Database Users

Flashing New Rom (Solved)

Hey guys, I am having trouble flashing a new rom onto my phone. I used to flash my Galaxy S3 almost every day, and for some reason, I am having trouble with the S4. I have rooted it, and installed Team Win Recovery Project v2.5.0.2 and sometimes the Rom will flash and work, like PA worked first time, so did MIUI Rom, but trying Most of the others they either say failed, or... they go through the whole installation process through the Recovery for Android Revolution HD, and then it boot loops, take battery out, put back in and wipe everything and it just stays on the first Samsung Logo and that's it.
Is there something I am missing?
I am wiping eveyrthing as well before I do it.
Any help will be really appretiated
Thanks

skrapi said:
Hey guys, I am having trouble flashing a new rom onto my phone. I used to flash my Galaxy S3 almost every day, and for some reason, I am having trouble with the S4. I have rooted it, and installed Team Win Recovery Project v2.5.0.2 and sometimes the Rom will flash and work, like PA worked first time, so did MIUI Rom, but trying Most of the others they either say failed, or... they go through the whole installation process through the Recovery for Android Revolution HD, and then it boot loops, take battery out, put back in and wipe everything and it just stays on the first Samsung Logo and that's it.
Is there something I am missing?
I am wiping eveyrthing as well before I do it.
Any help will be really appretiated
Thanks
Click to expand...
Click to collapse
Can you please elaborate this situation without any hassle.? Didn't get your properly. Come again.?:cyclops:

Disturbed™ said:
Can you please elaborate this situation without any hassle.? Didn't get your properly. Come again.?:cyclops:
Click to expand...
Click to collapse
My bad lol, in work and was typing fast.
Basically, when I flashed ParanoidAndroid on my phone, and it worked great, then I changed it to MIUI which worked great,
then I decided to Flash Omega Rom, which was fine, but the WIFI doesn't work for me.
So I tried to Flash Android Revolution and it goes through the Installation Process with no problems and goes into Boot Loop, even though I have done a full wipe of the device.
I am in the middle of Flashing Android Revolution now, for the 3rd time, and it has been on 10% installation for 10 minutes. This is all it says at the moment...
===========================
Android Revolution HD by mike1986
===========================
>>>Formatting partitions
(system is unmounted already)
(preload is unmounted already)
-- that's it --

Sorted, thanks anyway.
Just incase someone else is in the same situation,
All I did was take the battery out for 30 minutes or around that time, and just flash the rom, I didn't wipe or anything else, just flashed and done.
For people having Wifi issues, flash a different Kernel like Adam Kernel, that seems to work for me.

skrapi said:
Sorted, thanks anyway.
Just incase someone else is in the same situation,
All I did was take the battery out for 30 minutes or around that time, and just flash the rom, I didn't wipe or anything else, just flashed and done.
For people having Wifi issues, flash a different Kernel like Adam Kernel, that seems to work for me.
Click to expand...
Click to collapse
Good to see that. BTW Can u prefix solved in ur subject?
Sent from my Disturbed™ Galaxy S4

Disturbed™ said:
Good to see that. BTW Can u prefix solved in ur subject?
Sent from my Disturbed™ Galaxy S4
Click to expand...
Click to collapse
Yea sure no problem. How do you do it though? I have had a look but have no idea lol.

skrapi said:
Yea sure no problem. How do you do it though? I have had a look but have no idea lol.
Click to expand...
Click to collapse
Just edit ur first post and select advance edit. Then u can change it.
Or just double click over subject line for this thread in subforum.
Sent from my Disturbed™ Galaxy S4

Disturbed™ said:
Just edit ur first post and select advance edit. Then u can change it.
Or just double click over subject line for this thread in subforum.
Sent from my Disturbed™ Galaxy S4
Click to expand...
Click to collapse
Sweet, cheers mate = )

Im back lol....

Well after all these yrs im back to my ole trusty vibrant.
Broke my S2 yesterday with no insurance :-/
So here I am and don't really recall all the procedures....but im getting there slowly.
Currently im still running team whiskeys bionix v 1.3.1 from back in the day.
Any tips and tweeks would be appreciated

Or don't....don't plan on using this dinosaur for long

Shortbus-Driver said:
Or don't....don't plan on using this dinosaur for long
Click to expand...
Click to collapse
This "dinosaur" can run Jelly Bean 4.2 in case you didn't know, plenty of custom ROMS in the development section. If your staying on 2.2 then there are really no "tips and tricks", as those ROMs are very stable. The basic steps for flashing a ROM with this phone in recovery mode are as follows : format system, data and cache under "mounts are storage"(this is optional but recommended for a clean install). The next steps are necessary everytime you install a ROM unless told otherwise by the developer : wipe data/factory reset, wipe cache, wipe dalvik cache (under advanced) then install your ROM, now go back to the advanced section and fix permissions, now reboot and wait ten minutes. Note, if your going to flash from 2.2 to jelly bean then you will have to flash the ROM twice, the first flash just updates your recovery mode.
Sent from my SGH-T959 using Tapatalk 2

Thanks I wouldn't have known to flash twice on the jb ...I woulda just flashed back to stock and gone from there.
Also if im correct back when this phone was the phone to have ....flashing anything over gb meant loss of gps,wifi, along with other issues....does thus still hold true today?

Shortbus-Driver said:
Thanks I wouldn't have known to flash twice on the jb ...I woulda just flashed back to stock and gone from there.
Also if im correct back when this phone was the phone to have ....flashing anything over gb meant loss of gps,wifi, along with other issues....does thus still hold true today?
Click to expand...
Click to collapse
Gps is always iffy for the vibrant, but we are fine for the rest. :thumbup:
Nexus⁴ PAC 360° Productions

Shortbus-Водитель said:
Или не....не планируете использовать этот динозавр надолго
Click to expand...
Click to collapse
Phone is quite good, much better than the new HTC Desire Triple with an easy-beating screen! I ran it by Sadanand 4.3.1, works perfectly!

[Q] Blame Tyler. HELP!

I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.

Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
Same.

Same.
:crying:

Same.
Edit. I tried flashing the ROM by itself then booting the device. Then reboot into recovery and flash the gapps. It worked for me and I have seen others say it is hit or miss. It is worth a try though.

ernieb4768 said:
Same.
Edit. I tried flashing the ROM by itself then booting the device. Then reboot into recovery and flash the gapps. It worked for me and I have seen others say it is hit or miss. It is worth a try though.
Click to expand...
Click to collapse
This doesn't work for me... anyone got a solution? That's annoying..

Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
Did you try a clean install?
-wipe data/factory reset
-flash ROM
-flash gapps
-restart
no "restore"
If you say you had an "Older" version, does this mean you were on PAC23 (with android version 4.2.2)?
If you are on a pre-android 4.3 version of PAC, you need to do a full wipe. If you are already on a 4.3 version of PAC and you have "blame tyler" issues, try factory reset, if the problem persists, try a different nightly

Just a little curious...is the Blame Tyler error a specific error or set of errors, or does Tyler get blamed for everything?
Also, can we get Tyler's xda username, so he can get the blame he deserves :laugh:

Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
try redownloading the rom zip! and check its md5 code before flashing!!
also do a clean flash! all wipes!
if it doesnt work then even try fix permissions option !
Sent from my C6603 using Tapatalk 4

'Blame Tyler' error is just a generic message displayed when some component crashes/throws an unhandled exception, etc. It's not related to a bad ROM d/l or MD5 code. Telling people to do a full wipe b/c of an undiagnosed error condition doesn't help much. There are far too many little brokens with this ROM that need to be addressed and given more developer support, if this ROM is get more adoption.
Since RC1, nightlies have been dropping for 2 months now - no log of what's fixed or added, unless you are a dev who can wade thru the build change logs and understand what that means. It's ridiculous that we've gone this long since RC1 with a new stable release and documented fixes. Maybe this info is buried somewhere, but it's not in the Spring GS4 forum and the Pac-Man website forum is dead.
These errors are not specific to any one nightly and have been going on for months.

the tyler message is just a replacement of the force close messages. It is meant as a joke as he is one of our devs and we all take turns being blamed for breaking stuff.
If your coming from the old stable and flashing the newest nightile...comming from 4.2.2. to 4.3.1 then a full wipe is required due to the different databases and newer code that isnt compatable with the old version. This should fix your issues.
Also please dont post tylers username as its not nice to go and troll him...

I flashed the rom successfully after a full wipe this weekend. Amazeballs. I blame Tyler for making all my friends jealous of my phone.
I want to keep up with nightlies. The only thing not working for me is the wifi tether. If I have the US snapdragon quad-core variant do I want the pac-jfltetmo.zip?
Sent from my SGH-M919 using xda app-developers app

experienced the same problem and would be greatful for help

vedhed21 said:
I flashed the rom successfully after a full wipe this weekend. Amazeballs. I blame Tyler for making all my friends jealous of my phone.
I want to keep up with nightlies. The only thing not working for me is the wifi tether. If I have the US snapdragon quad-core variant do I want the pac-jfltetmo.zip?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Yes, if you have the T-Mobile variant of the S4.

keyboard not working.....
Papa Smurf151 said:
the tyler message is just a replacement of the force close messages. It is meant as a joke as he is one of our devs and we all take turns being blamed for breaking stuff.
If your coming from the old stable and flashing the newest nightile...comming from 4.2.2. to 4.3.1 then a full wipe is required due to the different databases and newer code that isnt compatable with the old version. This should fix your issues.
Also please dont post tylers username as its not nice to go and troll him...
Click to expand...
Click to collapse
i have flashed your pac man rom to my galaxy sl everything went right but its keyborad was not working then i manually flashed another JB keyboard in recovery mode... then it worked ... and i flashed blackgapps(JB 4.2.2) from ENHDROIX developers and it is working quite well...
the only problem i had was keyboard stuff..
so devs should fix that issue...

GUYS THIS IS VERY STRANGE.. The nav bar at the bottom overlaps half of the dock of next launcher which makes the dock completely unusable and ugly.. the same problem persist in 50% of the other apps notably go sms, quick pic, go launchers and many others.. I have tried the milestone releases and a few latest nightlies but its still not fixed..
Its hard to believe there are many discussions of issues about pac rom going on but I didn't find this preety obvious and significant one anywhere..
I have waited like 3 months since I started with pac, updated about 5 nightlies along the way hoping it will be fixed but no luck everytime..
This one is serious.. It has forced me not to use some of my fav apps and use pie navigation at times..
No problem with all the minor bugs but this one is frustrating..
ANY IDEA GUYS??
PS. pac ver 4.3.1 on sg tab p3100 and sg3
Sent from my GT-P3100 using XDA Premium 4 mobile app

Do you know how to enable navigation bar? I saw all the settings in PAC settings>navigation bar but found no option to enable it.
Sent from my GT-P3100 using XDA Premium 4 mobile app

[Noobs Guide] How to get "DN3 (Ditto Note 3)" ROM working in Samsung Galaxy Note 2

[Noobs Guide] How to get "DN3 (Ditto Note 3)" ROM working in Samsung Galaxy Note 2
Hi Everyone,
I just now finished installing the ROM successfully so i thought i would atleast make this small tutorial for others, thinking it might be helping them. You wouldn't believe me. I haven't slept the whole night (9hrz without gap) to get this ROM working in my note 2.
Now, a few things about my phone. Trust me, you will require this info because you will then understand what your phone and my phone is. So you could have a clear idea on how to start or where to start.
Click to expand...
Click to collapse
Phone : Samsung Galaxy Note II N7100
Android Version : 4.1.1 (Its the same version that i had since the time i bought the phone, i didn't update or anything.)
Rooted : NO
Recovery : STOCK
Firmware: Indian firmware (sorry, i don't remember the firmware name)
Click to expand...
Click to collapse
Now, prerequisites...!
◘ A Samsung Galaxy Note II with definite 70% and above battery if you are a beginner.
◘ The data cable that is actually working when connected between phone & laptop.
◘ An external SD card with a minimum of 4 GB storage so that you can place the ROM to flash it through Recovery.
◘ DN3 (Ditto Note 3) ROM from E-team (Electron Team) downloaded & kept ready in your computer, because it's about 1.48 GB size.
[Important: See that the ROM is downloaded without any breaks. Check whether it is the "Download Success" or "Download Fail" in the Download Manager. If the ROM is not successfully downloaded & you continue to flash it into your Note 2. Then you are going to feel very bad (Trust me). So check it & only then be ready to start.]
Click to expand...
Click to collapse
Procedure...!
First : Rooting
follow this ----> http://beginnerguides.net/root/samsung-galaxy-note-2
rooting related files in the Root.rar
Click to expand...
Click to collapse
Second : EFS backup
follow this -----> http://forum.xda-developers.com/showthread.php?t=2255943
EFS backup files in the EFS.rar
Click to expand...
Click to collapse
Third : Flashing the Philz recovery
follow this ----> http://www.youtube.com/watch?v=RKfURLDlCRg
Philz recovery file in Recovery.rar
Click to expand...
Click to collapse
Fourth : Taking a Nandroid backup of the present stock ROM.
follow this -----> http://www.youtube.com/watch?v=DWbGzUHqOzI
in that your procedure is shown inbetween from 1:25 second to 1:56 second, after 1:56 seconds, do the follow what is being shown, slip back to here and do this ----> Just press the "backup" button and then "yes" , it wil take some time and backup your data, after backup completed, "reboot phone". In the sd card folder called "clockwordmod" will be there. This is the folder your backup is made by philz recovery. copy this entire "clockworkmod" folder to your computer. you will need it in the future. Keep it very safe if u have backed up a stock rom and require warrany.
Click to expand...
Click to collapse
Fifth : Flashing the DN3 ROM into your phone.
Follow this -----> http://www.youtube.com/watch?v=DWbGzUHqOzI Now see the full video in the link, do, exactly as he does, but at one point where u will see a selection of modem's (03:32 seconds). If you are from india, select mk4 rom , if u are other country, select mk9.. and on completion follow on screen steps like you saw in the video. In the video u will see wifi working, but here your wifi wont work, so skip there and come back do the 6th step to solve the wifi issue.
Click to expand...
Click to collapse
Sixth : Flashing the mj5 bootloader for fixing wifi in the Ditto Note 3 ROM
Follow this --->
Open Odin v3.07 from PC, Press PDA tab and select downloaded MJ5 Bootloader
Put device in download mode (Vol dwn + home +power)
Connect device and Flash
MJ5 bootloader file is in
MJ5bootloader.rar
Click to expand...
Click to collapse
Disclaimer:
As there are many rules over the forums i am restricted to some limit. I apologize. I just gathered all the links of forums that helped me and placed them over here with some quick download links. Also, just like everyone mention, I do alert you, that i am not responsible for any damage caused to your device. I can help you so far. But cannot buy you one if u damaged. Its solely your responsibility. You are the owner and you are responsible to what you might encounter. On reading this, you understand and agree that I'm no way responsible for anything, with this said, you are ready to start yourself.
Click to expand...
Click to collapse
credits
@iskwl
@thealphapoint
@kethan
@electron team
Click to expand...
Click to collapse
​​​​​
I'm sorry for english mistakes, but thank you all who read this. If any queries, comment below. Would be helping you...!
Click to expand...
Click to collapse

I have one question.
I need to use obligatorily external SD card?
Or I can place to internal too?
All custom roms flashed via external SD ?

How is the battery drain in this rom? I tired quite a few 4.3 based roms and the battery drain was terrible. So I happily went back to 4.1.2 based rom with perseus kernel minimal ram usage and amazing battery life. So just wanted to know about the battery drain and whether it can be used with the perseus kernel?
Sent from my GT-N7100 using XDA Premium 4 mobile app

Reply....
stebik said:
I have one question.
I need to use obligatorily external SD card?
Or I can place to internal too?
All custom roms flashed via external SD ?
Click to expand...
Click to collapse
I need to use obligatorily external SD card?
answer : Yes, OBLIGATORILY external SD card
I say internal also can be used, but the operating manner then would be little complicated for which you might land up into a CONFUSED situation. So it's much better to do it through a SD card
Or I can place to internal too?
Answer : Yes, you can place ,but i told u right If u want it complicated, you may if you already have an idea about Philz touch recovery & etc, then, step up
All custom roms flashed via external SD ?
Answer : You see, most of the people actually try to follow the safe and secure way so they do the flash of ROM's from the External SD card
Now doubts clarified ?
If got any more :cyclops: , just lemme know

Your Doubts just got clarified WiTH SCREENSHOTS
Zubair1024 said:
How is the battery drain in this rom? I tired quite a few 4.3 based roms and the battery drain was terrible. So I happily went back to 4.1.2 based rom with perseus kernel minimal ram usage and amazing battery life. So just wanted to know about the battery drain and whether it can be used with the perseus kernel?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
check out the screenshots attached
You will find out everything u needed
check this out for your kernel doubt.... http://forum.xda-developers.com/showpost.php?p=48701697&postcount=10216
He said tht those are the settings from his Ditto note 3 rom when using perseus kernel, so thats it Voila !
The kernal works celebrate
in this thread http://forum.xda-developers.com/showpost.php?p=48018349&postcount=7446
that perseus boy shared his happiness just check out
he was using the DItto note 3 rom aswell just like others

srinuscooby said:
check out the screenshots attached
You will find out everything u needed
check this out for your kernel doubt.... http://forum.xda-developers.com/showpost.php?p=48701697&postcount=10216
He said tht those are the settings from his Ditto note 3 rom when using perseus kernel, so thats it Voila !
The kernal works celebrate
in this thread http://forum.xda-developers.com/showpost.php?p=48018349&postcount=7446
that perseus boy shared his happiness just check out
he was using the DItto note 3 rom aswell just like others
Click to expand...
Click to collapse
Wow... Thanks for the information ... Now I'll definitely flash this rom!
Sent from my GT-N7100 using XDA Premium 4 mobile app

Just a word
Zubair1024 said:
Wow... Thanks for the information ... Now I'll definitely flash this rom!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Haha...:laugh:
okay, do it :silly:
if any doubts am here to help u out
So, go Crazzzzeeey over it
:fingers-crossed:Rock oN:fingers-crossed:

Ok, I'm looking to do this myself, I'm on a i317 (at&t lte variant) and have found the ROM for that version. My question is, I was told that it would be "trickier" to flash the custom ROM because I have already updated my phone to 4.3 stock. Now I'm aware that flashing the custom ROM will now void my warranty, that is not my concern, my question is what will make it "trickier?" I was not able to receive a response from the person that said this, and now I'm just trying to gather info before attempting this.

bigpoppapaul said:
My question is, I was told that it would be "trickier" to flash the custom ROM because I have already updated my phone to 4.3 stock.
Click to expand...
Click to collapse
I was under the same impression after I upgraded my N7105T (Australia - Telstra) to 4.3 as well.
The reality is that it is not trickier in the slightest. What did happen for me upon the initial flashing of the ROM from Philz recovery was that I was stuck on the initial boot logo until I pulled out the battery and restarted my phone in Philz recovery again. I then flashed the bootloader, thinking that was why it got stuck. After that, all went just fine after performing the installation/flashing again in Philz recovery. I performed a reboot into recovery after the install was completed, factory reset the handset and all was fine thereafter. I was able to restore my data as well as the majority of my apps. Some needed reinstallation, such as phone banking for obvious reasons but all in all, it was very much the painless process.
I'm really happy with it now. I just recently flashed it with the AGNi kernel as well, which was a nice improvement though I've changed from the zzmove battery profile to zzmove optimised profile to see if I still get any issues with apps slowing down to a grinding halt before needing a reboot of the handset to get it back up to speed again.

4.3 bootloader for n7105
Artstar said:
I was under the same impression after I upgraded my N7105T (Australia - Telstra) to 4.3 as well.
The reality is that it is not trickier in the slightest. What did happen for me upon the initial flashing of the ROM from Philz recovery was that I was stuck on the initial boot logo until I pulled out the battery and restarted my phone in Philz recovery again. I then flashed the bootloader, thinking that was why it got stuck. After that, all went just fine after performing the installation/flashing again in Philz recovery. I performed a reboot into recovery after the install was completed, factory reset the handset and all was fine thereafter. I was able to restore my data as well as the majority of my apps. Some needed reinstallation, such as phone banking for obvious reasons but all in all, it was very much the painless process.
I'm really happy with it now. I just recently flashed it with the AGNi kernel as well, which was a nice improvement though I've changed from the zzmove battery profile to zzmove optimised profile to see if I still get any issues with apps slowing down to a grinding halt before needing a reboot of the handset to get it back up to speed again.
Click to expand...
Click to collapse
Hi please where can I download the 4.3 bootloader for n7105? I already flashed the rom but wife not working. Devil kernel not working well too.

ibblaw77 said:
Hi please where can I download the 4.3 bootloader for n7105? I already flashed the rom but wife not working. Devil kernel not working well too.
Click to expand...
Click to collapse
Was it absolutely necessary for you to quote my entire message when it had very little to do with your question? Please just use the reply button instead of the reply with quoting next time. It will clutter the forums a lot less.
As for your wife not working, I would suggest a divorce.
For the rest of the things you're seeking, I searched the forum and found everything I needed.

Sorry quoting yoi
Sorry I quoted your entire post.
If I had an answer, I won't border asking for help cos I still can't see how you have helped me with your post.
Thanks anyway

In searching through the forums and Google, I found only bootloaders for N7100. What I did find was recommendations to simply upgrade to the official Samsung 4.3 release using Kies and then following the installation procedure for DN3.
Not sure why I'm only seeing N7100 versions of the MJ5 bootloader but everything is smooth on my N7105T with the MK2 bootloader.

Artstar said:
I'm really happy with it now. I just recently flashed it with the AGNi kernel as well, which was a nice improvement though I've changed from the zzmove battery profile to zzmove optimised profile to see if I still get any issues with apps slowing down to a grinding halt before needing a reboot of the handset to get it back up to speed again.
Click to expand...
Click to collapse
Thanks for the response, I ended up doing it and much like yourself, it went beautifully. I'm quite happy with it. I haven't really had any kernel issues so I'm hesitant to flash other ones unless they greatly improve something. Did you flash the the new kernel because of the app slowdown issue you were having? Or just to improve performance in general?

It was to beef up the phone's performance in terms of power consumption but that seemed to work against me.
"If it sounds good to you, that's all that matters. " - Artstar

Note 2 i317, AT&T variant WiFi not working
srinuscooby said:
Hi Everyone,
[/SIZE][/COLOR]
Now, prerequisites...!
Procedure...!
Disclaimer:
credits
​​​​​
Click to expand...
Click to collapse
The rom works like a charm, except for a gimmick: The WiFi is not working. Tried flashing a wifi patch and it worked, but then the camera stopped working. After hours trying to make the camera work, now it does but the wifi does not.
When I try turning the WiFi on it just switches off automatically. Also flashed Devil Kernel, Toooiiko (or something of the sorts) kernel, and they just made the problem worse by fixing the wifi but no camera AND no mobile network of any kind. :rolleyes
Any ideas/suggestions are more than welcome.

GaboCed said:
The rom works like a charm, except for a gimmick: The WiFi is not working. Tried flashing a wifi patch and it worked, but then the camera stopped working. After hours trying to make the camera work, now it does but the wifi does not.
When I try turning the WiFi on it just switches off automatically. Also flashed Devil Kernel, Toooiiko (or something of the sorts) kernel, and they just made the problem worse by fixing the wifi but no camera AND no mobile network of any kind. :rolleyes
Any ideas/suggestions are more than welcome.
Click to expand...
Click to collapse
Have u tried AIO fix, clear davik and cache.
I also had the same issue, after clean install with AIO fix and clear cache, it worked fine

Artstar said:
"If it sounds good to you, that's all that matters. " - Artstar
Click to expand...
Click to collapse
Hey Artstar,
I realize you don't like people quoting your entire posts so I thought I'd keep this one brief (not understanding 100% how XDA internals work, I wanted to make sure I got your attention by quoting you at least).
ANYWAYS
I have updated to 4.3 stock (vodafone) which turns out to be ML5 (from memory, phone is not working 100% right now).
Can I please ask (beg, lol) for a link to the bootloader you "flashed" to fix your problem? I've just:
1. updated to 4.3 stock
2. followed instructions on the DN3 V5 ROM install...
Now the first thing I've noticed is my phone won't detect my sim card :-/ So, into my old HTC my sim card goes! I need a phone for the morning, but would ideally like to have a note 2 with working DN3 rom... If you can help at all it would be GREATLY appreciated, as you said; I can't find a bootloader for the GT-N7105T... there are plenty for the other variants, but I really am having trouble finding one for ours.
This is very hopeful that my vodafone model is the same as your tesltra model based on the actual model number, but regardless I've got (and admittedly, I'm guessing a bit here) a dud bootloader installed and would greatly appreciate your input.
Thanks in advance mate, any help is much appreciated. I have searched the entire note 2 thread - perhaps my search skills are not up to scratch or perhaps there is no bootloader and I'm not understanding your instructions correctly.
Cheers!

Hi I am at official 4.3 jelly bean and my galaxy note2 GT N7100 is rooted and I want install ditto note 3 v5 rom on galaxy note 2 GT N7100 can you tell me proper steps from beginning how to install this rom on my phone
Sent from my GT-N7100 using XDA Premium 4 mobile app

MIUI for Note 3 - Talk & Troubleshooting

Hello,
I installed the official MIUI 4.7.4 build on my Note 3 N9005, all I get is a black screen after a reboot. I can get to Downloadmode and CWM recovery, so I got that going at least ^^
Things I have done:
- Flash via CWM
- I did the regular wipes and clearups
- I waited about an hour for the first boot, but nothing
- 2 restarts with 30 minutes waiting time for boot each, but nothing
- Installed it again after wiping a second time
The version is for N9005 (which I have), so this couldn't be the problem either. The downloaded file is also complete and not corrupted or anything. What did go wrong?
Edit: Solved. Philz Recovery was required for install.

Pumå said:
Hello,
I installed the official MIUI 4.7.4 build on my Note 3 N9005, all I get is a black screen after a reboot. I can get to Downloadmode and CWM recovery, so I got that going at least ^^
Things I have done:
- Flash via CWM
- I did the regular wipes and clearups
- I waited about an hour for the first boot, but nothing
- 2 restarts with 30 minutes waiting time for boot each, but nothing
- Installed it again after wiping a second time
The version is for N9005 (which I have), so this couldn't be the problem either. The downloaded file is also complete and not corrupted or anything. What did go wrong?
Click to expand...
Click to collapse
I read you need phillz recovery.
Where did you download it? I can't find a link
Sent from my SM-N9005 beast of a phone.

Sammath said:
I read you need phillz recovery.
Where did you download it? I can't find a link
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
Yeah, I read that too somewhere. I will report later if it worked with Philz Recovery
Edit: Awesome, it worked!
To anyone encountering the same issue: Replace your CWM recovery with Philz Recovery, and install MIUI with Philz Recovery...then it should work!
You will be stuck in the bootanimation after the MIUI install, wait 10-15 minutes first, if nothing happens, just press and hold the Power-off button until the phone shuts down and restarts again. Then MIUI shouldn't be stuck anymore.
First impressions: Bloody brilliant! Everyone loving a beautiful lightweight Android should get MIUI!
Everything seems to work fine. Make sure you install Google Apps alongside MIUI.
Samsung features: S Pen works perfectly, you just won't see the floating pointer indicating where you are. As it is the first version, it will be only a matter of time seeing MIUI builds with that kind of adjustments for the Note 3 So exited!

Pumå said:
Yeah, I read that too somewhere. I will report later if it worked with Philz Recovery
Edit: Awesome, it worked!
To anyone encountering the same issue: Replace your CWM recovery with Philz Recovery, and install MIUI with Philz Recovery...then it should work!
You will be stuck in the bootanimation after the MIUI install, wait 10-15 minutes first, if nothing happens, just press and hold the Power-off button until the phone shuts down and restarts again. Then MIUI shouldn't be stuck anymore.
First impressions: Bloody brilliant! Everyone loving a beautiful lightweight Android should get MIUI!
Everything seems to work fine. Make sure you install Google Apps alongside MIUI.
Samsung features: S Pen works perfectly, you just won't see the floating pointer indicating where you are. As it is the first version, it will be only a matter of time seeing MIUI builds with that kind of adjustments for the Note 3 So exited!
Click to expand...
Click to collapse
to have S pen and all it´s glory we need a ported version of MIUI in a TW base.. ( PLEASE IF ANYONE COULD DO THIS)
this one for sure is CM base...
btw tried it very good rom

Battery impression

@btimeh
The battery life is amazing in MIUI - it was one of the things I was watching first.
I seem to get about 1 to 2 hours more of battery life compared to any of my previous TouchWiz ROMs like X-Note or Omega...well it is obvious because MIUI is very lightweight and isn't filled with junk or features noone uses. MIUI is also faster than anything you have seen.
I am using the stock Kernel and get these good results. And that with the first MIUI version ever, who knows how even better it can get in the future.
Yes, there are some bugs for now, but these things will be fixed soon. For being the first version, it amazes me how good everything is already

Great,will test asap.

I tested the rom and put back my backup. This is close to daily use but for some reason I can't use whatsapp. It will fc and Google playstore does fc as well after you've installed it. Also I keep getting that my system storage is full (even though it's not) still as smooth as ever tho, just not rdy for daily use yet. We'll at least not for me
Sent from my SM-N9005 beast of a phone.

Sammath said:
I tested the rom and put back my backup. This is close to daily use but for some reason I can't use whatsapp. It will fc and Google playstore does fc as well after you've installed it. Also I keep getting that my system storage is full (even though it's not) still as smooth as ever tho, just not rdy for daily use yet. We'll at least not for me
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
Yeah, WhatsApp isn't working. But they will fix it soon.
All Google Apps do work though, which version did you install? I installed the gapps-stock 4.4.2 (20140608), everything works fine.
Your system storage shows to be full? That is strange, I don't know what could have been the cause. I had something like that on some other ROM in the past, I wiped the internal SD card and formatted /system with CWM, then installed again (make sure keeping the .zip files on external SD ^^). It had worked for me.

I did wipe everything. I installed the rom 3 times just to try. I'll wait till whatsapp works in the following update and I'm ready to use this baby daily
Sent from my SM-N9005 beast of a phone.

Sammath said:
I did wipe everything. I installed the rom 3 times just to try. I'll wait till whatsapp works in the following update and I'm ready to use this baby daily
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
Yeah, in this case it would be better to wait. They released an OTA update today (4.7.4 to 4.7.6), but it did not fix WhatsApp yet

I just installed another version from another maintainer and whatsapp works! Also the rest works now, no problems with anything anymore!
Sent from my SM-N9005 beast of a phone.

Sammath said:
I just installed another version from another maintainer and whatsapp works! Also the rest works now, no problems with anything anymore!
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
I updated to 4.7.6 and whatsapp and whatsapp+ still didnt work....prove it
Sent from my SM-G900F using XDA Premium 4 mobile app

This OK?
Sent from my SM-N9005 beast of a phone.

@Sammath, can you provide a link

Sure, slow as hell like the other link tho hahaha. Took me 2 hours to dl http://miuirom.xiaomi.com/rom/u10091389/4.7.5/miui_9005_ws008_4.7.5_02028d1f4e_4.4.zip
Sent from my SM-N9005 beast of a phone.

Sammath said:
I just installed another version from another maintainer and whatsapp works! Also the rest works now, no problems with anything anymore!
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
do you have S pen features and multiwindow working??

Is there any way to change the language?

camaxa said:
do you have S pen features and multiwindow working??
Click to expand...
Click to collapse
no, this rom doesn't have any of that.
fertippt said:
Is there any way to change the language?
Click to expand...
Click to collapse
You can change it to English and that's it.
Sent from my SM-N9005 beast of a phone.

My whatsapp doesnt work. Plus doesnt work too.
Should i load the rom from your link? whats the dieffernts?