Hello i have a mytouch 3g first edition with out the mic, im trying to boot in hboot to root it but i, power on and volume down nothing happends , then i try to use back key plus power and it flickers white showing the hboot screen for a split second can someone help me.
ordsNF containing
jeff7790 said:
Hello i have a mytouch 3g first edition with out the mic, im trying to boot in hboot to root it but i, power on and volume down nothing happends , then i try to use back key plus power and it flickers white showing the hboot screen for a split second can someone help me.
Click to expand...
Click to collapse
Hi Jeff.
Make sure that the phone is fully powered-off first, and not just in standby mode. Then hold the VOL- button down first, then hold down the POWER button. Make sure you keep holding the buttons without letting go. It could take up to 10 seconds, but should happen quickly.
If that doesn't work, try going into Recovery mode. Power the phone off completely, then hold HOME and POWER.
Let me know how that works.
Related
Hi!
I've flashed my phone quite a few times and now I can't get pass the tri color boot up screen. It all started when I started to use task29 for my flashing. Wasn't the first time I used it but the last time I did the phone just ended up with (what it seems like no rom). When I press the power button the phone loads the tri color screen saying serial or USB (if USB connected) I've tried to reflash with both SD-card and USB but it ends up the same way. Flashing reaches 100% (tried stock rom and others) but when booting up it still goes to the tri color screen.
Using SPL 1.56 OliNex.
Hopefully somewould knows what to do. Big thanks!
looks to me like your volume down button may be stuck in, see if it is and what happens after that
Hi. Well the volume button is stuck but it usually works by pressing the power button a couple of sec. now that doesn't work
sabio said:
Hi. Well the volume button is stuck but it usually works by pressing the power button a couple of sec. now that doesn't work
Click to expand...
Click to collapse
then you need to unstick the button, it will never boot properly otherwise.
flashed a couple of roms today and now it's stuck on htc green screen!! ouch help needed, batt pull not working
nibs489 said:
flashed a couple of roms today and now it's stuck on htc green screen!! ouch help needed, batt pull not working
Click to expand...
Click to collapse
can you get into recovery by holding the volume down button when the phone is off and then powering the phone up while still holding it down?
as long as it turns on and screen comes on, you are not bricked .. it's almost impossible to birck this phone ..
can't get into recovery at all, phone is not responding to anything just constantly stuck on initial white htc screen. have backup on sd though no way to get there through phone
how can pulling the battery not work? If there's no power to power up the screen it should die instantly
Try keeping it out for like 10 mins or more.
Then go to recovery and wipe/reinstall from backup.
katman4 said:
how can pulling the battery not work? If there's no power to power up the screen it should die instantly
Try keeping it out for like 10 mins or more.
Then go to recovery and wipe/reinstall from backup.
Click to expand...
Click to collapse
And to get to recovery you have to start with the phone turned off (by pulling the battery). Then put in the battery and before you press the powerbutton, press and hold the vol- button down. When you're holding the vol- button, press powerbutton until the screen turns on, keep holding the vol button until you get into the bootloader just in case. From bootloader you can choose recovery with vol+ and vol-, powerbutton to select.
And as long as there's something happening on the screen (e.g. HTC logo) it's not bricked.
cheers Hawks556, all is good now
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
lummujaj said:
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
Click to expand...
Click to collapse
I don't think there should be a 'HTC' screen when you're booting into bootloader? I'm not sure, but just try holding down both the power button and the volume down button, as I think people have been able to restart the process after their phone has run out of battery or something similar. Hopefully everything should be OK once you've managed to access the bootloader.
Oh, and I don't mean to be rude, but use a better PC next time
phone wont go into bootloader , phone just turn on NORMALLY , but while there is no system at all on his memory he just stuck at HTC (green) on white background !
im suspecting that my VOLUME DOWN button is broken ?
Have you tried the back key?
power (end call) + back key ?
If you have magldr installed it should bring you to magldr menu which would point towards faulty vol down button ....
lummujaj said:
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
Click to expand...
Click to collapse
If I remembered correctly, some of the people mentioned that HD2 is quite difficult to brick. I think that you could still try to work with your phone unless you still suspect that you have a faulty volume down button. I noticed in your statement in Step 2 coloured red that you press the end key once. I haven't flash in a while but I think you should hold the end key with the volume down button until you get into bootloader mode (screen with tri colour). Don't just press the key once. I hope this helps.
lummujaj said:
... tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc ...
Click to expand...
Click to collapse
I am sorry, but I think you may have bricked your device.
Sure thing, the european HD2 is quite difficult to brick. But your PC had frozen while you were in the middle of flashing. (right?)
It is like pulling out the USB cable while flashing. You can try flashing from sdcard. Are you sure you are not able to go into bootloader?
To get to bootloader press and hold vol down button and then press the power (end call) button. I do a lot of flashing lol
lol...i just noticed the threadstarter's point of saying he pressed the power key "once". So i thought that was a mistake. Could be surely from the faulty volume button. Don't see any reply yet from him.
First question: Not sure if it's the phone or the software but when I shutdown my phone and try to turn it back on by holding the volume button and the power button, it doesn't work. But as soon as release the power button, it decides to turn on. Can someone help me with this?
Second question: Does my phone need to be rooted to get Android 4.1.1?
NOTE* Currently on Android 2.3
1) Keep trying, you shouldn't have to release a button to turn it on. Are you holding the right buttons? Its down+power
2)Yes
THEindian said:
1) Keep trying, you shouldn't have to release a button to turn it on. Are you holding the right buttons? Its down+power
2)Yes
Click to expand...
Click to collapse
Yeah, I watched a video on it and I'm doing it exactly like them and it's not working.
xxhunter95xx said:
Yeah, I watched a video on it and I'm doing it exactly like them and it's not working.
Click to expand...
Click to collapse
First Volume down, then the power button, it should be on within 3 seconds.
Do you have ADB enabled? Plug your phone into your computer, if your computer recognizes it via ADB, come back
Help!
My htc my touch won't go into recovery mode after it is chosen. Only shows picture of phone with a red triangle
shelli1998 said:
My htc my touch won't go into recovery mode after it is chosen. Only shows picture of phone with a red triangle
Click to expand...
Click to collapse
I would try pushing recovery img through adb. See if that solves the problem.
I have D802 32gb rooted and have custom recovery
My pc and mac see my devise without any problems
But i cant enter any mod manual ex i cant enter recovery when hold power and vol down
But i can enter any mod with 3rd party app like quick boot
Need help guys
MaZaGnGy said:
I have D802 32gb rooted and have custom recovery
My pc and mac see my devise without any problems
But i cant enter any mod manual ex i cant enter recovery when hold power and vol down
But i can enter any mod with 3rd party app like quick boot
Need help guys
Click to expand...
Click to collapse
turn your phone completely off: unplug it from the usb and hold down the power button for like 20sec. the phone should not be turning on or doing anything. then press and hold the power plus volume down. as soon as the lg logo pops up, let go of those 2 buttons and immediately press and hold power + volume down again. this should bring up an all white screen with black letters. now press the power button 3 times til you get to "factory resetting".
freebee269 said:
turn your phone completely off: unplug it from the usb and hold down the power button for like 20sec. the phone should not be turning on or doing anything. then press and hold the power plus volume down. as soon as the lg logo pops up, let go of those 2 buttons and immediately press and hold power + volume down again. this should bring up an all white screen with black letters. now press the power button 3 times til you get to "factory resetting".
Click to expand...
Click to collapse
Thanx man it worked