Can't write on internal SD card after root - Nexus 10 Q&A, Help & Troubleshooting

Can't write on internal SD card after root - Nexus 10 Q&A, Help & Troubleshooting

After having rooted (with nexus 10 toolkit v1.3.0) my nexus 10 and flashed AOPK Nexus 10 (WIP) Task650 & Ktoonsez (1-4) rom, I'm unable to upload to, change or move any files or folders on my internal SD card. I installed Root Explorer and changed from Mount R/O to Mounted as r/w. Access is granted by Super SU. I also tried to change permission settings, unfortunatedly without any success. There appeared the following message:
"Warning
Permissions change was not successful. Please note that some file systems (e.g. SD card) do not allow permission changes."
Is there a possibility to change these permissions in order to be able to create and move files and folders on my SD card?
Thanks for taking your time to help me with my issue!
Anzirothu

1. Clear cache
2. Clear dalvik
3. Fix Permissions
forgot something ?

Thank you for your reply, Patrik!
1. done.
2. done.
3. Fix Permissions - How? With cwm? I did fix permissions with cwm recovery, but the problem persists...

Just so we are clear, when you say "upload to, change, or move" are you meaning you cannot copy a file from your computer to your Nexus 10? Or just that you cant arrange stuff through root explorer from within the tablet itself?

Neither copying from PC to Nexus nor arranging stuff through root exlorer from within the tablet itself. I can't even download an email attachment and put it to the SD card. The card seems to be locked.

I had that problem once but I dont remember what caused it or what exactly I did to fix. I think I just did a complete wipe by locking and unlocking the bootloader and then installing a new ROM again.

I think I did this too (unroot, lock bootloader, then root and unlock bootloader) and then installed the same rom again. I will try it this time with another rom.
Isn't there really no other solution to get access to my SD card again??
Thx for your help!

Are you using a toolkit to unlock and root? If so them maybe it is not doing something right and it messing up a permissions somewhere. It could also be a driver problem on your PC with being unable to copy a file to the tablet.

Thank you for your help!
I am using the nexus 10 toolkit V1.3.0. Right now I'm trying to intall twrp recovery with a fully wiped sd card. No easy task fot me being a noob...

In ClockWorkMod, make sure that /data is mounted
Then download the Android SDK: http://developer.android.com/sdk/index.html
I usually put all the files just in C:/android-sdk-windows
Once you have it all there open up the SDK Manager and download all the additional files needed. You probably only need to download "Android SDK Tools" and "Android SDK Platform-tools", but I always download the other files for whatever version of Android I am running, in our case Android 4.2. That way I have them if I need to do something else.
Once downloaded, open the Android-sdk-windows/platform-tools directory. copy:
adb.exe
adbWinApi.dll
adbWinUsbApi.dll
fastboot.exe
to your base C:/Android-SDK-Windows directory.
Now open command prompt from Start -> run
type: cd C:/Android-SDK-Windows
type: "adb devices" and it should list your tablet. It will actually say something with your devices serial number and then "Recovery" after it, showing your tablet is in recovery. If you dont see this then you either dont have your tablet mounted right from in the Recovery, ClockWorkMod is stupid, or you dont have working adb drivers.
Now copy the ROM you want to flash to C:/Android-SDK-Windows
Then type: "adb push blahblahblah.zip /data/media/0"
That should push the ROM to the root of your SD card. Give it time, it takes a while to push a ROM file. Once it is done, flash the ROM.
That *should* put it in the right spot where it looks like it is on your "internal storage" (what you see when navigating files within the ROM). If you dont see the ROM in clockworkMod then keep navigating back to the root of your internal storage and then open up "data", then "media", then "0" and you should see it. If you still cant find the ROM, push it again but just use "/data/media" as the location.
I just did all these steps myself to verify I remembered it all correct and I was able to successfully copy a ROM and find it on my tablet to flash by doing everything I just listed above. SO you should be good to go if you follow all those steps properly. I know it looks like a lot of work, but it really isnt and will go quite fast. Most of it is just the setup for getting ADB and Fastboot ready to use.
For a ROM to install, I would recommend to someone new like you either of these:
http://forum.xda-developers.com/showthread.php?t=2071082
^^^^^ That one is pretty close to the stock ROM with a few fixes and a couple extra features
or: http://forum.xda-developers.com/showthread.php?t=2071082
^^^^^ This one is pretty much CyanogenMod 10.1, but built by a different guy and not pulling every new thing from CM, just the "cherry picks" of features. It tends to be a bit more stable and less buggy than the real CM10.1 nightly's
And for a kernel you can flash and forget you will want to try this one:
http://forum.xda-developers.com/showthread.php?t=2098157
^^^^^ To flash that you will want to do a similar thing as how you pushed the ROM to your device. Only this time you will copy the kernels' "boot-r4.img" file into your android-adk-windows directory and use the command: "fastboot flash boot boot-r4.img"
While I enjoy the KTManta kernel more, it does require a bit of tweaking to get running perfect. Which is one of the things I like about it because of all the options to tweak. But for someone just learning this stuff that would be a bad thing, so Franco's kernel is much better than stock and doesnt require you to adjust anything once it is flashed to your tablet.

Related

Tayutama One Click Lag Fix!!!

********Please Mods remove thread if possible!! New Tatuyama fix (ext4) has been incorporated into SuperRooter by DesignGears ********
LINK: http://forum.xda-developers.com/showthread.php?t=751934
DISCLAIMER
DO IT ON YOUR OWN RISK.
ME OR ANYONE ELSE ON THIS FORUM IS NOT RESPONSIBLE FOR BRICKED/DEAD DEVICES AND/OR DEAD SD CARDS.
YOU SHOULD UNDERSTAND EVERY STEP IN THIS HOW-TO BEFORE ATTEMPTING TO FOLLOW.
**********EDIT LOG*******************
8/10/2010: Added Startup Issue Reversion
8/11/2010: Added Alternate Manual Method that might work better than AUTO
8/11/2010: Added Possible Method of Backing EXT2 Partition
Here everyone... I have been trying lag fixes all over the place and I always seem to have issues partitioning the external sd for the apps... so after so many attempts, this was BY FAR the best lag fix out there.... It doesn't rely on the externalsd for functionality.
Easy and nothing special needed.
The steps below are pretty good, but I did things a little different.
Copied the update.zip to my external sdcard.
Then used Root Explorer to copy the update.zip to my internal sd card.
(******Here is the updated filed: http://forum.xda-developers.com/attachment.php?attachmentid=376882&d=1281390347******)
Then I used ROM Manager (Reboot into Recovery) to boot into the Linux Loader
Then I said update using update.zip (not install update.zip)
Then Reboot
For some reason it didn't install busybox 1.17.1 so install it manually
(located: http://forum.xda-developers.com/showpost.php?p=7574130&postcount=229)
Make sure after you install busybox.apk that you go into busybox and check to MAKE SURE you are running 1.17.1 ONLY. You might have an older version or newer version but it must be 1.17.1; if different just click install.
After that follow the MCR Scripts below. (Took about 6 minutes to do everything)
*** If MCR Scripts DOES NOT show up, its probably because you don't have the non market install hack on your phone. In the update.zip you can find the apk and install via ADB, but I didn't do it this way. ******
(Original Thread! Alternate method on OP in link below! Some people say it worked better for them.)
http://forum.xda-developers.com/showpost.php?p=7587405&postcount=417
@Tayutama
I ran the Tayutama update.zip using the up+power+menu button method, it installed in seconds and I restarted the phone. I ran the benchmark but still got 8xx scores. I'm an Noob, so needed more thorough instructions. These are now given below. NOTE: THIS METHOD IS MUCH MORE NOOB FRIENDLY AND DOES NOT REQUIRE A PC OR USB DEBUGGING MODE.
EDIT I had realised I needed to launch the newly installed MCR app after restart and choose a lagfix file to run. I ran the file and 'all complete'. This worked a treat. Ran Quadrant and now have a top score of 2114 running on JM2. System is much snappier. This mod of RyanZA fix by Tayutama is the most noob friendly also. Full instructions as follows:
EDIT Requirements: Make sure your phone has 'superuser' app installed by checking your app list. If it isn't installed, you can use a newer beta version of Tayutama's update.zip
available at; http://forum.xda-developers.com/atta...4&d=1281437129
Full instructions:
1. The update.zip installs all the files needed. It is attached here; http://forum.xda-developers.com/atta...2&d=1281390347
2. Place it on your internal sdcard
3. Turn off your phone.
4. Hold down Up+powerbutton+Menubutton for a couple of seconds until u see the galaxy logo .
5. Use the up and down buttons to get to update.zip.
6. Press menu button on update.zip to select it
7. It installs root, correct busybox (1.17.1) as well as all the scripts needed for the fix and the 'MCR Scripts' app to run the scripts. (NOTE: This version does not install superuser.app which is needed, although the beta update.zip does, so read 'requirements' above if needed)
8. After install, the phone restarts.
9. Go to the newly installed 'MCR Scripts' application from the app list, open it and choose from 3 scripts. For example, Lagfix10024 is the 1gb ex2 version.
10. The script should run and take a few minutes.
11. You should see an 'all complete' prompt, and this means you can close the application.
12. Run quadrant to test if the fix was applied.
Originally Posted by Tayutama
Don't know if you mind me posting this here RyanZA, but i made a update.zip out of your script. NOTE THIS ONLY WORKS ON 2.1
What this update.zip file does is that it copies a few files to your internal sdcard and installs ASE which can be used to run .sh files without the need to use a terminal.
There are 3 scripts included:
LagFix1024.sh - Makes a 1GB file on /data
LagFix512.sh - Makes a 512MB file on /data
RemoveFix.sh - Removes the lagfix
This also includes BusyBox 1.17.1 so no need to install that first.
Testet this on JM1
Click to expand...
Click to collapse
********Alternate Method that might even work better!! ****************
All the files are located in the update.zip file that you need to download.
1. Connect phone to PC, make sure adb can see it:
adb devices
2. adb kill-server
3. adb push createlagfix.txt /sdcard/createlagfix.sh
4. adb push playlogos1 /sdcard/playlogos1
5. adb push userinit.sh /sdcard/userinit.sh
6. adb shell su -c "/system/bin/sh /sdcard/createlagfix.sh"
7. adb kill-server
8. adb reboot
************ Reverting back if there are boot up and black screen issues ****************
If you have black screen and doesn't boot into the desktop, this is the fix to return back to normal state:
To fix that problem:
1. Boot into Recovery Mode (Vol Up + Vol Down + Power) Let go of Power after you see AT&T.
2. Delete User Cache
3. Delete All User Data
4. Then see if your phone boots up
5. If your phone does boot up then navigate to Settings -> Security -> Factory Reset
6. After factory reset your phone should be useable again.
DO NOT INSTALL THIS UPDATE IF YOU DO NOT KNOW WHAT YOU ARE DOING.
**********Possible method of Backing up Your EXT2 Partition **********
BTW I would also perform a NANDROID Backup as well which can be done by using ROM Manager to boot into the Android Loader....
Nandroid does NOT back up the apps off your SD card.
AppsToSD (I'm speaking re MoDaCo's rom here) uses the ext2 partition on your SD card for the /data/app and /data/app-private folders, where your actual downloaded application files are kept. Nandroid does NOT back this up, and simply mounting your SD card and copying the files off also does not back this up.
The only way to back up these critical folders is to directly copy them to somewhere else. You can use command line or Droid Explorer.
If you want to use command line, do this from an ADB shell or terminal:
mkdir /sdcard/backup/
mkdir /sdcard/backup/app
mkdir /sdcard/backup/app-private
cp -r /data/app/* /sdcard/backup/app/
cp -r /data/app-private/* /sdcard/backup/app-private/
This will create two folders on your SD card: app and app-private, both in a folder called Backup. It will then copy the entire contents of your /data/app and /data/app-private folders to your SD card.
After you do this, back up the entire contents of your SD card as normal.
To restore the files after replacing/partitioning your SD card, head to this thread:
http://forum.xda-developers.com/showthread.php?t=585349
Click to expand...
Click to collapse

Quadrant score was 917 and was on stock roms.....
Now Quad score is 2193 and still on stock roms.....
Tested on 2.1 Update 1 Captivate
Baseband: I897UCJF6

slider2828 said:
Quadrant score was 917 and was on stock roms.....
Now Quad score is 2193 and still on stock roms.....
Tested on 2.1 Update 1 Captivate
Baseband: I897UCJF6
Click to expand...
Click to collapse
Does it show strong real world improvements?

good job explaining nothing. troll harder

So....
This is a ""one step"" that isn't one step... ?.. ?
Oh, and for anyone wondering....
This appears to be the ext2 fix.

This IS the same fix from the otger thread, just packaged in update.zip format. Id be a bit more cautious using this one as it hasnt had as much testing among the I9000 crowd much less Captivate users.

Zilch25 said:
This IS the same fix from the otger thread, just packaged in update.zip format. Id be a bit more cautious using this one as it hasnt had as much testing among the I9000 crowd much less Captivate users.
Click to expand...
Click to collapse
Thanks for confirming this. I am seeing strong real world improvements, too. Dolphin Browser HD is very snappy and everything seems a lot faster (I am on stock captivate, btw, couldn't get this to work on I9000 for some reason).
Only thing is you should back up frequently because it can be corrupted a lot more easily since it is on ext2.

hm... i applied the update in clockwork mod recovery, i have super user and the correct busybox version installed and rebooted the system. i went to the app list and could not find the "MCR SCRIPT" you mentioned i should be seeing... am i doing something wrong?

THat is weird I saw mine in the apps list.... its just called MCR with a green dog bowl and light bulb....
Woops sorry for the truncation in the quote.... I have attached the update.zip file that you need to download.... The update.zip file you used is probably a ROM Manager Update.zip, so just rename it and copy the new update.zip file to the internal sd....
Sorry.....

solufein said:
good job explaining nothing. troll harder
Click to expand...
Click to collapse
What the hell does that mean.... You saying it doesn't work? Why not try it and it is an EXT2 fix.
max_warheads said:
So....
This is a ""one step"" that isn't one step... ?.. ?
Oh, and for anyone wondering....
This appears to be the ext2 fix.
Click to expand...
Click to collapse
This isn't one step because I don't have the USB cable with me. I just had a USB adapter for the microsd and I can't boot into the linux loader correctly without the cable, so I used ROM Manager. It would have been easier if I did.
Zilch25 said:
This IS the same fix from the otger thread, just packaged in update.zip format. Id be a bit more cautious using this one as it hasnt had as much testing among the I9000 crowd much less Captivate users.
Click to expand...
Click to collapse
Yup it is but on the internal card. Are you sure its the same? Look at the OG thread, a LOT of people have tried it with great success....
darth_vato said:
Thanks for confirming this. I am seeing strong real world improvements, too. Dolphin Browser HD is very snappy and everything seems a lot faster (I am on stock captivate, btw, couldn't get this to work on I9000 for some reason).
Only thing is you should back up frequently because it can be corrupted a lot more easily since it is on ext2.
Click to expand...
Click to collapse
How do you back it up?

i updated the zip and rebooted used busy box and i dont have that MCR app

Bionicboto said:
i updated the zip and rebooted used busy box and i dont have that MCR app
Click to expand...
Click to collapse
Same instructions before, did you download the update.zip? I just added that instruction. Can you try again after that?

slider2828 said:
THat is weird I saw mine in the apps list.... its just called MCR with a green dog bowl and light bulb....
Woops sorry for the truncation in the quote.... I have attached the update.zip file that you need to download.... The update.zip file you used is probably a ROM Manager Update.zip, so just rename it and copy the new update.zip file to the internal sd....
Sorry.....
Click to expand...
Click to collapse
when you say put the update.zip into the phone... do i put it in the internal sd card root? or do i put it in the ROM MANAGER folder? when i choose apply update, it only gives me one option to update from: /sdcard/update.zip. i choose that it installs properly and i reboot. i still don't the app, lol.
i also have removed the the recovery-update.zip or renamed it and tried to reboot into recovery mode via ROM MANAGER but it doesn't let me do it because it can't find the zip. then i tried to put the update into the the ROM MANAGER folder and it says it can't the find update.

its still the same cant find the app i reboot to recovery apply sd card update.zip go to yes and it says installed reboot and its not there

arsinic said:
when you say put the update.zip into the phone... do i put it in the internal sd card root? or do i put it in the ROM MANAGER folder? when i choose apply update, it only gives me one option to update from: /sdcard/update.zip. i choose that it installs properly and i reboot. i still don't the app, lol.
i also have removed the the recovery-update.zip or renamed it and tried to reboot into recovery mode via ROM MANAGER but it doesn't let me do it because it can't find the zip. then i tried to put the update into the the ROM MANAGER folder and it says it can't the find update.
Click to expand...
Click to collapse
Sorry for the bad reply.
Rename the update.zip that is already on the internal sd cards root because that is ROM Managers using ROOT Explorer
Then copy the update.zip that you downloaded to the external SD card.
Then copy update.zip from the external sd card to the internal sd cards root.
Then use ROM Manager to reboot into the linux loader.
Hope that helps?
-Ken

slider2828 said:
Sorry for the bad reply.
The update.zip that you use download, copy it the the internal sd card's root... (Basically where ROM Manager update.zip was. Like you did Rename the update.zip that is already there, because that is ROM Managers).
Hope that helps?
Click to expand...
Click to collapse
hm... the only update.zip i have is in the Recovery Mod folder named: recovery-update.zip. the only update.zip i have in the sdcard root is the update.zip i downloaded from the your url and have been applying that as the update. i seem to be having the same problem as Bionicboto.
should i have the rom manager's update.zip in there also or it doesn't matter? and i also have no external sd card. is that something i need in order to get this update working properly?

Did you ever perform a backup with the ROM Manager? That usually creates a update.zip.....
Basically when I log into root explorer and click on SDCARD.... you should see the update.zip in that folder along with Android folder, busybox folder, clockworkmod folder, DCIM folder, downloads folder, etc etc....

slider2828 said:
Did you ever perform a backup with the ROM Manager? That usually creates a update.zip.....
Click to expand...
Click to collapse
i preformed a backup right before i did all this. i did notice the update.zip in there. i took it out and put in the update.zip you uploaded. do i need both in there?
thanks for the quick replies btw.

Nope... Try this... with ROM Manager,
Choose Flash ClockWorkMod Recovery and that will recreate the boot files for ROM Manager.... and also backup your current ROM again.
Then try the steps again.
OMG Dude I noticed you in oakland, I am in hayward/san leandro.... We can try after I get off work which is in 30 minutes. and then take 30 minutes to get back to SL....
You wanna meet at the starbux on marina?

Flashed and installed perfectly. Bumped my quadrant up to 2117. Good post, thanks.

OUTDATED[Guide] Setting up/using adb/fastboot-unlock, flash custom recovery & root

OUTDATED[Guide] Setting up/using adb/fastboot-unlock, flash custom recovery & root
Below is a great guide to rooting, from several sources, (mostly taken from pingvinen's "An Idiot's Guide to Flashing the Xoom" and a guide by publicanimal. and I hope it helps. You can find the links to all of the files referenced below in the Xoom Heaven thread (thanks StrifeSoldierVII!)[/I]
(New thread in General Section by Jack207407 will have all the updated links for flashing
http://forum.xda-developers.com/showthread.php?t=1443110
One Stop For ROM's, MOD's, and Root Wifi-Only and 3G/4G Models)
"What you need to do can be encompassed in these following short steps (will be detailed later on) in the following order. Each step is required before you can proceed to the next one. However, make sure that you are very very careful and don't try to take any shortcuts. That may soft-brick your device, and you may have a difficult time to explain that to your wife ... You have been warned.
HERE'S THE USUAL DISCLAIMER--I AM NOT RESPONSIBLE FOR ANY HARM THAT MAY COME TO YOUR DEVICE IF YOU FOLLOW ANY PART OF THIS GUIDE--ANY RISK IS ON THE USER!
I strongly recommend you to read the entire guide before trying. In fact, read it twice to ensure that you have understood everything. If there is weird stuff that you don't understand, don't hesitate to ask. The reason for me writing this down is that I like to document what I have learned. This is to me an excellent way to ensure that I will remember what I just did. Another reason was that I could not find a single thread that encompassed all steps required. There are many different threads, but no one (that I could find) that really guides you from start to goal. So enjoy and good luck!
I would like to thank LandMaster and cam30era for helping out with advice during my initial trail-and-error session. I soft-bricked my device once and had big problems to get by point 4.3 (avoid overwriting of CWM), but with their encouragement I finally succeeded.
Just a note before we begin: the different Xoom. Models that are able to use this guide are the following:
MZ600 - stingray_cdma - Motorola US 3g Xoom (technically this device is stingray as well, but I will be using stingray_cdma as the two devices have incompatible software)
MZ601 - utms_everest - Motorola EU 3g Xoom
MZ602 - stingray - Motorola US 4g Xoom
MZ604 - wingray - Motorola Wifi Xoom
(thanks solarnz!)
___________
Overview of the 6 required steps
1. Install Motorola USB drivers for your computers (for USB connectivity) 2. Install Java SDK and Android SDK tools (for adb and fastboot commands) 3. Unlock the device for flashing (allowing replacement of recovery and boot images) 4. Install a modified recovery image (ClockWorkMod recovery for Android) 5. Root the device (Allow r/w access to the device filesystem) 6. Flash a kernel that supports overclocking etc.
Steps 1, 2, 4, 5 and 6 require that you download install, image and zip files needed for the flashing.
All this was performed on a Windows PC. Windows 7, Mac and Linux users will probably have to do some steps differently.
1.0 Install the latest Motorola USB drivers
The installation file can be found at: http://developer.motorola.com/docstools/USB_Drivers/
1.1 Install the drivers and ensure that your Xoom is recognized by the computer
2.0 Installation of development software
Android SDK and Java SDK need to be installed. You can find the installation kits here.
http://developer.android.com/sdk/index.html In case you can't find fastboot.exe, look for it here (thanks to jerrycycle): http://forum.xda-developers.com/showpost.php?p=19546334&postcount=5
Update: you could also just install the adb fastboot pack here:http://www.android.net/forum/downloads.php?do=file&id=67
http://www.oracle.com/technetwork/java/javase/downloads/index.html
2.1 Install them as any other software, making an Android SDK folder on C/.
2.2 Make sure that all the files you need are in the Platform Tools folder (fastboot, recovery image file and so on). Copy any files in the Tools folder to the Platform Tools folder if necessary. Note: If the Android SDK complains that the Java Dev Kit can't be found, just press Back and then Next again. Wierd, but that seems to do the trick ... go figure.
(Warning: Never put any zip files in your Platform Tools folder. Flashing zip files through fastboot will cause very serious problems. Zip files must be flashed from the external micro SD card through CWM recovery on the Xoom...we'll get to that later.)
2.3 Test that ADB and FASTBOOT works. You should open a command window by right clicking in your Platform Tools folder where all of your files are, plug in your Xoom to your computer with your Motorola cable (it may not work with a generic cable) and write 'adb devices'. Your Xoom should now be listed. Did your device not show up? Make sure that you have USB debugging enabled in Settings/Applications/Development on your Xoom.
Optional: Those that want to be able to access adb from any where on their computer, here's a tip from scsa20: "For windows, if you go into System Properties and choose Advanced, then Environment Variables..., you'll be able to edit the Path variable under System variables, just add the path to where adb and fastboot is located (separated with a semi-colon ().
Here's what my Path variable looks like:
C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%Sy stemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\ System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\android-sdk-windows\tools;C:\android-sdk-windows\platform-tools;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\
It's long but do you see the android stuff there at the end?"
Update: xda poster Mandelbrot Benoit suggests an alternate adb setup, here: http://forum.xda-developers.com/showpost.php?p=18072572&postcount=50
If your windows computer doesn't see your Xoom, consider this (Originally Posted by AngryBulleteyeTruth):
When the xoom does not show up on PC it may be the problem of.... windows media player!
Xoom uses drivers of WMP to communicate with PC. If someone does not have the newest WMP drivers it will not show up and you can see xoom device in the devices tab on PC having an exclamation mark.
So the solution is to download and install Windows Media Player 11. It has worked for me.
--------
OK. Now that you are set up, it's Showtime! Take a deep breath...
3. Unlocking the device for flashing
This step will effectively erase the internal storage, including all your apps and settings. Use whatever backup you want to secure important data before you start. (It will also void your warranty, so you still have time to go back.)
3.1 Power up and start the Xoom.
3.2 Ensure that your device is fully recognized by the computer. A good sign is that the 'Portable device' dialog is activated on Windows when your Xoom has booted. The Xoom should also be seen in 'Computer'. If not, go back to step 2 and double check your USB drivers.
3.3 Use the command 'adb reboot bootloader' to go into Flash mode.
3.4 Use the command 'fastboot oem unlock'. This will trigger a dialog on your Xoom. Follow the instructions on the screen to complete the unlocking. I repeat, this *will* do a factory reset and all data will be lost!
3.5 Once unlocked, the Xoom will restart and work as normal. Don't bother to do any setup at this time, just make sure that USB debbuging is checked in settings, and now go on to step 4
4. Install recovery image (CWM) UPDATED 4/19/12
If you haven't done it already, download the recovery image file and save it to your computer in the Platform Tools folder.
(Download the recovery image from this link: http://forum.xda-developers.com/showthread.php?t=1604014 only the img file flashed through fastboot Remember, never try to flash a zip file through fastboot!)
Important: At this time, make sure you have a good (known to be working) microsd card in your sdcard slot in your Xoom. Reboot the Xoom with the sdcard in the slot to make sure it's mounted.
4.1 Boot into flash mode with 'adb reboot bootloader.'
4.2 Install your downloaded recovery image: 'fastboot flash recovery eos-recovery-r6.img' or whatever is the exact name of the recovery img file you are flashing.
4.3 Enter CWM recovery with the procedure below.
4.4 Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo section 4.
4.5 Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work (if you see Starting Fastboot Protocol), experiment with the timing (see below).
4.6 When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for getting this far!
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. Just repeat steps 4.1 through 4.6 if that happens.
UPDATE(12/28/11) Since putting this guide together, Motorola has issued a number of Over-the-Air (OTA) updates that have complicated the process of flashing the Clockawork Mod recovery, so if you have accepted any OTA updates, please read the following, which describes each step (http://forum.xda-developers.com/showthread.php?p=26009191#post26008083) (Thanks to Landorin.)
(If you have root and want to remove these files, remove or rename /system/etc/install-recovery.sh with something like root explorer. You can then flash your custom recovery through fastboot again.)
For those of you that get stuck with some error like 'device not recognized' poster Madjinj gives the following advice:
1) Be sure that you have your adb folder in the root of C drive directly and be sure that you are in adb folder in command prompt program (CMD in Windows machines) i.e by typing "cd c:\XXX" where XXX is the name of adb folder in your machine.
2) Be sure that you type "adb reboot bootloader" in comand prompt to activate adb program. if the problem persists, try typing "fastboot reboot" then after reboot type "adb reboot bootloader" in command prompt program.
3) Use the USB cable that came with your Xoom (some cables are not good in flashing for unknown reason..!!
4) make sure that you activate USB debugging mode.
5.0. Rooting the Xoom
The Universal Xoom Root zip file from solarnz is located here: http://forum.xda-developers.com/showthread.php?t=1242241
5.1 You need to transfer the Universal Xoom Root zip file to a working external micro SD card. You can do this on a computer or cell phone, but the Universal Xoom Root zip file must be located in the root directory of the micro SD card.
5.2 Insert the now prepared SD card in the Xoom.
5.3 Boot into recovery (as described in 4.3). Navigate using the volume buttons and press the power button to select the active option.
5.4 Select 'Install ZIP from sd card.'
5.5 Select 'Choose ZIP.'
5.6 Navigate to the ROOT zip file with the Volume buttons and select it with the Power button. Confirm that you want to install it.
5.7 Everything should indicate success, so back out to the main CWM menu and reboot the device.
5.8 From Android Market, install any app requiring root and start it. If the rooting was successful, then the app should request superuser permission and you should be able to grant it without any problems.
6. Flashing a new rom or kernel...(e.g. Tiamat Moray Rom and/or Odachi Kernel). Look in the Xoom Heaven thread or in the Development section of this form for all of these files.
6.1 This step is identical to 5, but swap out the ROOT zip for the ROM or KERNEL zip. For simplicity, you may want to prepare the micro SD card with both zip files at the same time in step 5.1..."
------------------------
This is still one of the best explanations of how to use adb and fastboot to unlock and root the Xoom and install a custom recovery, etc, and doesn't deserve to buries on back pages of this forum. Hopefully, the step-by-step nature of this guide will help those of you that have limited experience with this kind of tinkering.
Oh, and please feel free to correct any errors or omissions. As I said, it came from several sources and needed to somewhat updated.

Thank you, just bought my xoom yesterday and was confused on the steps to take!
This has made it as clear as possible for me and will follow your instructions to the letter tonight.
Sent from my MZ604 using xda premium

fastyan said:
Thank you, just bought my xoom yesterday and was confused on the steps to take!
This has made it as clear as possible for me and will follow your instructions to the letter tonight.
Sent from my MZ604 using xda premium
Click to expand...
Click to collapse
Good luck! Let us know how you make out and if anything needs to be clarified.

think im doing something wrong as unlocked fine but when i go to install the recovery file it keeps coming up cannot load? any ideas where im going wrong?
been at it 3 hours now lol and losing the will to live im sure its gona be something simples

fastyan said:
think im doing something wrong as unlocked fine but when i go to install the recovery file it keeps coming up cannot load? any ideas where im going wrong?
been at it 3 hours now lol and losing the will to live im sure its gona be something simples
Click to expand...
Click to collapse
Check to make sure that your file download is good, and that you are typing it's name correctly. Better yet, you could rename the file "recovery.img" and that will make it very easy to get it right.

On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium

fastyan said:
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium
Click to expand...
Click to collapse
When you're in the bootloader, you won't be able to access the SD Card or anything of that sort and adb won't work, in stead, when you're in the bootloader, you're switching over to fastboot. I'm sure if you type in fastboot devices you'll see your xoom listed.

Thank you for the reply and that's one thing sorted but any idea why its telling me "cannot load recovery"? I have tried renaming it and downloaded the recovery file 4 times incase that was wrong but still no joy :-(
I have done this all before on my phone and never had a problem so I must be missing something but f$*@ed if I know what?
Thanks again for your help though.
Sent from my Desire HD using xda premium

Just had a thought. Could it be that the XOOM hasn't actually unlocked, would that cause it to not load? Is there any way to check if its unlocked successfully? Although I did try it twice before?
Sent from my MZ604 using xda premium

Once you got it in the bootloader, you gotta make sure you do fastboot oem unlock, press volume down then up, press volume down again then up again, and let it format and reboot.
If it's already unlocked, you'd get a message telling you so (generally).
Then when you go to flash the recovery, make sure that the recovery image is in the folder where fastboot is and type in fastboot flash recovery recovery.img (if I remember the syntax that is, I'm at work and don't feel like scrolling up or going into the root guide to confirm xD ).

fastyan said:
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium[/QUOTE
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
Click to expand...
Click to collapse

okantomi said:
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote.Oof course the cwm recovery img.. goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
Click to expand...
Click to collapse
With the way I have my system setup, I can run adb and fastboot wherever I am

No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
No progress yet as im at work but when I get home I will start the process from scratch again and see how I get on and will keep you posted.

scsa20 said:
With the way I have my system setup, I can run adb and fastboot wherever I am
Click to expand...
Click to collapse
Care to share???
That would be helpful to many, I'm sure. We could add it to the guide, along with anything else you can think of.

fastyan said:
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
No progress yet as im at work but when I get home I will start the process from scratch again and see how I get on and will keep you posted.
Click to expand...
Click to collapse
If, as you follow this guide, you find any explanations that are not clear or if you think of a step to take or something else that might improve the guide, please post it and we can add it in. It's been almost 6 months since I've unlocked and at least a couple of months since I've had to use adb, so I'm sure I've forgotten some things. Those of you whose experience is fresh can give really good advice. That's how this guide was originally written, by pingvinen, right after he had gone through a grueling rooting process.

okantomi said:
Care to share???
That would be helpful to many, I'm sure. We could add it to the guide, along with anything else you can think of.
Click to expand...
Click to collapse
For windows, if you go into System Properties and choose Advanced, then Environment Variables..., you'll be able to edit the Path variable under System variables, just add the path to where adb and fastboot is located (separated with a semi-colon (;)).
Here's what my Path variable looks like:
C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\android-sdk-windows\tools;C:\android-sdk-windows\platform-tools;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\
Click to expand...
Click to collapse
It's long but hey, see where the android stuff is near the end?

@Okantomi:
We all have learned some things from trial & error (eg.the sk cannot detect java dev kit)
i could only flash recovery after renaming it to recovery(do not forget to add.img in cmd while flashing).also the official motorola name recovery as same.
after downloading sdk and updating to platform tools i have kept a zip in safe location so that i do not need to download again platform tools if i install sdk fresh
initially knowledge was scattered now it is at one place.
right now testing steady hawkin's kernel and new recovery
btw good signature pic.

Ok so another night has gone and still can't get recovery on!! Tried re unlocking the XOOM and every time it comes up with "cannot load recovery.img" I tried installing everything on my laptop and went right from the start and getting exactly the same thing!
Starting to think im never gonna get this sorted now :-( just feels like the XOOM isn't unlocking? Every time I go through the unlocking process it never states that its already unlocked? Is there any way I can check that it is unlocked?
Please help im losing the will to live now lol
Sent from my MZ604 using xda premium

I would say to send it to me and I can take a wack at it but I don't think you want to wait that long to simply root it.
Let me ask you, are you getting any sort of error messages when you do fastboot flash recovery recovery.img? If so, what's that error message?

scsa20 said:
I would say to send it to me and I can take a wack at it but I don't think you want to wait that long to simply root it.
Let me ask you, are you getting any sort of error messages when you do fastboot flash recovery recovery.img? If so, what's that error message?
Click to expand...
Click to collapse
Not getting any error message it just says "cannot load recovery.img"
I have tried with and without the .img and always the same?
Tried going through the whole process again on my laptop incase I had missed something but exactly the same.
When I unlock it I follow the onscreen instructions and at the end it says its complete before it reboots. Then I turn on usb debugging again and reboot bootloader all ok but won't let me load the new recovery?
Normally I would just say it wasn't meant to be and leave as it is but I wont be beaten on this so I'm purposely not installing anything on it till its done. Any ideas apart from bringing it round yours lol ;-)
Sent from my Desire HD using xda premium

[ANDROID] ClockworkMod Permanent Installation Fix! - Step by Step Instructions

I have figured out a way to permanently install ClockworkMod Recovey on your hybrid WebOS/CyanogenMod Touchpad. Like many of you, my ClockworkMod installation failed when I tried to install using ACMEInstaller while I also installed CyanogenMod.
I realize there is now a workaround to "inject" ClockworkMod into your TP using novacom however this requires you to utilize a computer everytime you want to boot ClockworkMod. Follow the instructions below to install ClockworkMod onto your TP permanently and free yourself from your PC!
1. Boot into WebOS
2. Mount TP to your computer and create a "cminstall" folder if it no longer exists after your CyanogenMod installation
3. Copy the "update-cwm_tenderloin-1012.zip" file into the "cminstall" directory, then unmount TP from computer
4. Download the "Internalz Pro" program using the "Preware" application in WebOS if you haven't already (Google is your friend if you get stuck here)
5. Open "Internalz Pro" and navigate to the "boot" menu (will most likely require you to tap the top-most icon of a folder with two dots next to it to get to the root of the TP - should be second folder down)
6. Tap on the file "uImage.ClockworkMod" and select "move"
7. Navigate to the "media/internal/" directory and click "select" to move file
8. Now tap on the file "update-uimage" and move the file to the same "internal" directory you did in step #7
9. Exit from "Internalz Pro" and reboot device while holding down the up volume key, which will take you in to WebOS Recovery (or select WebOS Recovery when you get to the moboot screen you may have previously installed) - you should now see a large USB icon and should be connected to your computer using a usb cable
10. Go to your command prompt in Windows and navigate to the menu where you have novacom installed - you should also have the ACMEInstaller binary file copied into this directory by now (If you don't know what I'm talking about, remember Google is your friend)
11. Type in "novacom boot mem:// < ACMEInstaller" in the command line and press enter
12. You should now see ClockworkMod recovery installing on your TP - Once it reboots into moboot select "boot ClockworkMod" and watch it boot into ClockworkMod!
13. After celebrating, boot back into WebOS, go into "Internalz Pro" and move the file "update-uimage" back into the "boot" directory - the "uImage.ClockworkMod" file that you put in the "Internal" directory is no longer needed since you reinstalled ClockworkMod properly
Essentially the boot directory was overloaded which caused for insufficient space when installing ClockworkMod. Now you should be able to boot into WebOS, CyanogenMod, WebOS, AND ClockworkMod Recovery without a computer. As always, I do not take responsibility for you bricking your TP or variability you may have... use this information if it is helpful but don't blame me if something goes wrong. I'm just trying to help out the community that has helped me for so long.
Let me know if this is helpful to you. Thanks!
dseelye

What!?
Hi!
firstly, thank you for making this guide, i know that alot of people like myself will appreciate it.
but i've run into a problem, see, now i don't have the option to boot into cyanogenmod anymore !
can i flash it in clockworkmod, or do i have to do it all over again?
a reply would be appreciated

you most likely copied the wrong file from the boot folder, as there was one for clockworkmod and one for cyanogen mod... look and see if you incorrectly copied the cyanogenmod "uImage.CyanogenMod" to your internal sd card to free up space. You will have to move this back to the boot folder and grab the other one.

Thank you VERY much!
and thanks for the INCREDIBLY quick reply!
EDIT: IT WORKED!!! YOU'RE THE MAN!!!!!

No problem... let me know if that solved your concern...thx
EDIT: Oh, just saw the edit of your post...great, glad that was it!

Just wondering... how permanent is permanent?
For instance, if I use "web doctor" to restore my touchpad, will the recovery be overwritten?

Yes, I just mean that you don't have to "inject" clockworkmod into your TP using your computer which was the workaround for the people who couldn't get it installed originally during the CyanogenMod installation. This just installs it properly but can be wiped with WebOS Doctor like anything else...

bigblueshock said:
Just wondering... how permanent is permanent?
For instance, if I use "web doctor" to restore my touchpad, will the recovery be overwritten?
Click to expand...
Click to collapse
Yeap... it will not delete a single bit of CM7, just gonna restore the original bootloaders, delete moboot and skip CWM /Android on boot...
Running again ACME with only moboot and CWM in the cminstall folder will restore them.
....After WebOS doctor... it will show CM7 as the last time you shut it down.
Sent from my GT-I9000 using XDA App

I followed directions exactly but I am not seeing the uImage.clockwork in the boot folder. Any suggestions? I see that file in the cminstall folder, do I just leave in there or should I copy directly to media\internal?
Sent from my SPH-D710 using xda premium

The "uImage.ClockworkMod" may not be in the boot directory I suppose if the previous install attempts didn't put it there so not sure why it isn't in yours. Essentially you are just trying to move some of the larger files out of that directory so you can install ClockworkMod properly as the space constraint of the partition size seems to be the issue. The other file I mentioned, "update-uimage", is actually the largest one I found and you may be able to do the ClockworkMod install properly by only removing that one temporarily. Let us know if you are able to resolve.

I've installed clockworkmod recovery with no errors on the first try, is it advisable that I need to use this method?

I was installing cwm for the first time. I didn't include it originally with the install of cyanogen mod, I guess that's why it wasn't in the boot folder. I placed both files in the media\internal directory and also inside the cminstall folder and ran the command and it worked fine. When I checked internalz pro to remove the files, the cminstall folder and uimage files were gone already. So it looks like I am good to go. cwm is working, I flashed gapps from it. Thanks for reply.
Now I just need to figure out how to make phone calls.
Sent from my SPH-D710 using xda premium

If you installed ClockworkMod completely the first time and it works, then you definitely don't need to do this as this thread was intended for those that tried to install it at the same time as when they installed CyanogenMod and ClockworkMod Recovery didn't install properly. These instructions are to outline how to get it installed correctly as just trying again using ACMEInstaller wasn't working for anyone due to the small size left in the boot directory.

hey thanks for the fix but after the fix i cant get into the market

Not sure why you can't access the market...no issues here. I would suggest reinstalling the gapps zip file and possible the market fix file that are out there now that you have clockworkmod working properly.

thanks for the help thats what i had to do

Hi, the "move" option isn't available, only "copy" "info" and "open"
The entire directory is "view-only"

Not sure why "move" isn't available for you... its been a while since I installed Preware and Internalz Pro so I must have gotten root access somehow and that's why it shows up for me and others. I'd suggest searching for how to obtain root access to WebOS to find your answer... possibly development mode if you haven't already done that but I thought that was required to get Preware installed in the first place.

Move command
dseelye said:
Not sure why "move" isn't available for you... its been a while since I installed Preware and Internalz Pro so I must have gotten root access somehow and that's why it shows up for me and others. I'd suggest searching for how to obtain root access to WebOS to find your answer... possibly development mode if you haven't already done that but I thought that was required to get Preware installed in the first place.
Click to expand...
Click to collapse
I have the same problem. Move/delete commands are available on the media/internals but on boot folder move is not available.

Thanks
Awesome man! Been struggling with this since two days. Thanks a lot for the fix and step by step instructions
---------- Post added at 09:07 AM ---------- Previous post was at 09:00 AM ----------
tmkhan said:
I have the same problem. Move/delete commands are available on the media/internals but on boot folder move is not available.
Click to expand...
Click to collapse
After Opening "Internalz Pro", Open "Preferences", scroll down to the bottom. You will see an option called "Master mode". Turn it on. You will get read/write access to the boot folder.

[USER Tips] HD/HD+ Stock Root User Tips from LeapinLar

When I originally bought the Nook HD+, I made several futile attempts to get ADB working so I could sideload apps to it. I was so frustrated that I was ready to give up and return it. But I finally got it going and with the help of a few smart users here was able to get it rooted and installing apps directly on the device. So, to save some other users the same frustration I had, I thought I would outline what I did to make this device hum.
Update 12/27/2012: A lot has changed since I first created this tips thread. I am updating it to the latest information. Most of the steps below are not necessary anymore since I now have a new thread here which lets you do these things easily with a special version of ClockworkMod (CWM) recovery for the HD and HDplus. And the text here has been modified to reflect that and include the HD.
Update 11/02/2013: Since B&N has included the gapps and Play Store in version 2.1.0 and above and since verygreen developed the new boot.img that removes B&N /system file protection scheme and I updated my HD/HD+ CWM thread to account for those changes, I decided to give this thread an update. I have added comments to the sections in italics below where necessary
If you have questions or comments on this post, reply to this thread. Please do not send me private messages or emails. By posting in the forums others get a chance to help you and if I answer your question in the forum, others can see my response and it may help them too.
1. Setting up ADB
ADB is very useful for many things but you do NOT need ADB to root anymore. Look at my thread referenced above to use CWM to root.
Also, rather than use ADB via USB, it is much easier to use a Wireless ADB app available in the Play Store.
If you want to know how to set up ADB with USB, click on the "show content" button below.
The first thing you need to do is get ADB working on your PC so that it can connect with the HD+. The instructions to do that is on B&N's own site here. (But you really don't have to do all that, see below). To make it easier for XDA users, I have attached to this post the drivers downloaded from B&N site. Download and unzip that file to your PC.
To install the drivers, do the following (I tested this on Windows XP and Windows 7):
1. On your HD+ go to settings, device information, developer options, and make sure check "Enable ADB" is not checked.
2. Plug in the device to the PC with the USB cable. MTP should install.
3. Unplug the device, go to settings again and check 'Enable ADB'. Plug back in.
4. New devices will try to install. When they do, work your way through the options until you get to the choice "include this location in search" (the terminology is a little different in Win7) and browse to the location you unzipped the driver files above. Continue and the driver should install. In Windows 7 just one device will pop up. On Windows XP, two may. (Edit: If you are having trouble with this step, go to the B&N link I have above and read and follow section 4.6 of that guide. You can skip section 4.6.2 since you unzipped those drivers earlier. But do all of the remaining steps in section 4.6).
5. An "Android Composite ADB Interface" will install. If the computer says it needs to reboot to finish. Do it.
6. If, when it starts back up, and after installing ADB below, it does not work, you may need to go the Device Manager and look to see if "Android Composite ADB Interface" device has a yellow exclamation point by it. If it does, update the driver with the B&N driver again.
7. Create a file named adb_usb.ini and put 0x2080 in it with no line feed or carriage return. Go to \documents and settings\ and open your users folder and create a folder named .android and put that file in it.
8. I have attached a file named adb.rar below. Just unrar the adb.rar file. There will be three files there that you can put in a directory (any name you want).
9. Open a command prompt and cd to wherever you copied those adb files. If you set your path to that directory, you can have the prompt set for any directory, like where your apks are stored. Type 'adb devices'. It should go through some commands ending with a list of devices connected. The serial number of your HD+ should be listed. You can now run ADB commands.
2. Sideloading Apps
Once Unknown Sources is activated by my CWM zip above, you do not really need to install apps this way anymore.
Once you have ADB connected to your HD/HD+, it is very easy to sideload install apps. Just have your command prompt set to the location that you have your apk's stored and type "adb install xxx.apk", where xxx.apk is the name of your app. It is best to name the apk to something simple with no underlines or special characters in the name. It does not matter what you name it, the real name is inside the apk. The app should install. I would start with a launcher app since sideloaded apps cannot be seen in the stock launcher. Then I would install AnyCut which I have attached to this post. This app allows you to put the Home command on your launcher's home screen so that after you make your launcher default, you can get back to the B&N home page. There is a trick mentioned in the B&N guide referenced above that lets the stock app drawer see your sideloaded apps. On the Apps screen, hold the volume up button while you press the "Apps" word at the top of the screen for 2-3 seconds. An "Extras" screen will pop up showing all of the sideloaded apps. You have to do this every time you want to see it.
3. Rooting the HD/HD+
Rooting is now very easy using CWM in the referenced thread above. If you want to use the older manual method, click on the "show content" button below. But be warned these older methods no longer work on version 2.0.5 or newer.
Verygreen came up with the original scheme to root the HD+. But it had a problem. The HD+ checks on boot to see if /system has changed, and if it has, it will not boot. It tries this 8 times and on the last time the "8 failed boot" procedure kicks in and your device is wiped clean (including your storage space) and the factory ROM is re-installed. He later modified it to survive a reboot. Someone0 developed another scheme where he can root without modifying /system directly. So the next time it boots, it boots normally. See his thread here.
ONCE YOU HAVE ROOT, DO NOTHING THAT MODIFIES /SYSTEM OR IT WILL NOT BOOT AND END UP RESETING ITSELF. Also do not install anything that installs to /system, like busybox, AdFree and a few other apps. Ignore this warning with Universal Root rev3 or higher.
4. Setting OTA (Over the Air) Updates from B&N to Manual
When you first register the HD/HD+ it will automatically update itself to the latest version. To protect yourself against further updates that might jeopardize your ability to root or add other mods, you should try to block further automatic updates. But it seems that making this mod is no longer effective, B&N updates anyway.
Again, I have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below.
EDIT: (2/22/13) I have a new way to block OTA that seems to work so far. Another user (thanks greenya!) discovered this and I have come up with a way to implement it. I use the app AdAway to put my own black list of sites to not allow access to. If you want to try this, you must be rooted. Get AdAway either on the 1mobile.com market or at its developer's site (http://code.google.com/p/ad-away/). Before you do anything go to its preferences and change the target hosts file to /data/data/hosts. That way it will not reset the device. Then go to "Your Lists". Add this site to the black list: su.barnesandnoble.com. Then go to the main menu and select "Download files and apply ad blocking". It will ask you if you want to add a symlink, say yes. (If you installed the new boot.img from verygreen or flashed my latest version of Universal Root (rev3 or higher), you do not need to worry about adaway resetting your device. Just install it normally.)
It does not seem to block any B&N shopping or downloading apps or books. I installed this on my 2.0.5 and purposely tried to update and it says it needs the update but pushing download does nothing. Then I unblocked it and pushed download and it started to download immediately. So it does work.
Basically the same method used on the Nook Color and Nook Tablet should work on the HD+. It requires that you edit a database file and that requires root access. I use the paid Speed Software's SQLite Editor. You need to use the latest version (2.0.1). I could not get my older version to get root access.
So here is a description on how to do it with SQLite Editor. Open the app and it should get granted superuser access. Then browse with it to /data/data/com.bn.devicemanager/databases. There should be a file there named "devicemanager.db". Open that with SQLite Editor. There should be a list down the left side, one being "registry". Click on that. A table opens up that looks like a spread sheet. On line 6 is com.bn.device.fota.mode. Scroll across till you see the value column. It should say auto. Edit that to manual. Save the database and you are done.
This worked on the other Nooks, so should work here. See the post below for another automatic method.
5. Setting Up Installing from Unknown Sources
I also have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below.
You can toggle the unknown sources using the same method as I used for blocking OTA. Just look for the database in /data/data/com.android.providers.settings/databases. The database is settings.db. Open secure and line 4 - install_non_market_apps and change the value to 1.
6. Setting up Google Play Store and Google Apps
I also have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below. If you have stock version 2.1.0 or higher you do not need to flash my zip. Play store is included in the ROM.
Someone0 has a post on how to add Google Play Store is here. And he now has it so you can install the entire Gapps package, including Play Store. Again, you must be rooted first.
7. Setting LCD Density
If you are like me, you hate the tiny fonts on these high resolution devices. You can change the default lcd density to help with that. The default lcd density for the HD/HD+ is 240. I changed it to 300 and everything works fine on the HD+ and fonts are a little larger. But you cannot modify build.prop on /system to do that. It will cause the device to reset itself since you are modifying /system. To get around that, create a file in /data named local.prop. Add the following line to that text file:
qemu.sf.lcd_density=300
Then reboot and your new density is set. You need to be rooted to do this on the device.
I found that changing the density on the HD made the SystemUI app crash. If you want larger fonts for the HD, I recommend you use the tip in the next section.
8. Larger System Fonts
If you don't want to set your LCD density higher but you still want larger fonts, a user (Windsor1959) just passed on this tip. Go to the B&N app store and install the free app Go Read. Once that is installed, open it and use the menu to go to accessibility settings. There is an option for larger system fonts. It works great. Thanks Windsor1959.
I also just discovered that there is another hidden setting that lets you set the system fonts from small, normal, large and huge. To get to these settings you need a third party launcher like zeam or adw and the AnyCut app I attached below. On the launcher screen long press and select shortcut. Select AnyCut from the list. Within AnyCut select activity and scroll down to fonts. Select that and a fonts shortcut will appear on the launcher screen. Open that and you can select the font size.
9. Data structures on the HD/HD+
For those of you used to having two separate partitions for data and media files, B&N has used a different scheme for the HD/HD+. They make one very large /data partition ranging from 5GB to 28GB depending on which device you have. Then they create a folder in /data (/data/media) and, using the sdcard fuse feature, link it permanently to /sdcard. So that means it is one big dynamic space for both /data and /sdcard, sharing the free space. /data is considered root and /sdcard is not.
They named it /sdcard because a lot of third party apps expect there to be an sdcard on the system and won't run unless there is one. That creates a little bit of a terminology problem for us Nook Color users. We are used to having /sdcard be an external SD. And on top of that, if we do add an external SD, it is mounted as /ext_sdcard under /mnt and that is hard for some apps to see. And when you connect your device to your PC with MTP, internal media (sdcard) is called 'internal memory' and the SD (ext_sdcard) is called 'SD card'. I think B&N did this with the expectation that users would not be rooted and be able to see that stuff under the hood.
Since sdcard is really just a part of /data, it is formatted as ext4 instead of FAT32 like the Nook Color media partition was. That means you can store a single file larger than 4GB, which is the limit for FAT32. Most external SD cards are formatted FAT32 so they are also limited to a single file size of 4GB. But it makes them directly readable by your Windows based PC. When you first put a new external SD in the HD/HD+, it asks you if you want to reformat it so you can more easily store your media files. If you say yes, it will format it to ExFAT, a new flash drive format that supports larger file sizes. That's good for your media files since you can have very large files on it. But it could be bad if you want to take the card out and put it in your Windows XP PC because XP cannot read it without an update patch from Microsoft. If you have Vista or higher, ExFAT can be read natively.
When you do a factory reset (clear /data) your media directory (/sdcard) is wiped out too.
Also, the B&N media, books, magazines, etc., are stored in /data/nookmedia, which is root.
10. White on White Text for Some Apps
One of the annoying issues with using some third party apps is the HD/HD+ displays some dialogue boxes with white text on a white background so that the text is unreadable. Someone0 and I developed a patch that can repair this. I have a zip in my CWM thread referenced above to repair the HD+ and HD. (Also since stock version 2.1.0, B&N has dramatically changed the color scheme so that the white-on-white issue is no longer the problem it used to be, I have discontinued providing white-on-white mods for version 2.1.0 and above.) If you want to see how to do it manually, click on the "show content" button below.
Someone0 and I have been working on this and have found a solution. It requires a modification to the framework-res.apk on /system. And the mod works very well. The problem is that the apk is on /system and must be symlinked using our symlink trick we use on /system files when we need to modify them. That is easy to do, but this particular apk is very critical to your system. If you do not get it installed properly, it will lock up the device and you either need to reset it completely or repair with ADB.
If you are tech savvy enough you could modify your own apk and install it. In the colors.xml file in the values section of the de-compiled apk, are two settings that need to be changed, "background_light" and "background_holo_light" need to be changed to "ffcfcfcf". The color choice was a compromise between making the text dark enough to be seen against a white background and bright enough to make things like menus show in the grey backgrounds. Re-compile and put the apk in /data, delete the apk in /system and symlink to the one in /data. The problem with doing it manually while running is as soon as you delete the apk, things go bonkers. And you cannot add the new symlink until the original apk is deleted. If you start messing with this mod, be sure to have ADB enabled so if it locks up and gets stuck on booting, you can access things with ADB and hopefully repair it. When I did my system manually, I copied the modded apk to /data with root explorer, used root explorer to set /system to read/write, then used ADB to delete the apk in /system and create the symlink. If you mess up, it will boot, but get stuck at the 99% level. Hopefully if you left ADB enabled, you can use ADB to repair whatever is wrong.
11. Implementing Userinit.d
Userinit.d can be used to run specialized scripts as part of the boot process. The HD/HD+ does not implement userinit.d, but it can be modified to allow it. And these scripts can be used to customize the performance of the device, like modify fonts, change colors, add symbolic links, modify drives, set CPU speeds and tweaks, etc.
I have implemented userinit.d in the new Universal Root zip in my referenced CWM thread above. (The latest version no longer uses it).
The scripts are usually named with numbers at the beginning and no extension. Examples would be the scripts from CM7 init.d which are: 00banner, 01sysctl, 03firstboot, 05mountsd and others. They are executed in the order of the numbers. They are plain text files that have as the first line:
#!/system/bin/sh
Then they have script commands in text format.
The beauty of these scripts on the HD/HD+ is you put them in /data instead of /system which would reset your device. Put the script files in a new folder named /data/local/userinit.d. Set the script file permissions to execute.
There are examples of userinit.d scripts out there if you search for init.d scripts on XDA or the web. Some will work on the HD/HD+ and some won't. I have a great example in the next section.
12. Swapping "sdcard" and "ext_sdcard"
I now also have this modification as a flashable zip in my CWM thread linked above. No need for root with that one.
As explained in section 9 above, the internal media is named "sdcard" so that apps can store their files there. Some users would like them stored on their external SD. I have a userinit script that will swap "sdcard" and "ext_sdcard" so that apps will store their files on the external SD. The external SD will show as "sdcard" and the internal media will show as "ext_sdcard". And it shows swapped using MTP also. It can be a little confusing since we cannot control the names, but they are swapped. If you don't have an external SD plugged in, both sdcard and ext_sdcard will show the internal media.
To swap the drives, make sure userint.d is implemented, then download the attached file, 11SDswap.rar, and extract it and put the file in /data/local/userinit.d. Set the permissions of the file to execute in all three boxes. On the next reboot, they will be swapped. To return to normal, just remove the file and reboot.
13. Skipping OOBE (Out of Box Experience)
Skipping OOBE is when you want to skip the registration step when you first start your device or after a reset. Not registering means that you will not be able to buy books or apps from B&N or, if you already have an account, have access to already purchased items. Your name will show as TEST (which can't be changed). And, if you set up wifi, the device will still check for updates and if found, update.
So if you don't want to register, or that device is already registered to someone else and you can't, just skip OOBE. There are instructions for the Nook Color here. They still work for the HD/HD+.
14. Back Up Your Stock ROM Installation with CWM v6.0.2.8 for Nook HDplus and v6.0.2.7 for the HD
Now you can backup your stock installation with my bootable CWM (ClockworkMod) recovery SDs. That way you can restore if you make a mistake and change /system so the device starts to reset itself. Just catch it before the reset completes, insert the card and restore and you will be back to OK.
You can do anything with these CWM SDs you normally would do with CWM, (nandroid backup, wipe system, data, cache, dalvik-cache, fix permissions, etc).
One of the nice features is you can wipe /data without it wiping your internal media at /data/media. So, if you want to reset, just wipe /data and your media files are still left intact. And when you do a nandroid backup, it can be placed either on internal media or your external card. The nandroid backup feature backs up /boot, /system, /cache and /data (without the media folder). So if you want the media folder backed up you must do it manually from within stock. And when you restore, you can selectively restore any partition. So if you mess up /system by putting something there that causes a reset, just selectively restore /system.
EDIT (5/22/13) - There is a new procedure brought to my attention by another user (thanks fanoush) which lets you make the CWM SD without burning the image. It seems the OMAP4 devices are a little more liberal on the booting requirements than previous OMAP devices. This makes it easier to install on any size SD. Go to my HD/HD+ CWM thread linked in my signature and look at item 1a. There are instructions and files there.
The versions attached below are under 120 MB so they can be put on any size SD. It burns very quickly. But there is no room there for any backups. After burning the SD you can use partitioning software (like Mini-Tool Partition Wizard or EaseUS Partition Manager, both free) to expand it to the full size of your SD card if you want so there would be plenty of room for backups. But be sure to only expand the back end of the partition, being careful not to touch the beginning.
I also now have a 4GB versions for both the HD and HDplus attached to the CWM thread referenced above.
To make the SD, download the version for your device and extract the file. It should be a 120MB .img file. Burn (write) that image file to your SD card using Win32diskimager in Windows. In Linux or OSX (Mac) use the "dd" command.
To use Win32DiskImager, find it on the web (here, it's free) and install it on your Windows PC. Open it (be sure to run it as administrator) and select the drive (device) that has your card reader with your SD inserted. Then in the image file box put the location where you have the extracted img file. Then when everything is set right, click on the write button. A warning will pop up asking if you want to proceed. When you have verified that you are going to write to the correct device, click on Yes. (One user overwrote their external USB hard drive by not verifying first). With the small version it should burn fairly rapidly. If you get an error message about access denied, it means you are looking at the drive with Windows Explorer. Close Windows Explorer and try again. In fact, it is a good idea to close all unnecessary windows when burning, even your browser.
Insert the SD into your powered off Nook HD/HD+ and power on. It should boot to CWM with the label v6.0.2.8 for HD+ stock. The HD version just says v6.0.2.7 for Stock. You can tell it is booting properly if the cyanoboot logo shows up after the Nook logo shows for a few seconds. If the Nook logo stays there and starts changing, it means it is booting to stock. Hard power off by holding the power button for several seconds. Try again.
Manipulate the controls with volume up/down for cursor, n key to activate and power key for back.
15. Modifying System Files on the HD/HD+
Ordinarily you cannot modify system files on these devices because they will detect the change and reset themselves back to factory stock, wiping out all your data at the same time. But there is a safe way to do it if you are rooted.
If you have installed my new Universal Root rev3 or higher or installed verygreen's boot.img, the below procedure is no longer necessary, just modify the files directly.
The HD/HD+ has a manifest file included in the boot files that has a listing of each file that is supposed to be in /system and a checksum of each file. On boot, it reads the files in /system and makes sure each file that is there is on the list and matches the checksum. It ignores directories, symlinks and missing files. If one is added or has the wrong checksum, it stops and tries to boot again. If it reboots 8 times in a row without completing the boot, the automatic reset feature kicks in and your device is formatted and the factory ROM is reinstalled.
So you can see that missing files are OK and symlinks are OK. So if you want to modify a system file, first copy it to /data somewhere, delete the original, and make a symlink in /system to replace the deleted file. The symlink points to the file copied to /data. But be careful, some files, like framework-res.apk, are being used all the time and if you delete it, even temporarily, the system goes crazy.
The scheme that someone0 and I use is to mimic /system under /data/su so that the structures are the same to avoid confusion. For example, if you wanted to modify build.prop, it would be copied to /data/su/system/build.prop and the symlink would point there. Since build.prop is not used very often, it is safe to now modify it however you want. But be careful, some settings there are vital, like hardware rotation. Mess with that and things will go all wonky on the next reboot.
Here are the specific commands to make this happen using build.prop as an example:
1. Use your root file manager to copy /system/build.prop to /data/su/system/build.prop. Set the file's permissions to match the original.
2. Delete /system/build.prop also using your root file manager
3. Set up Terminal Emulator. Start the program and type su enter. After you allow superuser access, the prompt turns to #
4. Type the following command at the # prompt (without the quotes):
"mount -o remount,rw /system"
5. Then this command:
"ln -s /data/su/system/build.prop /system/build.prop"
(That first letter is a lower case L)
6. Then this command:
"mount -o remount,ro /system"
You are done. You can now modify build.prop in /data any way you want and the system will not reset.
But before you do this mod or any other system file mod, I recommend you have backed up your system using CWM as described in the previous section. That way if you did not get it right somehow and it starts to reset, you can insert your CWM card to stop the rebooting and selectively restore /system and try again.
One side benefit of doing this build.prop mod is if B&N tries to update you in the future, it will fail because it cannot verify your build.prop because it is missing. And, in my experience, it does not try again.
16. Nook HD/HD+ internal partition structure and backups
The partition structure for the HD/HD+ is the same and is as follows:
Code:
P# Name Size Type
1 xloader 128K Fastboot Image
2 bootloader 256K Fastboot Image
3 recovery 15MB Fastboot Image
4 boot 16MB Fastboot Image
5 rom 48MB vfat
6 bootdata 48MB vfat
7 factory 448MB ext4
8 system 672MB ext4
9 cache 464MB ext4
10 data varies ext4
There is a simple process to make image backups of your internal partitions. Most people will never have to use the backups, but there is one critical partition that holds vital device specific information that was created at manufacture that is probably wise for you to back up. The process requires that you have either Terminal Emulator installed or ADB set up. And it can be done either in rooted stock or CM10/CM10.1. In Terminal Emulator or ADB Shell in superuser mode, type the following command:
dd if=/dev/block/mmcblk0p7 of=/mnt/sdcard/factory.img
This will make an image of your partition 7 that has that vital information. It also has a copy of the factory.zip file used to reset your device should you need to. If you want to back up the rest of your partitions, just change the p# and file name in the above commands to match the listing above. Partition 10 is quite large so should not be backed up using this method.
To restore a partition, just reverse the information following the if= and of= statements in the command. The information stored in partitions 1, 2, 3, 4, and 8 is specific to the ROM version you were running when you made the backup, so restoring them to another version is probably not a good idea (and if you do, restore all 5 of them together). Only do it if it is a last resort. And of course you should not restore HD partitions to the HD+ and vice versa.

Enable Unknown Sources and Blocking Auto OTA made easy (updated 12/3)
Instead of making a new thread, I have decide to make the tips that already available, but hard to use and make it simple.
So, what is it? This little thing will set Enable install from Unknown Sources and change the auto update to manual update for Nook HD ROM. I keep hearing how people are saying they have hard time making these changes so, I make it pretty dead simple. It's as simple as I can make. If you are looking at the timeline, root first, then this, and then gapps after. I now make them all so simple that it take me like 15mins to do all those 3 things from scratch. Originally I grab the sqlite3 from one of the app, which I guess I shouldn't have. Now I replace it w/ the one from CM9, which I guess is okay. And smaller size too.
If you were using verygreen version of root, try running this first.
Code:
adb shell su -c "/data/su/busybox chown shell.shell /data/su"
Pre-Requisite:
ADB and root.
NEW Instruction:
download the settings_new.zip in the attachment and save it somewhere.
unzip it.
run install.bat (for windows)
OLD Instructions:
download the settings_old.zip in the attachment and save it somewhere.
unzip it.
run install.bat (it basically just upload settings.sh and sqlite3 and change their permission, if you are on linux just do that instead)
adb shell
su
/data/su/settings.sh
*** OLD TEXT ***
While it's true that we should put heavy emphasis on not touching /system and that is not just manual works, but also any app with root access. You could be installing something like busybox via goole play store and screw everything up. That said, we are not touching /system at the moment because we lack the knowledge of that the nook is doing during boot process. I have been able to get asomething like AdAway to work which actually creating a sym link from /system/etc/hosts to /data/data/hosts file. I been doing this under the assumption that mounting and sym link are ok in the /system. But I would be worried too if there is a lot of those.
Click to expand...
Click to collapse

Lost and Confused
I tried following the instructions on the B&N’s website, but I do not see ‘Android Composite ADB Interface’ or even ‘Android Phone’ within the Device Manager of Windows. I now have ‘BNTV600’ and ‘NOOK’ under Device Manager/Portable Devices. I think this is for the big leagues and I may mess something up. Probably going to wait until there is a YouTube video guide showing step by step on how to successfully root the Nook HD+.
Many thanks to ‘leapinlar’ for the help.

cybersonic_ca said:
I tried following the instructions on the B&N’s website, but I do not see ‘Android Composite ADB Interface’ or even ‘Android Phone’ within the Device Manager of Windows. I now have ‘BNTV600’ and ‘NOOK’ under Device Manager/Portable Devices. I think this is for the big leagues and I may mess something up. Probably going to wait until there is a YouTube video guide showing step by step on how to successfully root the Nook HD+.
Many thanks to ‘leapinlar’ for the help.
Click to expand...
Click to collapse
If you read my description above, it says to update the driver for BNTV600.

No longer able to access internal & external memory on the Nook
leapinlar said:
If you read my description above, it says to update the driver for BNTV600.
Click to expand...
Click to collapse
This is what I did:
1. Plugged my Nook HD+ to my computer (ADB enabled)
2. Device Manager / BNTV600 / Update Driver Software / Browse my computer for driver software / Usb_driver_r04-windows folder / OK
3. Clicked on ‘Let me pick from a list of device drivers on my computer’
4. MTP USB Device appeared so I clicked on ‘Have Disk’
5. Browsed ‘android_winsub’ and clicked Open and OK
6. Android Composite ADB Interface appeared so I clicked ‘Next’
7. Message, ‘Windows can’t verify the publisher of this driver software’
8. Install this driver software anyway
9. Rebooted my computer
10. When the Nook is connected to the computer (ADB not enabled)
a. The Nook shows up as a G: drive and ‘MyNOOK Setup’ is the only file in it
b. Clicking on the ‘MyNOOK Setup’ brings me to a message:
• Welcome to MyNOOK Setup.
• MyNOOK Setup is a one-time installation that will allow you to tranfer your personal files to your NOOK.
• Transferable files include, but are not limited to: photos, music, videos, EPUB, PDF and Microsoft Office files.
• Note: Copyright protected files are not transferable
• To install, go to .... can't post link since im a noob
• For more information, visit ..... can't post link since im a noob
c. MyNOOKSetup.dmg appears when I click on the first link
11. When the Nook is connected to the computer (ADB enabled)
a. AutoPlay ‘BNTV600’ constantly appears.
12. I cannot access the internal or external memory on the Nook for both #10 & #11,
13. Running ‘makeroot.bat’ in the cmd for both #10 & #11 does not work either.
14. Device Manager / NOOK (BNTV600 no longer exist)

Follow my instructions to install the drivers and use my driver file from my first post. Go to device manager and delete any those three drivers you installed earlier, composite, mtp, etc. Then just do the bntv600.
Sent from my Nook HD+ using Tapatalk

Cool but....
...I am having a slight problem. I can not download your attached file usb_driver_r04-windows-Modded-for-HD.zip :/ everytime I do my computer which is running windows xp is telling me there is nothing there. Can you please help me thank you

Possible driver conflict with Samsung Galaxy Tab 7 Plus
leapinlar said:
Follow my instructions to install the drivers and use my driver file from my first post. Go to device manager and delete any those three drivers you installed earlier, composite, mtp, etc. Then just do the bntv600.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
• NOOK (G Drive appears in My Computer
When ADB is enabled
• NO NOOK (G Drive in My Computer
• BNTV600 AutoPlay windows constantly pops up
I forgot to say that I have a Samsung Galaxy Tab 7 Plus installed in this computer. The following items are what I see in Device Manager:
• Portable Devices / NOOK
• SAMSUNG Android Phone / Android Composite ADB Interface
I tried deleting all the drivers and repeat your instructions but the SAMSUNG Android Phone / Android Composite ADB Interface keeps appearing.

Dopey32 said:
...I am having a slight problem. I can not download your attached file usb_driver_r04-windows-Modded-for-HD.zip :/ everytime I do my computer which is running windows xp is telling me there is nothing there. Can you please help me thank you
Click to expand...
Click to collapse
I don't know what to tell you. I just tried again with windows XP and it downloaded fine. Just keep trying. And watch where windows puts it.

cybersonic_ca said:
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
•NOOK (G Drive appears in My Computer
When ADB is enabled
•NO NOOK (G Drive in My Computer
•BNTV600 AutoPlay windows constantly pops up
Click to expand...
Click to collapse
I experienced a lot of the same symptoms.
The Nook G: is for Mac users that do not have MTP. It is so they can get the drivers they need. Notice the .dmsg (sp ?) is for them. That will only go away when you get MTP working or switch to enabled adb.
I was most concerned with getting the adb interface working, so I just ignored the MTP issues until later. In fact I temporarily disabled it so it would not keep popping up during adb.
After I got everything sideloaded and rooted, I tackled the MTP issue. With adb unchecked, I went to USB devices and uninstalled the USB mass storage device (which was the Nook G). Then it recognized MTP.
Sent from my Nook HD+ using Tapatalk

I think it's safe to say that what we(me and other who got all the stuff out seperately) did so far aren't anything very dangerous. We havn't touch any other partition or boot loader. Unless you mess them up yourself since now you have root, then the worst it could happen is a full factory reset or you can force yourself to factory reset it.

okay got a little farther
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on

All these tips also help with the HD. Thanks so much!
Sent from my Nook HD using xda premium

Dopey32 said:
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
Click to expand...
Click to collapse
Then you have either not installed the Android SDK (Software Development Kit) on your PC (which includes adb) per the B&N instructions or your path variable is not set to include where you installed it.
Sent from my Nook HD+ using Tapatalk

Dopey32 said:
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
Click to expand...
Click to collapse
if you can't follow or understand the instructions about adding the path to adb in the environment path you can always just cd "/to the directory adb is installed/" and run adb directly from there. easy way is to just drag the folder into the command prompt window. it'll save a bit of typing - only works if you're not running cmd as admin.

You said you modded the drivers from B&N? What did you change? Just curious...

So, instead of making another thread, since this is a tips thread, I'll just post it here.
Just in case you are not familiar with a factory reset on the Nook HD+, there are two kind of factory resets. The one that you perform yourself, which is actually not a full factory reset and the one that Nook get pissed and do the full one.
A factory reset that you perform yourself, whether from the GUI or button combination will basically clean the partition /data while a full blown one will basically restore other partition such as /system.
Why do I bring this up, because as we know, we are not perfect. I make mistake and so do other. Sometime instead of trying to re-trace the step and fix our mistake, it's easier to just reset everything. Well, since we can't just do a full blown factory reset our self, at least not very easy, we can at least force the Nook to do it for us.
So, if you felt like I did something wrong, and I don't know which step to take next, I make a little tool for you to start over. You can see the attachment, reset.zip in there, there are 3 files. You only have to run reset.bat if you need a linux version, maybe you can beg the OP to do it for you. If you exam the package, you can see that this is very similar to the original root method which force itself to factory reset, so this is basically a modified version of that. Obviously you still required ADB. Well, on the other hand, if you never get ADB working in the first place, you probably can't mess up that bad that you need this tool in the first place.
Let me make it clear, this tool WILL RESET EVERYTHING. It also REBOOT MANY TIMES. And expect the whole process to take about 10 minutes.

dbh369 said:
You said you modded the drivers from B&N? What did you change? Just curious...
Click to expand...
Click to collapse
I actually modified a generic driver by putting the Nook HD+ device id in it. I was not able to download the B&N driver so I don't know if it needed modifying or not.
Sent from my Nook HD+ using Tapatalk

cybersonic_ca said:
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
• NOOK (G Drive appears in My Computer
When ADB is enabled
• NO NOOK (G Drive in My Computer
• BNTV600 AutoPlay windows constantly pops up
I forgot to say that I have a Samsung Galaxy Tab 7 Plus installed in this computer. The following items are what I see in Device Manager:
• Portable Devices / NOOK
• SAMSUNG Android Phone / Android Composite ADB Interface
I tried deleting all the drivers and repeat your instructions but the SAMSUNG Android Phone / Android Composite ADB Interface keeps appearing.
Click to expand...
Click to collapse
I am having the same problem as Cybersonc_ca. I did everything according to the nook developer website and when I enable ADB on my nook hd+, it does not show my BNTV600 under portable devices but I DO have Android Phone >> Android Composite ADB Interface.
If I go to command prompt, how can I make it so that it checks that folder as well?
I apologize for such noob questions. Thank you.

sayw0rd said:
I am having the same problem as Cybersonc_ca. I did everything according to the nook developer website and when I enable ADB on my nook hd+, it does not show my BNTV600 under portable devices but I DO have Android Phone >> Android Composite ADB Interface.
If I go to command prompt, how can I make it so that it checks that folder as well?
I apologize for such noob questions. Thank you.
Click to expand...
Click to collapse
Go to command prompt and type 'adb devices' and see if you have any. And the looking for bntv600 was for getting the composite to show. You have that.
Sent from my Nook HD+ using Tapatalk

[Q] Desperate need some help, failure updating 4.4

my nexus 4 was rooted with 4.3 but then i decide to upgrade to 4.4
this is the video i am trying to follow, basically just wipe & install which i did most the time.
youtube title "NEXUS 4: HOW TO MANUALLY UPDATE TO ANDROID 4.4 KITKAT"
it has two files one is mako and one is gapp.
after i did all the wiping in cwm and try to install the mako file, it shows "no file context" or sth similar, and installation is abort (i think there is problem when i transfer the file), but then i continue to install the gapp file (what the hell was i thinking?)
so now i am stuck in the google start up loop, i can only access cwm recovery mode and don't have a valid rom to install in my sdcard.
i tried to adb push another rom to the sdcard with no success (my storage was already very low, any way to remove files in the storage at this point?)
the "mount & storage" also doesn't seem to let me mount the sdcard (but system shows up "unmount").
so now i don't know what to do.
if anything has any idea or suggestion please let us know.
i am quite desperate now with a dead phone and will try anything.
thanks for reading such a long thread.

Dude that vid is old and it installs pa or some other port just flash factory images from google
Sent from my F1 using xda app-developers app

try to sideload a zip with ADB in recovery. no need to copy to your internal storage.
also try to connect with adb shell, then you can delete some files manual with rm.

Frickelpit said:
try to sideload a zip with ADB in recovery. no need to copy to your internal storage.
also try to connect with adb shell, then you can delete some files manual with rm.
Click to expand...
Click to collapse
any step by step guide to do this?
i am still new to this thing even i install a few roms before.
i will google it now, but any additional info is much appreciate.
thanks

Frickelpit said:
try to sideload a zip with ADB in recovery. no need to copy to your internal storage.
also try to connect with adb shell, then you can delete some files manual with rm.
Click to expand...
Click to collapse
frustrated..
i can't seem to get my windows to recogize the device (when i type adb devices, it shows an empty list)
already try trouble shooting this for a long time with no result.
any idea?

telly0050 said:
frustrated..
i can't seem to get my windows to recogize the device (when i type adb devices, it shows an empty list)
already try trouble shooting this for a long time with no result.
any idea?
Click to expand...
Click to collapse
after tons of troubleshooting finally got it back to work.
it ends up the reason is i didn't update to the latest cwm at the very beginning.
and sideloading 4.4 didn't work because of that too, i have to install an old 4.2 to have it working.

Database Users

welcome