8gb card doesn't show what class... it only says Sandisk Micro HC
Are you certain you are dropping the CM7 files on the root of the boot partition on the SD?
You seem to describe doing it right but we need step-by-step how you get it done in order to maybe figure out where the culprit is.
I would suggest RECREATE the bootable uSD first.
Note: redownload the image file if needed.
Thanks for replying. Here's what I've done:
formatted 8gb micro via windows 7
downloaded image installer 1.3 via xda
downloaded winimage
restored sd card from image (generic...)
I saw boot disk w/4 files
downloaded latest stable cm7 and copied directly (zipped)to boot partition on sd
inserted sd in NC
it loaded and started updating for about 60 secs like mentioned above
it automatically shut down
When I restart NC, there is a quick white screen it goes to loading and redoes the last 20-30 lines of update and shuts down again. The lines go by so quick I can't read it (or more accurately remember them)
I've redownloaded both install image and stable updates with same results. When I tried downloading a niightly, the installer stopped midway with last line saying something like...looking for file starting with update...
Any help is appreciated
I have the same device as you (refurb NC 1.2 from the recent dailysteals sale) and did the exact things that you did except use win32diskimager instead of winimage, and it installed the cm7 nightly 240 without any issues. It's only afterward that I ran into trouble, trying to install gapps (read about it here: http://forum.xda-developers.com/showthread.php?t=1332441)
same device, same procedure, different results.
You might want to re-download cm7 zip file... you can use 7-zip or winrar to "Test archive" to see if it is corrupt before copying it to the boot partition of the uSD.
Like jh mentioned, I would give win32diskimager a try, there were many reported of winimage didn't work well.
Search for the win32diskimager, older version is better for some reason, 0.15 or something. If you can't find, let me know, I'll host the file.
Again, redownload all files, make sure no hiccup in the middle of downloading process.
What you did was correct, just to let you know.
Work-around works---next question
update!
I took out the micro 2gb sandisk from my phone and tried it again doing the normal install. It works! So, next question. Can I make an image of the 2gb sd and restore it on the 8gb sd and via some procedure maximize the rest of the sd?
Any ideas why 8gb didn't work in first place? I had done a full format via windows explorer before trying the first time. Even tried formatting via NC and still no luck. The 8gb was being used in my rooted Eris phone with no problems.
By any chance you got the counterfeit one? the 8GB
not counterfeit...I think...because when fully formatted it was 7.4+ gb
Found another 8gb sandisk micro and used it. Worked perfectly. I should have tried that first and saved a whole lot of time and energy! Thanks to all that chimed in with suggestions.
hmthomas said:
Found another 8gb sandisk micro and used it. Worked perfectly. I should have tried that first and saved a whole lot of time and energy! Thanks to all that chimed in with suggestions.
Click to expand...
Click to collapse
You have to use at least a class 4 card and that still works pretty pokey. I have my nook overclocked and running on internal and it is almost as fast as a stock Atrix
Sent from my NookColor using xda premium
Related
I wanted to try to run CM7 off SD card, while not changing anything with my regular boot, which is rooted stock 1.1.0.
I have followed verygreen's thread on using the size agnostic installer, and 2 different SD cards. The behavior is different on each.
on the 8 g class 6, it just boots directly to emmc, not even going to the sd card.
on the 4 g class 2, it won't boot with the sd card in. I can hold the power button till i'm blue in the face, and it won't boot.
Anybody know what I'm doing wrong?
I suspect you never got the image written properly to the card in the first place.
Someone from mobileread.com made a decent tutorial with vids, which will come up if you google "anamardoll nook cm7" (new users cannot post outside links :S ) I skipped down to "what you will need" and also skipped the first vid.
Her steps are based on verygreen and quinxy (who based his steps on vergreen).
Helped in 2 minutes. Rather than "restore virtual hard disk image" i just used the regular write image. I ended up with the same files on the sd card, but I suspect the two methods are subtly different. Thanks for pointing me to the vids.
On another note, maybe you can help me with a question. The data "apps downloaded, etc, all gets written to the SD card, right, not the internal memory? So I can have two separate enviroments, (mine on the sd card running CM7) and my wifes running rooted Nookie? With all of our data stored separately, mine on the sd, hers on the internal memory. Sound right?
Thanks!
Now I can't install Gapps! Stuck again.
Ok, not sure why I'm having so much trouble. I got the CM7 to boot, runs fine, now I'm trying to install Gapps. I downloaded the latest Gapps for Cm7, installed the zip to the SD card, booted to recovery.
It goes through all the text, then at the end looks for the gapps installer, says "installer not found" and deletes the file.
any suggestions?
Tdogg0406 said:
On another note, maybe you can help me with a question. The data "apps downloaded, etc, all gets written to the SD card, right, not the internal memory? So I can have two separate enviroments, (mine on the sd card running CM7) and my wifes running rooted Nookie? With all of our data stored separately, mine on the sd, hers on the internal memory. Sound right?
Thanks!
Click to expand...
Click to collapse
Yep, two completely separate "environments" as you call it, pull out your SD card and she has a regular Nook. All your pr0n is safe
Tdogg0406 said:
Ok, not sure why I'm having so much trouble. I got the CM7 to boot, runs fine, now I'm trying to install Gapps. I downloaded the latest Gapps for Cm7, installed the zip to the SD card, booted to recovery.
It goes through all the text, then at the end looks for the gapps installer, says "installer not found" and deletes the file.
any suggestions?
Click to expand...
Click to collapse
OK, as you have already CM7 installed fine, make sure you set up your wi-fi before installing gapps.
Now make sure you got the right gapps for the CM7/Nook from here:
http://android.d3xt3r01.tk/cyanogen/gapps/gapps-gb-20110307-signed.zip
Make sure you verify hash so that you don't have a corrupted download:
29efd1cc5457849b10d4f0dc31f7f04c
When you say "booted to recovery", how did you do it? For verygreen's installer, you need to do the two fingered salute by holding N button and power button together for approx 6 seconds.
Yes, Safe indeed!
I realized my "stupid" mistake! Evergreen's guide sends a link to the "Gapps" zip to install. When I clicked on the link, I blindly saved it, and kept trying to install it. After starting over from scratch, I realized Evergreen's link to Gapps is just another link to CM7 (hence the reason I was getting the "Gapps installer not found" message....foread slap now!)
I googled it about a half hour and got evrything working just fine!
Thanks for the link! and the help!
I tried to create a CM7 bootable SD card per the thread entitled "Size-agnostic SD Card image and CM7 installer for SD Cards. with updater."
I used WinImage to create the supposedly bootable SD card with the installer, placed it into my Nook which was fully off, and the Nook booted as usual instead of from the SD card.
Am I missing something? How do you boot from an SD card?
Is there such a thing as a boot choice menu like on my PC or is the default always to boot from the SD card?
Does the Nook have to be rooted for this to work?
Thanks
ETA: My PC shows the uSD card as nearly full, but my Nook shows the SD card as nearly empty (1.74 out of 1.84 GB available).
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
angomy said:
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
Click to expand...
Click to collapse
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
JowBe said:
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
Click to expand...
Click to collapse
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
angomy said:
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
Click to expand...
Click to collapse
Yes, I ran WinImage as administrator. And yes, it shows up in Windows explorer as boot and yes those files are there.
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
JowBe said:
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
Click to expand...
Click to collapse
I'm not sure, because I ran through initial registration on stock prior to running CM7 off SD --- I used the same image (verygreen's agnostic at http://forum.xda-developers.com/showthread.php?t=1000957) as you did without a hitch.
If you decide to run CM7 off internal sometime you're going to need to register the nook anyway.
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
An update: I decided to try to create a bootable SD from another bootable image (MonsterRootPack with CWR). This time the nook wouldn't even turn on. I'm going to try to create a third bootable SD as angomy has suggested to see what happens.
I need to add that when I removed the uSD card, it booted normally.
Also, when I create the bootable SD with winimage, I get a dialog box that tells me that the format of the SD card is not right and asks me if I want to resize the image. But this happened on both the images. I don't know if this has anything to do with it.
angomy said:
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
Click to expand...
Click to collapse
Ok, I tried the CWR image in the link you gave. Same problem - no-go. Just sits there dead. I remove the uSD and it boots normally.
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
ebubar said:
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
Click to expand...
Click to collapse
Thanks for the link. I have given this some thought, and it doesn't seem reasonable that booting from an SD card should depend upon the state of registration of the device because the whole idea of booting from an SD card means that the content of the SD card is loaded in the place of the stock software.
robot8 said:
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
Click to expand...
Click to collapse
Thanks. Yes, I just replied to another poster that I didn't think that the state of registration of the device should matter since the whole purpose of a bootable SD card is to load the contents of the SD in place of the stock.
I have followed the instructions in verygreen's thread to the letter - several times. Also, I have tried to make other bootable SDs without success. But that's a good idea about trying Win32diskimager. Also, I will try a Sandisk class 4 card SD as soon as I can get to a store.
I do have a question. When I format the SD card what "allocation unit size" should I be using? (formatting through Windows) The default is 32 kb.
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Congrats!
Re: allocation unit size, do you mean cluster size? Depends on how big the FAT32 partition is --- larger clusters used means more actual space used but too large a size can reduce access speed. Generally Windows defaults to suggested 4k for up to 8GB, 8GB-16GB = 8k, 16-32GB = 16k, and 32+ = 32kb.
Also the first boot is the longest --- shouldn't take as long after that. Welcome to CM7 - I don't regret installing it over stock after waffling for weeks on whether or not I'd use stock at some point -- CM7 is just too much faster with too many more options and tweaks for my impatience to deal with stock Froyo.
THANK YOU OP!
I had the same issue, tried 20x various ways, 2 different computers, 2 different SD readers, and it was WinImage that wasnt working correctly. Win32DiskImager solved it.
Thanks.
JowBe said:
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Click to expand...
Click to collapse
Thanks so much! This finally got it to work for me too. Loving my new Android tablet
FWIW, WinImage does not work. Maybe it used to work, but it does not now. I posted about this a few days ago here.
I have searched diligently and have yet to find specific instruction for creating a bootable SD card for my NC with MIUI Nook Color 1.9.16 (or any version of MIUI for that matter).
I am currently running a fully rooted version of 1.3 on the emmc and "all is well" and I need it left that way so as to continue having access to "in store reading" which I use quite a bit.
Have previously had CM7 and Phiremod running both internally and on an SD card at various times and tried to do a previous version of MIUI on the card using the same process without any luck.
Thanks in advance.
You can use verygreens method here -
http://forum.xda-developers.com/showthread.php?t=1000957
Important part is to rename the miui zip like this -
'How to update to a new build:
put the new build you want to try on the first partition. (the name must be update-cm-*.zip or cm_encore_full*.zip or just update-*.zip)'
..and it should work fine
cheers,
Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Where are/is "My Apps" as I do not seem to be able to find it.
D/L Netflix and it runs just as it should but the soundlevel at max is quite a bit lower than on rooted 1.3.
Free Koi living wallpaper looks beautiful.
My Apps - strangely there isn't one, but this works nicely -
http://forum.xda-developers.com/showthread.php?t=1154299
Sound level - Download nook tweaks from market and change settings in that
Cheers,
What did you rename the MIUI file? I've tried it a couple different ways and checked the MD5's, but keep getting errors. Unless my SD card has been corrupted somehow (I used it for other SD boots before this, so not too likely), I can't think of anything else causing the problem.
Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?
PhoenixClaw said:
Hi. I tried putting the MIUI zip in the root of the sd card and booted into recovery as stated. It was renamed as one of the cm7 updates and installation went as per normal. However, when I did boot up the nook was stuck looping the MIUI animation and did not finish. What did I do wrong?
Click to expand...
Click to collapse
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.
DizzyDen said:
Maybe just didn't wait long enough... the first boot takes a long time since the update script clears cache and dalvik cache.
Of course... this is just a wild guess since you didn't provide a whole lot of information... more information may yeild different feedback.
Click to expand...
Click to collapse
What kind of information? My nook color originally had the latest CM7 nightly on the sd card. I followed verygreen's method when I installed that. I used the NC normally. Then, I followed this thread and applied verygreen's method. I downloaded the MIUI rom from the miui thread, renamed it like the cm7 nightly zip ("cm_encore_full-253.zip") and put it in the root of the sd card. I put the sd card back in and booted via recovery. It installed and shut down. I turned it on again, and reached the MIUI globe thing. It was looping and stuck there for 30 minutes.
I've been thinking of trying miui.
If anybody has got.it running from SD please give the step-by-step procedure for the rest of us.
Thanks
A search would show you....
http://forum.xda-developers.com/showthread.php?t=1271982&highlight=Miui+sd
I hate to revive a dead thread, but I have been trying everything I could read or download.
I am using the Size-agnostic installer from this thread: http://forum.xda-developers.com/showthread.php?t=1000957
I am trying to flash MIUI 1.9.16 (MIUI.us_encore_1.9.16_Eng_Deo_ZipA_Signed_andmer) (http://goo-inside.me/miui/encore/)
I successfully installed CM7 to this Sandisk Class4 16gig microSD. Every time I try to flash MIUI, I re-burn the size agnostic card image, copy over the cm7-renamed MIUI ROM, and boot.
The installer seems to work, just like my CM7 installs. Then, when I try to reboot, it goes back to the installer (linux penguin at the top, goes through the motions of trying to flash another rom, when not finding anything, it shuts down).
I know I am missing something simple.
Am I to install CM7, then MIUI on top of it (without reburning the card)? Am I just using an SD-incompatible ROM? For those who were successful, where did you download the ROM from?
I know I have lots of questions, I hope you guys see my effort (that I don't just want someone to give me a quick fix), and I thank you in advance for your help.
Kind regards!
harryzee said:
Many thanks as that did the trick!
Loaded and running from SD card.
It installed/is using the new Market interface (3.1.3?).
Click to expand...
Click to collapse
I'm certainly no expert, but I have flashed two different versions of MiUi to micro SD cards adn then worked fine. You do not need to do i over CM7. Like you, I prepared a clean SD and used the size agnostic procedure. I renamed the MiUi file to some that started with update-cm-
I got my MiUi file here:
http://roms.miui.us/
I used a program called SD Formatter to format the card.. then I used the 1.3 version installer. I sometimes had problems using winimage to create this sd card . You have to select the drive letter for the sd card and then use the "restore" choice on the menu.
David, thanks for your response. I had already wiped it and installed CM7, but when I saw your post, I gave MIUI one last try. I downloaded from that site, and BAM, it installed perfectly! Thanks heaps!
Trying to prepare 32gb card for nook cm7
Using verigreen's size agnostic img
Wrote it to the card using win image writer
dropped cm7 and gapps
on boot it recognizes card, makes partitions, inflats stuff everything looks ok
on reboot it does NOT boot from sd
instead goes to nook default
exact same stuff on 8gb card works fine
what gives?
I have two nooks at this point
both may have cwm recovery - i dont know how to check
(I know how to use nook, update it etc, but not sure about this cwr thingy)
one has cm7.1 on emmc
other has nook 1.2 rom on emmc
in both of them if i insert 8/16/32gb card
1) if sd card has fresh verygreen image with update...zip and gapps..zip installer kicks in and preps sd card
2) once i reboot, it ---- does NOT ---- boot from sd card anymore
All I want is bootable sd card with cm7.1 on it so that I can give it to a friend of mine
what am I doing wrong
is there a way to force nook to boot from sd card?
I think if it finds cwr on emmc and cwr on sd, it boots from emmc or something
I use win32diskimager which I think gives more reliable results.
Also you must mount the card in a PC for writing the image using a real USB / SD adapter. Using a card media slot on the PC or using another device like a phone to mount the card are known to give problems.
mrkkk said:
I have two nooks at this point
both may have cwm recovery - i dont know how to check
(I know how to use nook, update it etc, but not sure about this cwr thingy)
one has cm7.1 on emmc
other has nook 1.2 rom on emmc
in both of them if i insert 8/16/32gb card
1) if sd card has fresh verygreen image with update...zip and gapps..zip installer kicks in and preps sd card
2) once i reboot, it ---- does NOT ---- boot from sd card anymore
All I want is bootable sd card with cm7.1 on it so that I can give it to a friend of mine
what am I doing wrong
is there a way to force nook to boot from sd card?
I think if it finds cwr on emmc and cwr on sd, it boots from emmc or something
Click to expand...
Click to collapse
Only put the CM7 zip file on it for the first boot.
use easeus partition software to extend the size of the boot partition to 200 MB after you flash the card with verygreens installer, but before you put cm7 and gapps on there.
I bet you it fails to write the kernel during the install because there is insufficient space - try it again without resizing and pay attention to the readout when it scrolls down the screen, you'll see.
cm7.1 + gapps is almost your whole boot partition, for me it leaves only half a megabyte of free space - that's not enough to unpack and install what's needed.
DizzyDen said:
Only put the CM7 zip file on it for the first boot.
Click to expand...
Click to collapse
hmm, that did it
mrkkk said:
hmm, that did it
Click to expand...
Click to collapse
LOL
Sorry for the OP but also happy for you that your NC is up and running.
I keep saying many times, do it one at a time.
...........
Sorry to bring this thread back but I'm having the same problem using verygreen's tutorial on my NC 1.3. However after booting the NC I get the "cyanogen mod loading..." screen shortly followed by a blank screen (Nook doesn't turn off, though). If I remove the SD card the nook starts up as it normally would.
Followed the advice of these other members (extended partition size to 16gb/16gb, haven't installed gapps either) but I still can't get it to work.
I'm using the latest nightly release of CM7 following the link on verygreen's tutorial released on 11/23. Should I use a stable version instead?
Thanks...
emak212 said:
Followed the advice of these other members (extended partition size to 16gb/16gb, haven't installed gapps either) but I still can't get it to work.
Click to expand...
Click to collapse
There's where you made your mistake. The recommendations of the others on the forum were probably to expand the partition created by verygreen's image to something like 200MB or 250MB. The scripts in the image create and format 3 other partitions in addition to the one created by verygreen's image. When you expanded it to the full size of the SD card there was no room to create the additional partitions.
I would suggest you re-apply verygreen's image, expand it to 250MB and try again.
- Aerlock
Touchscreen Problems
Hello,
I have tried doing this several times, and I get no response from the touchscreen. Everything else works perfectly, but the touchscreen won't respond.
Please help.
Update on Touchscreen Issue
CM7 works fine off the 8GB. Is there something different you have to do to get the 32 to work?
Touchscreen Issue Explained
upthepool said:
Hello,
I have tried doing this several times, and I get no response from the touchscreen. Everything else works perfectly, but the touchscreen won't respond.
Please help.
Click to expand...
Click to collapse
From: Eyeballer:
http://forum.xda-developers.com/showthread.php?t=1030227
****BRAND NEW NOOK COLORS (Dec 2011+/Jan 2012+ are now shipping with a different touchscreen/digitizer (same as used in the nook tablet). As of now this driver is not included in CM7, you are welcome to try to flash CM7, if your touchscreen is unresponsive, restore to stock or flash CM9. CM9 will work as the driver is included.***
It appears that 7.1 works, as well as the most recent nightly from Nov.
Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help
Stjpa said:
Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help
Click to expand...
Click to collapse
Are you unzipping the right file? You said something about with stock recovery and without. Those are not image files that can be burned. When you unzip my image zip file, you should end up with a 300MB .img file. That is what you burn with win32diskimager. And take the card out of the PC and put it back in before you try to look at it. And be sure to use an external card reader, not one built into your PC.
Sent from my Nook HD+ using Tapatalk
Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.
Stjpa said:
Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.
Click to expand...
Click to collapse
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk
leapinlar said:
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
Yes I did unzip the image file before I burned it. I ended up finding a cwr zip that was for a 4 gig card, probably an older way of doing it, and that worked for some reason. I did use your stock 1.4.3 zip though and all seems well. Your tips page is great, thank you, you're very helpful now I can play around and brick it again with some other stuff.
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
No nothing was done by B&N. It is how you are burning the card. It will not boot in the nook unless burned perfectly. Look at my tips thread linked in my signature and read items A9 and A10.
There not any easy was not to use a bootable recovery card. Just keep trying, using different software, different cards, different PC s, different card readers.
Sent from my Nook HD+ using Tapatalk
ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
Use win32diskimager instead and use an external card writer. The image is approximately 300mb with the Rev5 file. Then copy the CM10 and 2021011 GApps zips to SD card. Insert in Nook Color. Wait for setup to finish and shut down. Start Nook. Enjoy.