Hello everyone here at xda-developers.
A few days ago I was watching streams on my Asus Transformer TF101(B70). Suddenly out of nowhere the tablet shuts off and starts an infinite loop which I simply cannot get it out of. I end up restoring the tablet to factory default and load a stock kernel onto my tablet using adb push. Since the tablet doesn't have any rom installed at this point I try to push CyanogenMod 9.0 onto my tablet in order to try and get my tablet to work and this is where the issues begin. First of all I try to push the rom onto /sdcard but that bugs my CWM 5.5.0.4 and will not allow me to access /sdcard and keeps telling me that there are "No files" when I'm trying to access /sdcard. If I restart into recovery it can access my files again but the pushed file is not there.
Afterwards I try again to push the file to /sdcard/download but then it tells me that this archive is Read-Only. I run a the "adb remount" command and it tells me it completed succesfully but when I push again it tells me that the archive is still Read-Only.
I've tried various commands but I can simply not change the archive into read/write. A few times I have succeeded in pushing the rom to /sdcard/download but when I try to locate the file it is simply not there and is not located anywhere on /sdcard despite the process being completed. I have simply no idea on how to get the rom file onto my tablet in order to restore it to normal and I was wondering if any of you have any ideas on how to get my tablet working again?
If you have any questions regarding information needed about just ask and I will provide the necessary information. I am really out of ideas on what to do.
Get a Micro SDCard and copy the ROM onto that from a PC, then put that in the TF and boot to recovery
*Detection* said:
Get a Micro SDCard and copy the ROM onto that from a PC, then put that in the TF and boot to recovery
Click to expand...
Click to collapse
I already have a MicroSD card in my tablet but I am not able to access it from CWM recovery
Try pushing the file to data/media.
Are you pushing the file while in cwm recovery?
baseballfanz said:
Try pushing the file to data/media.
Are you pushing the file while in cwm recovery?
Click to expand...
Click to collapse
I am pushing files while in recovery mode. I have already tried pushing to.other directories than /media/download but the same thing.happen. either it tells Me that the file system is read only or it says that the file transfer succeeded but the file cannot be located anywhere. I read up on the solution of trying to access a rom through microssd. Unfortunately my recovery doesn't support that unless I can change it to use external.memory instead of internal memory.
The only thing I succeeded in was getting a rom pushed to /system. Would I be able to access this directory from my recovery?
baseballfanz said:
Try pushing the file to data/media.
Are you pushing the file while in cwm recovery?
Click to expand...
Click to collapse
I am pushing files while in recovery mode. I have already tried pushing to other directories than /sdcard/download but the same thing happen. either it tells Me that the file system is read only or it says that the file transfer succeeded but the file cannot be located anywhere on /sdcard. I read up on the solution of trying to access a rom through microsd. Unfortunately my recovery doesn't support that unless I can change it to use external memory instead of internal memory but I do not know it that is possible.
The only thing I succeeded in was getting a rom pushed to /system. Would I be able to access this directory from my recovery?
WebberX said:
possible.
The only thing I succeeded in was getting a rom pushed to /system. Would I be able to access this directory from my recovery?
Click to expand...
Click to collapse
It would be better to try than to ask !
How did you get on, any luck yet ?
You could try flashing a new CWM that supports SDCards via NVFLASH
WebberX said:
If you have any questions regarding information needed about just ask and I will provide the necessary information. I am really out of ideas on what to do.
Click to expand...
Click to collapse
If you did a factory reset (and hence data loss is not a problem), your best option is using nvflash/wheelie to restore the device to a clean state with a stock firmware build and then reflash CWM to install whatever custom ROM you want.
After having rooted (with nexus 10 toolkit v1.3.0) my nexus 10 and flashed AOPK Nexus 10 (WIP) Task650 & Ktoonsez (1-4) rom, I'm unable to upload to, change or move any files or folders on my internal SD card. I installed Root Explorer and changed from Mount R/O to Mounted as r/w. Access is granted by Super SU. I also tried to change permission settings, unfortunatedly without any success. There appeared the following message:
"Warning
Permissions change was not successful. Please note that some file systems (e.g. SD card) do not allow permission changes."
Is there a possibility to change these permissions in order to be able to create and move files and folders on my SD card?
Thanks for taking your time to help me with my issue!
Anzirothu
1. Clear cache
2. Clear dalvik
3. Fix Permissions
forgot something ?
Thank you for your reply, Patrik!
1. done.
2. done.
3. Fix Permissions - How? With cwm? I did fix permissions with cwm recovery, but the problem persists...
Just so we are clear, when you say "upload to, change, or move" are you meaning you cannot copy a file from your computer to your Nexus 10? Or just that you cant arrange stuff through root explorer from within the tablet itself?
Neither copying from PC to Nexus nor arranging stuff through root exlorer from within the tablet itself. I can't even download an email attachment and put it to the SD card. The card seems to be locked.
I had that problem once but I dont remember what caused it or what exactly I did to fix. I think I just did a complete wipe by locking and unlocking the bootloader and then installing a new ROM again.
I think I did this too (unroot, lock bootloader, then root and unlock bootloader) and then installed the same rom again. I will try it this time with another rom.
Isn't there really no other solution to get access to my SD card again??
Thx for your help!
Are you using a toolkit to unlock and root? If so them maybe it is not doing something right and it messing up a permissions somewhere. It could also be a driver problem on your PC with being unable to copy a file to the tablet.
Thank you for your help!
I am using the nexus 10 toolkit V1.3.0. Right now I'm trying to intall twrp recovery with a fully wiped sd card. No easy task fot me being a noob...
In ClockWorkMod, make sure that /data is mounted
Then download the Android SDK: http://developer.android.com/sdk/index.html
I usually put all the files just in C:/android-sdk-windows
Once you have it all there open up the SDK Manager and download all the additional files needed. You probably only need to download "Android SDK Tools" and "Android SDK Platform-tools", but I always download the other files for whatever version of Android I am running, in our case Android 4.2. That way I have them if I need to do something else.
Once downloaded, open the Android-sdk-windows/platform-tools directory. copy:
adb.exe
adbWinApi.dll
adbWinUsbApi.dll
fastboot.exe
to your base C:/Android-SDK-Windows directory.
Now open command prompt from Start -> run
type: cd C:/Android-SDK-Windows
type: "adb devices" and it should list your tablet. It will actually say something with your devices serial number and then "Recovery" after it, showing your tablet is in recovery. If you dont see this then you either dont have your tablet mounted right from in the Recovery, ClockWorkMod is stupid, or you dont have working adb drivers.
Now copy the ROM you want to flash to C:/Android-SDK-Windows
Then type: "adb push blahblahblah.zip /data/media/0"
That should push the ROM to the root of your SD card. Give it time, it takes a while to push a ROM file. Once it is done, flash the ROM.
That *should* put it in the right spot where it looks like it is on your "internal storage" (what you see when navigating files within the ROM). If you dont see the ROM in clockworkMod then keep navigating back to the root of your internal storage and then open up "data", then "media", then "0" and you should see it. If you still cant find the ROM, push it again but just use "/data/media" as the location.
I just did all these steps myself to verify I remembered it all correct and I was able to successfully copy a ROM and find it on my tablet to flash by doing everything I just listed above. SO you should be good to go if you follow all those steps properly. I know it looks like a lot of work, but it really isnt and will go quite fast. Most of it is just the setup for getting ADB and Fastboot ready to use.
For a ROM to install, I would recommend to someone new like you either of these:
http://forum.xda-developers.com/showthread.php?t=2071082
^^^^^ That one is pretty close to the stock ROM with a few fixes and a couple extra features
or: http://forum.xda-developers.com/showthread.php?t=2071082
^^^^^ This one is pretty much CyanogenMod 10.1, but built by a different guy and not pulling every new thing from CM, just the "cherry picks" of features. It tends to be a bit more stable and less buggy than the real CM10.1 nightly's
And for a kernel you can flash and forget you will want to try this one:
http://forum.xda-developers.com/showthread.php?t=2098157
^^^^^ To flash that you will want to do a similar thing as how you pushed the ROM to your device. Only this time you will copy the kernels' "boot-r4.img" file into your android-adk-windows directory and use the command: "fastboot flash boot boot-r4.img"
While I enjoy the KTManta kernel more, it does require a bit of tweaking to get running perfect. Which is one of the things I like about it because of all the options to tweak. But for someone just learning this stuff that would be a bad thing, so Franco's kernel is much better than stock and doesnt require you to adjust anything once it is flashed to your tablet.
my nexus 4 was rooted with 4.3 but then i decide to upgrade to 4.4
this is the video i am trying to follow, basically just wipe & install which i did most the time.
youtube title "NEXUS 4: HOW TO MANUALLY UPDATE TO ANDROID 4.4 KITKAT"
it has two files one is mako and one is gapp.
after i did all the wiping in cwm and try to install the mako file, it shows "no file context" or sth similar, and installation is abort (i think there is problem when i transfer the file), but then i continue to install the gapp file (what the hell was i thinking?)
so now i am stuck in the google start up loop, i can only access cwm recovery mode and don't have a valid rom to install in my sdcard.
i tried to adb push another rom to the sdcard with no success (my storage was already very low, any way to remove files in the storage at this point?)
the "mount & storage" also doesn't seem to let me mount the sdcard (but system shows up "unmount").
so now i don't know what to do.
if anything has any idea or suggestion please let us know.
i am quite desperate now with a dead phone and will try anything.
thanks for reading such a long thread.
Dude that vid is old and it installs pa or some other port just flash factory images from google
Sent from my F1 using xda app-developers app
try to sideload a zip with ADB in recovery. no need to copy to your internal storage.
also try to connect with adb shell, then you can delete some files manual with rm.
Frickelpit said:
try to sideload a zip with ADB in recovery. no need to copy to your internal storage.
also try to connect with adb shell, then you can delete some files manual with rm.
Click to expand...
Click to collapse
any step by step guide to do this?
i am still new to this thing even i install a few roms before.
i will google it now, but any additional info is much appreciate.
thanks
Frickelpit said:
try to sideload a zip with ADB in recovery. no need to copy to your internal storage.
also try to connect with adb shell, then you can delete some files manual with rm.
Click to expand...
Click to collapse
frustrated..
i can't seem to get my windows to recogize the device (when i type adb devices, it shows an empty list)
already try trouble shooting this for a long time with no result.
any idea?
telly0050 said:
frustrated..
i can't seem to get my windows to recogize the device (when i type adb devices, it shows an empty list)
already try trouble shooting this for a long time with no result.
any idea?
Click to expand...
Click to collapse
after tons of troubleshooting finally got it back to work.
it ends up the reason is i didn't update to the latest cwm at the very beginning.
and sideloading 4.4 didn't work because of that too, i have to install an old 4.2 to have it working.
I am trying to get the F2FS file structure and I can't find the SlimKat Rom or GAPPS files on my tablet. All I have is a laptop with Win8, which has copies of the needed files on there. Is there a way that I can get the .ZIP files onto my tablet, or make my laptop work like an OTG-USB? I'm not in the US and I don't know if I can get an OTG cable any time soon.
Thanks.
steve626 said:
I am trying to get the F2FS file structure and I can't find the SlimKat Rom or GAPPS files on my tablet. All I have is a laptop with Win8, which has copies of the needed files on there. Is there a way that I can get the .ZIP files onto my tablet, or make my laptop work like an OTG-USB? I'm not in the US and I don't know if I can get an OTG cable any time soon.
Thanks.
Click to expand...
Click to collapse
So is your situation:
Tablet is wiped
Partitions are formatted to f2fs
Recovery still functioning
If that is the case, then just use the sideload function. For TWRP, its under the advanced menu. Start sideload mode in TWRP, then on the PC open a command window in the directory where the files are (google to see how to add that function to the windows right click menu...really handy). Then:
adb sideload yourfilenamehere
Do it for both files.
Done.
brizey said:
So is your situation:
Tablet is wiped
Partitions are formatted to f2fs
Recovery still functioning
If that is the case, then just use the sideload function. For TWRP, its under the advanced menu. Start sideload mode in TWRP, then on the PC open a command window in the directory where the files are (google to see how to add that function to the windows right click menu...really handy). Then:
adb sideload yourfilenamehere
Do it for both files.
Done.
Click to expand...
Click to collapse
Even Recovery was stuck in a loop. I used a toolkit to flash back to all stock, it's working. Maybe I'll mess around with it again. Thanks.
EDIT: If you are coming here for the first time, this guide should still work, but @PorygonZRocks has created a flashable zip that should deal with a lot of these issues automatically. You can check out his post here:
https://forum.xda-developers.com/showpost.php?p=75787067&postcount=699
This method will indirectly allow you to root the LG Gpad v410 after it has been upgraded to Lollipop 5.1.1. Yes. Rooting LG v410 Lollipop. It's through a downgrade, but it works.
It took a while to get working, but here's how I did it. The process is straightforward, but the details matter greatly. You will brick your device if you mess up. Please read everything *first* before you do anything. Be sure you understand the process. I'll try to explain what's going on along the way.
An external SD card is extremely helpful for this process. You *could* adb push everything, but that will tedious.
First, you need some files.
The 4.4.2 KDZ which is a TEST OS, but it can be rooted and it downgrades to a Bump'able bootlaoder:
http://forum.xda-developers.com/g-pad-10/general/kdz-lg-g-pad-7-0-v410-t3224867
The LG 2014 Flash Tool:
http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
Android LG Drivers:
https://www.androidfilehost.com/?fid=24052804347802528
Parted for Android. You can probably find it other places, but I found this file:https://dl.dropboxusercontent.com/u/84115590/LG%20G2%2016GB%20Solution/sdparted-recovery-all-files.zip
EDIT: There seems to be a lot of confusion here. My bad. All you need is the file named "parted" from this zip file - nothing else. Just put that one file in the root of your external SD card.
https://dl.dropboxusercontent.com/u/84115590/LG G2 16GB Solution/sdparted-recovery-all-files.zip linked from here: http://www.**********.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/
EDIT2: The dropbox link is down. I've attached the file directly.
The Candy5 ROM (This will potentially save you some manual steps. Somewhat optional, but highly recommended):
http://forum.xda-developers.com/g-pad-10/development/rom-candy5-g-pad-v410-lollipop-5-1-1-v2-t3111987
Flashify APK:
http://www.apkmirror.com/apk/christian-gollner/flashify/flashify-1-9-1-android-apk-download/
TWRP for the v410:
http://forum.xda-developers.com/g-pad-10/development/recovery-twrp2-8-5-0lgv400-410-t3049568
LG One Click Root:
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
(You may use Purple Drake or whatever else you want. They all use the same root script as this does and the GUI is helpful for novices.)
Android SDK (specifically adb.exe. After installing go to SDK Manager and ensure that Android SDK Platform Tools is checked):
http://developer.android.com/sdk/index.html
For clarification below, when I have commands in "quotes" they are Windows commands. When they are in `backticks` they are commands that you run inside of ADB which actually run on your device....as root. Root can screw things up. Please be extra cautious. If you blame me for messing up your device I will laugh at you. But that's not gonna happen, right? Good. Let's go.
Now that you have everything, put it all into a folder where you can access it easily.
Install the LG Drivers.
Install Android SDK (or otherwise get adb.exe).
Extract all of the archives.
Move the KDZ to the LG Flash Tool 2014 folder.
Put the tablet into Download Mode by powering it off, holding VolUp, and plugging in the USB cable. Press VolUP when instructed. You must be in Download mode before continuing.
Run LGFlashTool2014.exe. Select the KDZ file. Click "CSE Flash". Click "Start". Select "English" and click OK. Do not change anything else.
WAIT for the flash to continue. If you really want to brick your device, here's a good opportunity.
The device will reboot into Android 4.4.2. You will only have 4GB of internal storage at this point. DON'T PANIC! We are fixing it.
Enable USB debugging.
Connect the device.
Install and run LG One Click Root. Wait for the device to be rooted before proceeding.
Copy the Flashify apk, TWRP image, and Candy5 ROM to your external SD card.
Install Flashify and flash TWRP to the recovery partition.
Use the Flashify menu to reboot in to recovery.
DON'T PANIC! You will get white vertical lines on the boot screen from now on. They only show up during boot animations. A small price to pay. This may be fixed at a later date. for the time being! Thanks to marcsoup's first post ever, we have a fix! Details below. PLEASE click this link and thank him!
Things get tricky here. Copy parted to your external SD card and then run "adb shell" from Windows to get a shell in TWRP.
In TWRP, unmount /data by tapping Mount > uncheck Data.
`cp /sdcard/parted /sbin/` This copies the parted binary to /sbin so it can be executed in the path. I had trouble running `/sdcard/parted`, but YMMV.
`chmod +x /sbin/parted` Make it executable.
`parted /dev/block/mmcblk0` Run parted against the internal mmc
`p` Prints the partition table.
`rm 34` Deletes partition 34 labeled "grow". This is the root of our problem. The KDZ apparently only creates a 4GB partition, I assume so the test build has maximum compatibility with all sized devices.
`rm 33` Deletes partition 33 "userdata"
`p` Print to verify
`mkpartfs` Create a partition and put a filesystem on it. If we only expand the partition it won't help us because the filesystem is still only 4 GB.
a) name: userdata
b) type: ext2 (the tool only supports ext2. This is ok for now.)
c) start: 3439MB (the end of part 32. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the MB part otherwise the offset will overwrite another critical partition.
d) end: 15.8GB (where "grow" ended above. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the GB part otherwise the offset will overwrite another critical partition.
`p` Verify. For me it did not name the partition properly. Gotta fix that.
(if necessary) `name 33 userdata` This is critical for mount to find it in /dev/block/platform/msm.sdcc.1/by-name/ on some/all ROMS.
`p`. Verify one last time. Compare it to my partition table in the attachments. If you want to brick, delete some random partitions here.
Flash Candy5 with TWRP. It's only 239 MB, so it will flash quickly. I do this because Candy5 will reformat mmcblk0p33 from ext2 to ext4 for you. It does this as part of it's system boot, apparently. If you install a different ROM that does not do this, you can reformat it by running `make_ext4fs /dev/block/mmcblk0p33`. If your ROM does not have make_ext4, it likely has some differnt method to make an EXT4 filesystem. `/system/bin/mke2fs -t ext4 /dev/block/mmcblk0p33` may work better. Just flash Candy5 and be done with it.
Tap Wipe > Swipe to Factory Reset.
Tap Reboot > System.
WAIT!!! It will take a minute for the ROM to start the first time. You will have white lines and and possibly a white screen. WAIT. It's moving the DEX files to cache, formatting a partition, creating default folders on the internal storage, and several other things. WAIT! When the screen goes dim or turns off then it's ready.
Cycle the display or turn it on. You should be at the Candy5 lock screen.
USB debugging is on by default. Run "adb shell".
`mount | grep userdata` Make sure mmcblk0p33 is mounted.
`df` Make sure /data is 11.3 GB (or whatever size it is on non-16GB devices).
HELL YEAH, you downgraded, rooted, and fixed the partition problem. Enjoy your tablet!
Thanks to dopekid313 for finding the KDZ.
Thanks to timmytim for Candy5.
Thanks to the creators of the root script, flashify, TWRP, and XDA for being so awesome.
Thanks to marcsoup for fixing a fix to the white lines.
Thanks to navin56 for the partition dumps. PLEASE thank his post!
White lines fix.
What we are going to do is flash the aboot partition with the stock image provided by navin56. I've removed the extra files from the dump, so simply download aboot.img.7z below. Unzip it using 7zip.
These commands are to be run in TWRP. Reboot to TWRP recovery and connect with "adb shell". All of the following commands will be run in ADB under TWRP. If you cannot figure out how to get here, please post in the thread and someone will help you. Onward:
If you do everything correctly then you don't have to reflash your ROM and you won't lose data. This process can be done any time after flashing the KDZ, even before you follow the steps above to resize the userdata partition. It's a completely separate process.
Unzip aboot.img.7z so you have the file named aboot.img. You should also make sure that aboot.img's MD5 sum is e97431a14d1cee3e9edba513be8e2b52. Do not flash the 7z file. Please.
Copy aboot.img to your external SD card. It should live at /sdcard/aboot.img
Boot to TWRP and run "adb shell"
`ls -al /dev/block/platform/msm_sdcc.1/by-name/` Let's make sure we are flashing the right partition. On my device "aboot" is /dev/block/mmcblk0p6. You should verify this on your device or you WILL brick your tablet.
`dd if=/dev/block/mmcblk0p6 of=/sdcard/aboot-fukt.img` Let's back up our current aboot partition before we go flashing things just in case there are unintended consequences later. Be sure you have the same partition that "aboot" referred to in the 4th step or you have just backed up the wrong partition.
`dd if=/sdcard/aboot.img of=/dev/block/mmcblk0p6` Be sure the file exists, is the correct aboot.img, and you are flashing the right partition. You have been warned!!
Reboot TWRP and enjoy your boot animations again.
If I missed anything, please let me know. As far as I know this is the very first tutorial that details what is necessary to accomplish this. Please hit the Thanks button on every thread that you visit to download files!
FAQ:
Q: Why do I only have 11.3 GB of space when my device is 16GB?
A: The entire internal SD card (eMMC) is 16 GB. Gotta have someplace to install the bootloader, recovery, android, the modem OS, the secondary bootloader, the cache, the resource and power manager, and all of the other partitions necessary for the table to operate. Please look at the second screenshot in the OP. All of those 33 partitions take up room on the internal card. Fortunately ALL of those partitions ONLY take up about 4.4 GB. Hence the 'userdata' partition is ~11.3 GB.
If anyone wants to use my work to create a flashable zip to make it easier for novices, please do so. My problem is solved and I don't have the time to create the zip. Please post any questions and I'll gladly answer them! I'm so stoked that we have a usable downgrade method now!
Thank You, Worked Great
Thanks for making this I was gonna do it but was to lazy lol and thanks for linking my thread and giving cred instead of just linking straight to the kdz thank you
grandamle91 said:
Thank You, Worked Great
Click to expand...
Click to collapse
Glad to be of help!
dopekid313 said:
Thanks for making this I was gonna do it but was to lazy lol and thanks for linking my thread and giving cred instead of just linking straight to the kdz thank you
Click to expand...
Click to collapse
Of course! If you hadn't obtained the firmware then we'd all still be looking for a solution. It pisses me off to no end when people try to take credit for other people's work. We all just need to realize and acknowledge that we are simply standing on the shoulders of those who did the work necessary for each of us to do our work.
I just noticed since we formatted the userdata it screws up TWRP. It won't mount Data and it says the settings are corrupted
grandamle91 said:
I just noticed since we formatted the userdata it screws up TWRP. It won't mount Data and it says the settings are corrupted
Click to expand...
Click to collapse
Is this after you've rebooted into Candy5 and the partition is reformatted as ext4 (or you've done so manually)? TWRP may not be able to mount an ext2 partition.
EDIT: I just tested this. Following my instructions and flashing to Candy5, TWRP sees mmcblk0p33 (userdata) as the full size and mounts it at /emmc.
For clarification, after you run the parted commands, it will mess with the partition table and TWRP will most likely not be able to see it to remount it - at least not until after a reboot. This is why you need an external SD card from which to install ROMs.
/data not mounted
Edit: nevermind. The partition 33 was still ext2. I had to run make_ext4fs /dev/block/mmcblk0p33 and now I am able to mount /data. Thanks.
Thanks for taking the time to help us.
I followed the steps and till 33 I am good. But once I am in Candy5, I am not able to adb shell (adb not recognizing device eventhough usb debugging is on). I rebooted to recovery and adb works there. But my /data partition is not enabled in TWRP. I am not able to check it either under Mount in TWRP.
Code:
mount | grep userdata
is empty
Code:
df
does not show data
I tried this and my tablet bootlooped. I was able to get into fastboot and restore. I would GREATLY appreciate it if someone who has the time, would kindly donate their valuable time to into making an exe zip or something.
gridironbear said:
I tried this and my tablet bootlooped. I was able to get into fastboot and restore. I would GREATLY appreciate it if someone who has the time, would kindly donate their valuable time to into making an exe zip or something.
Click to expand...
Click to collapse
At what point did it bootloop? What was the last step that you took before rebooting?
Zip
I would really appreciate a zip file as I have never been savvy with adb and for whatever reason it doesn't want to work on Windows 10.
drumm3rb0y said:
I would really appreciate a zip file as I have never been savvy with adb and for whatever reason it doesn't want to work on Windows 10.
Click to expand...
Click to collapse
A zip file for what part? The only part that requires ADB directly is to fix the internal storage. You absolutely have to flash the KDZ and then root before you can do anything. If you are on 5.x then you have no possible way to root, much less flash a zip file.
If you tell me what exactly you are having issues with I will try to help.
fatbas202 said:
A zip file for what part? The only part that requires ADB directly is to fix the internal storage. You absolutely have to flash the KDZ and then root before you can do anything. If you are on 5.x then you have no possible way to root, much less flash a zip file.
If you tell me what exactly you are having issues with I will try to help.
Click to expand...
Click to collapse
The adb part is the part im having issue with. Everything else is flashed already. I was wondering if you could make a zip for the adb part so I can just flash it through twrp.
thanks for the great help. it did work perfectly to regain the lost space.
what about white lines ? is there any solution for that problem ?
I have tried flashing back stock recovery extracted from kdz, dd' but didn't help.
Now i am thinking of flashing back the aboot.bin extracted from original kdz or i can dump ".img" from another working device. (i have 4 similar devices)
what is your opinion i m not a developer and i need your advise. should i go ahead and which partition should i dd ? aboot or abootb or boot ?
regards
shahidmianoor said:
thanks for the great help. it did work perfectly to regain the lost space.
what about white lines ? is there any solution for that problem ?
I have tried flashing back stock recovery extracted from kdz, dd' but didn't help.
Now i am thinking of flashing back the aboot.bin extracted from original kdz or i can dump ".img" from another working device. (i have 4 similar devices)
what is your opinion i m not a developer and i need your advise. should i go ahead and which partition should i dd ? aboot or abootb or boot ?
regards
Click to expand...
Click to collapse
I have no solid evidence of this, but I suspect that the white lines are caused by a display driver issue where when the bootloader hands over control of the display to the kernel it doesn't get reinitialized properly. I have no ideas as to how to get rid of that at the moment but if I stumble across something I'll be sure to post here.
While I'm not an Android developer, I've been a Linux admin for 10+ years and have a lot of experience with Android devices. I'd be really hesitant to go flashing things ad hoc. While Download Mode may save you if you flash the wrong thing, I'm not entirely sure what the limitations that you may run in to with a locked bootloader are.
After having this device for months on 5.x and FINALLY being able to downgrade and run custom ROMs with root, not seeing a boot animation is a pittance to pay. But I'll keep looking.
i have same problem entered in TWRP but when ADB sheel thorough DP tools it didn't connect to my device. i m also using windows 10
Do I need to Re-mount Data ? I press format data button at TWRP and mount data. It looks work great.
After all process, it shows 16Gb total at storage, 11.04GB available. it works perfectly.
I need the stock V41010d, so I reflash the stock rom rooted at [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2 | Rooted + Busybox
Now, my Gpad is at stock V41010d, but I have a question about the boot screen, is it still with white lines and white screen? Any method to fix it?
Hello,
Thanks for the great work. unfortunately I am facing some difficulty, starting from step# 16 "Things get tricky here", how to run"adb shell in TWRP?
also can I use minimal_adb_fastboot_v1.1.3_setup.exe as mentioned in the link in the OP http://www.droidviews.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/ ?
also I noticed the path have been used includes 'parted' folder, but the folder I have after unzipping the parted zip called 'sdparted-recovery-all-files', do I rename the folder to 'parted' instead?
please help and excuse my broken English.
I'm also having trouble with the adb shell step. When my device is powered on normally, adb commands work. However, in TWRP mode my computer can't recognize the tablet, mount properly, and copy over parted. All the steps have been identical to this point. Any ideas?
iphone5sf said:
Do I need to Re-mount Data ? I press format data button at TWRP and mount data. It looks work great.
After all process, it shows 16Gb total at storage, 11.04GB available. it works perfectly.
I need the stock V41010d, so I reflash the stock rom rooted at [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2 | Rooted + Busybox
Now, my Gpad is at stock V41010d, but I have a question about the boot screen, is it still with white lines and white screen? Any method to fix it?
Click to expand...
Click to collapse
You shouldn't need to remount or format data. The parted command nukes the filesystem and creates a new one formatted as ext2. At this point the running kernel has the old partition table loaded and won't know that the partition has been extended. Simply flash Candy5 and reboot at this point and it will reformat the userdata partition.
See above for the white lines during the boot animation. Known issue, no fix in sight, doesn't really matter.
nmnm4alll said:
Hello,
Thanks for the great work. unfortunately I am facing some difficulty, starting from step# 16 "Things get tricky here", how to run"adb shell in TWRP?
also can I use minimal_adb_fastboot_v1.1.3_setup.exe as mentioned in the link in the OP http://www.droidviews.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/ ?
also I noticed the path have been used includes 'parted' folder, but the folder I have after unzipping the parted zip called 'sdparted-recovery-all-files', do I rename the folder to 'parted' instead?
please help and excuse my broken English.
Click to expand...
Click to collapse
You only need the sdparted-recover-all-files.zip from that site. "parted" is not a folder, but the binary (without a file extension) inside of that zip file. Copy that file to /sbin and you are in business.
zmali1 said:
i have same problem entered in TWRP but when ADB sheel thorough DP tools it didn't connect to my device. i m also using windows 10
Click to expand...
Click to collapse
summonholmes said:
I'm also having trouble with the adb shell step. When my device is powered on normally, adb commands work. However, in TWRP mode my computer can't recognize the tablet, mount properly, and copy over parted. All the steps have been identical to this point. Any ideas?
Click to expand...
Click to collapse
I'd recommend installing the SDK and pulling the drivers from that. Alternatively, you can try the drivers here: https://github.com/koush/UniversalAdbDriver.
Technically, when I ran the "parted" commands I was actually booted in to rooted 4.4.2 from the KDZ; I wasn't actually in TWRP. It's just not a very recommended way of going about it. I explained how to run all of this from TWRP, but there's no technical reason that you *can't* run this from Android. You just *shouldn't* because you can't cleanly unmount the filesystem and it theoretically could cause filesystem corruption. I just figured that I don't care about that partition getting corrupted since it's getting wiped out.