[Q] Wifi question on gingerbread (stock and MS2Ginger 4) - Milestone 2 General

Hi,
I was using CM10 by Tezet, but when I started reading the posts on MS2Ginger 4 Stable v2 thread by Danik, I wanted to give it a try and compare the performance.
But something is really annoying me: when I try to connect to my wifi at home (and at work), it connects, I start browsing and downloading apps but, after a few minutes, i can`t use internet anymore. The wifi says it's still connected, but I can't browse or use play (it says 'no data connection'). It is happening almost all the time (although sometimes I can hold the connection for longer periods).
Is someone else having the same problem? Is it possible for me to fix it?
Thanks in advance.

Hi. 2.3.6 Android has some problems with losing wifi connection if IP lease time in the router is set to infinity. Setting a shorter IP lease time is said to solve problems. I've never experienced it, since I've never user 2.3.6, but I've read about this issue. Hope it helps.

rabinhood said:
Hi. 2.3.6 Android has some problems with losing wifi connection if IP lease time in the router is set to infinity. Setting a shorter IP lease time is said to solve problems. I've never experienced it, since I've never user 2.3.6, but I've read about this issue. Hope it helps.
Click to expand...
Click to collapse
Hey,
I'm not sure about what you're saying. I've found "Client lease time" under DHCP Settings, is that it? Mine is set to 0 (which the router says it's 1 day). Should I set this to another lower value then? How many minutes?
Tks

Mine is set to 600 seconds. Hope it helps.

rabinhood said:
Mine is set to 600 seconds. Hope it helps.
Click to expand...
Click to collapse
Thank you!! I'll try it here. But I'm having some other issues on MS2Ginger that I'm not liking. I'll probably stick to CM10...
Thanks again!

Exactly the same in my case, right now I'm using CM10. It's not so laggy after all, and almost everything's running well. Regards!

The problem while comparing this 2 great roms is that MS2Ginger4 v2 is using alternative I/O calc. ported from Driod2 which causing a huge slow downs (very often i had to remove battery), but allows you to recording in HD quality (what isn' t possible at CM10). The second thing is that CM10 have some features of ICS/JB and is nice for an eye (I wouldn' t to write all compare because u can sit, and read all thread with CM10 and MS2Ginger v2 and get some informations about how this or that rom is behaving)
Btw im so sorry for my english, so don' t judge me for it

Same for me. I am jumping from stock to cm10 then stock, miui v4, cm 10.1 and now Ms2g5 from danik. I am not sure where to stay cm 10.1 JB was very nice too, same with ny google nexus 7 tablet.
Gesendet von meinem A953 mit Tapatalk 2

Related

Xoom and the spontaneous internet shutdown!

Has anyone had an issue where the internet just spontaneously shutdown on you?
Talk about annoying!
Have anyone run across this and any solutions?
Thanks!
Sent from my Xoom using XDA App
Try a custom from if ur feeling adventurous
Funny thing is I've never considered it like I've done with my phones. So perhaps I need to check out some custom ROMs!
Sent from my Xoom using XDA App
I changed the channel on my wireless access point and so far so good. Yes it was very annoying!!
bman17 said:
Has anyone had an issue where the internet just spontaneously shutdown on you?
Talk about annoying!
Have anyone run across this and any solutions?
Thanks!
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
It used to happen to me on Stock all the time. On EOS everything is fine.
On my mom's old Netgear Wireless B router whenever I connect my Xoom to it the internet will last for about 30-40 seconds then it stops working although the SSID is still broadcasting there's no internet on either my Xoom or my mother's Laptop. Wired devices still have internet. Rebooting the router solves the problem until the Xoom connects again. Tried changing every possible setting including; fixed IP reservation, broadcast channel change, WEP-, WPA- and MAC filter on/off. Nothing works.
I was sad to learn that android does not support ad-hoc mode for tethering (as I was used to doing that before with Symbian phones and Netbooks)
have the same problem. any solution? team eos ics 1.0.0 already changed channel on router still same problem
Yeah my xoom is wifi only and it happens on my work and home wifi.
Not sure when I use the mobile hotspot on my phone though.
Sent from my SAMSUNG-SGH-I717 using XDA App
Happens to me from time to time, but if it makes you feel any better - it occurs more often on my wife's iPad than it does on my Moto Xoom...
simopimo said:
Happens to me from time to time, but if it makes you feel any better - it occurs more often on my wife's iPad than it does on my Moto Xoom...
Click to expand...
Click to collapse
You know what? THAT DOES make me feel better! haha
I wonder if this is why I can't get netflix to work every night when I'm at home. I'd be interested in knowing if there is a fix for this.
I've thought about flashing the EOS ROM, but aren't there still bugs with it? I can't get an answer as to the actual benefits of flashing this ROM over staying on Stock ICS.
Any thoughts or comments, I'd be greatly appreciative if some of the users of EOS could offer the benefits of this.
rvbarton said:
I wonder if this is why I can't get netflix to work every night when I'm at home. I'd be interested in knowing if there is a fix for this.
I've thought about flashing the EOS ROM, but aren't there still bugs with it? I can't get an answer as to the actual benefits of flashing this ROM over staying on Stock ICS.
Any thoughts or comments, I'd be greatly appreciative if some of the users of EOS could offer the benefits of this.
Click to expand...
Click to collapse
The team EOS roms are solid. They have a stable build available if you don't want to flash a nightly. The roms have plenty of enhancement to the kernel and interface. Also the custom toggles on the notification menu is awesome. Faster boot times. Being able to use wifi while on airplane mode so the 4g or 3g doesn't kill you battery. You can also overclock your device. Finally you can enable the xoom to decrease brightness without hitting the power button twice and turning the charging light while on. Being rooted also has its benefits.
Don't be afraid. Team EOS is your friend.
runhopskipjump said:
The team EOS roms are solid. They have a stable build available if you don't want to flash a nightly. The roms have plenty of enhancement to the kernel and interface. Also the custom toggles on the notification menu is awesome. Faster boot times. Being able to use wifi while on airplane mode so the 4g or 3g doesn't kill you battery. You can also overclock your device. Finally you can enable the xoom to decrease brightness without hitting the power button twice and turning the charging light while on. Being rooted also has its benefits.
Don't be afraid. Team EOS is your friend.
Click to expand...
Click to collapse
I've never considered flashing my xoom. If EOS is that good. Is there instructions on how to do it?
I had this problem also. I changed the channel and the type of wireless to G (I normally set it to N type). So far, everything is fine.
It does happen to me also. The worst thing is you need to restart the tablet to turn the connection back up.

Samsung Galaxy S2 Stuck Searching for GPS

Hi,
I have a S2 and a couple months back I didn't have any problems with my GPS. Now however, whenever I open the navigation and type a location, it finds me on the map and highlights the route to take, however at the bottom of the screen it says "searching for GPS" and therefore does not starts the navigation.
I have rooted the phone last month. I am not sure if this is the problem and I don't know how to unroot the phone so I can't check if this is the problem.
Any help is much appreciated. Thanks
Open maps first, wait for it to locate you in maps. Then exit maps and re enter navigation address and it should work
Happened to me when i Got an alluminium case
Sent from my GT-I9100 using Tapatalk 2
Thanks for the help. It seems to work when I open the maps first and then open the navigation later like bundi22 said.
Why is it weird like this? Is there anyway of making it work by opening the navigation straight away, instead of going onto the maps first?
im having a similar issue, 7 to 10 sats in view, no fix, happened on the last two days, before, fix was in 3~5 secs, anyone?
zkm1223 said:
Hi,
I have a S2 and a couple months back I didn't have any problems with my GPS. Now however, whenever I open the navigation and type a location, it finds me on the map and highlights the route to take, however at the bottom of the screen it says "searching for GPS" and therefore does not starts the navigation.
I have rooted the phone last month. I am not sure if this is the problem and I don't know how to unroot the phone so I can't check if this is the problem.
Any help is much appreciated. Thanks
Click to expand...
Click to collapse
Hey guys what I found worked really well for me was to use an app called fasterfix from play store to change the ntp server to my country which made it much better (resets on rom flash) also mobile data works much better than wifi for a fix and very rarely it just gets stuck so a quick reboot might help!
I'm having the same issue since yesterday, just not finding any GPS satellites, but it was fine two days ago.
Sent from my GT-I9100 using xda premium
redmanc35 said:
I'm having the same issue since yesterday, just not finding any GPS satellites, but it was fine two days ago.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Use GPS status fron store. Sorts all my issues
Used that and then faster fix, hasn't helped yet. Will keep trying different things.
Sent from my GT-I9100 using xda premium
redmanc35 said:
Used that and then faster fix, hasn't helped yet. Will keep trying different things.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi sorry to hear that but does this issue persist across reboots? I doubt the problem is due to rooting but sometimes it can help to either wipe cache and dalvik or re-flash your rom. I have had random GPS issues on some firmware versions but for me personally DXLPB has been the best. I would start by trying small changes like wiping caches first though and save changing roms for later if this is your only issue. Also, sometimes performing a full wipe can fix small bugs like this but a full wipe can take a lot of time so let's save that for a last but possible option! Good luck with it though, I know how annoying it can be if the GPS plays up!
The ROM I use: http://forum.xda-developers.com/showthread.php?t=1544487
The Kernel I use: http://forum.xda-developers.com/showthread.php?t=1555259
pendejerto said:
im having a similar issue, 7 to 10 sats in view, no fix, happened on the last two days, before, fix was in 3~5 secs, anyone?
Click to expand...
Click to collapse
I've got the same . Not sure if the weather has got anything to do with it. it has been very cloudy for x days here in Scotland.
I have never had any problems with gps until now. About 10 satellites in view but no fix. It drives me crazy because I run with endomondo using gps signal.
I read about mods that improve gps fix but I can not find it now.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
egps2 said:
Hey guys what I found worked really well for me was to use an app called fasterfix from play store to change the ntp server to my country which made it much better (resets on rom flash) also mobile data works much better than wifi for a fix and very rarely it just gets stuck so a quick reboot might help!
Click to expand...
Click to collapse
Great tip mate, had issues with getting GPS Fix after flashing CM9 but used your fasterfix app tip, selected UK and bosh, not getting fixes on 10 satellites Thank you very much sir, saved me flashing another ROM.
redmanc35 said:
Used that and then faster fix, hasn't helped yet. Will keep trying different things.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Are you sure you used fasterfix properly? Did it actually changed your Current Server? My one by default was set to an american/canadian one, hence why I wasn't getting any fixes. Changed it to my country and now it works like a charm .. Select your country/region and hit go and make sure the server link in Current Server updates, then use GPS Test app to test your GPS.
What rom are you guys using? I've noticed that my GPS sucks since installing XWLPM (Russia 4.04). I tried flashing back to a different modem but it didn't help. I'm patiently waiting for a new 4.04 ROM which might help the situation out. I've tried fasterfix as well as several other programs but it doesn't help much. My phone used to get a gps lock within 10 seconds indoors and within 5-7 seconds outdoors. Now it takes minutes...
TheSopranos16 said:
What rom are you guys using? I've noticed that my GPS sucks since installing XWLPM (Russia 4.04). I tried flashing back to a different modem but it didn't help. I'm patiently waiting for a new 4.04 ROM which might help the situation out. I've tried fasterfix as well as several other programs but it doesn't help much. My phone used to get a gps lock within 10 seconds indoors and within 5-7 seconds outdoors. Now it takes minutes...
Click to expand...
Click to collapse
I'm currently running on CM9 nightly, stock CM Kernel, KH3 modem. Try testing out a few different regions in FasterFix. Use the GPS Test app to test your GPS. And, obviously, make sure you're outside or close enough to a window to get a clear signal.
so which server do i set for australia
snappy123 said:
so which server do i set for australia
Click to expand...
Click to collapse
Maybe Oceania. I'm not too sure, best to choose the reagion nearest to you and if that doesn't work try a different one.
egps2 said:
Hey guys what I found worked really well for me was to use an app called fasterfix from play store to change the ntp server to my country which made it much better (resets on rom flash) also mobile data works much better than wifi for a fix and very rarely it just gets stuck so a quick reboot might help!
Click to expand...
Click to collapse
+1.
Resolved in the same way.
gps fixes quicker when you take you're phone out of aluminium case(if you have one)
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
I live in Sweden. I've tested: stock XWLPG; RR with kernels: CM9 (not the last one though), Siyah 3.4.1, NEAK 2.1.1; CM9 RC2, CM9 0721.
Results:
- Instant GPS lock on stock XWLPG (blinking icon, fix within few seconds) and on RR (no blinking icon, fix within less than ten seconds) but only with Siyah and NEAK kernels. No problems whatsoever.
- Unfortunately both CM9 builds and RR with CM9 kernel gave horrible scores. It took 4-8 minutes to fix.
I find it really hard to believe that gps problems are weather-related (at least in my place).
Samsung's GPS always hard to link the satellites, it must work with A-GPS assist, you can download faster fix from google play, and assigned a agps sever near your region, that's helpful
Sent from my GT-I9100 using Tapatalk 2

Announcement: CyanogenMod 9.1 ICS Stable build RELEASED!

Let's go to get.cm/?type=stable
You can see cm-9.1.0-p1.zip (cm-9.1.0-p1c.zip)
for GSM (P1) and CDMA (P1c)
What's the difference? And is It available for the P1000N?
Sent from my GT-P1000N using xda premium
Let’s try something new: CM9.1 and SimplyTapp
Seems like the main change is the inclusion of NFC payment. The blog post also mentioned bugfixes but there's no detail about them.
R u retarded ?
Sent from my GT-P1000 using XDA Premium HD app
NFC is not for our device.
Sent from my GT-P1000 using xda app-developers app
I'm well aware that the P1000 doesn't support NFC. It is stated in the article that NFC is only for compatible handsets anyway. Maybe I shouldn't have linked a general CM9 article in a device specific forum, but.... meh
Difference with cm9 rc1
hello,
Im very much interested with this new rom. I would just like to know what are the major differences with this new rom, compared to the cm9 rc1? tried searching for details about this new rom, but couldnt find any. I use the cm9 rc1 as a daily driver. It has worked for me very well, although there are minor errors (which is another topic). Pls let me know, so I can decide whether to try this out or not. thanks very much.
Been running it for two days now. Nice and stable.
Sent from my Samsung Galaxy Tab P1000 powered by CyanogenMod 9.1
Roberto_Lim said:
Been running it for two days now. Nice and stable.
Click to expand...
Click to collapse
Been runnigng 9.0 for 1 week with no (major) problems. Upgraded to 9.1 and 3g umts signal strength was shown as missing most of the time with no calls, sms or data connection possible. Reverted to 9.0 and 3g got back working. Will try again in a few days....
Among the other issues I have with 9.0:
- light sensor doesn't seem right (and androsensor cannot report it at all)
- proximity sensor doesn't seem right either but I'm no longer sure that the P1000 has one, will check on another P1000 still on samsung fw 2.3.3
Installed CM 9.1, working fine for me. However, I installed 20120831 Gapps, and they are working fine for me except Google Play - keeps returning 'server error' when trying to connect. Any ideas? What version of Gapps are you guys using (link please)?
Also, I came to CM 9.1 from CM 10 nightly build, no problems flashing. But now I can't seem to be able to flash CM 10; it reboots during flashing process. Do I need to go back to stock ROM with Odin or something?
Just flashing my rc1 cm9 to the latest stable 9.1. Gchrome still force close
Send from my 4.0.3 GT-I9100 premium xda
If I may, I'd like to ask how long will your battery last from full recharge on a regular use? By regular I mean, a few games here and there, auto sync enabled, wifi on for 70% of the time, and using Mobile data when there's no wifi.
I would like to benchmark my tab's battery performance against other users.
Thanks,
Griffith
Sent from my GT-P1000 using xda app-developers app
lbit said:
Upgraded to 9.1 and 3g umts signal strength was shown as missing most of the time with no calls, sms or data connection possible.
Click to expand...
Click to collapse
Reinstalled 9.1 manually (first time I used ROM Manager) and it works fine now
No CM9.1 for P100Nusers
Sent from my GT-P1000N using xda premium
Wifi Problems
hello guys,
i admit im a noob at these kinda stuff but pls hear me out
i've flashed my fathers tab using the overcome method up to the part or flash the actual rom thats when i changed it and flashed cm9 stable
the rom is awesome, ive used it on my galaxy s and it worked fine but on the tab i've found two problems
1- i cant get access the wifi settings, i press the wifi and nothing shows up, and although it gets connected somehow, it doesnt show on the bar that im connected , the internet is very slow and i cant access google play
2- the tab for some reason i dont understand is getting hotter thaan usual specailly on the right side (where the power and volume control buttons), ive changed the cpu governor to on demand but it is still a bit warm
the most important thing is how to fix the wifi,
its the regular international galaxy tab p1000 / p1
Downloadaholik said:
hello guys,
i admit im a noob at these kinda stuff but pls hear me out
i've flashed my fathers tab using the overcome method up to the part or flash the actual rom thats when i changed it and flashed cm9 stable
the rom is awesome, ive used it on my galaxy s and it worked fine but on the tab i've found two problems
1- i cant get access the wifi settings, i press the wifi and nothing shows up, and although it gets connected somehow, it doesnt show on the bar that im connected , the internet is very slow and i cant access google play
2- the tab for some reason i dont understand is getting hotter thaan usual specailly on the right side (where the power and volume control buttons), ive changed the cpu governor to on demand but it is still a bit warm
the most important thing is how to fix the wifi,
its the regular international galaxy tab p1000 / p1
Click to expand...
Click to collapse
Did you try reboot?
"I do exist.. that feels good.."
Downloadaholik said:
hello guys,
i admit im a noob at these kinda stuff but pls hear me out
i've flashed my fathers tab using the overcome method up to the part or flash the actual rom thats when i changed it and flashed cm9 stable
the rom is awesome, ive used it on my galaxy s and it worked fine but on the tab i've found two problems
1- i cant get access the wifi settings, i press the wifi and nothing shows up, and although it gets connected somehow, it doesnt show on the bar that im connected , the internet is very slow and i cant access google play
2- the tab for some reason i dont understand is getting hotter thaan usual specailly on the right side (where the power and volume control buttons), ive changed the cpu governor to on demand but it is still a bit warm
the most important thing is how to fix the wifi,
its the regular international galaxy tab p1000 / p1
Click to expand...
Click to collapse
sir,
if u got time try to redo all the restocking method (overcome) flash overcome rom it help prepare your tab for a higher version of ROM like cm9 or cm10. i think i will make your tab problem go away..
have a nice day sir.
:angel::angel::angel:
Declan79 said:
Just flashing my rc1 cm9 to the latest stable 9.1. Gchrome still force close
Click to expand...
Click to collapse
For chrome see this.
Can you confirm if you have also these issues:
- light sensor not working (eg. go to system settings-display-use custom levels and edit levels: the top left readings don't change with light conditions; or test with "androsensor")
- proximity sensor missing (according to "androsensor")
- stock sound recorder app missing (there is a sound recorder apk in /system/app though, but I can't figure out how to use it)
- torch not working/stock torch app missing
- frequent FCs with camera app
BTW do you know if there is an official discussion thread for cm9/p1 issues?
Battery Drain fixed?
With CM 9.1 I think the battery drain from 9.0 was kinda fixed, especially when connected to wi-fi. There are some small bugs like the wi-fi switch (it is on after booting but the wi-fi is turned off. Still smooth and grear UI. Love ICS!
Apparently there's a new nightly release both for p1 and p1n
Sent from my GT-P1000 using xda premium

Hyperion 8 issue

Does anyone experience wifi disconnect and reconnecting while browsing?
Sent from my GT-S5360 using xda app-developers app
Noo..
yes i do
I do too. So that makes two of us? What can be the problem?
Sent from my GT-S5360 using xda app-developers app
Oh c'mon guyz..
Why u never read.
Its in the same post of hyperion..
U got to go to..
Settings>wifi>option button>deep sleep policy nd change it to dont disconnect
** rooting is new for me,
nd i am a noob to root....**
menewtoroot said:
Oh c'mon guyz..
Why u never read.
Its in the same post of hyperion..
U got to go to..
Settings>wifi>option button>deep sleep policy nd change it to dont disconnect
** rooting is new for me,
nd i am a noob to root....**
Click to expand...
Click to collapse
Yes, this worked for me too. :good:
booterbotter said:
Yes, this worked for me too. :good:
Click to expand...
Click to collapse
i knw it worked ..
next time plz read full article..
carl didnt wrote all that just to pass time..
** rooting is new for me,
nd i am a noob to root....**
menewtoroot said:
Oh c'mon guyz..
Why u never read.
Its in the same post of hyperion..
U got to go to..
Settings>wifi>option button>deep sleep policy nd change it to dont disconnect
** rooting is new for me,
nd i am a noob to root....**
Click to expand...
Click to collapse
agree
Random reboots in Hyperion 8
Overall the Hyperion 8 ROM is a nice-good-looking one. However, I've found 2 major bugs(?):
It reboots randomly at least once a day.
The "Restart" option doesn't work. The phone shuts down but never comes on.
In both cases, when booting, it gets stuck in the Samsung logo. To boot up, I have to remove the battery.
Also, it takes ages to reboot, about 6 min.
Does anyone is experiencing the same issues? Any possible solutions?
Cheers.
Blue.Ghost said:
Overall the Hyperion 8 ROM is a nice-good-looking one. However, I've found 2 major bugs(?):
It reboots randomly at least once a day.
The "Restart" option doesn't work. The phone shuts down but never comes on.
In both cases, when booting it gets stuck in the Samsung logo. To boot up, I have to remove the battery.
Also, it takes ages to reboot, about 6 min.
Does anyone is experiencing the same issues? Any possible soluctions?
Cheers.
Click to expand...
Click to collapse
I would say try re-flashing it following the install instructions from the Hyperion 7 thread exactly.
I have had the same thing as you when I first installed hype 8 but no random reboots and restart works fine on my current install
One problem I have with Hype 8 is that the stock browser included with the ROM will not connect via wi-fi, at all - although all other apps like Play store do, the browser only works on 3G. I usually use One Browser but that doesn't work either. I am currently using Opera Mini as that will work but I have no idea why this is...and yes I have pruned the hosts file and checked the Droidwall is not on (even if it was I have configured all apps to have access). Annoying, like the way the data toggle sometimes doesn't turn off - but hardly a game-breaker when Hype is so excellent on battery life and memory usage :good:
Cheers,
Stokey
Blue.Ghost said:
Overall the Hyperion 8 ROM is a nice-good-looking one. However, I've found 2 major bugs(?):
It reboots randomly at least once a day.
The "Restart" option doesn't work. The phone shuts down but never comes on.
In both cases, when booting, it gets stuck in the Samsung logo. To boot up, I have to remove the battery.
Also, it takes ages to reboot, about 6 min.
Does anyone is experiencing the same issues? Any possible solutions?
Cheers.
Click to expand...
Click to collapse
I been using it since it came out & its never restarted on me or failed to boot
I suggest you reinstall it and use hells fusion #50 kernel
hey i m using jellyblast..how do i get hyperion 8 widout bricking my sgy...ive got d zip files
Sent from my GT-S5360 using xda app-developers app
Dhaval Bhatt said:
hey i m using jellyblast..how do i get hyperion 8 widout bricking my sgy...ive got d zip files
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Do a data wipe/reset ie wipe data system & cache
Mount everything ie system & data
Install zip from sd card
Select zip file
Done
a simple method
change your ROM
Hyperion bugs
stokeyblokey said:
I would say try re-flashing it following the install instructions from the Hyperion 7 thread exactly.
I have had the same thing as you when I first installed hype 8 but no random reboots and restart works fine on my current install
One problem I have with Hype 8 is that the stock browser included with the ROM will not connect via wi-fi, at all - although all other apps like Play store do, the browser only works on 3G. I usually use One Browser but that doesn't work either. I am currently using Opera Mini as that will work but I have no idea why this is...and yes I have pruned the hosts file and checked the Droidwall is not on (even if it was I have configured all apps to have access). Annoying, like the way the data toggle sometimes doesn't turn off - but hardly a game-breaker when Hype is so excellent on battery life and memory usage :good:
Cheers,
Stokey
Click to expand...
Click to collapse
Thanks for your reply Stokey. In my case, I've got no problems at all with the stock browser; it is able to connect via either wifi or 3G. I wonder if such differences may be due to the build we're using. I downloaded Hyperion 8 build 2 with the default Savie kernel. Are you using the same build?
Theroretically build 2 would be more stable, isn't it? Should I revert back to build 1?
Cheers,
Blue Ghost
Blue.Ghost said:
Thanks for your reply Stokey. In my case, I've got no problems at all with the stock browser; it is able to connect via either wifi or 3G. I wonder if such differences may be due to the build we're using. I downloaded Hyperion 8 build 2 with the default Savie kernel. Are you using the same build?
Theroretically build 2 would be more stable, isn't it? Should I revert back to build 1?
Cheers,
Blue Ghost
Click to expand...
Click to collapse
I'm using build 2 with hells fusion #50 - no problems at all
Make sure you have disabled wifi deep sleep in wifi settings
Blue.Ghost said:
Thanks for your reply Stokey. In my case, I've got no problems at all with the stock browser; it is able to connect via either wifi or 3G. I wonder if such differences may be due to the build we're using. I downloaded Hyperion 8 build 2 with the default Savie kernel. Are you using the same build?
Click to expand...
Click to collapse
No, I only had build 1 because every download of build 2 was interrupted I am trying again now as I really would prefer not to use Build 1 for obvious reasons! I only installed it because of a weird wifi issue I was having on Hype 7 - I did all the tweaks to fix wifi but even though it was on all the time, if I didn't use it for a short while sometimes the signal icon would go grey and stay grey - forever! Although connected and showing an IP address in the advanced wifi settings, nothing at all could connect through wifi and I only had 3G - this has happened 3 times with Hype 7 and necessitated a reinstall via stock each time, hence me wanting to try 8 as I needed the wifi connection and a battery that lasted a full work day for the last 2 days.
Theroretically build 2 would be more stable, isn't it? Should I revert back to build 1?
Click to expand...
Click to collapse
I would say stick with Build 2 for a couple of reasons: the launcher is not a paid-app; I think build 2 uses his Hype 7 launcher which I actually prefer (sometimes less functionality suits better); if there were any fixes from Build 1 they will be included although I don't think there were any that were mentioned...
Same kernel on both builds (thank you Savie! :good but as others are saying, you can use at least one other kernel - I have never changed just the kernel but maybe that would help fix my Hype 7 issues...anyhow, I am off to try Build 2 - good luck with yours - let us know how you get on.
Cheers,
Stokey
EDIT: Can anyone help me to get the AudioFX widget to actually do something other than be almost invisible whatever settings I use? Or suggest an alternative that works with Hype 8?
stokeyblokey said:
EDIT: Can anyone help me to get the AudioFX widget to actually do something other than be almost invisible whatever settings I use? Or suggest an alternative that works with Hype 8?
Click to expand...
Click to collapse
Open AudioFX in drawer app then adjust the transparency settings. Make it 20% then 40% then 60% then back to opaque. It will show up.
Sent from my GT-S5360 using xda premium
stokeyblokey said:
No, I only had build 1 because every download of build 2 was interrupted I am trying again now as I really would prefer not to use Build 1 for obvious reasons! I only installed it because of a weird wifi issue I was having on Hype 7 - I did all the tweaks to fix wifi but even though it was on all the time, if I didn't use it for a short while sometimes the signal icon would go grey and stay grey - forever! Although connected and showing an IP address in the advanced wifi settings, nothing at all could connect through wifi and I only had 3G - this has happened 3 times with Hype 7 and necessitated a reinstall via stock each time, hence me wanting to try 8 as I needed the wifi connection and a battery that lasted a full work day for the last 2 days.
I would say stick with Build 2 for a couple of reasons: the launcher is not a paid-app; I think build 2 uses his Hype 7 launcher which I actually prefer (sometimes less functionality suits better); if there were any fixes from Build 1 they will be included although I don't think there were any that were mentioned...
Same kernel on both builds (thank you Savie! :good but as others are saying, you can use at least one other kernel - I have never changed just the kernel but maybe that would help fix my Hype 7 issues...anyhow, I am off to try Build 2 - good luck with yours - let us know how you get on.
Cheers,
Stokey
EDIT: Can anyone help me to get the AudioFX widget to actually do something other than be almost invisible whatever settings I use? Or suggest an alternative that works with Hype 8?
Click to expand...
Click to collapse
Agreed! Or use BeatsWidget included in other roms like USSrv9 and ota of JellyBlast. Its beats themed and looks cooler than the default one.
Thank you to makeouttactics and GaEuL (pressed!).
This was driving me mad!
Oh, and today whilst using Opera Mini to post on Facebook I had a spontaneous reboot - first one on Hype 8...will keep you posted.
Cheers,
Stokey

Issues with Mobile Data - Need Help

Hey guys this is my first thread and this is an issue i've been having since i first got the device.
Well, mobile data is always connected and blue, however, sometimes when i'm doing something that requires internet, it takes a while to start actually working and showing the up and down arrows. This causes delayed notifications in apps like whatsapp.
Example:
I open a whatsapp conversation. What I should get is the "last seen" status of my contact, but this takes up two 5 seconds for the mobile data connection to actually kick in.
Is this a known issue with the nexus 4? are there any fixes someone might direct me to? It's not a deal breaker but it's a really annoying issue that I didn't have back when I was using the S3.
P.S: If it matters in anyway, I'm using CM 10.1.2 Stable and the latest Franco Kernel nightly.
Thanks for annoying who might give me some helpful tips or ways to fix this. :fingers-crossed:
Rsoub said:
Hey guys this is my first thread and this is an issue i've been having since i first got the device.
Well, mobile data is always connected and blue, however, sometimes when i'm doing something that requires internet, it takes a while to start actually working and showing the up and down arrows. This causes delayed notifications in apps like whatsapp.
Example:
I open a whatsapp conversation. What I should get is the "last seen" status of my contact, but this takes up two 5 seconds for the mobile data connection to actually kick in.
Is this a known issue with the nexus 4? are there any fixes someone might direct me to? It's not a deal breaker but it's a really annoying issue that I didn't have back when I was using the S3.
P.S: If it matters in anyway, I'm using CM 10.1.2 Stable and the latest Franco Kernel nightly.
Thanks for annoying who might give me some helpful tips or ways to fix this. :fingers-crossed:
Click to expand...
Click to collapse
try raising your voltage at 384mhz to 800mV or higher
try a different rom
try a different kernel
it could be an issue with that/those apps.
simms22 said:
try raising your voltage at 384mhz to 800mV or higher
try a different rom
try a different kernel
it could be an issue with that/those apps.
Click to expand...
Click to collapse
I'll try raising the voltage and report back if it's better
This issue has been happening to me on stock rom/kernel, cm 10.1.2 and cm kernel as well as P.A and P.A kernel.
Thanks for the tip
simms22 said:
try raising your voltage at 384mhz to 800mV or higher
try a different rom
try a different kernel
it could be an issue with that/those apps.
Click to expand...
Click to collapse
Hey man, I tried raising the voltages, but it didn't seem to help that much.
Is there any other way to fix or make this issue better?
It's a bit annoying that other phones on the same network get instantaneous mobile data.
Looking forward to more advice! :fingers-crossed:
hey guys, im suffering from this problem too, & don't know how to raise the Voltage or how to change the kernel or rom ?

Categories

Resources